Portege 7220CTe he's - USB dock does not work properly
I have a portege 7220, with Dock he's using windows 98se.
I have 2 usb ports on the dock, one that I use for mouse, 2nd I use for hard disk USB, cards memory sticks etc. When I start with 2 installed, often they will not work. Installing after startup does not work either. MILADI repairman told me to bring pc + dock in because they think it's a hardware problem. But sometimes, the usb works with 2 installed users. Who can help me? BIOS (ACPI version 1.70, 29/09/00).
Hi Buk
Trust me on this path is not easy what's happening with your USB ports.
Do you have similar problems if you use the USB ports on Portege itself?
As you know the signal USB is just loop through and there may be a problem with the circuit of the port replicator.
I really put t think you will be able to solve alone.
Good luck!
Tags: Toshiba
Similar Questions
-
R500 + Dock + fingerprint USB keyboard does NOT work properly
USB keyboard does NOT work before Windows logon. (Start-password to type with the laptop keyboard) Also the external keyboard fingerprint reader does never work in this configuration.
(With my old Z60m, same keyboard and docking station even works well, except the startup password must be entered with the keyboard, the keyboard USB fingerprint reader does NOT work at this point.)
R500 2732-6AG Vista Business
Battery ThinkPad Advanced Mini Dock
External USB keyboard with fingerprint 41A 5262
Jochen
New software of fingerprint for ThinkPad R400, R500, T400, T500, W500, W700, W700ds, X 200, X200s, X 200 Tablet, X 301 does not support the external fingerprint reader
Click here to view the details of downloading new software.
Click here to view the details of download for older software.
On the software page oldest, you will notice that the keyboard agroenvironnemenaux USB and USB fingerprint reader.
-
Mouse - touchpad and USB - HID - does not work properely on Satellite L40-139
The mouse is very unstable. Mouse touchpad both usb do not work properely, but the touchpad a little better. It happens that, even if the mouse using USB to the point does not move, while the left and right button are always react.
It is brand new computer (L40-139) with initially installed Windows Vista. How can I solve the problem?
It is very disturbing. Thank you.
Hello
have you ever tried to recover your machine, which means a complete reinstallation of your system? First: to exclude the material errors, you must perform this step, and if the error persists, then I suggest you to contact a service partner chartered for a checkup of material and a repair action.
If the problem occurs after reinstalling windows, visit the following link to find the closest to the ASP available in your country:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Greetings
-
Satellite M40: USB Audio does not work properly in ACPI mode
Hi all
I just bought a laptop Satellite M40 whose purpose is to be used as a portable audio system.
For this, the USB audio devices are an excellent solution.Unfortunately, although it was working properly when recording (sound is perfect with all devices compatible USB Audio, I have tested), there is a problem in reading that I had a lot of clicks and POPs.
After a lot of research trying and google, I solved the problem by changing the computer ACPI PC Standard mode.
This is a workaround.But this way, I don't remember what my status of battery, and my laptop does not shut down automatically.
Actually, my laptop is no longer run as a laptop :(I suspect a very serious problem in a Toshiba components management. In particular, I wouldn't be surprised to be told that freeze the cords of some regular system of court management, and therefore the 10ms buffers audio USB fall in against the recess.
This would be so much bother me if I were not part of the technical support team of the company that launches also a few new audio USB products who will not fail to work correctly with laptops.
My question is:
Is there a driver / updating bios that gets rid of this problem?
If a person of Toshiba technical support to address this issue directly with me, I'd be happy to help, as I am personally and professionally concerned.Thanks in advance.
[Edited by: admin]
Hello
I put t know what USB audio device you use, but most of the USB audio devices cannot use the USB power. These devices have need of an external power supply of A.C and especially this external power supplies are delivered with the USB audio device.
Also, I read on some sites that the pop occurs sometimes due to non synchronicity of the modules different buffers or / and of the use of certain applications in parallel.
The computer ACPI PC Standard mode change is one of the many solutions and proposals
You can check some patches from Microsoft. Check if all updates from Microsoft are installed.
Also change the performance options in the options of the system to adjust for best performance.
Disable Windows messenger.
Virtual memory should be set to custom size and initial size and maximum size must has the same value (ie. 512/512)
In the system.ini should the vcache is also the same: MinFileCache = 16384, MaxFileCache = 16384
Disable the peripherals such as scanner, printer.As you can see, these issues could occur on all computers (desktop and laptop) and it s is not a problem of Toshiba. Also, contact the manufacturer for support external audio device and detailed information.
Good luck
-
Equium A60: USB Port does not work properly
Hello
I recently bought an external hard drive and every time that I plug it into a USB port it says
'A trendy High - Speed USB device on a non-high speed USB hub'
I guess I need to download a host controller driver, but I can't seem to find one not where does on have an idea what I can do.
It is an Equium A60
No info would be appreciated cheers
Hello, SK
I found an interesting technology high speed USB article.
Please take a look at this site:http://www.Microsoft.com/windowsxp/using/networking/learnmore/jones_02august05.mspx
Good bye
-
Ethernet USB adapter does not work after update to sierra mac
Ethernet USB adapter does not work after update to mac sierra.
Please solve this problem as soon as POSSIBLE
Hello guatamshah,
If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.
The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
Reset the management system (SCM) controller on your Mac.https://support.Apple.com/en-us/HT201295
How to reset the NVRAM on your Mac.
https://support.Apple.com/en-us/HT204063If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
OS X: about system information and System Profilerhttps://support.Apple.com/en-us/HT203001
If she does not appear in the information system, see the articles below.
macOS Sierra: If a USB device does not workhttps://support.Apple.com/kb/PH25343
macOS Sierra: check your device's USB connection
https://support.Apple.com/kb/PH25567
However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.
macOS Sierra: Add a network service
https://support.Apple.com/kb/PH25279If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!
Kind regards.
-
USB ethernet does not work after update to Mac OS sierra
Hello
I use end of 2014 Macbook pro 15 "running Mac OS Sierra.
Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.
Please advise and thanks in advance.
Do you use the Thunderbolt Apple > Ethernet card?
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
https://support.Apple.com/en-us/HT201295
Subject of memory NVRAM and PRAM
https://support.Apple.com/en-us/HT204063
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
https://support.Apple.com/en-us/HT201262
-Start to recovery and repair the startup disk
OS X: on OS X Recovery - Apple Support
https://support.Apple.com/en-us/HT201314
The adapter works in recovery mode?
This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.
-
NB200-12N - USB port does not work
Hello
I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
But does not work.Thank you
Paulo
If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.
Try reinstalling the chipset utility.
By the way: two other ports work well, right?
-
Satellite L650 - 12N USB Ports does not work
My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
It shows a yellow exclamation mark on my system.I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
Under the key USB gives error code 43, I do not understand.The webcam and the wireless card no more.
This boot problem after a storm in my area some time ago.Please can someone help.
Thank you
SaniHello
> This problem start after a storm in my area some time ago.
Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems
I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.
But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you
-
I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?
If you have any documents open in Keynote 5 then you will not be able to drag it to your Dock. IF a right-(control) - click the Keynote icon 5 shows Quit in the drop - down and then select Exit. Now you should be able to slide your dock.
It is often necessary to drag it from the dock, drag the icon quite some distance from the dock (to what the REMOVAL appears on the icon).
You can also right-(control) - click the icon select Options, and then, in select Options remove the dock.
-
El Capitan USB port does not worked well under Yosemite.
Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
Has worked perfectly under Yosemite unfortunately too long to go back.The USB port does not work with other USB devices?
I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.
http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1
-
My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports. What can I do to fix this?
Do not use windows update for drivers.
Update your drivers Lenovo support and see if that helps
If the lenovo is new, you can contact Lenovo support to asertain why usb3 ports apparently do not work
-
Keyboard does not work properly
Hello
I had trouble getting my laptop satellite to initialize. Recovery disks & pressing F keys weren't working so I decided to open the laptop to see if there are any loose connections. To my surprise, the laptop seems to work again once I had the USB keys and put back them in! Unfortunately, before that I did, I opened the keyboard and peeked inside.
When I booted up and tried to use the keyboard keys half of their work and the other half seem to think that they represent two other keys for example if I type the letter 'E' I get '3' and '-' as a whole. After 5-10 minutes the entire keyboard will become totally unresponsive until I restart again. Of course, I think I've done something here because this problem since I opened the bottom of the keyboard. This could be a hardware failure I have caused or is anyway that this issue can be resolved without replacing anything?
Thank you very much
Tom
Hi Tom
Theoretically, it might be just a connection lost between the keyboard and the motherboard, but I'm afraid, it can be a serious problem of m.
Maybe you have damaged the connector of the keyboard cable or something similar, and not the keyboard does not work properly.I think the keyboard needs to be replaced to check if only this part is affected
-
Satellite L670 - after Win 8 upgrade WIFI does not work properly
Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.
The connection only works some time, usually only a few seconds before the connection is lost.
After a few seconds or minutes the connection is restored, just soon to be lost again.Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?
Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...
To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.
But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
The device was working properly under Win 7?I would recommend running a few Wlan test.
For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test. -
Satellite P25-S520 - DVD player does not work properly
Difficulty of DVD player or buy the external drive
My DVD player does not work properly, in fact it can never work properly. Recently, I tried to back up my PC on a DVD using Norton 360. Norton did not recognize that the DVD was present. Then I tried to write a text file on a DVD and was a failure. DVD + R and DVD-R media were found to be (Maxwell 16 X).
I could have probably lived with this however, I received a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my laptop nearby and it was recognized.
An attempt to update the driver has also fails.
I was able to copy a CD of music last night so that at least works properly.
Does anyone know how can I fix? The important part is to be able to load my new program.
Research on some forums I found that other people have had problems with the Pioneer drive. If the drive can't be fixed, I'm not adverse to buying an external DVD drive. Unfortunately, where I live there is no brick and mortar stores selling external drives and I prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can someone suggest an external USB drive that will read and write CD and DVD and is certain to be compatible with my Toshiba?
Thanks for any help,
Humbaba3000BCSatellite P25-S520
PIONEER DVD - RW DVR-K12D
Driver provider: Microsoft
Driver date: 01/07/2001
Driver version: 5.1.2535.0
Digital signer: Microsoft Windows PublisherAny external USB CD/DVD drive will be compatible with your laptop.
However, you won't be able to boot from CD (run recovery for example) If you are using an external drive.
So, your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and request a quote.
Maybe you are looking for
-
Light said speaker speakers are disabled when they are on. I want that they, want just to say that they ' re on.
-
Satellite L300 - after installing XP it does not find the WiFi router
After insatlling XP SP1 and insatlling a lot of everything except drivers WLAN works. I installed the drivers and I install Atheros to manage my connections, but it seems not yet to find the wifi router. I use toshiba satellite l300 pslbce.PS! I had
-
What Miss me? How do you send a fax without a phone line? I'm in the market for a color MFP laser to include fax. The models mentioned and many others, have no RJ-11 plugs. I guess you can send it via the internet or mobile phone, but it is not good
-
attachment scan slides for 5200C
I have an old backup computer running Widows XP in conjunction with HP 5200C scanner. I have the slide analysis attachment for the scanner, but cannot operate. I don't have none of the operating instructions.What should I do?
-
Cast: more specific type where the object EXPECTED
I extend an interface that expects an argument of type Object. My implementation of this interface knows that the object passed is a specific class, I've defined. I can't compile my code no matter what I try, because of the error "incompatible types.