Portege A200 - Windows Update

Similar Questions

• Portege M400: Windows Update problem

  Hi, I have a Portege M400 and I have windows XP is installed. Whenever I try to download and install new updates to Windows, I get an error saying that none of the updates have been installed. I have tried to re - download and reinstall updates once or twice, but I get the same message. Someone knows how to fix this?

  I refer to www.microsoft.com support sites because this isn't a problem with your machine, it s more a windows problem.

  I guess when to check microsoft support sites, you should quickly find a solution to your problem.

  Welcome them

• After loading Windows - crashes BSOD on Portege A200

  Portege A200 Windows XP;

  Before windows has finished loading a blue screen appears and the machine stops. Prior to that, the machine was intermittenlty off without apparent reason. The last thing I did before this happened has been updated to IE 7. Ran scandisk, but has not fixed anything.

  Can start in safe mode but impossible to uninstall IE7 in safe mode. The option selected to load windows last config that worked to option, but windows crashes before the end of loading. Restoration of the system to consider the return to January 08 but still the same problem.

  Any advice would be appreciated.

  In this case, I would recommend do you a clean installation of OS. As you can see that nothing done. I don't really know what you can try, but I really don't think that you will be able to do anything.

  Save all your data important and make the clean OS installation. I know it's quite radical solution but, believe me, one that suits.

• Windows update error 80072efd on Satellite A200

  Hello

  Doesn t work on my Satellite A200 Windows Update. When I try to search for new updates, after ten minutes is displayed error 80072efd. Of course, I ve done all proposed solutions, but no result. OS is Vista Home Premium and it has that Norton Internet Security is installed as a firewall.

  I tried starting windows update when Norton firewall has been turned off, but the result was the same error 80072efd.

  Anyone know what I can do more?
  Concerning
  Piter

  Hello

  Have you already checked this article http://support.microsoft.com/kb/836941?

• Satellite A200 - after Windows update games in the small window

  Hello

  I have a Toshiba Satellite A200 bicoeur vista Home premium.

  I have just re installed windows and installed a few games of children. They work well in fullscreen without problems. But after doing a Windows update that they are only now working in a small windowed screen surrounded by black.
  I tried to resize resloution you name and still nothing. But I can't work on it all can help me?

  Thanks in advance

  Hello!

  Have you tried to update the display driver? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You have reinstalled Windows with the Toshiba Recovery disk?
  What you have tried to solve the problem?

  Good bye

• Satellite A200 restarts continuously after Windows update

  Hey all,.

  The model Satellite A200 - 1 GB (PSAE6E) worked perfectly for two years now (with Vista 32-bit).
  Since running windows update yesterday and restart, the laptop summer stuck in a reboot loop, restart immediately after the 'POST' (the Toshiba logo, etc) screen with a flash of blue screen.
  Holding F8 to read the message, it says INACCESSIBLE_BOOT_DEVICE (0x000007B)...
  Try to restore to a point before the blackout failed for an unknown reason (gave an error).
  Search in Google gave a possible cause - maybe the hard disk driver was changed by an incompatible type. There were some suggestions to turn off the AHCI in the bios, but it doesn't have this option.
  The bios was not updated since purchase (this is version 1.4), but I can't update because it seems that the only update provided by Toshiba requires windows.

  Someone has any idea how to fix the computer without having to reinstall windows? No matter what?

  Thanks in advance,
  Ofir

  Hello

  I doubt that it could be a hardware error (my personal opinion) but nothing is impossible, that you know
  The fact is that a BSOD can be caused by hardware error, but also a serious software problem
  In my opinion, something went wrong during the update

  If you are not able to boot the operating system even by using a safe mode then a new install of the OS would be the last chance to get this sort problem

  I think you should try a new installation to see if this could be a hardware problem because there is a small remnant of risk that this could be a hardware problem

• Portege R500 - Vista does not SP1 using windows update

  I just got a new Portege R500.

  Do not specify the information of Windows Vista Service Pack 1, so I guess that's not?
  But the automatic windows update does not offer to install SP1.

  What I have to do it manually? How?

  The other question is: is it OK to do, or are there many problems with drivers after that.

  Please help out me.

  Hello

  First update of Windows is always desirable and SP1 is really necessary, because it fixes many bugs in Vista.

  One of the reasons why Windows Vista doesn't automatically update the SP1 version, is that SP1 can be installed.
  Check if SP1 has been installed. To do this follow these steps:

  1. Click Start, right-click computer and then click Properties.
  2. Windows Vista SP1 is installed, you will see a reference to Windows Vista SP1 is displayed at the bottom of the Windows edition section

  However, I found a useful document of Microsoft Knowledge that could help you to update SP1
  [Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates | http://support.microsoft.com/kb/948343]

  See you soon

• Satellite A200-10W: I lost dual-mode Touchpad after Windows update

  I got a satellite A200-10W. The touchpad worked well at the beginning. Then, an update of windows has been installed and I lost dual mode on my touchpad.

  It is for me a normal function as a touchpad, but the mode button does not work. It lights, it do give me the button options, volume control does not work it did not scroll even in normal mode either.
  I reinstalled the drivers both synaptics and alps, but nothing helped.

  How can I ever use dual-mode again?

  Thanks for any help!

  Hello

  Very strange I didn't noticed any problem with the touchpad after the windows update.
  I have updated my windows and then lost the sound. After restarting again I ran the update and the Øresund back

  But if you, it seems that the MS updates could be a bad influence on the functions of touchpad.

  Have you chosen the touchpad drivers just for the PSAECE series?
  The Synaptics Touch Pad driver to set the properties and the touch pad control functions.
  And the Alps Electric Touch Pad Driver allows you to set the properties and functions of mouse control.

  Perhaps you need to configure the settings again after the new installation of drivers touchpad?  :|

  But have you tried to update to Windows Vista again? Sometimes, you have to restart the laptop to get all the necessary updates that will fix the problems.

  In a value of the case, recover the laptop and does not perform the updates of windows

• Portege A200 - Freeze or crash itself

  Hello world

  I had a problem with my Portege A200 to a crash on the HARD drive for the gel. Also I was the product of recovery toshiba on this subject and also replace a new HDD, then it is still frozen when I turn and run. Therefore, it is always random gel costs new window XP and also sentive on the network when the network card then it is freeze or crash himself.

  An idea for solving the problems there?

  Thank you
  Jonathan

  Hi Jonathan,.

  If this happens always after using the Toshiba recovery disc, it seems to be a hardware malfunction or something else because the recovery disc can restore the factory settings.

  Maybe your laptop is overheating so you clean with a jet of compressed air. This could blow out the dust from the cooling fans. In addition it s not necessary to disassemble the laptop.
  Check this box!

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?

• Hard drive with the Portege A200 problem

  I just bought a Portege A200 a few months previously and recently noticed the hard drive starts to make noise 'rough '. Anyone can:
  (1) advise what could be the problem, or is this normal?
  (2) to recommend what is the best way/tool/program to check the State of fitness of the hard drive?

  Thanks for help. Very happy.

  Specifications:
  Portege A200; 60 GB; Window XP Professional

  Post edited by: ccm76

  Hi ccm

  In my opinion, the HARD drive should run pretty quiet. You can still hear sounds, but they should not be strong. If the unit is a new brand, you must contact the partner in your country, and they can check if there are a few HARD drive malfunction. If it is necessary to change something, the warranty will cover all costs.

  Hi stan

  Sorry, but you should be smart enough to know that this kind of information is not for advertising. On this way, each stolen unit can be started. The best solution is to contact the Service partner and they can remove the password.

  Good bye

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye

• Portege A200 - cannot boot from the recovery disc

  Hi, I have a Portege A200 and an original unused Toshiba Recovery CD.

  When I go to recover, the DVD drive just turns and turns and nothing happens. I have tried different methods of booting with the disk to like, by pressing the C key, select boot from CD/DVD or just turn it on with the DVD in the drive. Same problem, the disc turns right away.

  I also checked the drivers TOshiba download page and let down when I found out that there are several drivers for the same thing, like the 3 drivers LAN! Which should I use? Also, I can confirm that the CD/DVD drive works fine because I already loaded windows XP, no problem.

  Any suggestion is appreciated.

  Kieran99.

  Hey Kieran99,

  I also think that s is not a problem of the CD/DVD drive. If it turns over and over again once he recognizes a disc but it can t be read correctly.

  Regarding your question about drivers I think that it of fairly easy. I can recommend the vendor and device ID in Device Manager. With these identification numbers, you can search on this website http://www.pcidatabase.com/ to determine the LAN controller. All that s! :)

  In addition, you can check the ID s in Device Manager, if you click the LAN card properties > Details > PCI\VEN_xxxx & DEV_xxxx

• Re: Vista SP1 - cannot see in "windows update".

  Hello

  you just bought Satellite A200 (PSAE6) and when I look at the updates, I don't see anything on vista SP1. I can do, or there is no need to download SP1?

  Thank you

  Hello

  I agree with Jason. Sooner or later, you will see that SP1 listed in Windows update Center.
  To install SP1, you must use the automatic update of Windows because the size is much smaller.

• However, I tried again & again, I can't install Windows update Code 80070020.

  I have a laptop Toshiba Satellite A200 & am Windows Vista - Home Premium.  VERSION: 6.0.6002 Service Pack Build 6002. Can you help me please?

  See: error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates
  http://support.Microsoft.com/kb/883825