Portege A600 - multiple problems (windows 7, wifi, mouse pads)

Similar Questions

• Portege A600-128 - no card detected WiFi and no sound through headphones

  Hello
  I recently encounter some problem with my portege a600-128. Not illustrated, wireless network adapters a so no wifi detection, more when using headphones, realtek HD audio software detects them being plugged, but no sound is not output - I was wondering if it is a problem with the software, or perhaps of a damage...

  Re: wifi, I tried to download the driver realtek_wlan_20100225.zip on the site, but nothing has changed. In fact, the single adapter in Device Manager is the adapter broadband toshiba f3507g mobile, and in network connections, I don't see this one. Try to "find the hardware changes" in Device Manager only managed the laptop to realize that my Alps pointing device (touchpad) is not installed (if she always worked and always made)-trying to install tpdrv-20081103180427. ZIP has not changed anything...

  Thanks for any help!

  Hey Buddy,

  Have you checked if the WiFi is enabled by using the FN + F8 key combination? If your laptop is a hardware WLAN switch, it must be defined on IT!
  In addition I recommend you load the default settings in the BIOS.

  On your sound problem, have you tried to update the audio driver?

• Portege 7200 multiple problems

  Hello

  It is my last ditch attempt to try and get some sort of difficulty for my Portege 7200.

  I will try to explain as best as I can, so this is.

  I had a system dual boot (Linux & Win98), did not want Linux HD so formatted and reinstalled Win98.

  Everything works except for a few problems that I hope you guys can help with.

  1. at startup (before windows logon) I am invited with cannot find VREDIR. VXD and a few other VXD files.

  2 screen dislikes the adapter PCI/AGP of Trident Cyberblade e4-128. Only the driver installed, that followed the instuction on the Toshiba tools and utilities cd-rom. keep getting invited to change my display at startup configuration. Once logged into windows screen does not match the entire screen (black border). Have used the companion disc one receives with the Portege to stretch the LCD. The screen is bigger, but the display quality is bad.

  Can anyone help as I am at a loss on any one of the above point.

  Kind regards

  Joe

  P.s. If there is more clarification or information then pls let me know and I'll try my best to get it.

  Hello
  most likely, these files are not at all. This message usually when these files become 'independent' in the registry, or when certain network/protocol device missing files.
  The problem with these files occurs generally when you install something in the network control panel that does not install correctly.
  If you have recently installed a network adapter or Protocol in your system, remove it and reinstall it.
  The IPX protocol is often also responsible for this message.

  Good bye

• Portege R700-1CQ - ECO Utility and buttons mouse pad not working not

  Suddenly the ecoUtility buttons and activate/deactivate mouspad has stopped working?

  The ecoUtility works if started manually through programs but is not starts when you press the ecoUtility button...

  The mouspad is not disabled if you press the button...

  I already deleted and reinstalled the ecoUtility and value added package - no results?

  It runs under Windows 7-64 bit...

  The help is apreciated...

  Concerning

  Hello

  Hmm. you are able to activate the Eco utility manually, but it does not start automatically when you press the button.
  This means that there must be a problem with some command buttons that run the applications.
  Usually the PPV control multimedia keys and so the new facility should fix this.

  I think you should try this;
  Firstly uninstall the VAP system.
  Then, clean the windows operating system using the free tools like CCleaner for example.
  This tool cleans garbage temporal files and the registry.
  I think that some damaged registry entries can cause this
  Restart the computer and then install 64-bit VAP.

  Good luck

• 3G problem on Portege A600 - off Radio

  Hello

  I have a Portege A600-13Y with Windows 7 32 bit. I installed the latest drivers for 3G and utilities of this thread.
  [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=178251𫡋]

  My SIM card O2 is detected by the Toshiba Wireless Manager but there is a message

  "* Radio is disabled - to activate the mobile switch on."

  (German: "Funk ausgeschaltet ist.) (" <> Zum Einschalten Notebook-switch briefly").

  So the problem is, I have found no switch for WWAN.

  Anyone have the same problem or can anyone please help me with this problem.

  Make sure that the WLAN switch is turned on and the orange light is on also.
  After that, use FN + F8 key combination to turn it on.

  Whose options you can see with FN + F8?

• Portege A600-175 - failed to start the card reader device

  I got a Portege A600-175 running windows XP SP3 with a problem in the card reader device. Insert an SD card, it makes the sound that USB devices usually do when inserted (and also when it is removed) bur it doesn t appear on my computer. Do the Device Manager, it appears as a disc with an exclamation point on it and in properties, I see the error this device cannot start. (Code 10)

  I ve already removed the device and let windows find and install again but the problem persists.

  Thanks in advance for looking into it.

  Hi fjdc,.

  I think that you should look for an update to the driver on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Remove the old version, restart the computer and install the version of the Toshiba page.

• Mouse pad HP Pavilion A6 - 3400M

  Hello, I just got a laptop for school and I recently had some problems with it. I play a few games when I have time, but usually I use my cell phone for anything else then the school work.

  First when I exit or open Skype the sound that passes through my headphones sundenlly out from the speakers. A little weird and I have to plug my headphones, otherwise it will continue to do that. I also had an execution only one error.

  Second blue light of my mouse pad does not work when I turn on my mousepad. When I turn it off the red light is there and when I turn the mouse pad works perfectly. The only problem is the light around him does, as I said.

  Thank you for taking the time to read this thread and I hope you can help me solve my problems.

  the mouse pad can be enabled/disabled using fn + space

• Button Portege A600 - 133 Windows 7 64 bit problem

  After installing windows 7 64 bit on Portege A600-133, Toshiba or Toshiba Assist button a presenter button work. All other keys are working properly. How can I solve this problem?

  Hello

  Have you installed the latest VAP (value added package)?
  Toshiba page provides the last Win 7 VAP for A600 which is v1.2.40

  You use the latest version of the BIOS?
  Check it!

• Portege A600 - Windows 7 installation CD/DVD device driver

  Hello.

  I am trying to install Windows 7 Professional 64 bit on my Portege A600.

  I tried to boot from the DVD, flash. I changed all of the possible settings in the BIOS, I have updated the BIOS to version 3.0, but I still have this bloody error "a required CD/DVD drive device driver is missing". Is there a place where I can download this driver to show the installer without having to download a 100 TB of pron?

  Or is there a way to fix my problem?

  Hello

  First of all there is no special driver CD/DVD. It of a part of Windows 7 and so there are no drivers available.

  It would be interesting to know when you get this error exactly.

  Maybe your defective CD/DVD drive. You can test another?

• Portege A600-12O - impossible to reinstall Windows XP

  When reinstalling windows XP on Portege A600-12O, I get following error:
  Integrated HARD disk errors: the product recovery CD can not reinstall the operating system.

  As well, I try to install XP SP2 using Microsoft cd (.. .needless talk without success)...
  following error is flashed on the screen:
  A problem has been detected and windows has shut down to prevent damage to your computer.
  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

  Hello

  In my opinion, the Toshiba Recovery disk error message is very interesting and says a lot. What do you think about this?

  If your HARD drive is defective, you need a new and you are not able to reinstall the OS. Maybe your HARD drive needs to be exchanged.

  In your case I would contact an authorized service provider. Technicians can check your laptop and if it of under warranty, you should get a new HARD drive for free.

  Welcome them

• Portege A600 PPA60A - unable to download Windows 7 drivers

  I have an old PC of 3 months I'm trying to get upgraded to Windows 7. It's a Portege A600 PPA60A 01H00G

  I tried to use killed HIM and it fails at the step where it downloads drivers

  I then tried to manually download the drivers from this page:
  http://support.Toshiba-tie.co.jp/Windows7/download/PORTEGE_A600_32_au.htm
  But none of the th elinks on this page to work. I guess that's also why KILLED it fails during download too.

  Note that I'm in Australia, but for some reason any support Australian forum redirects here.

  Thank you

  Hi simon13,.

  Well, I tried to download drivers on the Web site that you posted but I can't notice t a problem. All three drivers tried to downloaded are worked correctly.

  Maybe it was a temporary problem and Toshiba did solve this problem. I think you should try it again. :)

• My wife and my daughters both UAC accounts saying now that they have multiple problems and insufficient for memory.

  My son used my daughter and wifes UAC because I had his safety to tight to his liking. My wife and my daughters both UAC accounts saying now that they have multiple problems and insufficient for memory.  My UAC (admin) is fine. I opened his account and it's good? It seems to me that all UAC accounts would receive if it were a virus? My wife and my daughter lost all the photos and several icons on the desktop. The Help window opens automatically when you connect. The two seem to have lost the Explorer, I am at a loss. Any suggestions?

  Hello

  'insufficient memory' and hidden data

  If this is the case you can be infected

  read the error messages wrong than some malware product to try to rip you off at the link below

  read the information at the bottom of the below link to the subject of some malware that hide your data files and the cure for it regarding

  Read article 17

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

  also follow the correct for that malware removal steps, just to be safe, let's

  _______________________________________________________________

  otherwise, the foregoing:

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Problem of button wifi HP Envy TouchSmart 15 j001TX on the upgrade to Windows 8.1

  
  

  Finally, here is the Solution for the ProblemsI facing point 8.1 of Windows in my HP Envy 15 J001TX (D9H44PA) TS

  1 PROBLEM Wifi button (led)

  -Cause - Bluetooth Incompatible Ralink driver (SP64082 Driver Wifi works fine)

  -How to solve the problem =

  Reset you first FORMATER THE System Partition (normally 100-500 MB size) when clean installing windows 8.1 (I don't know how to do after the upgrade via Windows store cause I never have I clean installed from the image ISO of Win 8.1)

  Then after installing Windows install Wifi button Driver Compitable with your system and of course to win 8.1 (SP63752 http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123643-1&cc=in&dlc=en&lc=en...  in my case)

  Here you can see the effective operation of the Wifi Button (F12 key) after restarting your PC

  Now if you install your old Wifi and Bluetooth Drivers you will ruin everything!

  THEN please INSTALL new WIfi driver Ralink (SP64082 that are currently compatible for win 8 but works very well and were available on the site, only last week here is the link http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-125308-1&cc=in&dlc=en&lc=en... )

  The driver Bluetooth Ralink (well SP64156 I do not know if it will work or not cause he doesn't get just installed on my machine gave error file not found and I never retried there are waiting for the Win 8.1 driver compatiblehttp://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-125314-1&cc=in&dlc=en&lc=en...)

  THEN the underlying problem seems to be Bluetooth driver and above the steps is how it will be fixed!

  In my view, FORMATTING of THE PARTITION SYSTEM is only average stuck reset who have dirtied the old Bluetooth driver!

  2. the NO work of BEATS AUDIO, other software and technology Intel Rapid Storage Technology bit

  The main cause is the INCOMPATIBLES INTEL GRAPHICS drivers...

  If you have installed the drivers Win 8 offered by HP on Win 8.1 What is causing many software malfunction!

  Then please download the latest drivers from Intel graphics for your laptop https://downloadcenter.intel.com/default.aspx (in my case 4600 Graphics Intel for windows 8.1 64-bit has been downloaded) it works perfectly!

  You must also install the updated Audio drivers (SP63555, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=in&dlc=en&lc=en... )

  Yes that's it everything works fine!  (I suggest that you do not install the Bluetooth driver until HP provides new compatible with win 8.1 setting the LED issue until then I suggest simply do not install and use bluetooth caue you must format the system partition whenever you need to reset the frame and for this we need to clean installation of Win 8.1)

  questions please answer!  tHNX

• Windows Vista/Defender telling me that I have multiple problems after update

  I use Windows Vista.  I've had problems since getting an update a few days ago.  Windows Defender is constantly telling me that I have multiple problems - if nothing has changed outside the Windows Update.  When I try to open my Convert (bought) the DVD program, it displays the message from the Red Cross stating that "Windows cannot access the specified device, path or file.  May not be the appropriate permissions for access you to them.  I should have all permissions on a computer at home.

  It would help if you gave the details of the messages you see Windows Defender.

  It could be that you have a fake antivirus infection similar to this:

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-enterprise-Defender

  A symptom of this would be applications for payment activate the software.

• Problems with wireless WIFI adapter. DWA-130 | Windows 7

  Hello

  I did a post on this a few months back and it has been partially resolved; I tried to get my wireless to work on Windows 10 WIFI adapter and the people trying to help me as I discovered that 10 Windows does not have to support the device.

  Now, I have a new problem. I recently, and recently I mean today, reformatted for Windows 7 because I'm not a big fan of Windows 10 (which is not because of my WIFI adapter doesn't work do not, it is mainly because of all the glitches that come with Windows 10 because it is so new). Sort of, I tried to install my WIRELESS card on my Windows 7 Desktop, and everything I did (I honestly don't know) I can't make it work... And here, if possible, why...

  

  I think that the "unknown device" could be my adapter. If so, that would mean he has not installed correctly and therefore is not working right (or not at all, in this case).

  How can I remove from my device manager? I have already used "uninstall Device Driver", and he says it uninstalls, but once I update the list, he's back again, this time with no way to uninstall it - I have to reboot the machine and then the option will pop up but then if I refresh it, it'll be welcome back here - now, it will not disappear.

  My WIFI adapter is called "DWA-130" and the model number would be "DWA-130F1.

  Help would be very appreciated.

  The problem has been resolved.

  Thanks for any help, in the end, I copied files from disks on my desk (before copying them, I just tried to use the DISK itself), then I went in "Devices and printers" clicked on my device (the "802.11 n WLAN [DWA-130]"), then went to "Device properties" and "Update Driver". I went to my office through the teleprompter and then when I was in the files on the disc, I went into the folder "Setup" and you press 'OK', in which he finally started to install the necessary drivers and you read this, I use my wireless adapter to access my internet.

  One thing to note;

  Once it was installed, I went to the 'map settings' to connect to a preferred network, and some networks were visible. So I had to add mine in manually, once I added it manually, the WIFI indicator on my taskbar, when I opened it, all the other networks in my neighborhood was now visible as well.

  I hope I helped someone with problems.