Portege M100: Blue screen during recovery

Described in the manual involving cd recovery results in blue screen of recovery: fault: 0X0000007B (7 B 94528, OXC 00000034, OX00000000, who can help me?

Hello

On this path, it is not easy to say what may be the problem. Check Microsoft solutions for this error message on Microsoft Knowledge Base. Q122926

Tags: Toshiba

Similar Questions

HP PRO 3405 series MT * blue screen during installation *.

Hello

I tried to install Windows XP on this PC, but I get the blue screen during the installation. Instead, with windows 8 I can install.

I need drive for controller? (F6 at startup)

Hello:

See if these drivers work.

You will need a USB floppy drive to install on the line of F6. A USB flash drive does not work.

http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 4169006 & prodNameId = 4169007 & swEnvOID = 1093 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-74977-1

Now you have to extract the real drivers, you must copy and paste to your floppy drive.

Download the free 7-zip file and use it to extract the files in the exe file you downloaded above.

http://7-zip.org/download.html

After having extracted the file, you will find the drivers in the folder of the driver.

Open this folder and copy and paste the drivers inside this folder on your floppy drive.

If this does not work, go into the BIOS and change sata from AHCI to IDE emulation and install windows like that.

Then try to manually install the driver sata ahci by a manual update of the drive controller in Device Manager.

If you install, you restart and back emulation sata AHCI in the BIOS, so the hard drive works better it will be in IDE mode.

Please help - Virus? Can not enable automatic updates and blue screens during the virus scan

Hi, I think I might have a virus. Here are the symptoms:
- I can't activate the automatic updates
- MS Security Essentials blue-screens in an analysis complete (I can do a quick scan)
- I was able to run a quick scan of the Scanner for MS without problem.
- When you open Internet Explorer I always get "stopped unexpectedly" and it gives me a choice to go to the previous page or home page
- I have AVG Antivirus but it was blue-screening during a scan, so I uninstalled and installed MS Security Essentials
- I ran a chkdsk /r and no errors not found on my hard drive
I searched the internet and I tried a few suggestions, but so far I have not made progress.

I am running XP SP3 and I don't remember disabling the automatic updates.

I am open to any suggestions, just some guidelines at this stage.

Hello

· What exactly happens when you try to activate the automatic update?

· You receive no error message from error code?

I suggest to reset the Windows Update components and check if the problem persists. Visit the following link and click on Fixit.

How to reset the Windows Update components?

http://support.Microsoft.com/kb/971058

You can also view the article mentioned for more information below:

You can not turn on automatic updates on a Windows XP Service Pack 2 computer

http://support.Microsoft.com/kb/916261

Note: The article also applies to Windows XP service pack 3.

Let us know if it helps.

Installation of Windows XP Pro on a new configuration of the motherboard. Installation locks a blue screen during the installation of devices. Assistance from ms said why, but not healing. Anyone know an answer?

My old motherboard gave the soul, and I have now installed a Gigabyte GA-880GM-UD2H with an AMD Phenom 6 processor and 4 GB of RAM. The 2 HD is a Maxtor Sata 1 300 GB ones. One is divided into 2 equal partitions, the other has a single partition. During installation, it hangs at a blue screen during the "installing devices" and towards the end of the indicator. Removing everything except the essential, makes no difference.
With 0x0000000A IRQL_NOT_LESS_OR_EQUAL error message States. This rising on the MS, it indicates:-stop this message indicates that a kernel-mode process or driver tried to access a memory address in which he was not allowed to access. The most common cause of this error is a bad or corrupted pointer that refers to an incorrect location in the memory. A pointer is a variable used by a program to designate a block of memory. If the variable has an incorrect value, the program tries to access memory that it shouldn't. When this occurs in a user mode application, it generates an access violation. When it occurs in kernel mode, it generates a STOP 0x0000000A messages. If you encounter this error during the upgrade to a newer version of Windows, it could be caused by a device driver, system service, a virus scanner, or backup tool which is not compatible with the new version.

I start with new parts, except the DVD & HDs drive and with a start-up Virgin & installation process. I'm not upgraded to the BONE, that's the one I was using before the reconstruction. The supplier of components, suspected of defective parts and cooperated in the provision of a set of replacement of parts, but there is no change in the problem.

Can someone explain what I can do to start? Thank you!

Hello

See the article below which might help you.

You receive an error message "Stop 0x0000000A" in Windows XP
http://support.Microsoft.com/kb/314063

Blue screen during windows of note

Hello

I tried to run the windows on my laptop, the vaio x Win7 with driver intel GMA500. When I got a blue screen during the process.

The main line was PILOT NOT LESS NOT EQUAL.

I should have the dump file, but I can't locate.

Thanks in advance for any help.

You may need to upgrade your Intel® Graphics Media Accelerator 500 card to something more robust. The updated driver for the device was scheduled for 2010.

Blue screen during the installation of windows

I was formatting my laptop, when the new windows (windows xp) is installed and during his stops starting and give a blue screen with the error, and automatically restart and the same breed bluse screen and restart. I tried to open the safe mode, but its revealing windows is not completely installed please pick up again. I tried four times back again with the same problem. Please help me...

Hi AhmadDimassi,

· What is the error it fails with?

Check to see if the following is useful.

Method 1: Unplug non-essential devices from the computer and restart the computer.

Method 2: Try to select disable automatic system failure reboot since the options of start menu advanced to know the Blue error screen.

a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

b. use the arrows to choose to turn off the automatic restart in the event of system failure in the Advanced Options of Windows Start Menu and press ENTER.

Method 3: Check drive for errors.

Description of the Windows XP Recovery Console for advanced users

Microsoft Windows XP - Chkdsk

Error on blue screen during windows startup - LeAPC_INDEX_MISMATCHErreur

When starting my pc I get a blue error screen saying LeAPC_INDEX_MISMATCHErreur, my pc restarts and I get error when loading of the readers saying: 3rd master ST31000528AS CC38 ultra DMA mode 6 S.M.A.R.T capable but failed the control. 3rd drive hard master S.M.A.R.T command failed, press F1 continue.

I also have this error report for blue screen event.

Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 2057

More information about the problem:
BCCode: 1
BCP1: 85212696
BCP2: 00000000
BCP3: 0000FFFE
BCP4: 00000000
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files helping to describe the problem:
C:\Windows\Minidump\Mini020712-01.dmp
C:\Users\Kiro\AppData\Local\Temp\WER-278446-0.SysData.XML
C:\Users\Kiro\AppData\Local\Temp\WER254B.tmp.version.txt

Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

Is someone can you please tell me what has gone wrong, this has happened more than 3 times now.

Hello

What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-US/Windows-Vista/What-to-do-if-Windows-wont-START-correctly#.

Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
If this thread - top 3 RESPONSES (+ 1 other).

http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.

ZIP or download the content of the C:\Windows\minidump

Use SkyDrive to upload collected files.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

=============================================================

BCCode: 01 0x00000001

The most common cause of this Bug_Check is drivers then use the methods in the next message
updated the BIOS and drivers major. If necessary we can tell you how to run the Verifier however
with Windows Vista, it's a good idea to update all the main drivers as the maturation process is
still in force. (See how to update the drivers and run driver verifier in the next message).

--------------------------------------------------------------------------------------------------------------

Bug Check 0x1: LeAPC_INDEX_MISMATCHErreur

LeAPC_INDEX_MISMATCHErreur bug control has a value of 0x00000001. This indicates that there is an inconsistency in the index of State APC.

Important information if you have received a STOP Code

If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

The following actions could prevent a mistake like this does not happen:

Download and install updates for your computer from Windows Update device drivers.
Scan your computer for computer viruses.
Check your hard drive for errors.

LeAPC_INDEX_MISMATCHErreur settings

The following settings are displayed on the blue screen.

Parameter	Description
1	The address of the system (system call) function or a worker routine.
2	The value of the field ApcStateIndex of the current thread.
3	The value of the field CombinedApcDisable of the current thread. This field consists of two separate 16-bit fields: (thread-> SpecialApcDisable < 16)=""> wire-> KernelApcDisable.)
4	Type (system call 0-, 1 - routine worker) of the call.

Cause

The most common cause of this bug check is when a system file or driver has a sequence are mismatched calls to deactivate and reactivate the APCs. The data key item is theThread-> CombinedApcDisable field. The CombinedApcDisable field is composed of two separate 16-bit fields: SpecialApcDisable and KernelApcDisable. A negative value of field indicates that a driver has disabled APC normal or special (respectively) without them the reactivation. A positive value indicates that a pilot has allowed normal TTB or special too many times.

BCCode: 01 0x00000001<-- read="" this="">
http://www.faultwire.com/solutions-fatal_error/APC-index-mismatch-0x00000001-* 1016.html

====================================================================

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html

-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html

-------------------------------------------------------------------------

Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.

You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Blue screen during the Instalation of finishing

Hey there,

I tried to install Windows 7Pro on an old mobile phone to society with a free HARD drive.

Everything worked up until the computer restarts automatically. During the process of "finish installation", a blue screen appears all the time and the computer restarts. the installation fails every time after that.

The laptop is a Dell Latitude E6520 and the BIOS is updated to the last A19.

hoping to get help,

Thanks for the replies

Its possible your installation media can be damaged or scratched.

If you have any non essential devices connected to the computer, they might interfere with installation.

What kind of way is to install Windows 7 from USB or DVD?

How to: What are my options for Windows 7 reinstall media?

Make sure you scroll down and read the section:

What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

Portege R830 blue screen

Hello

I have problem in my business with one of notebooks and the problem is that when I connect dynadock on my portege R830 my portege screen flashes a few times and then I get a blue screen. The portege and dynadock are new and the portege has a preinstalled Windows 7 pro. I already reinstall the drivers for the display drivers and dynadock and always some problem.
you have an idea?

BR, Toma!

What is a BSOD or just a blue screen?

What color is the background wallpaper on your pc the value? even in blue white?

Blue screen during installation of Windows XP on HP touchsmart 7320

I have a HP touchsmart 7320 with Windows 7 Professional 64-bit pre-installed.

I have to install Windows XP (32 bit) next to Windows 7, so that I can run a costly professional application which meets the incompatibility issues with Windows 7.

Compatibility mode makes no difference. Virtual PC and XP mode are broken during the installation of the application. So its a way for me to have a dual-boot with Windows 7 ande Windows XP machine.

When I am installing Windows XP (all versions-family, professional, 32 or 64-bit with original CD always) gives a blue screen with strange characters and the following STOP message:
```
| STOP 0X0000007E

(0xc0000005, 0xf748e0bf, 0xf78da208, 0xf78d9f08)
PCI.sys - address f748e0bf base at f7487000 datestamp 36d855c
```
I did a new Windows XP installation CD using nLite, "slipstreaming" of Service Pack 2 and AHCI SATA drivers I found here and they are proposed by this guide.

That seems to work for awhile, because the installation process went further. It passes the point where she was already giving the blue screen, but it gives blue screen in a later stage of the installation process and one other STOP message which is now:

Hello:

I have another solution for you.

First, go to your Windows 7 installation and in Device Manager, click on IDE ATA/ATAPI controllers section.

Please confirm that you have the Intel (r) Desktop/Workstation/Server Express Chipset SATA AHCI Controller.

If it's not the ACHI SATA controller you have, thanks for posting what you have.

Now, here is another method to install XP.

Go into your BIOS. Go to the menu of storage options. Change your SATA of ACHI to IDE emulation mode. Save the configuration at this time by pressing the F10 key and save your settings again when you leave.

Now XP must install.

After XP is installed, please share back and I'll give you the instructions step by step to load the post SATA ACHI driver XP installation, so you can change your return to ACHI BIOS setting, so that you can dual boot your machine.

Currently, only XP will start with the value IDE BIOS. With the ACHI BIOS value, only W7 will start. That's why we need to load the drivers for XP achi sata once you have it installed.

I think that we can find all the XP drivers, you need to as well.

Paul

Blue screen error - recovery problem (STOP: 0 x 00008086)

I am working on a Toshiba Satellite laptop and need to recover to original state. I have no recovery disks, however, I followed the Toshiba 'How' instructions (F8, and then select repair your computer), it displays the progress of Windows bar then goes to a black screen for a while and then I get a blue screen error (STOP: 0 x 00008086).

Is there a way to get around this?

N ° if drive HARD recovery cannot start on the regular basis there is no trick to make it work.

To the factory settings, you need Toshiba DVD recovery.

Blue screen during installation of Windows XP from loading

Hello...
I am trying to install windows xp professional...
I'm starting the cd and when windows start to load the tool installation only a blue screen and I have to restart... I tried with another CD and did not work
is that a block is not install an earlier version of windows media center?
(my system is Windows XP media center (from recovery cd))

TKS

Hi Alex

Please write us which model of laptop you have. You've improved some hardware components? Is an external device connected to your unit while you try to install the OS?

Usually each laptop comes with WXP MCE can be preinstalled with Windows XP Home edition. The drivers are the same.

Satellite A100-192: blue screen during the installation of Adobe Premiere

Hi, I need some help ASP...
I bought a satellite A100-192 intel duo 2500 T with 100 GB hard drive and 1024 MB 533 memorry also has a vga ATI 1600 hyoer 512 MB memory,
Try to install the first pro, but I got a bluescreen scrable.
Can this program somehow in this laptop? any help is welcome...
Thank you...

Hi Theodor,

I suggest that you try to reinstall your copy of Adobe Premiere, and if you still get the blue screen when trying to take note of the error message, since this will give you some clues as to the nature of the problem.

If the blue screen appears too fast and forces the phone to reboot then just right click on the 'My computer' icon and select 'Properties', then click on the "Advanced" tab and in the "Startup & recovery" section click the "Settings" button In the next under the title of "System failure" screen make sure that the option restart automatically is not checked.

Kind regards

Re: Satellite L450D - blue screen during installation of Windows XP

Hi, laptop just out of warranty and the HARD drive was crushed, no return allowed ups recovery so don't not on the new HARD drive installation.

I installed the new HARD drive and began to install XP. Implementation of process gets to the point where windows will write the files to the HARD drive and the blue screen appears! What is a SATA driver problem?

Have tried with a copy of XP, I with the SATA drivers on it but don't know if it's a problem of controller or a specific driver from Toshiba.

Any help would be appreciated... TIA

Hey,.

As you can read in 100 other discussions here in the forum, the problem is the SATA driver you need.
As far as I know Satellite L450D a AMD chipset, so you can find the SATA driver in the display driver package that you can download from the official website of Toshiba.

In addition, I would recommend reading the other discussions here in the forum. You can also read the son of other laptop models, it s always

PCI.sys blue screen during the installation/repair Windows XP Pro

My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

Portege M100: Blue screen during recovery

Similar Questions

Maybe you are looking for