Portege M200 BIOS update running Windows 7?

Similar Questions

• Portege M200 BIOS update

  Hello
  I have a portege m200 and because he doesn't any device (floppy drive, dvd) top, I want to be able to boot from an sd card. For that I need the most recent BIOS version v1.70win, but to intall, it requires the common Module. I have instaled (there was no error, at least), but when I try to do the update, a message "lack the common module". So I'm a bit confused. I guess the best, think to do is erase any previous version of the common module and reintall it, but I have no ideea how I had to do.
  can someone give me clues, or maybe I'm on the wrong track.
  Thank you
  Daniel

  Hello Daniel

  AFAIK it of not necessary to install a common Modules if you want to update the BIOS. You can normally find the common Modules to add and remove programs. If you need a whole instruction how to do a BIOS update, you can find it on the Toshiba site.

  http://EU.computers.Toshiba-Europe.com

  Please go to Support & downloads and Knowledge Base. There, you can search for the BIOS update.

  Good bye

• Z500 BIOS update on Windows 8.1

  Hello

  I have a Lenovo Z500 laptop and I would like to know if it is safe to run 1.21 BIOS update for Windows 8 on Windows 8.1 64bits? I have a problem with the Fn keys and in my current (1.10) BIOS, there is no option for it.

  Sorry for my English and thank you for your response.

  mlukas wrote:

  Hello

  I have a Lenovo Z500 laptop and I would like to know if it is safe to run 1.21 BIOS update for Windows 8 on Windows 8.1 64bits? I have a problem with the Fn keys and in my current (1.10) BIOS, there is no option for it.

  Sorry for my English and thank you for your response.

  The bios is not dependent on OS. I think that the flash program used to update the bios work correctly under windows 8.1. Before you do the update try to make a backup of your current bios so that you can always come back if you wish. See the image below on how to do the backup and update the bios.

  

• Re: Tecra M9 bios update without windows

  I have a Tecra M9 runs only [Opensolaris 2009.06 | http://opensolaris.org/os/downloads/] on this subject.
  Is it possible to do a Bios Update (acutally I have 1.50)

  Is there an ISO image or back - tools so I can create my own ISO image...

  Thank you
  GerryH

  Hello

  I doubt you'd be able to update the BIOS on the Opensolaris OS.

  The Toshiba page provides only focused on the victory of the BIOS, which means that you need to install windows to update the BIOS.

  The traditional BIOS version allowing you to update the BIOS by using the USB disk is not available for download.

  I think that only FSA (authorized service providers) availability to perform a BIOS update using the diskette.

• Portege R700 - BIOS-update 2.20 - WIN does not work

  I have a Portege R700-172-PT311E-03201KGR
  It's a WIN 7 64 bit Machine.

  Current BIOS 1.70
  EC-current Version: 1.40

  For this machine, an update of the BIOS and IT's there.
  So I downloaded the "BIOS220_EC160.exe" update and tried to treat.

  The first message during the update process is: "it is necessary to update the BIOS and THIS.
  When I continue with "Run the update", I get the error message:
  "Error: preparation of updated failed.
  Given the image file is not compatible with this cimputer.

  There is no change in the material of the machine. The only problem I see is that we use McAfee Endpoint Encryption (V6.0.2.6) that could have some influence on the update of the BIOS.

  But I'm not sure.
  Does anyone have an ideas?

  Hello

  BIOS update is important to you?
  Do you have problems with the laptop?

  I have portable three-year-old BIOS was did not updated

  However, AFAIK the VAP (value added package) must be to get the updated BIOS updated. Also the firewalls and other security and antivirus preinstalled on the system software must be disabled before attempting to update the BIOS.

• HP Pavilion A6750Y Bios Update for Windows 7?

  Hello, I bought a HP Pavilion A6750Y years that I have been very satisfied.  I have of course updated from Vista to Windows 7, added a video card and I'd really like to upgrade my cpu.  So far, in the Support & drivers for my computer, it lists still my motherboard as being able to run up to a processor AMD Phenom 9950 x 4. I noticed however if I list my OS as Vista 64-bit, then it does in fact appear a BIOS update that would allow the MOBO to exploit some AM3 cpu. It would still work for my computer running Windows 7, or y at - it an update of the BIOS in preparation for Windows 7, otherwise I would really like to make the request. I want to spend my processor to a Phenom 2 x 4 and need my MOBO to support AM3 processors. Thank you in advance.

  Hello:

  I wouldn't update the BIOS by using Windows 7. There is more than 95% of probability you will make the PC unusable.

  HP will release no updates to the BIOS of windows 7 for your PC.

  If you want to update the BIOS, your only alternative is to install Vista, updated the BIOS and then reinstall W7.

  Paul

• Equium A110 - 276 BIOS update for Windows 7 32 bit

  "Hello everyone, I'd like to update the BIOS on my satellite A110-276 and the two choices are 'OS Independent' and ' Windows Vista 32 bit. I have Windows 7 32 bit on this laptop. If I choose "OS Independent" it tells me ' Bios is NOT compatible for portable computers with Windows Vista! "and if I choose" Windows Vista 32 bit ' he reads "Bios is only compatible for portable computers with Windows Vista!

  Exclamation points are Toshiba, not me ;)

  So I am stuffed and I need to stay with my current BIOS, or can, I use Windows Vista BIOS update?

  Thanks to anyone who can help!

  Hello

  First question; Why do you update the BIOS?
  Do you want to update only to have a newer version?
  If your Windows 7 is working well, then a BIOS update is not necessary.

  Otherwise, install Vista OS to Toshiba Recovery (if available) disk, the BIOS update and then change to Win 7 ;)

• Portege R700 Bios update problem - this computer is not supported

  I tried the update for Portégé R700 Bios with Toshiba Service Station and by downloading the exe of the bios.
  Both say that "this computer is not supported", but the downloaded bios file is correct.

  What should do?

  Hello

  Go to the page European driver Toshiba and download the BIOS package manually.
  Unzip the BIOS and try to run the exe file once more

  But why you need BIOS update? Have you noticed a few problems with the laptop?
  BIOS update is not required if you don t have problems.

• Pavilion Media Center M8400f Bios Update for Windows 7

  HP Pavilion Media Center m8400f. The Vista operating system has been replaced by Windows 7 (64 bit) a number of years.

  I've updated one of my hard drives with a SanDisk SSD (it is now my main drive with the operating system and all my files on board).

  The bios on the PC has never been updated.

  The SanDisk SSD dashboard software will not recognize the SanDisk SSD as the system has designated the SSD as a SCSI device. I need to access the bios for this change to AHCI. The current bios does not support this.

  The PC has a card mother MCP61PM-HM. There is no update for Windows 7 BIOS for that motherboard I know (updates Vista only).

  　

  SanDisk gave me a link to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-82094-1&cc=us&dlc=en&lc=en&... that shows a card mother M2P61PM-HM for m8400f desktop PC. This Bios download supports Windows 7 (64 bit).

  Can update the Bios to download safely a card mother M2P61PM-HM for card mother MCP61PM-HM I currently have?

  Hello

  The HP BIOS update link provided SanDisk is an update of the BIOS of your PC. It is listed under Win Vista 64 bit driver downloads here.

  If you look at the site to download the drivers for your PC you'll only see driver support for Win Vista but on 2010-04-08, Version 5.29, 1.47 M BIOS updatedshows support for Win 7.

  But the problem is this: the BIOS updates must be performed using the PC operating system comes with; in your case, Win Vista. Extreme care must be exercised when updating the BIOS under normal circumstances. I would not classify your situation as usual.

  I saw others download an update of the BIOS for their PC and try to install an operating system upgraded with disastrous effects. The PC was bricked.

  Be prepared for the worst case if you try to install the update to the BIOS.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  Office 810-150se (Win 8.1)
  17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
  H8 1380t CTO Office (Win 7)
  560z Desktop (Win 7)
  
  Other PC:
  Laptop Dell Inspiron (Win XP upgraded to Windows 7)
  Custom build: (Win XP upgraded to Windows 7)

• Portege R500 BIOS update 1.60 - WIN

  Hello

  I was watching the update of the BIOS available on download since 25-03-08 pages 1, 60 - WIN.

  Anyone know what is the update?
  The explanation on the download page says simply: + "This Bios update adds functionality to your system." +

  Thanks in advance.

  If this isn't much of a change, that you need not update BIOS. Continue to use your laptop with pre-installed version. ;)

• Re: Portege R500 - Bios Update Setup hangs

  I have problems with my R500, so I would update the BIOS of thought.

  I went to download bios - 200803250781.zip

  It contains the P0058v160.exe file

  From that process leads to:

  "install2 has encountered a problem and needs to close."

  Should these BIOS be installed gradually? My r500 is early and running v1.00.

  Sorry

  Hello

  If you want to update the BIOS, then you need to download the BIOS package and must first uncompress it.
  Then run the exe file in the folder.

  I don't know why the error message, but please make sure that the common Modules are installed on your system of m.

  If the error will still persists then this might be a problem with the installed Windows operating system, and not with the BIOS software.

• ProBook 4420 s - BIOS update failure - Windows 8.1

  Had a bad HDD then I've upgraded to a new SSD with Windows 8.1 after doing so. I decided to update the BIOS.  I've updated the BIOS through Windows and restart that the laptop would not start.  All I saw was a white wireless LED and LED power.

  I have tried the 'Windows key' + 'B' of the BIOS recovery method, but when I do that. I'm white power LED, amber and continuous wireless LED blinking LED white "Caps Lock".

  I used the steps here: http://forums.mydigitallife.info/threads/870-Bios-Recovery-Procedures/page79?p=398310&viewfull=1#pos... and the laptop go through the steps, but I am still living with a white screen.

  Any help would be appreciated!

  ProBook 4420 s

  Product #: WH291UT #ABA

  I was able to bring back the dead laptop computer by following the instructions in the link I posted and the version of the BIOS F.20.

  After the upgrade laptop computer and running; I've updated the BIOS F.21 using a USB key and it worked without a hitch!

• BIOS updated on Windows 7, now it is more 'authentic '.

  I've recently updated the BIOS on my motherboard because I had pretty severe physical problems. These problems have disappeared, but now as of July 8, Windows 7 cannot determine whether it is genuine or not. I have no doubt that it is authentic, because this particular PC also comes with Windows 8 Pro but pre-installed with Windows 7 Pro. However, I've looked everywhere and I don't have COA for Windows 7 Pro either. I guess that's because it's OEM SLP. There is however a real sticker to Windows 8 Pro on pc it's led me to believe that Windows 7 Pro is not wrong either. Is it possible to upgrade my BIOS was what triggered this sudden "non-genuine" question? Is it possible that this was SLIC activated with what was the old BIOS version or I leave completely here?

  Honestly, I don't know where to go with that because my computer tech support was not helpful at all and I prefer not wipe my computer and install Windows 8 only for her to have the same issues, if it is due to the upgrade of the BIOS.

  Here are the diagnostic report I received help from the tool that Microsoft provided. Any ideas would be much appreciated.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - BYTP3 - JWB98-9J64J
  The Windows Product Key hash: w7ErUSvGp2X5cHY89l2sma7bo6w =
  Windows product ID: 00371-OEM-8992671-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {9C4B23EA-A103-4171-A2B6-AA2C35AD085D} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150525 - 0603
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {9C4B23EA-A103-4171-A2B6-AA2C35AD085D}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-9J64J00371-OEM-8992671-002112S-1-5-21-2939612654-3489715370-4180785974to be filled by O.E.M. power O.E.M. American Megatrends Inc.. P2.20 20150512000000.000000 + 000E4FE3007018400F404090409Time(GMT-05:00) Standard is03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700211-02-1033-7601.0000-0282015
  Installation ID: 007584542450003452487101925464628774508455177093713261
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 9J64J
  License status: Notification
  Reason for the notification: 0xC004F057.
  Remaining Windows rearm count: 2
  Trust time: 09/07/2015-03:31:42

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004B100
  Beyond: 0 x 0000000000000000
  Event timestamp: 7:9:2015 01:21
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID hash: MAAAAAEAAQABAAEAAQADAAAAAQABAAEAHKImUZ73BkTO0o7jsvsKQ7RZOUxUEsj2

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  ALASKA APIC HAS M I
  FACP ALASKA A M I
  HPET ALASKA A M I
  ALASKA MCFG A M I
  FPDT ALASKA A M I
  MSDM ALASKA A M I
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  AAFT ALASKA OEMAAFT
  UEFI ALASKA A M I
  SSDT PmRef Cpu0Ist

  Hi Trisha,

  Please provide detailed information about your question.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. Are you a specific error code with the message "this computer is not running genuine windows?
  2. What is the activation state in the System Properties window? Is he showing active or non-active?

  Normally after upgrading BIOS you should not get this serious issue on your computer. However, I would like to confirm with you that is your computer showing Windows activated in the System Properties window or not. For more information, you can consult the steps and the screenshot below.

  • Click Start.
  • Right-click on computer.
  • Select properties and below page will open.
  • Check the activation status.

  

  If you encounter a problem to activate Windows, then please refer to the suggestion and steps described in the following article and see if it helps.

  Activate Windows on this computer

  Keep us updated on the issue and we will be happy to help you further.

  Kind regards

• Portege Z830 - BIOS update fails

  Just got my Portege Z830 am folloing the Toshiba update and recommendations. The update of the Bios v1.7 fails with a message 'unsupported computer "...

  Any ideas? THX, urhs

  I can't say anything on this issue but if your laptop works well don t change anything.
  Out of curiosity but don't use you original pre-installed BONES that you got with your Portege?

• Speakers have stopped working after the flash BIOS updated for Windows 8

  I had recently changed the OS of my HP Pavilion dm4t-2000 for Windows 8. After that an update of the BIOS flash me suggested by HP Support Assistant, speakers have stopped working. I tried to reinstall the Audio Codec, but it does not work. Could someone help me please?

  jaikvk,

  Go into Device Manager and uninstall the sound and restart the computer. This will reinstall the driver once more.

  Also, it could be a bad installation of the BIOS; You can go to HP.com and re download the update of the BIOS.

  Let me know if it helps.