Portege M200 - connection loose in the power cord

Similar Questions

• After resetting the iPad to default it show that the power cord is trying to connect to iTunes

  I got an iPad 16 GB factory reset default after a while display only the power cord going to iTunes, need help to get this operational back, it worked Ok before resetting all we have tried to make clear the former owner information

  The iTunes icon and cable image means he went into recovery mode, you will need to connect it to iTunes to your computer to reset the iPad, and you can then restore/resync your content.

  If the previous owner had not disconnected from the settings > iCloud on it and find my iPad has been activated, you will need to communicate with him or her: disable find them my iPhone Activation Lock - Apple Support

• Satellite Pro U400 freezes sometimes when the power cord is plugged

  Hello! I know that this problem has been addressed here and there, but I'd like to open a new thread about it. Here's the scenario.

  I recently bought a new Toshiba Satellite Pro U400-247 (PSU45E) with two batteries: (a) the original, (b) in addition purchased authentic of Toshiba PA3636U-1BRL, 7200 mAh. The laptop has the latest BIOS (4.80) and the latest drivers downloaded from Toshiba and installed (ConfigFree is not installed). I use XP Pro SP3 (own installation by myself). Everything works fine, except for one thing:

  Sometimes (but), when the laptop is running on battery power and I plug in the power cord, everything hangs and I have to restart. A few observations:

  It tends to occur more frequently when the low battery alarm has rung;
  (b) it seems to happen more frequently with the 7200 mAh battery and less frequently with the original battery.
  (c) it seems to happen most often when a USB device (mouse, for example) has been linked to the laptop, but it is not a rule;
  (d) it seems to happen less often when I move the mouse USB at the time wherever I am connect the power cord.
  (e) I've experimented a lot with Toshiba PowerSaver settings (for example to change the levels of CPU for my profile) but nothing I changed seems to change the situation.
  (f) I tried different suggestions I found on various forums, but nothing works (for example the BIOS settings);
  (g) otherwise, I can say that I have not really seen a smoother computer, everything works really fine, no other problem :)

  Everything that makes me think it must be some sort of bug in the drivers of motherboard driver PowerSaver or other drivers interact with battery, CPU or possibly USB. Y at - it an explanation to this problem and can it be rectified in some way (for example, by providing a driver update)?

  Hello

  First of all, I never heard a driver from the motherboard.
  There is a drive chipset or a graphics card driver. There is no such thing as a driver of the motherboard!

  Look, man. laptop should work fine even the AC adapter is connected or not connected
  If the laptop freezes while there might be a software problem, but in my opinion it could be hardware problem
  You must reinstall the operating system if the laptop would freeze always the issue might be related to hardware

  First of all the memory modules and AC adapter must be verified.
  If the problem persists even using new modules and AC adapter, motherboard may be affected.

• HP Deskjet 6988 seems dead. Mid-page printing order, all the lights are off except the power cord light

  He won't return.  Push buttons does not help, or not pulling on the power cord to the printer, standby, restart the router & printers.  I have also connected by ethernet cable but I do not think that the connection is the problem because the printer is connected to power but will not produce lights or sounds.  It does not appear on the list of printers, and utility HP cannot detect it.   Windows Vista 32-bit, in my opinion, bought in 2007.  Is it gone forever?

  Hi Poboy,

  If the adapter has a green light to this topic, and you tried to plug it into different outlets, this would indicate that the printer may be dead. If you have tried these steps consult the following site

  http://www.HP.com/United-States/tradein/home_flash.html

• SCREEN FLICKERS WHEN I PLUG THE POWER CORD A/C

  Can someone help me with this problem. My screen flickers when connected im playing games with my a/c power cord. Howerver when I remove the power cord, it works fine on battery. Also my battery almost won't charge at all with my laptop running, but when I put into hibernation or to stop it charges more quickly. Would appreciate any help as soon as POSSIBLE. Its a Dell Latitude E6400, windows 7

  Diagnosis

  The video "Refresh" is switching between 60 (on food) and 50 Hz (on battery), and the screen goes momentarily empty.

  Solution

  So what about current alternative, office > right click > properties > settings > advanced > monitor. Here, under the display settings, set the refresh rate of the screen at 50 Hertz. After you apply these settings, the flashing problem gets fixed.

• A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

  A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

  Yes.

  http://www.Apple.com/Mac-mini/specs/

  the voltage may vary from 100-240 V AC.

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Pavilion m6 - stop suddenly and mystery of the power cord

  Hi people,

  I got a very strange problem with my laptop from m6-1035dx Pavilion the past two days. This is a reconditioned unit and have had some problems with it in the past (both hardware and software-related) that I managed to fix me, but this one left me speechless.

  It started yesterday when the computer was placed on a bed (with a CoolerMaster pad below, which I almost never separate the portable device) and immediately turn off the power. In the past, I had problems with heat stops, that I solved with a bit of air in canned and CoolerMaster pad said, so I don't think much. But the same thing happened today, and I noticed that when it has restarted, it does not recognize the fact that the computer is plugged in. Unplugged the cord/AC converter to three points (computer, converter, wall) and tried again, still nothing. Tried another outlet, blew the vents, power off and removed/re-inserted battery, still no recognition of the power. I reinstalled HP CoolSense (which I had removed several months before) and hope that would take care of things. Meanwhile, I shut the computer off again, and the LED power indicator lit on its own.

  Several hours later, the computer was reactivated and placed on a flat surface. Someone tripping over the cord, and the computer turns off again. The LED power indicator is out once more, so I unplugged the power cord and left for a few minutes. Blocked again, and the power was back.

  I am reasonably confident that I should replace the power cord at this point, but I want expert advice before I commit the money that him. It may also be interesting to note that while the power cord did not work, the battery (92%) had about two hours and six minutes of use remaining, which is well below the advertised battery capacity (to be noted that only Chrome was running at the time) and what I saw of the battery in the past. I think that the cable or converter can be shorted, then is it safe to use the computer at all? Wouldn't be a good idea to replace the battery as well? I will provide any other details if necessary and thank you in advance for any help or advice.

  Hi maestro35,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having feeding problems with your Pavilion m6. I'll be happy to help you with this. If it is running with the battery, I wouldn't worry about the replacement of the battery quite yet. As for the fact that it gives you less time announced that it could be the mere fact that the battery life decreases over time. You don't mention your operating system, this is why I have included two links below which will allow you to test and calibrate the battery. This will confirm that the battery is working properly.

  Test and calibrate the battery (Windows 7)

  Test and calibrate the battery (Windows 8)

  I agree that it appears as if the power cord is the question. If you have a similar cord, you might give it a try to see, but there's a chance it might be the prospects of power supply for laptop. If something is shorted, then you shouldn't really use the laptop but without testing actually physically we will not be able to determine if something is put in short circuit.

  Thank you

• blue screen after pulling on the power cord

  I accidentally pulled the power cord while the computer was on, now I get a blue screen that says to run checkdisk, but I can't go beyong trhat screen.

  my suggestion is to start your computer with a xp cd and run a chkdsk command & via the recovery console fixboot.

  There is more info here but focus on option 2: http://support.microsoft.com/kb/314058

  Sometimes the fixmbr command must also be executed as well, if the computer gives you an error message later on "master boot record".

  DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >

• Pavilion Slimline lock up in sleep mode-fan works high not lights up unless I pull the power cord 1

  New HP Pavilion Slimline desktop 400-314 - mode 'sleep' sometimes cause to lock the computer, the power light is on, the fan runs at the top.  Only way to unlock the computer is to hold the power button for 5 seconds.  I wait 15-20 seconds, then press the power button to wake it up.  Immediately the computer restarts to the top with solid power light and the fan turns at the top.  The only way to break this vicious circle must first pull the power cord to the rear, wait 30 seconds and plug it in again.  This time, when I turn on the computer it goes off just fine.

  Is this a BIOS problem?  Please help as I don't have that much hair left.

  * Solved * Finally!  After 8 grueling days of pain staking agony and incessant attempts to fix this thing, I finally solved my problem.  I spent countless hours on the phone with HP support and nothing resolved.  That is: the problem with this computer locking up and sending the fan at high spin was due only with external speakers. When you reset the power system disconnected to boot the system, he would normally go for at least half a day before locking up.  I discovered that the speakers are older than 15 years. It's funny, these speakers worked fine on a desktop HP 2004 previous Pavilion running on Windows XP.  Now, it's static build-up that caused my death or something else?  As far as I know, it's that I'm a happy camper using headphones with a new system of HP that finally works.  Thank you to everyone who made suggestions.

• Presario CQ20-320TU: my notebook (presario CQ20) directly turn on when I plug in the power cord without battery

  My laptop (presario CQ20-320TU) turn directly every time I plug the power cord without battery. What is the solution?

  Hi there @emonsonjaya,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that your notebook is turn on/off automatically when it is plugged. I'm happy to help you.

  I would recommend that you look at your BIOS, especially in power options and check if your BIOS has a setting option on automatically. If yes it change at your convenience.  Another option would be to update your BIOS and see if that solves it.

  Here is the page of support for your model and, if necessary, give it a try, it will automatically download the file if you click on the link. You then need to run the executable file of your current download folder.

  HPQFlash for HP Notebook System BIOS (68PHU) - Microsoft Windows-Based

  If you are having problems with an update of the BIOS, you can always restore it, using the following:

  HP Notebook PC - restore BIOS

  I hope this helps.

• HP Pavillion DV5020 that blanks out when the power cord is not plugged in.

  I have a HP Pavillion DV5020 that white outside when the power cord is not plugged in.  Then, when it is in it's very well and when he's not even starts not with the screen committed.  It is NOT the function sreensaver.  Can I plug an external monitor and see what happens, but the maternal lines white leaves display off whenever it is on battery power.

  Anyone seen this before?

  g

  I would recommend to go ahead and reset the computer of hard edge. This is one of the best steps for these types of troubleshooting questions. Here is a link that will guide you through the steps on how to perform a hard reset: http://goo.gl/6mk6K

  I would like to know how it works and post back with all new details.

  Thank you!
  Sean

• is it safe to run my compaq presario cq62 without the battery and the power cord attached?

  My laptop told me that my battery should replace... I have to keep my power cord in now all the time coz my battery poer only changed as 5 minutes... is it safe out of my battery and run the laptop the power cord?

  Hello:

  Yes, you can do it.

  Is it a matter of having a lighter weight?

  You can also run the power cord with the battery installed.

  Sometimes the battery is so bad that you have to remove and the laptop will not work with the battery removed and plugged power cord.

• Can make a record hard damaged by mistake of connection of the power cord on the jumper pin?

  Hello

  I tried to upgrade my HD, but I connected by mistake the SATA power cable to the axis of the lower rider after mistakenly removing the jumper shunt

  May I know if this could have damaged by HD?

  I tried to connect in the way justifiable but the system might not always detect the drive.

  What are the possible causes and how to overcome it?

  Thank you

  Low

  A Sata hard drive shouldn't have riders, so make sure you have the jumper in the right position and the cable correctly connected IDE.

• Reference Dell 2400 will start when the power cord connected to the mains, or after restoring power. Is the result of a setting on the computer?

  The computer is turned off.  If the electricity is off, the computer will automatically start once power is restored.

  I guess it's a desktop pc that is a few years old and yes some early atx power supplies will do it, creepy when there was an interruption of the power supply when you are out and go home to find the pc on.