Portege M200 recovery process does not work

Similar Questions

• Portege M200: serial port does not work with port replicator

  Hello
  I have a Tablet m200 and the top mentioned dock/replication PA3314-1PRP port.
  As the M200 has no serial port (rs232), I want to use the one on the docking station, but it is not recognized as a device on my tablet.

  Thew network connections and usb ports all work fine and the lpt port is shown in Device Manager. I have restored the Tablet and it still does not recognize the serial port.
  How can I get this port recognized so that I can use it.

  Thank you very much
  Lee

  Hello Lee

  I just, I can confirm that when you use the Replicator port advanced III with Portege M200 several ports do not work. Problem is that Portege M200 does not support these interfaces.

  This is a technical limitation and the port of mouse PS/2 port keyboard PS/2, serial port, I.Link (Firewire) port and DVI port will not be supported when Portege M200 is anchored on the Advanced Port Replicator III. :(

• Portege M200: Rotation utility does not work with the new driver

  Hello

  I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.

  When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.

  Anyone any ideas?

  Hello

  You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site

• Portege M200 - the keyboard does not work and I can't boot from CD/DVD

  Hello

  I recently tried to install VM Player on my Toshiba M200. When I restarted my computer, I found that my network connections did not work. I tried to uninstall the reader of the VM, but it failed to halfway. As the program has created a number of virtual network connections which I couldn't remove, I went into the registry and remove the 20 entries or while I thought when linked.

  I rebooted and found my keyboard HID devices and Wireless does not. So I started using the ketyboard softward to try to resolve the problem. I was able to reboot and login using the software keyboard until I did a restore to the last parameter of normal startup. How, rather than get my login window, I get a message asking me to press Ctrl-Alt-Delete. When I do using the software keyboard I get another window saying due to security, I have to press key instead of Ctrl-Alt-Delete Windows security. When I press the button on the key of Windows security on the lower side right of the screen, nothing happens.

  What I can do. I have also tried to attach a USB CD drive (Philips) but can't get the laptop to boot from it. I get an error message (so I had to research readers of CD boot) saying the laptop can not find the drive. The CD comes on during startup, but only for a second.

  I'm desperate so please let me know what options I have or what I can do about it. The physical keyboard works during startup until the first Windows startup screen appears. No NumLock or such work at the time when I get to the login screen.

  Thanks in advance for one advise you can provide.

  Hello

  A long history on your question... I think the reason for this is why you deleted some registry keys. If you delete something in the registry of Windows, you really know what you're doing. You may damage the entire Windows system!
  So I think that's the reason why the keyboard doesn t more.

  In the manual, I founded the CD-ROM boot option is available with the optical disk option.
  So for me it sounds like that your CD USB drive is not compatible with the laptop

• For 1000-zx satellite recovery disk does not work

  XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

  Hello

  Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
  However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
  In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

  Good bye

• My recovery CD does not work and will not install my genuine copy of Windows XP.

  XP Home Edition.

  I bought a computer acer laptop, which came with a pre loaded windows XP Home Edition. As I had to format the laptop for some reason, I used a pirated version of XP.  Now, I want to install the original version. I have the product key. My recovery CD does not work, because I had used the pirated version.  Pls help...

  You need to start using the CD - no existing OS - and install it to clean.

  It will wipe your drive first, back up your data on an external support.

• Data Recovery Advisor does not work

  In our environment of RAC DB 12 c Data Recovery Advisor does not work? Why?

  The Data Recovery Advisor is only supported by ORACLE DB Single Instance!

  https://docs.Oracle.com/CD/E60665_01/db121/BRADV/rcmrepai.htm#BRADV246

• RFS process does not work

  I have a primary logical and 10203 10204 standby database. The rfs process does not work on the day before due to which the archive are not shipping.
  
  Please notify
  
  Thank you
  Ajay Kumar
  
  Published by: user513478 on March 6, 2010 03:23

  Check the log of alerts for primary implantation and ensures... This can lead to some useful divativi.
  also please post the version and os details.

  Anil Malkai

• I'm trying to recover my Windows Vista, but one of my #2 recovery disk does not work... What can I do?

  I copied 2 cd on my hard drive disk recovery & disk #2 does not work. I tried to get through the system recovery to restore the computer to its original factory shipped State. It calls into original form and content reinstalles. Then it restarts to finish and said: ERROR LOADING C:\PROGRAM FILES\WINDOWS MEDIA PLAYER\wmssetup.dll THE SPECIFIC MODULE COULD NOT BE FOUND!

  THEN IT CONTINUES TO THE NEXT WINDOW WHICH SE BED:
  INSTALL WINDOWS
  WINDOWS COULD NOT PARSE OR PROCESS UNATTEND ANSWER FILE FOR [SPECIALIZE]. THE SPECIFIED IN THE ELEMENT OF THE RESPONSE [MICROSOFT-WINDOWS-DEPLOYMENT] FILE.

  AFTER THIS WINDOW IT SAYS PRESS OK BUT MY LAPTOP DOES ME NOT LEAVE THE REST OF THE ARROW IN THE MIDDLE OF THE WINDOW & WON'T LET ME CLICK ON IT! WHAT CAN I DO TO GET THROUGH THIS PROCESS!
  YOUR HELP WOULD BE GREATLY APPECIATED! THXS
                                                    

  Contact the computer manfacturer, who provided the original discs.

• Satellite A100: Recovery DVD does not work

  I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

  I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

  However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

  What is the problem with that? How can I really use this recovery DVD?
  Someone help me please.

  Thank you.

  Hello

  The recovery procedure is not difficult.
  Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

  Your problem is very strange. You have created all the partitions on the HARD drive?
  I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

  Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)

• Win 7 64 bit HP recovery CD does not work

  Hi all

  I ordered the HP Windows 7 64 bit recovery CD and it doesn't work.

  When it separates partitions, and it displays its progress as usual for example

  1/7 full
  2/7 full
  3/7 full (files copied etc..)

  but around 3/7 or 4/7, the sound of the CD in road changes and it seems that it restarts continually.

  I am confident that the problem is related to this CD because the other disks work properly and the 32-bit recovery CD, I had with laptop computer reinstalled Windows very well.

  I wonder what could happen? I have contacted the company on this topic and am waiting to hear. I see no damage to the evidence on the record, and I take great care in general. All I know is it does not work. Any ideas?

  Thank you

  > I ordered the HP Windows 7 64 bit recovery CD and it doesn't work.
  What do you want with a HP recovery disk?
  If you have a Toshiba laptop, then you must use a recovery disk Toshiba

• Satellite L350-170 - recovery disk does not work

  Hello

  I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work.

  I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar appears at the bottom of the screen, after that, the screen turns white and all I'm left with is a pointer of the mouse and a black screen.

  Thank you
  Jackie

  Hello

  Have you tested if the laptop would start using another bootable Linux Live CD, WinPE or Win XP disc?
  Please check that would help determine if the problem is related to the computer laptop or recovery disk.

  Please also check if the HARD drive is ok. For this test, you can use a test called Drive Fitness Test free HARD drive tool. Google for it.

  However, it could also be a defective recovery disc and in this case, you should get in touch with the guys where you ordered this drive may be you need a replacement.

• Satellite A30 - 203 - recovery disk does not work

  Hi all

  I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

  Thank you

  Hi dimation,

  It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

  In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

• Portege Z930 - display driver does not work properly

  Hello

  We have a Portege Z930 with Windows 7 64 bit in use where the Intel display driver seem to work fine.

  First problem is the slow presentation on screen - if we open a (simple JPG) photo and move the window, the frame window break during the move and showed very weird.

  Then, we have installed a U3.0 dynadock docking for the use of two external displays more. This method works even worse. To the docking station, we used the driver from the CD supplied in the delivery and connect to a USB 3.0 connector.

  On starting switching on 2 screens instead of internally for computer laptop screen does not work - and we use workaround of using an extended desktop on all 3 displays (2 external and internal display for laptop as the third).

  In Internet Explorer, it should turn off GPU Rendering and use Software Rendering rather because otherwise, we observed critical irregularities on the external screens (with 2 Windows Open the screen froze or could not display Windows Mobile). However the display isn't satisfactioning.

  We have tried 3 different versions of the recommended Driver Intel which is also offered by Toshiba to download; We loaded it is there and also 2 versions more (a more recent, one older) Intel directly.

  So, how can we get this working properly?

  Thanks in advance and best regards,
  N. Cochems

  More importantly. Make sure you have Service Pack 1 installed Win7. New laptops have problems running in win7 RTM (without service pack).

  It seems that Windows uses the standard VGA driver instead of the Intel driver. Uninstall all display drivers from Control Panel-> programs and features and then go to the Toshiba website and install the utility Intel Chipset then the Intel display driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new software v7.xx DisplayLink driver fixes several issues found in v6.xx drivers.

  Verify that the Intel drivers are installed properly in Device Manager.

• Portege 3500: FN key does not work

  the FN key is not working and when you start get the recovery of the thotkey failed

  What function of the FN key doesn't work?
  If the switch show FN + F5 n t work buttons you need to install utility for display devices access keys. If the wireless shortcut key does not work, you need to install Wireless hotkey.
  As you can see, different applications and drivers are required to use different Fn keys.

  But common modules must be installed always, because this driver is important for every application from Toshiba. Also, be sure to reinstall the utilities.
  Visit the Toshiba for the necessary drivers.