Portege M300 - how to install driver LAN

Similar Questions

• Where & how to install driver LAN for Satellite U200?

  Hello

  I bought new Toshiba satellite U200. I don't use "product recovery cd" because there were PL version of windows. I have installed IN windows XP Home Edition and I downloaded the drivers from the Toshiba site.

  Everything works without Ethernet LAN. There is information in the system that the Ethernet is not installed. WiFi Works but the cable does not work. Please help me to find the driver.
  I bought this laptop yesterday in Poland. If you need more information please ask.

  René

  The Image of Toshiba preinstalled contains an option to create a CD of Driver & own tools.
  You must first create this CD. So if you want you can install the operating system new, fresh clean and after this procedure, you can use the drivers from Toshiba on this CD.

  Please note:
  On the Toshiba driver page, you will find an installation instructions document.
  Please follow this order of installation!

• Portege 7020ct - how to install driver for pcmcia cd rom

  I have this portege, but the CD is not installed (cdrw). I don't have the software - and finds him outside the broken Web links. When I plug it in, it says that I need the freecom pcmcia ide driver. I need the cd-rom to install things like the internet - but my other laptop is not a floppy drive and I can not install my USB on the portege so I can not port on any drivers/software in any case.

  What should I do? I am at a loss

  Hello

  Have you checked the page of the Toshiba driver?
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  check under: Options - cd/cd-r/dvd drives - freecom, freecom cd - rw PCMCIA cdrom

• How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  XP drivers for XP, NOT of Windows 7...

  Go to control panel > devices and printers > click on "add a printer".

  The computer will search your but probably not find it, then click on the box "" does not appear the printer that I want to ".

  A list is displayed, but the printer is not in it, then click Windows Update. After a few minutes, a revised list will appear and if you click on the cannon, the BJC 1000 is in the list.

  Click on 'NEXT' and follow the installation instructions...

• How to install driver wireless?

  I have a laptop M40X, I want to know how to install a wireless drive for my computer wlesslan-sm40x-xp-9019 Win ace
  Thank you very much

  Hello Frank

  You can find the driver wireless on the Toshiba site.
  In addition, you can find all the drivers on the CD tool & utilities. There is an option to install the Wlan driver.
  However, what wireless card is your unit has?
  As I know the laptop was supplied with the card Atheros and Intel.

  If you unit has an Atheros card, you will need to install the driver of customer, nursery and Wireless LAN Wireless LAN. To install it, simply run the Setup file.
  If you have an Intel card go to Device Manager. In the network adapters, you can find the Wlan card. Right-click on the map. Here, you can use the driver option to update or install the driver.

  Good bye

• How to install driverupdate LAN for Qosmio G20?

  In response to an alert from Toshiba, I downloaded an updated their site driver LAN driver. I can not find, however, any info on how to install it despite the statement on the website info would be on this site or in the downloaded file.

  No icons probably looking in the file to produce anything. Any suggestions on how I might proceed? I have a Qosmio G20 (PQG21).

  You'll have to do it the manual way:

  (1) unpack the contents of the downloaded lan - xp - 80430.zip file to a temporary location as c:\landriver
  (2) open the control panel and double-click the system icon
  (3) in the brand-new "System Properties" box click on HARDWARE on the top bar
  (4) now, click on 'Device Manager' and a new box will appear with several tiny icons.
  5) click on the "Network adapters" icon and select your Lan card (.. .should say something like INTEL and 100)
  (6) right click on the entry of Intel (r) and select "UPDATE DRIVER"
  (7) now follow the instructions in the "Update Wizzard'...

  (x) No, not this time---> NEXT
  (x) install from a list or a specific location---> NEXT
  (x) do not search, I will choose the driver to install---> NEXT
  (x) have Disk---> NEXT

  (8) where it is said: "copy the Builder files from" you must NAVIGATE to the folder you created in step 1 (c:\landriver)
  (9) now choose 'E100b325.inf' If you are running Windows XP OR E100ant5.inf if you are running Windows 2000 [choose the option for Windows XP]
  10) confirm with [ok] in the event that a box will appear telling you that the drivers are not certified by Windows, blah blah blah
  (11) reboot if your computer ask

  I don't think its necessary to update your LAN driver unless you had problems with your network adapter.
  I have described the procedure of a manual update which is exactly the same for each device. I can't
  confirm if these drivers work on your computer, even if they should according to INTEL.
  If you face problems to use your LAN card after the upgrade of drivers, do not hesitate to roll back to your previous settings... but for the moment let's hope we don't need to explain how to do this. ;)

  Good luck

  chain

• Portege M300 - replacement of HARD drive failed

  Dear all,

  I have a Portege M300 I bought around 3 or 4 years and I am very happy with and without any problems. The laptop came originally with a 60GB and I wanted to upgrade to one with greater capacity, a 160 GB! My laptop is about 1.2 GB of Ram and runs on windows XP SP3.

  I recently bought a Samsung HD-160 (160GB) which should be compatible with my laptop. After installing from scratch and used for about 2 weeks, the computer suddenly stopped. HARD drive stopped spinning and a #0 ERROR came when I tried to restart. There was NO WAY to drive HARD turn again so I contacted Samsung and they replace. The HARD drive has a slight smell of burnt component but very light.
  I replaced the HDD failed with a 2nd replacement and to my disbelief, the SAME THING happened again just after 3 hours of use! I contacted Samsung and once more they will send replace me, with the same type of hard disk. I tried to get explanations of Toshiba and Samsung for why this happens, but so far I have no explanation.
  Without hesitation, I gave my original 60 GB Toshiba drive who was thankfully still my documents and the laptop is happy again touch wood.

  What I am doing wrong? can someone help me please go to the bottom of this so I do not experience the same problem with my 3rd replacement? I wish I had a bigger hard drive on my laptop and I think all of them must be compatible. I buy one that should be compatible with my Portege M300. Both are valued at 5 v

  I have to add to what has just occurred to me now that I have installed all the Toshiba original programs too on my Samsung HDD out of Windows XP, including the utility that protects the disk in case of Vibrations. This could be the problem by any chance? This utility only for Toshiba's brand HARD drive? Any ideas or other suggestions on this issue please?

  Thank you very much for your attention.

  Carmine

  Portege M300 is pretty old laptop and maybe you should be careful with these upgrades.
  According to specification for laptop, your laptop can handle with 100 GB hard drives, but I'm sure you can use 120 GB as well.

  Then maybe you should try to upgrade the disk with 120 GB of HARD drive to see if everything will be OK. I think also 120 GB is enough and you have enough free space for the data backup.
  What do you think about this?

• Cannot install driver LAN on my Satellite C660

  I have a Satellite C660 - 1 x 4, PSC1NE. There only 3 months, I had a problem with the hard drive, the authorized service had replaced the hard drive and now I just reinstalled Windows 7 64 bit I saved all the correct drivers from the site on a memory stick and it is not the first time when I install the drivers same myself but now after returned to service Wireless LAN works fine but I can't install the driver of LAN.

  I don't really know what to do more...

  If I understand the new HARD drive, you have installed the version of Windows own and dot you want to use the original OS that you got with your laptop. Is this correct?

  You try to install this driver?

  What happen when you try to install the LAN driver?

• How to install driver without setup.exe?

  Hello
  How to install lan drivers (wireless and wired) I got from the Download Center. There is no setup.exe file in the zip.
  Thank you

  Hello!

  > There is no setup.exe file in the zip.

  You can download a free tool called 7-zip. Just download and install. Then you can extract the zip, rar files, and many other formats.

  Good bye!

• How to download driver LAN for Satellite A100 PSAA8E

  Can someone help how to download the LAN driver for my machine. I found three LAN drivers but impossible to download the toshiba europe site.

  Thank you

  What's the problem?
  I found on the different driver Toshiba's European site for different OS version.
  You need to download a compatible. If you are using XP choose the version the most recent OS XP and if you use Vista or XP MCE choose another.

  All that s.

• How to install Driver WD SES Device?

  Original title: Abdullah Mahar

  Hello!   How to install WD ITS device driver.

  Hi adil Mahar,.

  If you use a new device, you check the updates of Windows for driver updates and install if all drivers are available for the device to Western Digital (WD).

  For more information, see the articles:

  Looking for drivers

  You can also see the Western Digital website to install the latest version of the drivers for the device.

  http://wdc.custhelp.com/app/answers/detail/A_ID/1708

  You can also check out the link to the thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/my-book-WD-SES-device-USB-doesn ' t-have-a-driver/d5a255c7-545c-45f4-9e15-8528384daa80

• Re: How to install driver for SM Bus controller?

  I have the yellow warning against the Sm Bus controller triangle in Device Manager when I try to update the driver it is not found can help you. I did a search on the forum for SM bus controller nothing helps.

  See you soon
  Blanketstacker

  If you want to discuss these problems you must provide some basic information like the model of laptop and operating system preinstalled, so we can check the Toshiba download page and see which driver is available here.

  Furthermore, have you installed driver right chipset for your machine and your preinstalled operating system?

• Re: How to install the LAN for Windows XP on Portege R500 driver?

  The Toshiba drivers download site I got the LAN driver 9.6.31.0 for Windows XP on Toshiba Portege R500. Most of the downloads contain a setup.exe for installation, but it does not work. The Installation Instructions on the same site do not include instructions on it.

  How can I install this driver?

  Hello

  You are a beginner or an experienced user of PC?

• Portege 4000 - how to install the display driver for XP?

  Hi-

  I did a clean install of XP Portege 4000. The system has been previously default 98SE.

  Noticed that there is a yellow exclamation point in other devices about the video controller (VGA compatible). I downloaded the display on the Toshiba site driver (if it is the right thing?), but can't seem to install. There is no setup.exe to help me.

  My XP screen covers only 3/4 or more of the screen total, so that something is wrong somewhere...

  Hello

  No, Toshiba don't support Linux or Ubuntu on the Portege 4000 and you can t find drivers for it on the Toshiba page. Only Windows drivers are available.

  I m not an expert in Linux, but as far as I know you don t need additional graphic driver for Ubuntu. You should only change the resolution of the screen or something in the settings of the screen. I had the same problem on the first time I used Linux and I could solve it without additional driver but I put t know how I did it :(

  Good bye

• Portege R100 - how to install after Exchange of HARD drive?

  Hello world
  I'm new to this forum and I want to know exactly where I'm wrong. I have this portege r100 laptop and the hard drive gave a few days ago. Because I am a novice when it comes to computers, I left the laptop with an engineer, that I found on Kijiji.
  Unfortunately, the engineer could not load any operating system on it. I go through this forum and loads found useful answers, but alas, still the same problem.
  Could someone guide me in the right direction. I would be really grateful that I have exams coming next week and really need the laptop.

  I don't have any CD-ROM compatiable only an external floppy drive.
  I tried to install using the windows startup disk (x 6 downloaded from the microsoft Web site), but after the 6 disc it asks me 3 options.

  1. press ENTER to install
  2. recovery console option of
  Output 3.F3

  When I press on enter is not superimposed my cd rom which I figured out is not compatiable. If I leave the connected cd rom it says unmountable boot disk. It gives me a bsod. Is there another way, I could install the operating system using only the FDD.
  I'd appreciate it really all the help of the experienced members of this forum.
  Thank you.

  First of all, you can not use any external CD/DVD drive... you must use a compatible and recommended by Toshiba.

  Secondly, I you could try to connect the HARD drive to another computer using the USB caddy.
  Then copy the i386 to the HARD disk folder.
  Then, you can run the winnt.exe file to start the Setup program.

  Once configuration is complete plug the HDD to the Portege and tries to start
  It is only theory, but maybe it won't work