Portege M400-103 starts very slowly

Similar Questions

• Portege M400-103's unstoppable to restart

  I have a portege m400-103 at the end of year 2006.

  A few months ago, I found a trouble - if I reboot the noutbook, then after the detection of material and enter the password nout, turn off the power and from new cycle. Reset of the supply, which happened before the operating system starts.

  After removing the hard drive, turn on, turn off, install hard drive again and power on in 50% starting normally.
  I see the SMART hard disk and bad blocks - all normally.

  And yet another thing - if nout not to restart the nut - all working fine a few weeks without any problem. I close the lid and note go to sleep and waik upward then absolutly fine in a few weeks.

  What can I do with it?

  Hello

  It's a little difficult to understand the detachment, but it seems that the laptop doesn't start correctly sometimes.

  > I see the SMART hard disk and bad blocks
  SMART monitors the HARD drive and provides details if something is not wrong with the HARD drive
  Maybe the problem is related to the HARD drive
  This may be possible

  So I recommend you to check the HARD drive. Maybe the laptop would serve using a new HARD drive

• update XP June 29, 2011 caused my pc to start very slowly

  the last update of xp June 29, 2011 has caused my pc start very slowly, what is happening on it takes 3 hours to start

  It is important to know which to update. On July 29, I installed the update of KB2541763 (and had no problem with it). Is this the one you mean? Or is it perhaps one of the pilots or optional updates?

  If the update is at fault, you should be able to remove it through Control Panel Add / Remove programs. Then, you must restart your PC. If it still does not work, you must run the system restore, which dates back to July 28.

  I highly recommend you analyzing your PC from malware, too. MalwareBytes' Anti-Malware would be a good starting point.

• Portege M400-103 powers - the automatically every morning at 09:00

  My Toshiba Portege M400 powers - the automatically every morning at 09:00. All auto market options are disabled and also my version of BIOS is upgraded to the latest version 3.20. It is very embarrassing for me because at 09:00 I'm in my car, and my laptop is in my bag. When I get to the desktop from the laptop is very hot.

  Any ideas what could be the problem?

  Thank you!

  / Vassil

  Hello

  I hope that your laptop is not in tablet mode, because if the laptop into hibernation in tablet mode and when you accidentally stick the buttons under the screen of the laptop can be awakened from hibernation mode.

• Windows 8 starts very slowly

  Original title: techinecal problem

  I have windows 8. the problem is that startup time is too long .it takes about 5 to 7 minutes to start early. so please, how could solve this problem?

  To find what is causing a computer to start more slowly than normal, you should do this

  Install the WPT (windows Performance Toolkit) http://social.technet.microsoft.com/wiki/contents/articles/4847.install-the-windows-performance-toolkit-wpt.aspx  

  Open a Command prompt with administrative rights (right click > run as admin) and run the command

  It will restart your computer so back up your data before doing the below

  As usual it's always a good idea to create a restore point & or back up your data.

  xbootmgr - profile stackwalk - dispatcher, boot - traceflags base + latency + readythread + cswitch - notraceflagsinfilename - postbootdelay 10

  
  

  
  

  When it's done, it will create a file (usually boot_1.etl) that you are looking for.  Find the file and upload it to your skydrive and give us a link to the file in your next post

• My Portege M200 starts very slowly

  A week ago, my computer decided to go slow on me, it took five minutes to load upwards from when I walk, I thought that I could easily solve this problem using windows restore and go before that this was the case. (it happened after I defragmented my hard drive which was strange)

  Restore did not work and now some of the programs do not work as tablet pc Input Panel.
  Some drivers have gone haywire, my external floppy drive and CD - RW will not work now, (the cd is an ide to usb in an external case)

  I have a portege m200.

  is their anyway I can fix it these things?

  I want to reset the entire computer sing condition factory recovery CD but it won't start my Player external CD and i cant aford another.

  Hello

  Well, if you want to retrieve the device you so you need a supported and compatible Toshiba external drive. Not all external drives are supported and work correctly.
  The Portege M200 supports the recovery through the BIOS (by pressing 'C') with the USB 2.0 card and PCMCIA (16-bit and Cardbus).
  As far as I know the discs, you can use:
  Toshiba PA3352E-SCD2, CD-RW/DVD-Rom USB 2.0 drive
  Toshiba PA3402E-1DV2, Rev.501, USB 2.0 DVD Super Multi Drive,
  Toshiba PX1055E-1NST (16-bit) PC Card Reader, cable II, PCMCIA

  Well, if you have n t not one so you can contact Toshiba. It should be possible to install the OS.

• Publisher XP starts very slowly on my Equium M50

  Hello

  Just bought an Equium M50-164 and I have problems to open Microsoft Publisher files.

  Generally, the computer is very fast compared to my old one but takes forever to open a file in Microsoft Publisher. Even when it does not open it opens all the tables that were created on the file.

  I have Microsoft Office, Autocad 2005 and Microsoft installed Highway also. They seem to work fine.

  Concerning

  Hello

  Well, it's not easy to say why it starts slowly. Slow performance can be a very difficult problem to diagnose because there are many causes of the slow performance. More in my knowledge Microsoft programs (IE. Editor, office, etc.) are very complicated software tools and it s is not easy to say which and how much process is running in the context of the BONE. I recommend you to search on the Microsoft Web sites for useful information.
  You can also check this link:

  http://www.Computerworld.com/softwaretopics/OS/Windows/story/0, 10801,104326, 00.html? SKC = windows-104326

  Good bye

• Satellite A200 - 1 GB starts very slowly - which is not necessary in msconfig

  My Satellite A200 - 1 GB is very slow to start, so I went to msconfig and disabled some of the 'not required' in the list but still most of them not knowing the significance of each.
  Can you get it someone pls. Let me know the * essential startups that is needed for Vista Home Premium *.
  I don't want any antivirus, messangers or any other software on my startup... except for Windows and Toshiba, essential programs running at startup.

  Thanx.

  Hello

  speedup refer your Vista you should visit the following:

  http://www.ExtremeTech.com/Article2/0, 1697,2151341,00.asp

  Has been really helpful to me and I think it would also be for you.

  Welcome them

• EtreCheck results for Mac start VERY slowly

  I just ran EtrCheck and cannot find anything that could trigger my iMac start slowly. Verification of any help would be greatly appreciated.

  Ed

  EtreCheck version: 2.6.6 (226)

  Report generated on 02/12/15, 08:29

  Time 02:38

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  iMac (27-inch, late 2009)

  [Click for plug technique]

  [Click here for the User Guide]

  iMac - model: iMac11, 1

  1 2.8 GHz Intel Core i7 CPU: 4 strands

  8 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1067 MHz

  0/DIMM1 BANK

  OK 2 GB DDR3 1067 MHz

  BANK 1/DIMM1

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: (Does that mean?)

  ATI Radeon HD 4850 - VRAM: 512 MB

  iMac 2560 x 1440

  Software: (Does that mean?)

  OS X El Capitan 10.11.1 (B 15, 42) - since startup time: less than an hour

  Disc information: (Does that mean?)

  ST31000528AS disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  Macintosh HD (disk0s2) /: 999,35 (Go 178,39 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  OPTIARC DVD RW AD - 5680H)

  USB information: (Does that mean?)

  Apple Inc. 7.89 GB IPod

  disk2s1 (disk2s1) : 254 KB

  IPOD of Ed iPOD (disk2s2) / Volumes/Ed: 7.89 GB (4.25 GB free)

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  Western Digital external HDD 1.5 to

  EFI (disk1s1) : 210 MB

  Time Machine (disk1s2) Volumes/Time Machine: 1.35 TB (137,64 GB free)

  Scratch (disk1s3) / Volumes / Scratch: 150,07 GB (7,51 GB free)

  Card reader Apple

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Kernel extensions: (Does that mean?)

  / Applications/Parallels Access.app

  [loading] com.parallels.virtualsound (1.0.36 36 - 10.6 SDK) [click for support]

  / Applications/Parallels Desktop.app

  com.parallels.kext.hypervisor [no charge] (10.2.2 29105 - 10.7 SDK) [click for support]

  com.parallels.kext.NetBridge [no charge] (10.2.2 29105 - 10.7 SDK) [click for support]

  com.parallels.kext.usbconnect [no charge] (10.2.2 29105 - 10.7 SDK) [click for support]

  com.parallels.kext.vnic [no charge] (10.2.2 29105 - 10.7 SDK) [click for support]

  / Library/Extensions

  com_sony_driver_dsccamDeviceInfo00 [no charge] (1 - SDK 10.7)

  Launch officers: (Does that mean?)

  [loading] com.adobe.CS4ServiceManager.plist [click to support]

  [loading] com.divx.dms.agent.plist [click to support]

  [loading] com.divx.update.agent.plist [click to support]

  [loading] com.oracle.java.Java - Updater.plist [click to support]

  [loading] com.parallels.mobile.prl_deskctl_agent.launchagent.plist [click to support]

  [operation] com.sony.SonyAutoLauncher.agent.plist [click to support]

  Launch demons: (Does that mean?)

  [loading] com.adobe.fpsaud.plist [click to support]

  [loading] com.adobe.versioncueCS4.plist [click to support]

  [loading] com.bombich.ccc.plist [click to support]

  [operation] com.bombich.ccchelper.plist [click to support]

  [loading] com.malwarebytes.MBAMHelperTool.plist [click to support]

  [loading] com.microsoft.autoupdate.helpertool.plist [click to support]

  [loading] com.microsoft.office.licensing.helper.plist [click to support]

  [loading] com.microsoft.office.licensingV2.helper.plist [click to support]

  [loading] com.oracle.java.Helper - Tool.plist [click to support]

  [loading] com.oracle.java.JavaUpdateHelper.plist [click to support]

  [operation] com.parallels.mobile.dispatcher.launchdaemon.plist [click to support]

  [loading] com.parallels.mobile.kextloader.launchdaemon.plist [click to support]

  User launch officers: (Does that mean?)

  [loading] com.google.keystone.agent.plist [click to support]

  Items in user login: (Does that mean?)

  None

  Other applications: (Does that mean?)

  [ongoing] com.etresoft.EtreCheck.61152

  [ongoing] com.parallels.inputmethod.ParallelsIM.108832

  [ongoing] JP.co.Canon.cijscannerregister.159072

  Plug-ins Internet: (Does that mean?)

  OVSHelper: Version: 1.1 [click for support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 2.3.8.1 [click for support]

  FantashowPlugin: Version: FantashowPlugin 1.0.0.0 - SDK 10.7 [click for support]

  OfficeLiveBrowserPlugin: Version: 12.2.7 [click for support]

  Silverlight: Version: 4.0.51204.0 [click for support]

  FlashPlayer - 10.6: Version: 19.0.0.245 - 10.6 SDK [click for support]

  DivX Web Player: Version: 3.4.1.14 - 10.10 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 19.0.0.245 - 10.6 SDK [click for support]

  iPhotoPhotocast: Version: 7.0

  SharePointBrowserPlugin: Version: 14.5.8 - 10.6 SDK [click for support]

  AdobePDFViewer: Version: 9.0.0 [click for support]

  JavaAppletPlugin: Version: 71 check the version of Java 7 update

  User Plug-ins internet: (Does that mean?)

  fbplugin_1_0_3: Version: Unknown [click for support]

  WebEx64: Version: 1.0 - 10.6 SDK [click for support]

  Web of Google Earth plugin: Version: 7.1 [click for support]

  SlingPlayer: Version: Unknown [click for support]

  Safari extensions: (Does that mean?)

  Open in Internet Explorer

  Audio Plug-ins: (Does that mean?)

  DVCPROHDAudio: Version: 1.3

  3rd party preference panes: (Does that mean?)

  Adobe Version Cue CS4 [click for support]

  Connect360 [click for support]

  Flash Player [click for support]

  Flip4Mac WMV [click for support]

  Java [click for support]

  MacFUSE [click for support]

  Perian [click for support]

  ArcanaStartupSound [click to support]

  Time Machine: (Does that mean?)

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 999,35 GB disc used: 820,96 GB

  Destinations:

  Time Machine [Local]

  Total size: 1.35 TB

  Total number of backups: 23

  An older backup: 01 08/15, 21:19

  Last backup: 30/11/15, 15:18

  Backup disk size: too small

  Backup size 1.35 TB< (disk="" used="" 820.96="" gb="" x="">

  Top of page process CPU: (Does that mean?)

  5% WindowServer

  kernel_task 2%

  1% SDM

  1% fontd

  0% mds_stores

  Top of page process of memory: (Does that mean?)

  673 MB kernel_task

  451 MB softwareupdated

  Mds_stores 344 MB

  Mdworker (18) 221 MB

  Mdworker32 (2) 98 MB

  Virtual memory information: (Does that mean?)

  2.14 Go free RAM

  5.85 GB used RAM (3.24 GB being cached)

  Used Swap 0 B

  Diagnostic information: (Does that mean?)

  2 December 2015, 08:11:56 AM/Library/Logs/DiagnosticReports/Microsoft Outlook_2015-12-02-081156_ [redacted] .hang

  2 December 2015, 08:07:27 ~/Library/Logs/DiagnosticReports/Microsoft Outlook_2015-12-02-080727_ [redacted] .crash

  2 December 2015, 07:57:28 self-test - spent

  Please take each of the following steps that you have not already tried it. Tests after each of them. Back up all data before making any changes.

  1. set the default boot disk.

  2. unplug all devices wired except those needed to start. If there is no change, reconnect them

  3. reset the system management controller.

  4. reset the PRAM. Subsequently, you will need to repeat step 1.

  5. reset the printing system.

• Trolling, laptop screen drivers acting weird, Windows start very slowly

  The screen of my laptop had finally died recently, so I took it into the store of the computer down hence my apartment is. Real easy, just put in a new screen. I have my laptop back and the screen is fine now, but since I found, he acted very strange. Any time I did scroll upwards or downwards, or move a window, that it is delayed and there is this weird wave effect. That I can't plug my laptop go back to my TV via HDMI, and now I can't play Lord of the Rings Online. I tried to install a video driver via Steam for the GeForce Go 7400, and now it takes about 10 minutes for my computer starts after scoring in windows. I'm not really sure to know how to find the specs and everything, but if someone could help me I would be very happy.

  Hello.

  Check the site of laptop manufacturers with regard to the specifications of the machine you.  Look at what graphic chipset provider is. He must check if it is nvidia.  Go to their site and download the latest drivers.  They have a program online to find the best driver for your system.  Download it, and if all goes well, this should you solve graphical errors and restore your HDMI.  NVidia will direct you ensures the latest driver package and complete for your machine.

• Cap5 starts very slowly

  Hi all!

  I have a very irritating problem when I (try) to open Captivate 5. At the present time, it takes more than 10 minutes before you see the screen of welcome and again a few minutes before I can open or start a project. 1 out of 3 times he opens not at all. If I look at the Task Manager it uses of course more than 130 MB of RAM, but nothing happens.

  But if I open Captivate offline (I simply close the network connection) I can start using cap in 20 seconds. So I think that the connection network more, the proxy or firewall blocking some communication with the server from adobe (?). Due to company policy, I can't change all the settings of firewall or proxy. Someone knows a workaround for this (except closing the connection of network before each startup)?

  All other parts of the e-Learning suite work well, it's only of Captivate. Information of the machine: Windows XP, 2 GB Dual-Core, 4 GB RAM, elearning suite 2.

  I appreciate really any suspicion on that.

  Thank you very much

  Marco

  It seems to me that you need to store your Captivate projects on a network somewhere and not on your local drive of the PC. Is this correct?

• My computer starts very slowly,

  I menu start I found a program called pointing device Alps can someone tell me what he please @.

  Hi geoffbarnes,

  (1) since when are you facing this problem?

  (2) are - what you remember for change?

   

  Pointing device Alps could be your input device such as the mouse or the keyboard preinstalled by your computer manufacturer. It is normally your touchpad software.

   

  Method 1:  Let flow the fixit available in the link below and then check

  Difficulty of Windows system performance slow computer problems

  http://support.Microsoft.com/mats/slow_windows_performance/en-us

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• CS6 starts very slowly

  [[I M4800 Dell mobile workstation-Photoshop CS6 run very very slow (40 sec) - I have old machine M4300 (Up current M4800 grade) and launch of Photoshop much more quickly on an old machine (5 s)]]

  I have uninstall and CS6 re - install but nothing changes-wonder if any have similar problem - I'm stuck here-not anyone can help?

  Problem solved, upgrade BIOS of M4800 solve this problem-it's hard to imagine that the BIOS and PS6 launch speed linked to each other.

• Process scheduler start very slowly

  Hello
  Fscm90, tools 8.50 on Win 2003 Oracle 10 g DB
  PS takes about an hour to start:
  the journal of Tuxedo

  113150.MYSERVER!BBL.5624.2452.0: 10-29-2010: Tuxedo Version 10.3.0.0 with VS2005, 32-bit, Patch Level (none)
  113150.MYSERVER!BBL.5624.2452.0: LIBTUX_CAT:262: INFO: Standard main starting
  113152.MYSERVER!PSMSTPRC.7128.7648.-2: 10-29-2010: Tuxedo Version 10.3.0.0 with VS2005, 32-bit
  113152.MYSERVER!PSMSTPRC.7128.7648.-2: LIBTUX_CAT:262: INFO: Standard main starting
  113202.MYSERVER!PSDSTSRV.7844.2476.0: 10-29-2010: Tuxedo Version 10.3.0.0 with VS2005, 32-bit
  113202.MYSERVER!PSDSTSRV.7844.2476.0: LIBTUX_CAT:262: INFO: Standard main starting
  113206.MYSERVER!PSPRCSRV.628.6844.-2: 10-29-2010: Tuxedo Version 10.3.0.0 with VS2005, 32-bit
  113206.MYSERVER!PSPRCSRV.628.6844.-2: LIBTUX_CAT:262: INFO: Standard main starting
  124223.MYSERVER!PSMONITORSRV.2032.8068.-2: 10-29-2010: Tuxedo Version 10.3.0.0 with VS2005, 32-bit
  124223.MYSERVER!PSMONITORSRV.2032.8068.-2: LIBTUX_CAT:262: INFO: Standard main starting

  And:
  Pre log:

  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](0)    Log Fence is set to 3 = Display detailed message
  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](3) Validating Application Engine Server Setup....
  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](3)       Processes with Generic Process Type of Application Engine:
  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](3)                XML Publisher            :    3
  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](3)                Optimization Engine      :    2
  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](3)                Total:                        5
  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](3)    CPU Threshold Setting : 0  percent 
  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](3)    Memory Threshold Setting : 0 percent 
  PSPRCSRV.628 (0) [10/29/10 12:42:22 VP1@MYSERVER](3)   Process Scheduler Server PSNT running in remote mode
  PSPRCSRV.628 (0) [10/29/10 12:42:22 VP1@MYSERVER](3) Process Scheduler Server PSNT registered
  PSPRCSRV.628 (0) [10/29/10 12:42:22 VP1@MYSERVER](3)    Server action mode: Initializing
  PSPRCSRV.628 (0) [10/29/10 12:42:22 VP1@MYSERVER](2)   PSDaemon disabled
  PSPRCSRV.628 (0) [10/29/10 12:42:22 VP1@MYSERVER](3)    Checking Process cancels...
  PSPRCSRV.628 (0) [10/29/10 12:42:22 VP1@MYSERVER](0)    Server Initialization Complete
  PSPRCSRV.628 (0) [10/29/10 12:42:22 VP1@MYSERVER](0) Server started
  PSPRCSRV.628 (0) [10/29/10 12:42:37 VP1@MYSERVER](3)    Server: PSNT checking status...

  No problem on the database. No users connected still.
  Can not understand.
  
  Thanks for the help.

  You have multi-CRP and multi-appserver to the same application domains? Please, such us more info on your architecture: e.g. all in one box...

  Nicolas.

• Windows 7... sometimes starts very slowly, apply group policy slowly.

  I have a 500 PCs in Windows 7 environment.  Essentially, the boot of machines well, apply fine policies and logon.  Occasionally, PCs random slow startup (get hung at the Windows startup splash screen) and get hooked to the application of Group Policy (Folder Redirection policy application).  It is completely random and cannot usually be duplicated on site.  My question is where can begin to solve the problem?  Are there tools available who can attest to the results?

  Hi Garon

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  TechNet: ITPro - Windows 7 Networking Forum ITPro:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  TechNet: ITPro - Windows 7 Installation, Setup, and deployment Forum: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/threads

  Concerning