Portege M400 3G: 3G after Vista Setup program cannot find the 3G card

Hello

I have a tablet pc toshiba M400 3 g brand new. It's great. But Iniatitly Winodws Xp 2005 tablet edition has been installed. Now I have installed Vista on this machine, everything works but module 3G of the exception.

3 g novatell seems to work, but with each 3g program, it gives an error that it can't find the card 3g. What can be the solution.

There is a sticker on the laptop with vista compatible...

Kind regards
Remco Ploeg

Hello

The card 3G needs a driver compatible!
The Toshiba page a Novatel 3 G driver for Windows XP Tablet Edition, but NOT for Vista.
This software allows communication between the controller of 3G and your computer.

I would recommend research on Novatel site for a supported and compatible Vista driver 3G!

Good luck

Tags: Toshiba

Similar Questions

  • The Setup program cannot find the installtion languages in C:\ Windows\SysWOW64\InstallShield\SETUP. COVER file. Error 105

    I am trying to install a HP printer.  When I run the setup.exe and click the install, I get the message:

    Setup initialization error

    The Setup program cannot find the installtion languages in C:\ Windows\SysWOW64\InstallShield\SETUP. COVER file.

    Error 105

    When I do a search for the error message I get no results.  So I ask the community if there is a fix or work around this issue.

    Hello

    What version of windows you are using?

    The program is not compatible with your version

    List of limitations in 64-bit Windows
    http://support.Microsoft.com/default.aspx/KB/282423#appliesTo

    To run the troubleshooting program compatibility Troubleshooter

    1. Open the troubleshooting program compatibility Troubleshooter by clicking the start , and then clicking Control Panel. In the search box, type troubleshooting tool, then clickTroubleshooting. Under programs, click on run programs for previous versions of Windows.

    2. Follow the instructions contained in the resolution of the problems.

  • HP photosmart c4580 program cannot find the installation 7zs7e9a file

    HP photosmart c4580 after installation at the start of problem cannot find the 7zs7e9a Setup file.

    cancellation of the attempt to install the software will run without problem.

    tried to extract files without 7zs7e9a file in the temp directory

    all solutions?

    I solved this problem. It was the error of Microsoft Installer program tried to run the corrupted original due to an MSI installation. the quickest way to fix the problem was to uninstall and reinstall the hp software.

    PS

    OS vista Home premium 64-bit

    Thank you for your quick response

    concerning

    clhxo

  • Portege M400 system hangs after Vista system restore

    My system crashed by doing a system restore. Now on startup it gives errors. When I boot from the CD, I go for the choice of the partition to install on and there is no partition, and it has this error:

    No hard drive found. Click on load a driver to provide for installing mass storage driver.

    I went to Toshiba and Microsoft for help. Or can direct me to the right solution. I can't find my recovery disk. I have just the windows installation disc. Is there an easy fix for this?

    * original title - cannot fine partition on Portege M400 during installation of Windows Vista Business 32 bit.*

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    For any problem, reinstall Vista, contact the manufacturer of your laptop.

    Here is the General info on reinstallation of Vista:

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    See you soon.

    Mick Murphy - Microsoft partner

  • After uninstalling a program cannot remove the icon on the desktop

    After you uninstall a program, I stayed with the icon on my desktop. I tried to remove the icon, but I couldn't. I got an error message saying it did not find the program so could not delete the message icon. I ran across this error often and would like some comments on how to remove icons or everything that's left after you have removed (uninstalled) a program, thanks.

    The easiest way is to reinstall the program > removes 1 icon > then uninstall the program again.

    See you soon.

    Mick Murphy - Microsoft partner

  • The program cannot find the execution engine

    I create an executable before normally and after as a Setup program. When I try it on computer with license complete LabView program works, but if I install it in another pc, it asks me to install the runtime, but the runtime engine is installed in the pc. What kind of error can cause this problem?

    Hi vsara,.

    If you use VISA functions in your program, you need to install the runtime VISA (VISA OR Runtime) on the other PC.

    Mike

  • The Windows XP Setup program cannot detect the Partitions

    My disk Installation in Windows XP cannot detect all partitions when I try to install it. How to install Windows XP? Windows 7, however, can detect my partitions, so I have no choice but to format this netbook with Windows 7.

    I want in my Windows XP system. Thanks for any help guys. :)

    Boot into the BIOS, then set it to the hard drive in IDE mode.

  • Program cannot find the hwdlln32.dll file, what I'm doing...

    When you try to insert a personal signature in doc I get this message...

    Hello

    Refer to this link and see if it helps:

    http://support.Microsoft.com/kb/832978

    If this does not help, you can try to check and scan SFC:

    http://support.Microsoft.com/kb/310747

    Let us know the results.

  • vCenter 4 installation program cannot find the 32-bit system dsn

    I try to install vcenter 4 and keep my existing database (on the remote sql server)

    I created a system dsn by using the following page: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1010401

    But the dsn appears in the installation screen.

    The only option I get: (please create a 32-bit system DSN)

    No idea how to fix this?

    I try to install on windows 2008 standard x 64 vcenter.

    thepeoplesvalley wrote:

    I had to change 'SQL Server' to ' SQL Server Native Client 10.0', now it works well. "

    Yes, it's a requirement for the 2.5 and above.  The Native Client.

    don't ' forget to assign points to those who you feel have provided useful information by clicking the 'correct' or 'useful '.

  • The product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista business product key

    Product key bad for the wrong version?

    Hello

    Recently the computer in business inherited from a friend, very fast and very good. Regardless of the operating system no - geniue, is with Vista Business, while the thumbnail of authentication is Vista Ultimate. I took a screenshot of what it says when I put Vista Ultimate product key: (it does not appear if you are unable to use it: P)

    http://S13.PostImage.org/57nfn5pqv/vistareg.jpg

    He said: "the product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista Business product key."

    How would the installation of Windows Vista? My files would still be there when you need him? My drivers would still exist? No matter what to get deleted or become unusable? He would return to SP1? Any response is welcome.

    You can order form of the manufacturer's recovery media.

    The reason why the system as non-authentique shows currently is using a license in Volume KMS - these licenses must be re-activated at least every 6 months by connecting to the KMS user license activation server.

    It will require a reformat and reinstall whatever you do, unless you can connect to the KMS - Volume media server cannot be upgraded under normal conditions.

  • "The product key you entered will not work with this edition of windows vista. You must run the windows vista Setup program or enter a windows vista product key. »

    I bought a laptop HP three years ago in Dubai, now I am in India, my family problem does not activate windows vista and also use it now, I try to use but asked the system to activate product key not found the product key at the bottom of my laptop I enter the product key but the system says "the product key you entered will not work with this edition of windows vista.»  You must run the windows vista Setup program or enter a windows vista product key. "In my company sticker a HP laptop, it says" Windows Vista Home Premium, also found in computer ownership 'Windows Vista Ultimate' and as low property said: you must activate today and return their product ID: 89580-014-0000025-71152, but in my laptop near the product key, wrote a different number which is "89580-014-0000025." what is the problem and how to solve that advice me please. ""

    Hello

    You can use this Recovery Partition to reinstall Vista to his new condition with the right edition of Vista.

    This recovery partition was photographed on your hard drive by HP during the manufacturing of the factory.

    You press F11 on startup to start the process of recovering back to factory settings.

    Here is the information about HP.

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

    If the recovery partition is damaged, you can buy HP's Vista recovery discs for a small fee.

    If HP's Vista recovery disks, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon

  • Warning__program error__one or more files necessary for the operation of the memorex expressit label design studio are missing or corrupt. Please use the Setup program to reinstall the software.

    Tried to update to Safari that does not work after the update. Then my printer stop working. Get the following message: 'WARNING '.
    program error
    necessary for the operation of the studio of design of memorex expressit label one or several files are missing or corrupt. Please use the Setup program to reinstall the software. »
    Already uninstalled and re-installed the software manufacturer labels several times. No luck.

    It seems it all started to go wrong after your update of Safari went wong:

    http://www.Apple.com/support/Safari/

    Link above is for Support of Safari.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    We do not know your Label program Vista compatibility.

    Check if your program is Vista Compatible:

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

    Windows Vista Compatibility Center

    First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

    If this is not Vista compatible, read the info on the link above.
    It works for some programs, but not all.

    This applies to software programs, NOT hardware drivers.

    If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    It comes with Vista, upgrade install and activate Forum.

    Try the Vista programs Forum:

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

    See you soon.

    Mick Murphy - Microsoft partner

  • After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

    After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

    Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

    [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

    4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

    NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

    5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

    6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

    NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

    7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

    8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

    9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

    10. restart once again & test.

    NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Driver WiFi does not work - "this Setup program cannot run on this platform.

    I have a Dell Inspiron 14R laptop N4110. The problem is driver WiFi is not install properly. When I save the driver of the error is "this Setup program cannot run on this platform. Please select your operating system as a whole". I have download all the updates window and update my OS. Please help me to install the WiFi driver.

    OS: Windows 7 (64-bit) SP1

    AtulRai,

    Utility of portable computer system first, then the chipset drivers or in the rest of drivers will not install.

    Start with the portable system utility and the chipset drivers and follow the list.

    Rick

  • Is there a link to re - install CC2014 æ? I let the Setup program to remove the previous version when installing CC2015 AE and now also wish to have CC2014 installed.

    I let the Setup program to remove the previous version when installing CC2015 AE and now also wish to have CC2014 installed.

    Thanks in advance,

    James Edmunds

    When you open the Panel creative cloud, on the section "Find additional Apps", click on "All Apps" (right side) and select "Previous Versions".

Maybe you are looking for

  • How can I turn off shuffle on the latest ios 9. I don't care

    It was a maddening, any quest in the morning and I'm hoping someone can answer how to disable the option shuffle for IPAD. the reason for the caps is because I've been Googling all morning and every single response shows just iPHONE, screenshots, and

  • Satellite A200-1AE: How can I check my warranty?

    Hello!I have a Toshiba A200-1AE, I bought this mobile last summer (July), so I bought 1 year warranty extension (I should get 2 years in all), now how can I check how many days left at the end of warranty?

  • Acer Aspire not start after cleaning the fan and re - paste.

    I need help, I cleaned up my Aspire 5750 was dust accumulated during the last 3 years, I dismounted, clean the fan, re-glued the CPU and put everything back carefully, when I turned on it, the rotations of the fan for a while, then turns off, gets ba

  • How to make programs from the C: drive to another drive in Vista?

    I do not know how to move. I had never done this before. * original title - I need to move some programs from my c drive to another drive to make more space, I do not know how to do it please help? *

  • Purchase/installation of Vista

    I posted a few questions here lately on my two computers who went bonkers for awhile... If you have not read my thread on my laptop Vista crashing, I'll give you the dish. I was at my computer the other night, and restarted my laptop. Then, it wouldn