Portege M400 EZ5031 - not see HD disc format

Similar Questions

• Cant be able to see the disc format option while creating a virtual machine

  Hello

  When I try to create a VM, I can't able to see options disc format (thin provision) not only on his arrival for all hosts host, clusters, data center in Vcenter and and all data warehouses. Before it was working fine yesterday, I'm not able to see. How do we enable this option. What is the cause of this problem.

  Please help me VMware Guru. Since we very request with limited resources, we have to reverse the If select layout slim brand new virtual machine.

  Work around: enabled storage profile in one of the cluster and I tried it but no luck

  All are allowed and showing same

  Recent change of him that activity is carried out in our end is added to the new data store.

  Please see the screen shot for your reference below.

  

  continue to the section "Select a disk" and then under create a disk task, you will have an option under "Supply of drive" to select the desired disc type.

• Portege M400 - virtualization not available in BIOS

  Hello

  I have 2 Portege M400 (different models), as well with the BIOS version 3.8, but strangely in one of them, I have the virtualization option to turn on or off.
  But the other not, and it seems that I'm not able to do something to make this option available on this laptop.

  Is this a known issue? I could I solve it?

  Thanks in advance,
  VICTOR

  That these two books have been said jokingly with the same processor?

  You should know that not all Intel processors supports the Intel VT (virtualization technology)

  Therefore, sometimes VT option is not available in the BIOS!

  See you soon

• Portege M400 - does not start after a BIOS update

  IHH

  Please help me with my portege M400, I installed a new localized version of Windows XP, then I started to download the drivers from the Toshiba Web site, and the first thing I did was to install the new BIOS update. I don't know what version it was. Then he asked me to restart, after I did the reboot of the device unbootable and I see only an orange flashing :(

  Please how can I reset my old BIOS? Is this the end of my Toshiba?
  I am now in a forign country and there are noToshiba service center near me

  Please is there any similarly to help me

  Hello!

  I think that in this case you must go to an ASP. I put t see another solution for this problem because I think the ROM module has to be reflashed or the card mother completely must be replaced.

  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  And if you don t find an ASP in your country please contact an ASP in another country. I'm sure they will try to help you.

  Good bye

• Portege M400 does not accept the hard drive built into the boot password

  First I assigned a 9 character long password BIOS via the security utility help my new Toshiba Portege M400 (M400-139) with Windows XP Tablet Edition.
  He asked me if I also want to use the same password "repeated" to cover the 22 or so (I don't remember) characters long password of HDD, and I said ok.
  Then, I removed the BIOS password. But couln can't remove HARD drive password.

  I then created a different password which has been long 1 character and removed, but the HARD drive password remained.
  When I rebooted the system, he asked me the 'HARD Word built-in disk '.
  I tried to enter both the 9 and 1 character long passwords, but it says not 'certified '. What should I do?

  Should I write tha password over and over again, until it reaches 22 or more characters?
  If this is the problem, then, the number of characters long?
  I also think that the keyboard layout mapping can be a problem.

  I have never changed the setting page, but maybe that the default value of the plant is different from a windows.
  But I used only numbers and letters of international standard.

  I need immediate assistance.
  All my work is interrupted.

  I put t know if you have inserted the right HARD drive password or not but the non-certified message said that the inserted password is certainly not correct.
  Someone said that the message uncertified might if poster if you laptop was send hibernation instead of the stop mode mode after the password has been set.

  But I don t think that this could be relevant in your case.

  One question; have you tried to delete the password for HARD drive via the password of Toshiba or in the BIOS utility?

  Please check if you can edit/delete in the BIOS because I found the info in the manual M400 you must use the BIOS Setup to modify, delete the disk HARD ot password to set the password master HD!

  The manual also provide information if you forget the user Toshiba HARD drive password will not be able to help you and your HARD drive will be rendered completely and permanently unusable! When save the HARD drive password stop or restart the computer. If the computer is not shut down or restarted, the recorded data (password) cannot be correctly included!

  So maybe that's a reason why you can not change the HDD password?  :|

  Greetings

• laptop will not see a disc

  My presario c700 with Vista will not recognize a disc in my drive of CD-ROM I have completed all the steps under the cd/dvd drive not detected.

  The drive is listed in the BIOS to registration. I removed the soft ware and reinstalled. Nothing helps. Any ideas?

  Yes, I did. I tried movies, photos, discs of soft ware, I fimley added a wtiter of cd/dvd in replacement and to my surprise, it worked. I don't just use the built-in incd/dvd player.

  Thanks for your help.

  RVboie

• Why my DVD player will not see the disc of Windows 7 Installation?

  The TEAC DV-W58E DVD on my Dimension PC drive will play videos and games and will read and write data on DVD.

  Why he won't see the Windows 7 Installation disc that has delivered today? It's the only drive, that he has never read. He don't think that the drive is empty, sees just 0 used bytes, free 0 bytes.

  The drive is seen by the two other PCs but not one I want to install W7 on.

  My PC runs XP Professional and the Windows 7 Upgrade Advisor test and is up-to-date with Windows Update and has the latest driver for the DVD drive.

  I can't install the new operating system unless I can get the PC to read the disc.

  Cause the most likely not to read the DVD, is that its firmware is too old.  Double layer and encryption more recent methods are old 1 x, 2 x and 4 x dvd drives cannot read 16 x media recorded.

  Windows 7 has some minimum requirements.

  Windows 8 adds a lot of SPECIFIC requirements as NX Bit is supported in the BIOS.

  If you want to run Windows 7 on your PC, here's what it takes:

  • 1 gigahertz (GHz) or faster 32-bit (x 86) or (x 64) 64-bit processor

  • 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit), this excludes most INTEL 815 chipset

    Pentium 3 systems.  512 Meg is MAX for the 815 chipset.

  • 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  • DirectX 9 graphics device with WDDM 1.0 or higher driver.

• Portege M400: Could not update the BIOS after installing Vista

  Hello

  I have improved my M400 for Vista.

  I am trying to install all drivers Vista of Tosh. According to the instructions, the first thing to do is to update the bios.

  So, I download the bios (v3.60) on the site and run the .exe, but he tells me that I need the common modules.

  The only common modules that I can find on the Tosh site are for XP.

  Can anyone help?

  Thank you

  Steve

  You will probably need to update the BIOS before installing Vista on the laptop.
  Then, you could install Vista again.

• Portege M400 - recovery question

  I try to recover my pc (Portege M400-105) and I lost the format of raid. Now, my operating system can not find the hard drive. How can I reformat as raid with the antishok system partition?

  Hello

  Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  You will find everything you need.

  Good bye

• Portege R100: Can't see dvd external drive

  I just installed a new internal 40 GB hard drive in my portege r100, I partitioned the drive and formatted. I also installed the latest version of the bios (I think it is 1.6) but I can not now install XP to dvd because the portege r100 do not see the dvd drive external usb which I think is a LITE-ON 8 x

  Any suggestions?

  Using the supplied with the machine recovery CD? Also the machine will only start on a TOSHIBA USB dvd player. If it is not made by Toshiba, you will not be able to boot from it. Sorry

• Re: upgrade Portege M400 cpu?

  Hello
  I'm looking to upgrade my portege m400-ez5031 with the fastest cpu, it can handle.
  It's now the centrino duo T5600 1, 83ghz.
  I think the best is that T7600 is possible?

  Jin

  I don't know if he can run T7600, but I think you should read your motherboard specifications:

  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

• Shutdown in Vista with a Portege M400 problems

  Hello!

  I have a problem with my Toshiba Portege M400 (do not know if it is a matter for the Council of vista or portege support plate, anyway). I installed Vista Express Upgrade a few months ago and everything worked fine for a while.
  But over the last 4 weeks, my laptop seems to have a problem when stopping down. No matter if she's just hibernates or shuts down completely, the computer automatically turns itself after being off for about 5 seconds.
  I have to use the switch to turn it off again (and then it stays off). Any ideas? I haven't changed anything and it could be a hardware problem, but my guess is that it has something to do with Vista ;)

  Thank you

  Alex

  Hello

  installed some software or tools/applications/updates? Sometimes, a small update can disrupt the entire system and preventing it from functioning. So, just check what has been installed and it may be useful to install the new bios, maybe update all drivers etc... Make sure that everthing is real and up to date.

  Welcome them

• Photoshop CC 2015 does not see my SSD drive

  I could find any topic with my problem so... I have a new SSD (240 GB) because my old one was small, so I couldn't use it as a record of my work, so I use my HARD drive as she, but PS worked very slow sometimes. Now I wanted to change:

  

  And everything should be good, but this isn't, because PS does not see this disc in the box Active:
  

  And when I choose SSD with Ctrl + Alt keys, it does not, because some of my filters such as addition of textures cannotm work. only when I change the drive E is functional, but still slow...

  Any ideas how to solve this problem?

  (I tried reinstaling, reboot, change the order of the discs).

  Edit:
  In case if somone ask questions about "your system sees this drive:
  

  And my PS is install the SSD and all my other programs adobe as well.

  And just in case another screen:
  

  Hello you use Photoshop with all the Admin permissions?

  Terri

• Impossible to install Vista on Portege M400 - not compatible with ACPI

  Hello

  I have a toshiba portege m400.
  It has windows xp professional installed SP3 (the former owner he replaced with that of the xp tablet edition - I want to upgrade to vista so I can have the capabilities of the rear shelf!)

  In any case, I have a vista version - a version upgrade Home premium.
  When I try to install it it comes up with the error:

  +' This computer is not compliant with the Advanced Configuration and Power Interface (ACPI) standard. Windows must be installed on a computer that supports ACPI. Contact the manufacturer of your computer for an update of the BIOS, or install Windows on an ACPI compatible computer. " +

  When I try to boot from the cd it gets up to when I type in the product key, but then he tells me I have to run this from my current operating system.

  I tried to update the BIOS (it is currently 1.8 and I heard vista needs 2.0 at least). I tried to install the latest driver from the Web from Toshiba - BIOS version 3.2.8 site but it says "this computer is not supported" even if I went through the procedure of choice of type of my laptop and spec and the pilot came on his list.
  Now I'm pulling my hair out.

  Can someone help me please!
  Would be to get a full version of vista (not an upgrade version) work and boot from the cd because it seemed to go further like this?

  Thank you!

  Hi guys

  I think I know how you will be able to update the BIOS

  I read here in the forum that in very rare cases, you have the Toshiba preinstalled OS in order to update the BIOS
  So in my opinion, you will be able to update the BIOS if install you the operating system from the Toshiba recovery disc.
  After installation try to update the BIOS

  After the BIOS has been updated you could install the new Vista

  See you soon

• Portege M400 - no HARD drive not found during recovery "no found TMBR.

  Hello

  I am trying to reinstall my Toshiba Portege M400 146 provided with the original hard drive, but the recovery program will not accept that there is a record of hard work in the computer.

  I know the drive works as I have used on other computers to experiment with Windows 7, etc and in the computer Toshiba windows 7 (always on the HDD) will also begin to start, but planting them.

  The error message is that there is no record of hard work and the following text are in 2 command windows both with the title:

  X:\i386\systen32\cmd.exe

  * Error screen 1: *.

  Check the type of partition MBR
  Not FOUND: Partition ID 4 is 0x00 not 0 x 88
  Seeking the TMBR
  No found TMBR!
  Fact.

  Microsoft DiskPart version 5.2.3790.1830
  Copyright (C) 1999-2001 Microsoft Corporation.
  On computer: MININT-JUC

  Disk 0 is now the selected disk.

  Services of disk management cannot complete the operation.
  Specified drive does not exist.
  ERROR: E:\04386R01 Reco-unpacking. TPA has failed!
  Press a key to continue...

  Error screen 2:

  Manage the RAID configuration.
  # Mode GET1 F
  # Flags 0 x 00 0x00 0x00
  # Flag1 is 0x00 no 'F '!
  Get the current status of RAID...
  RAID level = compatible RAID
  Status: Optimal
  Get the number of readers...
  X:\I386\System32 > _

  I also tried with other drives and the same problem persists.

  Anyone seen the same problem and found a solution?

  Berst cordially

  Hello

  Eventually the partitions that appear on the HARD disk is corrupted.
  I couldn't install the OS on my laptop because the partitions have been confues up, I don t know why, but I couldn't format the HARD drive using the recovery disk.

  Finally, I took the Windows XP disc and formatted the whole HARD drive and deleted all partitions on the HARD drive. Then I installed Windows XP by using the Microsoft disk.
  After that, I made the recovery disc and installed the operating system using the Toshiba disc.
  Then, it was possible to reinstall the OS.

  Notes; The M400 seems supported RAID and therefore, you need to install the RAID driver first!