Portege M400: Port Replicator support DVI and analog monitor

Hello

I use my Toshiba M400 in the duplicator.
The duplicator has two outputs to a DVI and an external analog output display.

I would use both screens at the same time under Windows Vista RC1.
The port replicator manual mentions that this should be possible depending on the connected computer.

"According to the computer connected to the port replicator, you can connect external monitors to DVI port and the port external monitor and display on both screens at the same time."

Someone he knows the M400 which supports? I only get the external DVI monitor or at work.
(He used to work with my old others and this function was just great).

A big thank you in advance.

Rogier

Hello

I'm not sure but pretty sure you cannot connect two external displays at the same time due to the restriction of graphics card for laptop to 100%. You can stretch relative to your office for two screens (one internal and external) or have the same image on laptop LCD and external TFT connected DVI or RGB port.

If I read the sentence you have posted I realized you can use two ports (according to specifications) and use two screens on the same time screens (laptop screen and an external).

All available modes to switch the display to the external one, you can check with the combination of keys FN + F5 or in change of display tab tool mobile extension of Toshiba Service.

Tags: Toshiba

Similar Questions

  • Terca M4: How to activate the external ports, DVI and analog?

    Please can someone please tell how to activate the two external ports. I would use two DVI and analog to the office. Currently if you activate a second screen machine sets up the flat screen and the other the DVI external display. Is this in any way about this?

    See you soon

    Hi Matthew

    As far as I know you can connect an external monitor or a TFT. For this you can use the VGA (15-pin) port or DVI - D video, supported by PortReplicator III (PA3314E).

    Sorry, but I don't understand why you need the two holes at the same time. How many external screens that you want to use? Sorry if I'm missing something but perhaps you can explain your wishes more precisely.

    Good bye

  • Portege R700 and Win 7 Port Replicator Support

    Hello

    Just one running Windows 7 Pro 32 bit on a R700 and use speed duplicator Hi? Not a party PA3838D-1PRP.

    I read on a site of exercise there is no Windows 7 drivers for port replicator.

    Thank you

    As far as I know you don t need any special port replicator driver. If this port replicator is defined as compatible for your laptop model and that you use original Toshiba recovery image it will be recognized automatically and you will be able to use all the available ports on this port reflector.

  • Tecra M10 and Express Port Replicator, no DVI to Toshiba 20 "LCD output

    Hello

    As the bed of the subject line, I will put up a new Tecra M10 with the Express Port Replicator and monitor LCD Toshiba Tekbright 20 ".

    The system works on Windows XP, and the ordinary VGA connection on the port replicator works fine when connected to the external LCD.

    However, there seems to be no way to get the DVI interface on port replicator, working on the LCD.

    I tried to run this utility, and it does not detect the DVI monitor at all.
    http://www.entechtaiwan.com/util/moninfo.shtm

    I have updated graphics drivers Intel for XP, form the Web from Toshiba site and also have the latest version of the BIOS.

    Any ideas?

    Thank you very much
    Paul

    Hello paul

    Your Tecra M10 has DVI port?
    Replicator port is not some sort of converter and it will be just a loop through the signal directly from the laptop.
    If the computer laptop doesn t supports DVI output you cannot expect to get signal from the port replicator.

  • Portégé R600-102 - Port Replicator connection DVI on Slim 2 problem

    I'm setting up a work environment to double screen.

    I have connected my Toshiba Slim Port Replicator 2 (PA3603E-1PRP) to my monitor LG (M197WD) cable DVI - D single-link and Belkin (P35952ed) to another monitor via a standard VGA cable.

    Although the second monitor works fine, the display on the DVI connection turns off intermittently and returns after a few seconds.

    I am running Win XP on Toshiba Portege R600-102.

    Any ideas how to solve this problem?

    Elpadre

    Hello

    As far as I know that the TOSHIBA Mobile Extension software should be updated to the State.
    Real software version is 3.87.00.

    Go to the Toshiba European page and update this!
    Also, please make sure that the BIOS is up-to-date as well!

    The use of both VGA and DVI ports should be possible since the R600 are supported by this feature.

  • Re: Portege R600 - port replicator is compatible with regional products?

    Community of greetings from Toshiba,

    I need to buy laptops for several employees who are moving between the United States, the United Kingdom and the Middle East.
    The Portege R600 exist in all 3 markets, but each has a slightly different part number.

    The part number Replicator of compatible Port to the R600 is difference to the United Kingdom, the United States and the Middle East.
    Users would be able to dock their laptops in one of the 3 offices, because they travel extensively between each country.

    What's the Slim Port Replicator II (PA3603U-1PRP) and Slim Port Replicator III (PA3681E-1PRP) compatible with each of the products of the soil of Portege R600?

    United Kingdom Replicator of ports Slim Portege R600-11B (PPR61E-01G00CEN) III (PA3681E-1PRP)
    Middle East Replicator of ports Slim Portege R600-10 b (PPR61E-00F00MAR) 2 (PA3603E-1PRP)
    USA, Portege R600-S4201 PPR60U - 01700C Slim Port Replicator II (PA3603U-1PRP)

    Someone has an experience buy Toshiba products in the Middle East? Or needed to use Docking Stations in offices in several countries?

    Thanks in advance,
    Ted

    (I posted a similar request in the Forum we and receives no answer - http://laptopforums.toshiba.com/t5/Port%C3%A9g%C3%A9-Laptops/Port%C3%A9g%C3%A9-R600-US-UK-Middle-East/m-p/32060#M489)

    Post edited by: TedRNelson

    Hello

    I think that it shouldn't be a problem with the different Portege R600 in combination with the Slim Port Replicator 3.

    Portege R600-11b, R600-10 b belongs to the same series (PPR61E), that the R600 US belongs to the PPR60U, but this should t be a problem.

    As far as I know the different R600 from different regions are not really different (some belongs to the same series) as far as I know there could be a difference between some pre-installed applications and some modules as for example the card wireless network, but this should not affect the use of Slim Port Replicator 3.

    Cheers mate

  • Picking and Portege M400 displacement causes the crash and locking of the

    I have a new problem with Portege M400, which began a few days ago.

    If I pick it up or move it, then it will crash or lock up. I wonder if anyone has any idea as to what may be the cause of this and what can be done?
    My only guess is to replace the hard drive?

    Thank you
    Greg

    > Turn off accelerometer does not help. Internet research indicates that it is possible a motherboard problem. Replacement motherboard solves problems for about 6 months to a year, then it returns.

    I doubt that it could be a motherboard problem, what the gbaniseter say this happens when it pick up or move the m400, then it will crash or lock up.
    This seems to be a problem of HARD drive and it s nothing uncommon who, after a long period of use of the disk HARD start HARD drive malfunction is a sensitive device and can die because of the physical restraint
    Replace the HARD drive and check if the problem would happen!

  • How to disable WiFi for Portege R830 + Port Replicator & external keyboard

    Stupid question I know, but it's driving me crazy.

    I have an external keyboard Port duplicator and the attached monitor. The Port Replicator has a wired Ethernet connection to my local network. When I anchor my R830 in Port Replicator, ideally I would like to turn off the wireless adapter, but at least I certainly want the default use of the wired LAN connection not WiFi.

    Currently, it seems just randomly decide to use wired or wireless connection when I anchor.

    So, two part question:

    1. How can I pay the R830 automatically default to an Ethernet cable when I anchor?
    2. How can I turn off Wi - Fi when I am connected and using an external keyboard (the toggle F8 to activate wireless switch on the keyboard of the laptop does not work on external keyboards)

    Thank you very much in advance for your advice.

    > How can I set the R830 automatically default to a wired Ethernet connection when I anchor?
    If the port replicator is connected to the local network and then the laptop would use the LAN connection automatically if you connect the R830.

    > How can I turn off Wi - Fi when I am connected and using an external keyboard (the toggle F8 to activate wireless switch on the keyboard of the laptop does not work on external keyboards)
    Well, in this case, you can use the internal keyboard to turn off the WiFi using Fn + F8

  • Portege 3440CT Port Replicator

    I have reistalled the OS (Windows 2000)
    using drivers from the Toshiba site.
    As far as I know, everything works fine
    except the Network Port Replicator.
    I can't have the PC to find the
    Ethernet card and audio output
    Since the Replicator does not work either.
    Any drivers?

    How can I activate the network card?

    Grateful for the advice, Fredrik

    Hello

    I found some drivers for your device. Please visit this site:
    http://EU.computers.Toshiba-Europe.com
    In my opinion, you need the driver Lan (V4.1.65.0) and the audio driver (V5.12.01.2123)
    As far as I know you don t have enable the network adapter.
    If you you just need to install this driver.

    Good bye

  • Tecra A2: Question about DVI and external monitor

    Hello
    I am trying to get a DVI Signal of the Tecra A2 using the Advanced Port Replicator III but without success. The A2 does support DVI anyway?
    Another question: is it possible to set up the main display to the external monitor using "extended Desktop"?

    Thank you
    Ralph Menon

    Hello Ralph

    Your unit doesn t support DVI port and you can't use it. As far as I know just the ports that you can find on the device, you can use in Port Replicator because the signal is just loop through.

    The problem with the screen is that mobile has the main value and it cannot be changed (on my Tecra M1 nor). The windows will be implemented on an external but password box will always be displayed on the screen of the laptop.

    Good bye

  • The PA3508E-1PRP Port Replicator supports wide screen resolutions?

    Hi all

    I think to buy a Tecra M9 - 14 FT 7800 (with the NVIDIA Quadro NVS 130 M - 128 MB graphics card) - will, in combination with the Replicator to ports Express PA3508E-1PRP let me fully to use an external monitor with a resolution widescreen native 1680 x 1050 over DVI?

    Thanks in advance,

    Ben.

    Hello Ben

    Unfortunately I can't give you the exact answer, but I'm a bit skeptical about it. As much as I know Port Replicatior has no influence on the signal because the signal from the laptop will just looped through. The question is what resolutions on external screen will be supported by the graphics card for s laptop.

    IN the document s user Tecra M9 manuals I found track information: as the operation of the port of all monitors DVI (Digital Video Interface) could not be confirmed, some matte DVI monitors will not work correctly.

    In any case, as far as I know as Tecra M9 comes with Intel 965 GM graphics card and we're working on how to get the resolution widescreen 1680 x 1050 on external display.

    If you need help with this please write again.

    Good bye

  • Portege M400 than all the drivers and the necessary XP Recovery

    Hi people,

    I just bought a Toshiba Portege M 400 without software.
    Any package of all frivers you need is available?

    I tried to get all the drivers of several necessary, but installing caused my system to collapse.
    Thus, Toshiba does not provide a complete software package of /driver for its laptops?

    Kind regards
    Matthias

    Hello

    Toshiba offer recovery discs for the series of laptops that is not too old.
    If you want you can check it out here:
    https://backupmedia.Toshiba.EU/landing.aspx

    If the recovery disk is not available, then you will need to use the drivers from Toshiba Europe page:
    http://EU.computers.Toshiba-Europe.com/

  • Portege M400 - upgrade HARD drive protection and vibration

    I think the upgrade from 80 GB to 500 GB HARD drive, but I was wondering how this affects the protection against vibration - I should get a player that has not integrated it and the new disc will have the same protection against vibrations the original - that is I presume the protection mechanism is outside the drive and just parks the drive head when it detects a movement.

    ... actually looks that most have detection of shock, I'll go with a Toshiba drive because it stresses peace.

    Hey Buddy!

    Hmm... First of all I'm not sure if a 500 GB will work in your laptop if only 80 GB HARD drive is installed. I m also asks that you need as much disk space in a laptop. For example, 160 or 250 GB is enough for me because I store most of my data on s to external HARD disk or DVD.
    Let me give you a little advice: in this case I'm going to my local computer store and talk with the seller which HARD disk, it can recommend. After that, I was able to test the HARD drive in a computer store and, for example, it doesn't work, you can buy a new one. Who is really nice and it should be possible in most computer stores. ;)

    Regarding your question of vibration and shock protection, I think that a new drive HARD doesn't affect this feature because they don t have such a feature built-in so it makes no difference what HARD drive you buy.

    Good luck!

  • HP ENVY 5830 HDMI / DVI and external monitor not detected

    I have a HP Envy 15 with the ATI 5830.  I want to connect an external monitor.  The outside is a Samsung SyncMaster P2770HD and has a DVI (also has HDMI, but poor quality when used from a PC). My laptop has only HDMI.  When I use a DVI - D HDMI converter / my laptop does not detect that there is an external monitor.  I've lived all my settings and updated the Bios and video drivers.  I'm missing something. Appreciate any help.

    Hmmm... Looks as HDMI / DVI - D adapter for me, like the HDMI port problem works well insulated... I don't remember any problems, I've heard of HDMI to DVI - D and untimely on Envy 15...

  • Tecra A10 - 1GV and Docking Stations: Dynadock vs Express Port Replicator II

    Hello Forum;

    Official Toshiba site proposes to use the Docking Station Express Port Replicator II for laptop A10 1GV.

    I need for my construction work 2 monitors.

    My question: can I use with the Express Port Replicator II two additional monitors at the same time (there are 2 connectors (DVI and analog VGA/RGB). Is it possible to create two different images in this way?
    Some have said, that after a connection with the DVI - D VGA connector is turned off.

    Someone at - he experiences?

    On the other hand Toshiba offeres the Docking-station "Port replicator USB Dynadock U" -.
    This docking station is only connected via USB with the laptop. According to the data sheet - it provides an analog and a digital monitor with different views at the same time, up to 1920 x 1200 pix., extra headphones and 6 x USB 2.0. more network connection

    This official docking station works with all USB-connect computers, but in the compatibility list does not mention the Terca A10 and gives only a declaration of compatibility for the series Toshiba NB200 from Toshiba.

    Someone out there experimenting with this docking station?

    What would be the best way to work with two monitors + the computer screen?

    Thanks for all the good advice.

    Michael

    Hello

    As much as I know Express Port Replicator supports the simultaneous use of RGB & DVI only if the laptop itself also supports the simultaneous use of RGB & DVI.
    So if the Tecra A10 1GV would support the use of RGB and DVI port simultaneously then Express Port Replicator should support too.

    The Port USB Dynadock Port Replicator support VGA or DVI port. I didn't find the Dynadock, which was equipped with two ports together.
    The Dynadock can be connected to all computers with USB 2.0 and it beautiful s expansion.

Maybe you are looking for

  • What IS BEST VERSION OF FIREFOX to VISTA 64-BIT OS?

    I have a Dell laptop which come to install a 64 bit Vista OS and want to use Firefox as my default browser.I WOULD LIKE SOMEONES SUGGESTION FOR THE BEST VERSION TO USE. Thank you.

  • Hovering over FF bookmark shows incorrect link (bunk)

    The mouse hovering on bookmark link in the sidebar (20.0.1 FF) presents information about bookmark 1 above

  • What is with 41% of the memory?

    My Macbook pro has 16 GB of RAM (memory). So why is it showing 41% (6.56 GB) RAM usage when Apps only I opened are Safari and "Finder"?

  • Equium A110-252 manual repair

    Hello I have an Equium a110-252 and need to disassemble to replace the cpu which is defective. I am competent and want to do it myself, is there a MANUAL that guides you through the process of disssembling, this laptop. I hope someone can help. Doug

  • Virus hiding like an update?

    It keeps give me links «support pages» official website of microsofts, yet say he said pages were made/edited the same day I visited. http://support.Microsoft.com/?kbid=890830 It is one of the links that's for me, and the date it was 'reviewed conten