Portege M400 than all the drivers and the necessary XP Recovery
Hi people,
I just bought a Toshiba Portege M 400 without software.
Any package of all frivers you need is available?
I tried to get all the drivers of several necessary, but installing caused my system to collapse.
Thus, Toshiba does not provide a complete software package of /driver for its laptops?
Kind regards
Matthias
Hello
Toshiba offer recovery discs for the series of laptops that is not too old.
If you want you can check it out here:
https://backupmedia.Toshiba.EU/landing.aspx
If the recovery disk is not available, then you will need to use the drivers from Toshiba Europe page:
http://EU.computers.Toshiba-Europe.com/
Tags: Toshiba
Similar Questions
-
Original title: DLA is compatible with Internet Explorer 8 on xp home?
I would like to be able to use my CD rw as big floopys IE selectively erase some files rather than all the files. I understand this formatting the disc for DLA (not sure if DLA means the implementation of formatting for software-3 rd party packet writing?) requires 3rd party software because ms windows xp with ie8 does not an own ms-ready download solution?
If someone can answer to the following:
1 is it possible with xp family? IE 8, 32 bits?
2. Please direct me to an audit of Microsoft which is coherent and farily luck here requirements.
3. If you know a 3rd party (prefer the download from microsoft) which provides a 100% free download and can be checked for virus using mse for selective file errasing?
I don't expect any outcome of this post because I have nerver (2 positions) has received a response from writen except a few ms technology that pointed me a well known ms response that I had already read and what he recvd. take a vote.
YOU
Bob
Hello
Microsoft doesn't recommend or suggest any third-party software. Please use your favorite search engine to look for third-party software selectively erase some files.
THIRD WARNING:
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk. -
Pavilion 15 r033tx: all the necessary drivers for windows 7 ultimate r033tx
HIII
Recently, I installed windows7 ultimate portable computer on.my
I hope someone could help me out with all the necessary drivers to download n install them
Thank you!!Hello:
Here's the W7 x 64 support for your model page.
I see wireless and bluetooth drivers are listed.
Here are the drivers for the wireless and bluetooth.
http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_147188_1
http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_147890_1
-
When I try to update to Firefox, I get a window saying that it cannot be loaded because I don't have all the necessary permissions. What do this mean and what do I do?
If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.
Download a new copy of the Firefox program and save the file on the desktop DMG
- Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
- Trash the present application Firefox to do a clean (re-) install
- Install the new version you downloaded
Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.
-
Picking and Portege M400 displacement causes the crash and locking of the
I have a new problem with Portege M400, which began a few days ago.
If I pick it up or move it, then it will crash or lock up. I wonder if anyone has any idea as to what may be the cause of this and what can be done?
My only guess is to replace the hard drive?Thank you
Greg> Turn off accelerometer does not help. Internet research indicates that it is possible a motherboard problem. Replacement motherboard solves problems for about 6 months to a year, then it returns.
I doubt that it could be a motherboard problem, what the gbaniseter say this happens when it pick up or move the m400, then it will crash or lock up.
This seems to be a problem of HARD drive and it s nothing uncommon who, after a long period of use of the disk HARD start HARD drive malfunction is a sensitive device and can die because of the physical restraint
Replace the HARD drive and check if the problem would happen! -
Portege M400-103 powers - the automatically every morning at 09:00
My Toshiba Portege M400 powers - the automatically every morning at 09:00. All auto market options are disabled and also my version of BIOS is upgraded to the latest version 3.20. It is very embarrassing for me because at 09:00 I'm in my car, and my laptop is in my bag. When I get to the desktop from the laptop is very hot.
Any ideas what could be the problem?
Thank you!
/ Vassil
Hello
I hope that your laptop is not in tablet mode, because if the laptop into hibernation in tablet mode and when you accidentally stick the buttons under the screen of the laptop can be awakened from hibernation mode.
-
Portege M400: cannot copy the files on the disk HARD - can't see any of my files in Word
I bought the M400 a few weeks ago. There are a number of problems. Adobe reader gives "an internal error has occurred", manual installation of download gives "error occurred in the file zip", download or copy of the files on the hard disk gives error "there is no space" when there are only 8 gig used from 60 GB. Now, I don't see any of my files in Word.
I can also copy the files from the cd or DVD. I'm in canada mississauga on Horus, usually resident in the United Kingdom, so I'm in a precarious situation because I can't in my office to sort out the issues.
Can someone advise me please why all these problems are happening, do I have to use the recovery disk? Baz
> Forgive me but how to put the hard drive in business.
I think that the Johnny means that you connect the HARD drive to another computer using the external USB HDD controller. These external USB HDD cases can be purchase in every store of the computer.
However, if you n t need data that are placed on the HARD drive, you could simply start installing the OS from the recovery CD. This will format the whole HARD drive and install the new operating system as well as all the drivers, utilities and software further.
-
Portege M400 connected to the WiFi router, but not the navigation of Web pages
Hello
I use M400 laptop computer series that I bought in 2005 and do not know if the guarantee was already finsihed, although I paid extra for an extended warranty.
You should check a second time.My wireless connection was working fine with my conection DSL broadband 2 years ago, I was using router Netgear wireless. In the last 2 years that I did not use wirless conection, recently I bought Thomson TG585 router to my ADSL connection wireless broadband. This wireless router works fine with my other Mac desktop computer but my laptop is not browse a Web page if it says connected with WiFi router.
I went through all the settings and even I have discussed this question with the technical team bradband and say there is problem with my computer laptop bcz Mac Desktop works fine.
I checked in the wireless troubleshooting setting and still not able to solve this problem.
I use KesperKey Internet Security and I tried to turn it off for the test connection wireless but always face same problem.I wonder if anyone can help me?
Thank you.
Hello
Disable all the security settings on your router and then try to connect the M400 protected wireless.
If you will be able to connect to the WLan and will be able to navigate a few s webpage you could activate step by step all the security settings such as encryption of WLan, Mac address filtering, SSID hidden, etc.By the way; Have you tried to update the driver WLan?
-
my name is zaza kilani
I have been registered since October 15, 2007
I have a unique id, and I know it. I don't know if I should provide here
my replacement e mail * address email is removed from the privacy *.
I know the answer to the secret question and I have all the information I've provided coz I copy and paste into a file
I wrote on the forum and I can't retrieve my password
Hello
E-mail account which you are referring?
If you are referring to Hotmail account, then please contact the windows live support team.
http://windowslivehelp.com/ -
Portege M400: install iPod ask drivers
When I install the new hardware Installation Wizard iPod arrives and ask a pilot. As the iPod is a USB device, it doesn't have a specific driver. Apple make sure it is a problem specific to this computer - a portege M400.
Any suggestions? Anyone had this problem before?
Hello
This isn't 100% true. Many USB devices external need to install the driver before the race.
But you deliver. I recommend that you install all the available Microsoft patches and install or update the Intel chipset utility!
-
remove all the HARD drive recovery partition incl. disk partitions
IM in the process of upgrading to vista 32-bit Ultimate edition - a Lenovo T61 laptop OS original vista home, comes with HARD 160 GB but only show 110 GB disk.
There is the hidden for drive recovery partition. now, I've wanted this disk recovery partition removed for more space for important files of video editing.How can I remove this parition hidden containing the recovery disk?
I bought the support for laptop recovery CD - I have no need of the hidden partition.
in the process, I deleted the existing partition (not the hiiden recovery partition) and installed vista ultimate 32 and it lights without problem. I then installed
the INF chipset utilitty downloaded from the Lenovo Web site, and then installed some drivers downloaded - and all in perfect condition smooth running.now, I decided to remove that hidden partition containing the disk recovery - whatever happens after that, I have the recovery CD.
How to remove this hidden partition? TIA
The link above is General info re remove hidden restore partitions.
"In some OEM system, such as IBM/Lenovo, is impossible to remove from Windows."
This link below might be more to the point for you:
http://Forum.NotebookReview.com/showthread.php?p=2367169
Written by:
Computer notebook evangelistJoin Date: March 2007Messages: 437Reputation power: 7"" "This applies only to Windows Vista.
* Make sure that you have backed up your OEM code before deleting the Rugged hidden
The hidden restore Partition Lenovo is a protected partition, then you will not be able to remove it through disk management as you would with any other normal partition. You can use Diskpart. You can still use these steps to remove the hidden restore partition if you have already done a clean install, but you will need a 3rd party software to combine with the main partition. It is better if you remove the first hidden restore Partition, then cross with a clean install using one of the many guides available on this forum.
Step 1.
Burn recovery media. Type "Recovery media" (without the quotes) in the search in the Start Menu. Open the application and follow the instructions.Step 2.
Open the application by typing Diskpart either 'Diskpart' (without the quotes) in the search, or type "Diskpart.exe" in run by pressing Windows key + R.Step 3.
Now with open Diskpart, you must enter the following command lines:I. type "list disk" without the quotes and press ENTER.
II. Type in "select disk 0" and press ENTER.
III. then type in "list partition" and press ENTER.
IV. then type in 'select partition x' x = the recovery partition you want to delete (I think it's 1, I do not remember) replace x with the number of recovery partition and press to enter.
V. finally type in "delete partition override" and press ENTER.
That should do the trick. Good luck!
Delete Hidden Partition Lenovo's of recovery on Vista using Diskpart Guide.
Of orev Vista Clean install and RAM Memtest module test Guides.
The Lenovo wallpapers 1680 x 1050factory-installed.WARNING:
Grain of salt applies in my view.See you soon. Mick Murphy - Microsoft partner
-
Recently, I did a clean install of Windows 7 Ultimate. Everything has been removed from pilots to programs. I also removed a Windows.old folder to save space for now, I use an SSD (Samsung 830 Series).
My laptop is a Toshiba Satellite A665-3DV12X.There is no problem when I cloned comes from my HARD drive, I wanted just a clean install because it was too messy.I have installed all the drivers that I have possibly required:64bit_Vista - Realtek app downloaded from realtek.comTC00149402A - Toshiba Eco Utilitytc20091500a - Toshiba value added package (PVAT)TC10106100A - Toshiba Service StationTC30463200A - Toshiba Web Camera Applicationtc30263200a - utility to sleep Toshibatc40134700f - Toshiba Flash Cards Support utilitytc40139200g - driver Audio Realtektc40141700b - NVIDIA HD Audio Drivertc40142500c - Toshiba HW Setup Utilitytc40144900d - driver Audio Realtektc40145700a - Synaptics Touchpad Drivertc40149000a - Jmicron card readerVista_Win7 - drivers from realtek.comtc40147400b - RealTek LAN Drivertc40116700f - Realtek Wireless LAN Drivertc00346200d - Atheros Wireless LAN Drivertc40141200i - USB 3.0 driverSynaptics of Synaptics v16.2.21 - update driver from sitetc00245700e - HDMI Control Managerf6flpy - x 64 - frame of TSRI v11.2NVIDIA drivers updated to 310,70EPD/scannow found no integrity issues,No prompt saying windows search indexing is defective or not (because they are on).When I'm in the folder, the files are accessible but the icons and thumbnails disappear.Here are the links of what's happened to my computer.http://Flic.KR/p/dJhoGRhttp://Flic.KR/p/dJnQz1Hello
Thanks for posting the question in the Microsoft Community!
Libraries are unresponsive.
Some third-party programs may cause the problem.
To work with the issue, I suggest you follow the steps:
Method 1: Clean boot
When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.
See the mentioned site:
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.
Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).
Method 2: Check the hard disk for errors
Check a drive for errors
http://Windows.Microsoft.com/en-in/Windows7/check-a-drive-for-errors
Note: When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.
I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.
-
I have to reinstall all my applications and drivers when I update to Windows XP to Windows 7?
When you upgrade Windows XP to Windows 7, a lot of drivers is upgraded as part of the process and your applications and settings must be migrated automatically. If you perform a new installation, you may need to find the drivers for your PC that are compatible with Windows 7 (or, if no driver is specifically available for Windows 7, use Windows Vista counterparts).
You can also use Windows Easy Transfer to move your documents, photos, music and other files if you decide to perform a new installation. For more information about Windows Easy Transfer, please visit http://windows.microsoft.com/en-us/windows7/products/features/windows-easy-transfer.
Hope that helps, have a nice day! Kristan M. Kenney ("Nighthawk64")
-
Reinstall XP on Portege R600 - what are the necessary drivers?
Hello
I am plan to reinstall windows, since something (a driver/program/idontknowwhat) seem to access my hard drive at random times (often), which means that ever, it stops turning and still makes noise. It was already the case (but a little less than now) with preinstalled system, even with wdfrgmgr.exe disabled and without using a swap file on the hard drive, so since I don't know what are the causes (is - anyone here know?) and since it seems impossible to upgrade to an SSD, I'll just install a clean winXP install only necessary basic stuff (especially not all control panels).
I would like to know what drivers from the Web site are essential and those that are not.
I'll definitely install base drivers common Module, driver Display Driver LAN, HDD Protection Utility, Power Saver, his Driver, Touch Pad Driver, Webcam Driver, Wireless LAN Driver (Intel).
I will not install (but maintaining install files on my disc for emergencies) acoustic silencer, Assist, Bluetooth Monitor, controls, cooling running Diagnostic tool, DVD player, Management Console, password, PC, PC monitor diagnostic, tool utility utility boot memory SD SD utilities, security help, SSD Alert, power utility Touchpad utility , USB Sleep & charge utility, utility zoom. I'm missing something essential (and obviously not in name) by installing is not it?* Now my other question: which with other drivers? I don't know what they are doing here is so my doubts since the following drivers: *.
(1) pilot 3 G and 3 G RF power control utility: is this necessary if I never use it, or do not install the power utility will lose power (thus reducing my battery life?)
(2) Intel Active Management Technology and Intel Matrix Storage Manager: is it necessary that the machine works correctly? I can't find the right information anywhere.
(3) chipset utility: I am surprised it is not called driver... it is some control panel I don't need or is it actually a driver?
(4) ConfigFree, hotkey wireless and Wireless Manager: my wireless internet will work without it?
(5) display device Exchange & Hotkey utilities for display devices: these do what exactly?
(6) microphone effect: is it only the echo canceller or also a necessary micro driver?
(7) mobile Extension: what is it exactly?
(8) trusted Platform Module: is it necessary to install this if I am not using any other explicitly related function?
(9) public services: this product contains all I need to install the drivers? Or is it just a bunch of utilities like his name?
Thanks in advance!
Peter(1) you have not need drivers 3 G, if you do not use 3 G
(2) Yes, you need to install these devices from Intel, they are important.
(3) the Chipset driver is probably the most important of all drivers. Toshiba common modules is also very important. You must install these two before anything else.
(4) Yes, we must still work. You can install the keyboard shortcut, so you can enable or disable Wifi on and outside
(5) you need to install these, they support some features of the Fn key, so you can use an external monitor, etc...
(6) I don't think that you will need. If you encounter problems with microphone, install
(7) install the Mobile Extensions if you have a Port Replicator.
(8) If you do not use the TPM encryption, simply disable it in the BIOS
(9) you must install the utilities, so you can change the hardware settings within Windows.
-
x220t after shoutdown than all the indicators get lit!
I have Lenovo x220t after shouting down of all indicators to stay on (supply status indicates the day before (green), indicator of battery
yellow. and indicators of Wlan and Bluetooth (green) on. The lights flash every few seconds) than a HARD drive activity off! Now
If I plug the power cord only on battery indicator (green) and unplug the indicator lights are once again.It's normal! If this is not the case, what is the problem and how to solve?
I can confirm that it turned off the battery status light when charging.
In any case, it seems that the upgrade of BIOS v1.16 since v1.12 solved problem of this thread.
-ngm
Maybe you are looking for
-
How can I choose to block specific Web sites and all pages under this address?
I want to be able to choose a Web site and say "block this address. If someone tries to access this address or any page below, reject them. "Is there a way to do this?
-
I think it's clear above
-
QuickTime Player 7.7.9 for Windows failed to initialize error 2096
I tried to open QuickTime Player 7.7.9 in Windows 7 Home Premium SP1 with the latest updates for February 2016 and a pop-up message with the message of: QuickTime failed to initialize error 2096. There was also something to check that the application
-
Hi all I'm having some trouble with the NI PCI-6733 device and I have a few questions about this. 1. What is the resistance of exit? 2. can I change the output resistance? 3. If I change the output resistance, can be infinite? Thank you
-
Clear XY graph between iterations data
Hello I'm going to erase the graph XY data each iteration of the loop, but "reset default" invoke node does not work. Are there other options to erase data?