Portege M400 unable to find the new 320 GB HARD drive

Similar Questions

• After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

  After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

  Hi TedWie,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this solves the problem.

• PC crashed - installation on the new PC or HARD drive

  My PC with one of my installed CC Suite licenses seems to be dead. I am assessing whether I need a new PC or a new HARD drive is internal.

  I have an installation on a Mac (that I want to keep), but I was wondering if I can just download "installing PC" on the new PC or HARD drive and allow with my CC Identifiez_ you?

  Will I need to "deauthorise' previous installation?

  I can not access the software CC deauthorise it manually from the dead PC and wonder if I try to reinstall on a new machine, if the system will say just that I'm over my limit of license because I have not already deauthorised installation?

  Thank you very much

  Yes. You can activate the application Adobe CC on 2 machines.

  Please see licenses and terms of use | Adobe

• I want to create a Web site where people can choose a date and time and click on search, and it will find the photo of my HARD drive and show them on the page, is that poosible? If so could somone tell me how I will pay?

  I want to create a Web site where people can choose a date and time and click on search, and it will find the photo of my HARD drive and show them on the page, is that poosible? If so could somone tell me how I will pay?

  On your local HARD drive? N ° on your web server? Course

  How do you know php? There are exif function that can read EXIF headers on your images. You can use it in conjunction with the functions of file system scanning of the images on your web server. If you have thousands of images, you want to index the results in a database rather than search the real-time file system.

• Satellite 2410 won't see the new 250 GB hard drive

  I am trying to upgrade the Toshiba 30 GB hard drive that came with the unit to a Western Digital Scorpio Blue 250 GB EIDE drive.
  I get out the swap the 30 GB to 250 GB put in a bootable XP SP3 CD version and nothing - no sign that power came to training.
  The CDROM is trying to write files on the hard disk, but nothing happens.

  Same thing happens when I try to use the pack of 3 CD of Toshiba or the Norton Ghost recovery CD.
  The computer does not see the drive. Put the old 30 GB drive and it starts right now.

  My BIOS settings show set up for EIDE and boot from the CDROM. What I'm missing?

  Hello

  It seems that the BIOS does not recognize the new HARD drive, I suppose that it s too big
  Satellite 2410 series is old and I guess that it will not support larger 120 GB HARD drive because of the 28-bit LBA s

  So try with the smallest HARD drive like 80 or 100 GB.

  Greetings

• Portege M400 - where to find the touch screen XP driver

  Hello, I was wondering where I could find the touch screen for my Portege M400-S5032 pilots.
  I looked on the site Toshiba driver but could not find them.

  Thanks in advance for your help,
  Carbira1

  Hi mate

  Take a look at the Toshiba driver page we
  [Drivers Portege M400-S5032 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1598633& rpn = PPM40U & modelFilter = M400-S5032 & SelCategorie = 2756709 & selFamily = 1073768662]

  There you should find the Wacom Dual Touch driver for Windows Vista/XP
  I think it's a good thing.

• Portege M400 - where to find the Bios 3.80 changelog

  Hello

  is there a place where I can find the changelog of the version of the bios 1.80 to 3.80? should I upgrade?
  -do you have any experience by changing the fan? mine makes sounds that belong not here...
  -How long in your experience can take to get a response from toshiba support by e-mail? IM waiting 3 days now... :(

  Thank you

  Hello!

  I can t find a log of the changes on the Toshiba site also but why do you want to upgrade the BIOS? In my opinion a BIOS update should only be done if you have problems with your laptop or something else.
  Never touch a running system! ;)

  Before you exchange the fan you need to clean using a jet of compressed air. This could blow the dust from the cooling fans, and you should do from time to time.

  Good bye

• Palm TX is unable to find the new router

  At my TX consecutive years on my Netgear router with aol. A week ago I changed to Virgin Media, which provided me with a new Netgear modem/router "n".

  My laptop picked up right away and is all set up. My Palm not cannot see it at all. I understand now that the previous netgear router was a 'g '. Can I do anything to get my TX to recognize the new router?

  I am answering my own post here. Fiddled about and found the solution. Necessary to change the mode of hub to a lower value, so my TX could identify and now everything is ok.

• Satellite A100 - 237 (PSAA9E) - can I improve it with a new 320 GB HARD drive?

  Hello!

  I want to switch the hard disk of my Satellite A100-237. It is equipped with 80 GB Fujitsu, 5200 rpm, SATA. I want to install a new one - 320 GB, 7200 rpm, SATA. But I don't know is it supported.

  I tried to find information about the possibilities for this upgrade, I could not find anything.

  Thank you in advance!

  > I want to upgrade the hard drive of my Satellite A100-237. It is equipped with 80 GB Fujitsu, 5200 rpm, SATA. I want to install a new one - 320 GB, 7200 rpm, SATA. But I don't know is it supported

  Don't worry, buddy... I don't see any serious reason why would be supported not the 320 GB SATA HARD drive.
  The SATA controller must handle the tough without major problems.

  It is important that you use a HARD SATA 2.5 ". The size and speed of the HARD drive should not affect compatibility.

  See you soon

• 3110CT: BIOS recognizes the new 20 GB HARD drive

  Just installed a P002608, in a protected 3110CT 20 GB hard drive, now, the BIOS will not recogize the new hard drive.

  Hello

  I think that you will not be able to use this 20 GB HARD drive on this good old classic.
  It seems there is a BIOS limitation and this big HDD will usually not recognized by the BIOS.

  Remember that the Portege 3110 (P311E) has been delivered with a 6 GB HARD drive!
  There is a huge difference between the 20 GB and 6 GB of HARD drive!

  In my opinion you should try other drives that support a smaller size

• Windows 7 does not recognize the new WD external hard drive added to the usb port

  Recently, I tried to add my third USB WD hard drive to my computer.  It's a My Book Essential.  The meter turns and the virtual cd drive is listed in WD, but the hard drive itself does not appear on the list of devices with a drive letter.  My my first two books are readers: J:, and L: I have no "new device found" message   I search for new devices and it the PC do not find anything.  If I click on the virtual CD drive (M :) it askes if I want the computer to allow WD to make changes...) I say Yes and the screen flashes and nothing happens.
  The drive be defective?  Any other ideas?

  Hello

  Have you tried to connect the external hard drive on another USB port?

  Try to connect the WD external hard drive on another computer.

  Follow these steps:

  Method 1: You can run the troubleshooter in the following article and see if this fits the Bill.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also, run the Fixit.
  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Check if the external hard drive is recognized in disk management and assign a drive letter to the same.

  To open disk management, follow these steps:

  a. click Start, type disk management in the start search box and press enter.

  (b) if the drive is detected in disk management, I suggest you to assign a drive letter and see if that does the trick.

  For instructions, see this article change, add, or remove a drive letter

• HP Notebook: the new laptop HP hard drive partitions

  In my previous PC, I split the drive into 2 partitions: 1 for the OS and the other for my data, so that I can made the recovery of the operating system without losing my data. Do the same thing on my HP laptop? How can I do? And, if I managed to create 2 partitions of the hard drive (1 TB), 1 for the operating system (windows 10 Home) and the other for my files and data, I'll be able to recover the operating system? Sorry for the bad English and I thank you.

  aaff00

  Hello;
  
  Let me welcome you on the HP forums!
  
  When you look at the player on this new laptop, you will see that there is already several partitions on it - because it is very probably in the GPT format, not the MBR formatting you are used to.

  That said, you could reduce the OS partition to add a partition of data, as you did in the past.

  You must use a tool of partitioning for this, which one is this: Best Free Partition Manager for Windows | MiniTool Partition free

  As for power, then later use the HP Recovery Manager - probably not.  While it might work, one of the first things that is completely reformat the hard drive and will erase everything you have saved on this subject - and it will reformat the drive to match the original settings in the process.

  Good luck

• Question about password on the new Satellite A105 HARD drive

  I am the owner of a Satellite A105 and the hard drive was failing. I got a new hard drive but before I gave up on the current one I decided to wipe it clean and a few tools to see if it was a way to recover.

  Well, when wiping clean it restarts and then he showed me a message saying "password type of HARD drive internal" or something similar. I do not know the password so I can't use the hard disk more (or is there a way to reset the password?), but before you install the new hard drive I want to know if there could be a problem installing the new hard drive in the laptop without knowing the previous password.

  I mean, it locks the new hard drive or is it completely independent of the installed hard drive? The one I have is brand new, and I want to know if I plug it in and from the laptop are all I have to do?

  Hello

  If the HARD drive password has been activated and you don t usually know this password then the HARD drive is locked and can no longer be used.
  It s simply not accessible and it s not possible to remove this password.

  > I want to know if there could be a problem installing the new hard drive in the laptop without knowing the previous password. I mean, it locks the new hard drive or is it completely independent of the installed hard drive?
  I think that he should t be any problem with a new HARD drive.
  As I said the password is stored in the sector specials on the HARD drive. The old password should not exist on the new HARD drive (if the password has not been set).

  Best regards

• 4540 proBook s: help to the New Installation of hard drive recovery

  I had a bad hard drive crash. I installed a new and got the bios to boot from the cd drive, with windows 7

  orginal cd of installation in the drive.  He acknowledged drive 0, I clicked again in the options. He created a system partition.

  Installed windows 7 apparently very well. Inserted the recovery driver and application and installed disk. Everything seemed fine. This morning I turned it on and it the hard drive error (3F0) Please install an operating system. I shut it down and restarted, it seemed normal.  I installed a few programs, stop it again. Returned by, it starts again and it took me to screen diagnosis saying SMART Check - not installed and short DST - not installed...  Can someone tell me how to remove that partition and I can format the drive in a usb sata enclosure and try again.

  Please tell me the correct procedure to return this laptop running to a factory State. I have the original Windows7 and Windows8, Driver and Application for the two OS disks ' are...  I want to stay with the installation Windows7.

  Thanks for any help on this problem. I have no idea where I was wrong!

  It is not impossible that the new disk is bad, have seen before. It is also possible that the controller sata on the motherboard is bad, but I'd watch this last possibility. You can get an Exchange on the new hard drive?

• Image portable HARD drive for transfer to the new computer portable HARD drive on the same laptop

  Location:

  Laptop was to receive the new HARD drive more big;

  Configuration is complex and has a lot of data and SW engineering.

  Own re - install would take too long.

  In operating systems earlier I just created an image, installed the new HARD disk and restored the image.

  In Vista, it does not. New HARD drive with image does not start. (Partition is correctly selected as active)

  Tried other methods, including Robocopy but without success.

  Sysprep is the right solution? If so, how will this affect users profiles and installed applications?

  Thank you

  Paraxis

  Hi Paraxis,

  Whenever we use the system image and restore from it, the hardware must be same, as has already been made to backup. The hard disk partition should also be in the same size.

  You can use Sysprep on your computer and check if that helps you solve the problem.

  Preparation system (Sysprep) tool is a technology that you can use with other deployment tools to install Windows on new hardware, operating systems. The Sysprep tool prepares a computer for imaging of disc or delivery to a customer of the configuration of the computer to create a new computer security identifier (SID) when the computer is restarted. In addition, the Sysprep tool cleans up user-specific and settings specific to the computer and the data that should not be copied to a destination computer.

  Access the links below for more information on Sysprep.

  http://TechNet.Microsoft.com/en-us/library/cc721940 (WS.10) .aspx

  http://TechNet.Microsoft.com/en-us/library/cc766514 (WS.10) .aspx

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.