Portege M400 - utillity rotation screen problem

Similar Questions

• Portege M400 is frozen, screen goes black and the fan speed increases when moved

  Can someone help me please?

  I recently received the Portege M400 from a friend 4 days ago and reformatted for Windows XP Tablet Edition.
  Everything's fine until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically.
  So far I have had no success in the resolution of this problem and I really appreciated, is that someone could help me!

  Have you installed the OS using a Toshiba recovery media or you have installed the version of the OS?

• Portege M400-146: Rotation of the screen after disconnecting

  Does anyone noticed a problem where, after disconnection and switch to Tablet mode, the screen rotation button doesn't seem to work correctly?

  What do you mean with doesn't seem to work correctly?
  What happens when you use this button after disconnection and switch to Tablet mode?

• Portege M750/10J - touch screen problem

  All,

  I have the Tablet above and the touch screen works intermittently,

  The used stylus is that magnetic with the right click feature

  Someone at - it met similar problems?

  Kind regards

  Have you installed the latest version of the BIOS?

  If the latest BIOS does not help, there may be a loose connection, or the system needs an update. An ASP can do for you.

• Portege M400: Cannot retrieve screen cut-off

  Sometimes after the screen time-out turned off I can not retrieve the situation, which occurs more frequently in tablet mode. Any key / button I press on the screen does not recover, but I can see the disk activity light that the camera seems to function normally. The only resolution at this point that I found is a reset of power coercive.

  Someone at - it suggestions?

  It of not easy to say what's wrong or why it occurs.
  To me, this looks like a software problem. Perhaps that some registry entries are corrupted or system files are damaged.
  In any case, try to use applications to clean the registry. I use the CCleaner. It s a freeware tool and you can find it on most of the download sites. Google a bit.

• Stream 7: rotation screen problems

  After installing the drivers for the rotation of the screen but I work finally, the landscape is correct when you turn to me on the side, but when I turn the current 7 - portrait vertically is to show the opposite way round. upside down.

  Some would like to help with this please if possible

  With the hp support assistant help. NA not work several times then uninstalled screen pilots and worked.

• Set the rotation of the screen to external monitor on Portege M400

  I would like to be able to use the screen of the mobile phone in the form of tablets, while the display to an external monitor. The problem is that when you use the laptop in its Tablet configuration (fixed and swivel screen on top) the external monitor displays the image upside down. If I rotate the screen image output, so I use the Tablet upside which is impossible when it is docked. Is it all the same independently set the rotation of the screen of the Tablet and the external screen?
  If someone could help me with this I would be grateful as at this moment whether or not I have to remove the Tablet and use backwards the external monitor.

  I use Windows tablet PC on a Portege M400 and a monitor external 22 "LCD

  Thank you.

  Before we start the discussion I just have one question: do you want to use extended desktop or office cloned on external monitor?

• Touch screen does not work on the old Portege M400

  I'm trying to restore an old Toshiba Portege M400. I have WIN XP Tablet 2005 installed and which, according to me, are all the drivers. Everything works perfectly except the touch screen.

  I've been all over the web, downloaded and installed some drivers WACOM Vigneau suggested in another thread here - still no luck.

  Anyone have any ideas or experience on how to solve this problem?

  > I would not be able to use my fingernail or or a pencil eraser to type with (I don't have any kind of pen) just to test?

  To my knowledge, you have the pen in order to use the touch screen.
  As far as I know there are two pens in the portege M400.
  The reserve pen located at the bottom of the unit that there should be a slot that the second pen.

• Portege M400: Black screen from time to time

  Hello!

  I have a little problem with my Portege M400 Tablet PC. The laptop runs great most of the time. Unfortunately, from time to time, the screen goes all black - or to be more precise, the screen shows up again. In most cases, the display has been disabled by my energy saving profile, and when I try to put the screen back on (for example by moving the slider or press any key, just like usual), the screen remains black. I see that the computer works and I can for example hibernate the computer, but even after waking up, the screen is always black. Also, it does not help to change the power profile or output or anything - the screen remains like that until I restart the computer.

  I have the new bios 1.80 (because of the better fan control) and I updated the Intel chipset drivers already (I've had the problem before, so it is not the update of drivers). Any idea that he might be, perhaps the bios (it was the first thing I installed after the purchase of the laptop I knew before the fan will be strong otherwise).

  Concerning

  Alex

  Hello Alex

  I found interesting article from Microsoft about this problem. Please check under http://support.microsoft.com/kb/917332/en-us

  Of course, you must install Windows XP KB917332 on your device. This should help.

  Good luck!

• Portege M400 - where to find the touch screen XP driver

  Hello, I was wondering where I could find the touch screen for my Portege M400-S5032 pilots.
  I looked on the site Toshiba driver but could not find them.

  Thanks in advance for your help,
  Carbira1

  Hi mate

  Take a look at the Toshiba driver page we
  [Drivers Portege M400-S5032 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1598633& rpn = PPM40U & modelFilter = M400-S5032 & SelCategorie = 2756709 & selFamily = 1073768662]

  There you should find the Wacom Dual Touch driver for Windows Vista/XP
  I think it's a good thing.

• Portege M400 - CPU cooling problem

  Last year, when I had used my Portege M400 for 2 years, he started the deadlock occasionally. Sometimes [I couldn't even start it | http://www.youtube.com/watch?v=RjNa8-c2Aro]. With cut and try the method I found the problem. The Spring wire which clasps the CPU radiator, it was with not enough force:
  http://Zorko.ru/assets/files/531/531/170720102581.jpg
  http://Zorko.ru/assets/files/534/534/170720102589.jpg

  The problem was solvable by Berry to the claws spring begins to apply more force hugging the radiator of CPU:
  http://Zorko.ru/assets/files/535/535/170720102591.jpg

  Apply a new layer of thermal grease has been useful as well:
  http://Zorko.ru/assets/files/533/533/170720102585.jpg

  However, the solution works for only a few weeks. And then (especially if it's hot outside) the story begins again.

  Any suggestions how to solve the problem once and for all? Thank you.

  Hi Greendrake,

  It s really great that you are interested in your Portege M400 and you can remove it. It of really not easy and so this cannot be the people with a lot of experience.

  Anyway, as you know here our forum user s only. This means that you can speak with normal people like you and me. I would recommend therefore to contact a service provider authorized in your country. Maybe the guys know this problem or something else or you need a thermal grease special because not all compatible thermal greases all cooling.

  By the way: on the Toshiba site you can find a list of all service providers.

  I hope it helps. :)

• Portege M400: Resolution 1680 x 1050 on external screen is not available?

  Hi people,

  I just installed a Portege M400 with an external monitor from other manufacturers. This optimal resolution of the monitor is 1680 x 1050. I installed the latest Intel drivers available on the web site of toshiba with manufacturing monitor drivers. I can't get this combination in its optimal resolution. Can anyone of you help me with this problem please?

  One thing you need to know: the monitor works perfectly on another laptop... so it has nothing to do with the monitor itself...

  Thanks in advance...

  Hi Steve

  I think that you are not able to use this resolution because it s is not available in the properties of the graphics card.
  To my knowledge, doesn t graphics card driver supports different resolutions. Some of the resolutions are disabled or are not in the graphics card driver.

  Some users have solved this problem by using a different graphics driver, but this is only possible on models with the nVidia or ATI graphics cards.
  Unfortunately, I think that there is nothing to do.

• Shutdown in Vista with a Portege M400 problems

  Hello!

  I have a problem with my Toshiba Portege M400 (do not know if it is a matter for the Council of vista or portege support plate, anyway). I installed Vista Express Upgrade a few months ago and everything worked fine for a while.
  But over the last 4 weeks, my laptop seems to have a problem when stopping down. No matter if she's just hibernates or shuts down completely, the computer automatically turns itself after being off for about 5 seconds.
  I have to use the switch to turn it off again (and then it stays off). Any ideas? I haven't changed anything and it could be a hardware problem, but my guess is that it has something to do with Vista ;)

  Thank you

  Alex

  Hello

  installed some software or tools/applications/updates? Sometimes, a small update can disrupt the entire system and preventing it from functioning. So, just check what has been installed and it may be useful to install the new bios, maybe update all drivers etc... Make sure that everthing is real and up to date.

  Welcome them

• Boot Portege M400 problem

  Hello world!

  I had this Portege M400 for nearly 2.5 years and never met with such a problem.

  When I press the power button / stop * HDD led light turns on, then WiFi and then suddenly the HARD drive off * and the rest in this way: (.) Eventually, the Toshiba logo appears at the same time. I thought that problem disc HARD just to know that after 90 degrees my laptop WHAT HDD led start flashing again. Eventually, Windows loads at startup animation it would 'safe' return to normal position and expected to start Windows.

  so, I suppose the problem is somehow related to the accelerometer, is it? I don't get these gels after Windows starts. Currently I have version 3.8 BIOS and installed Windows 7 Pro...

  It's really starting to annoy me - people look at me funny, as I switch my cell phone 90 degrees :-)

  Any advice would be greatly appreciated!

  Thanks in advance!

  Best regards
  Jovan

  Hello

  Maybe it has something to do with laptops HDD?
  Maybe the head of HARD drive cannot be moved correctly and the vertical position allows to get the drive moving head again
  Unfortunately, I've never seen such strange behavior for laptop and so I can give you a few personal suggestions.
  In my view, that the HARD drive should be checked at the first maybe the problem could be solved in replacement of HARD drive

  Welcome them

• Portege M400 problem with virtualization

  I have problem with VT in BIOS VT is enabled, but Windows 7 do not. I instaled XPmode, but when I try to start I get connect this virtualization is disable. I don't know what I do mus.

  Hello

  What CPU you have in your Portege M400?

  Virtualization is a function of the motherboard (BIOS) * and * processor type. The fact is that not all processors are dematerialising and then you should check the specification on the first Intel page.

  Check this box!