Portege M400 - where the memory?

Similar Questions

• Portege M400 - where to find the touch screen XP driver

  Hello, I was wondering where I could find the touch screen for my Portege M400-S5032 pilots.
  I looked on the site Toshiba driver but could not find them.

  Thanks in advance for your help,
  Carbira1

  Hi mate

  Take a look at the Toshiba driver page we
  [Drivers Portege M400-S5032 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1598633& rpn = PPM40U & modelFilter = M400-S5032 & SelCategorie = 2756709 & selFamily = 1073768662]

  There you should find the Wacom Dual Touch driver for Windows Vista/XP
  I think it's a good thing.

• Satellite M40x - where the memory?

  Hi all

  I want to improve my memory of 512 MB to 1.5 GB. I bought 1 G RAM and when I plugged in the screen become white and computer laptop does not work. RAM is fine. I have contact the technical service of the seller, and according to them I need to remove the old 512 MB of RAM and plugged it my 1 GB of RAM for my laptop recognize the new RAM.

  To do this, I opened my keboard and under what I can only find WLAN in the middle in the left there is another local network. and the far left, I see my DVD - ROM. On the right PC card and what is - this. I don't know where is the 512 MB RAM slot. It is there somewhere.

  Is there any expert who can tell me where to find 512 MB RAM slot?

  PS: I even call Toshiba support and they said sorry according to policy, we cannot tell you.
  If expert laymen captions please help me to solve this problem.

  Please

  I checked the manual of the Satellite M40x (it can be downloaded from the Toshiba site) and if you look at page 8-7 you can find a description of the memory upgrade.

  In my opinion the 512 MB that you already is a built-in RAM that can t be upgraded because the bottom of the laptop is on only one memory slot.

  However, I think that it is not a problem to use an additional RAM module, but maybe the new RAM is not compatible with your laptop.
  What type of memory you have bought exactly? Maybe you should try it with another.

  I hope I could help a bit.

• Portege M400: Where to find Windows Vista 64-bit

  Hello!

  I've owned a Portege M400 for a period of 3-4 months now, and I wonder if there is even one person out there who managed to get this laptop computer working under vista 64-bit.

  I finally got bluetooth drivers to work, after the arrival of drivers available. But the following list does not work or I have not found drivers that work.

  -The buttons below the LCD
  -Accelometer (and all the utilities like screen rotation or to do something about tilting machine)
  HARD disk utility - protection (I installed Vista drivers, but they totally destroyed the machine and I had to restore system did not start after the installation of windows)
  -Fingerprint reader

  And I could live if I couldn't get buttons and accelometer to work, but still it would be great that the computer laptop everything would work.

  I'm starting to lose hope and I am already planning to install pirate Vista 32 bit in this laptop... Because it seems that it was a mistake to buy 64-bit ultimate. Some drivers Toshibas indicates they are pilots 'vista', but they do not yet work with the 64-bit version, which has little frustrating...

  In any case if someone could help me I would appreciate it a lot! Because I'm getting slowly frustrated with this problem with vista 64-bit.

  Thanks in advance

  I really understand you, but there is nothing to see! Toshiba Vista 64-bit drivers are not available on the Toshiba page. Nothing!

  Of course, you can use a Vista 64 bit on laptops, but you will get not all 64-bit drivers. Maybe more later but not at this time!

  So either you will switch back to Vista 32 bit or you need to use this notebook without 64-bit drivers. But this is not recommended

  Greetings

• Portege M400: when the display updated drivers will be released

  I found quite a few bugs that appear to be associated with the display as the screen turned off driver and not coming back not upward and intel has a MUCH more recent display on his site driver so my question is Walker will be communicated to toshiba a new display driver for the m400 as the current one is pathetic because it is too buggy!

  I put t know what you expect, because on the Toshiba driver page I found a new display driver. The latest version at this time was 08/02/06. To me, this looks like a very recent version. I recommend you to check the drivers available on the Toshiba page first.

• Portege M400: Where should I put the PIN for the Sim Card?

  I had the Tablet, I got the SIM... I turned on the wireless wan.

  Now, where should I put the pin code of the card?

  See you soon,.
  Miguel

  Hello

  You have installed the software from MobilLink?
  I m not a PortegeM400 owner but several owners of m400 reported this tool lets you connect to networks G3

• Portege M400 - where to find the Bios 3.80 changelog

  Hello

  is there a place where I can find the changelog of the version of the bios 1.80 to 3.80? should I upgrade?
  -do you have any experience by changing the fan? mine makes sounds that belong not here...
  -How long in your experience can take to get a response from toshiba support by e-mail? IM waiting 3 days now... :(

  Thank you

  Hello!

  I can t find a log of the changes on the Toshiba site also but why do you want to upgrade the BIOS? In my opinion a BIOS update should only be done if you have problems with your laptop or something else.
  Never touch a running system! ;)

  Before you exchange the fan you need to clean using a jet of compressed air. This could blow the dust from the cooling fans, and you should do from time to time.

  Good bye

• Portege M400 and the Toshiba with a value add

  Hello..

  I want to installed the driver toshiba of a value package Add (tool electric meter, etc.) in my Win7.
  But if I try to install the installation routine said, I have a Toshiba laptop or my Bios is low for this.
  I have the Version 3.80 Bios and I can't find any more recent Bios for the M400 version

  any ideas on the error message?

  concerning

  I can imagine that your old presage m400 is not taken in charge of Win7.
  Where you downloaded VAP for your laptop model when M400 is not on the list of drivers Win7?

• Portege M400: Since the installation of Vista the advanced instant security does not work

  Since installing vista advanced instant security functions does not have accelerometer HD works fine. Someone at - it suggestions?
  Does the re - install usual

  Hello

  You have installed all listed Vista tools & utilities Toshiba download page?
  I hope that you used the document Instructions of facilities to install things in the order of good facilities.

  Help security installed on your laptop Portege?

• Portege M400: Lost the keyboard in Input Panel

  I lost the keyboard for tablet PC Input Panel, the writing is there, but the keyboard is gray.
  Also the logon keyboard is also gray, this follows a tool of pc fixing and I must have cleaned the registry by mistake and the files have been deleted.

  Someone knows how to fix it please?

  Hello

  You can try to reinstall the utilities for Windows XP tablet edition tablet. Just go here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  Download tools and install them.

  If this doesn´t then back up all your important information and reinstall your operating system, because once something in the registry has been damaged while it is really difficult to fix. Try the first step and then reinstall your system if no success in the first stage.

  Comments would be appreciated...

  Concerning

• Touch screen does not work on the old Portege M400

  I'm trying to restore an old Toshiba Portege M400. I have WIN XP Tablet 2005 installed and which, according to me, are all the drivers. Everything works perfectly except the touch screen.

  I've been all over the web, downloaded and installed some drivers WACOM Vigneau suggested in another thread here - still no luck.

  Anyone have any ideas or experience on how to solve this problem?

  > I would not be able to use my fingernail or or a pencil eraser to type with (I don't have any kind of pen) just to test?

  To my knowledge, you have the pen in order to use the touch screen.
  As far as I know there are two pens in the portege M400.
  The reserve pen located at the bottom of the unit that there should be a slot that the second pen.

• BIOS update solved the Portege M400 fan noise

  The new version of BIOS (1.8) for Portege M400 solves the problem of fan noise. The Readme.txt explains that the temperature will rise only in three degrees. Very important, very recommended patch for users of M400.

  Now I can use my tablet in my business meetings without having to give explanations to customers of the fan noise.

  Greetings.

  Hello Jose

  It is very nice to hear that you are happy now. I read your previous assignments and I can understand you this annoying issue with cooling fan, but now you can see this laptop manufacturer is trying to make the product better, even if the product is on the market.

  I am also certain that customer s comments can help identify the problem if persist und after this systematic search for the solution or change for the better.

• Portege M400-103 powers - the automatically every morning at 09:00

  My Toshiba Portege M400 powers - the automatically every morning at 09:00. All auto market options are disabled and also my version of BIOS is upgraded to the latest version 3.20. It is very embarrassing for me because at 09:00 I'm in my car, and my laptop is in my bag. When I get to the desktop from the laptop is very hot.

  Any ideas what could be the problem?

  Thank you!

  / Vassil

  Hello

  I hope that your laptop is not in tablet mode, because if the laptop into hibernation in tablet mode and when you accidentally stick the buttons under the screen of the laptop can be awakened from hibernation mode.

• Portege M400-146 slow startup performance

  My 400 is significantly slow starts, compared to a lower specification laptop that this device was intended to replace. In addition to the understanding of the product, I see that there are more than 90 processes that run on this laptop more almost two times more than my previous unit and a lot more than my Small Business server that runs Win2k3/Exchange/ISA. My question is are there problems by removing the plethora of background tools that are of little use to me, specifically RAID/configfree

  In addition there of the best-known problems associated slow performance/hang up with IE? There is an article that should resolve the issues of States with both software and an upgrade, but he didn't, even the last published this month made no difference.

  In general, this unit is much slower than my previous spec'd base, grateful suggestions

  Hello

  I agree with you. Many processes of background can slow performance of the laptop.
  But it is a simple fact. Each application or function on the laptop needs a clean process.
  Portoge M400 is a portable high-tech and you can not compare with a low price laptops or office that support only a common features.

  The Portege M400 supports the RAID Utility, HDD Protection, Tablet PC button, utility zooming, Rotation, ConfigFree, controls, utility of fingerprints and so on and the rest.

  Of course, you can just disable or remove other feature requests, but then I wonder why you use the Portege M400 with the features and tools together?

  But you can try to upgrade the memory. To my knowledge the Portege M400 supports 4 GB memory max. The upgrade improves performance.

• Portege M400 - shoots of cursor to bottom left

  Strange here, using a Portege M400 on the docking station.

  Mouse settles at the bottom left of the screen randomly.

  Changed the mouse, people with disabilities, the touchpad, always do, drives me crazy, any thoughts?

  Hello

  Do you use external mouse for your work?