Portege M700 - 7004V Display Device change Utility does not

Similar Questions

• Re: Portege M700 - download link for the BIOS does not

  Tried to download the file to update the BIOS for Portege M700 on the Toshiba site with no luck. The file is 1: 60 - WIN. No luck. Is the link down or something? Could someone please try?

  Hello!

  I agree with zuja.
  I tried to download the BIOS for Portege M700 and now it works.

  Now you can update the BIOS. :)

  Good bye

• Portege M700 - Rotation buton and the accelerometer does not

  Running Vista Business 32-bit.

  When I put my M700 in tablet mode and tilt the tablet to 1side and press the button next to the slider he used to rotate the screen in that direction.
  He doesn't do this more. I have
  Note also that all the utilities of the accelerometer, like tilt, shake and advanced security no longer work. detection of movement of hard drive does not work.

  I reinstalled from recovery discs and installed original and new extension of the tablet version and pvat. Nothing seems to help. I also installed Windows 7 ultimate 64-bit, it does not work there either. I've actually noticed that it also does not work on vista because of this does not not under Windows 7.

  I wonder whether or not my accelerometer is broken or not because it allows to work with the original installation of discs or is it a software problem?

  Hey mate,

  > I reinstalled from recovery disks
  To be honest, if you have the same problem with the factory settings, it appears to be a malfunction of the equipment. With the settings everything should work properly without updating a software or driver.
  So I recommend you contact an authorized service provider. Guys can help you because here it s only a user to user forum.

  By the way: is the new version of the BIOS installed?

• Portege R600 - display problem device change Utility

  We started to use computers laptop Toshiba Portege R600 series on my place of work. All laptops are home in a Toshiba Slim Port Replicator II. Laptops are all running a version of Windows XP Professional with Service Pack 2 applied (and of course a few customization business).

  The problem is with the display on the external monitor. The laptop starts according to the normal and connects to the fine. The Fn + F5 key and so we can switch between the external LCD screen and the laptop monitor. We can also extend the desktop on the external monitor without problem.

  The problem occurs when the laptop is not docked since the Replicator. After having similar problems with R500 series laptops, Toshiba following applications have been installed:

  (1) common modules (version 6.06.01)
  (2) controls Toshiba (version 3.31.3800)
  (3) button ON / OFF (version 2.5.1.0_IS115)
  (4) Toshiba utility (version 4.30.18)
  (5) Toshiba screen device change Utility (version 2.5.0.0)
  (6) Toshiba Hotkey utility for display device (version 3.4.5.5)
  (7) Toshiba Mobile extension 3 for XP (version 3.87.00)

  We now have the following symptoms:

  (1) detach, the "gear" icon appears and then the error "TOSHIBA Display Device change Utility is not installed correctly. Please install TOSHIBA screen utility unit of change. "
  (2) for the mooring of the laptop again, we get the "home" icon, and then the same error.
  (3) after that, the external monitor does not become active once again, until what you press Fn + F5.

  I have tried uninstalling / reinstalling the TOSHIBA screen device change utility. Have tried to remove the Mobile Extensions and install the software, tried a number of different things to make it work. Rebuilt 1 stop working and everything was installed in the order above without success. In fact, noted that during the installation of the TOSHIBA utility screen device Change the Setup screen starts and runs, but the window does not uninstall.

  This seems to be a driver problem with those from Toshiba, but I'm not sure. Someone at - it suggestions regarding this? The drivers that I use are on the site of Toshiba Australia (even if they are the same drivers found on the main website of Toshiba). The link below.

  http://www.ISD.Toshiba.com.au/71/live.dll/topic/content/driver_search_list.jsp?BV_SessionID=@@@1187200925 .1241154604@@@&BV_EngineID=ccccadeglfeghejcefecek fdffhdfgh.0 & theAction = true & CATOID =-15058 & MODE = NPRO & ProductMenu_0 = Notebooks & ProductMen u_1 = Portege & ProductMenu_2 = 1509603 & x = 22 & y = 7

  Post edited by: Will-SOE

  We have tried this on a couple of machines that are the same exact specifications. The model that is sold in Australia is a Portege R600, model PPR61A.

• Portege M200: Rotation utility does not work with the new driver

  Hello

  I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.

  When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.

  Anyone any ideas?

  Hello

  You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site

• Airport utility does not support my Airport - options to change the channel?

  I have an older Airport - extreme, I think, and the utility does not support.  I'm out of luck to change channel?  Time Warner said their modem did not support my newest Airport (? it's TWC) and now the internet keeps smoking at least once or twice a day.

  I suggest that you keep it simple.

  Your airport automatically analyze and choose the best channel to use when it lights up. So, if you have not done for some time, powering to the airport, wait a few seconds and then put it to the top.

  Even if you could change the channel... How would you know which channel to choose?

  Time Warner said that their modem did not support my most recent airport

  Time Warner will only support for a product they have received for you.  But this does not mean that a router from Apple will not work with their service. I've used Apple products for over 10 years with Time Warner.

• Connection problem diagnosis - "the remote device or resource does not accept the connection detected.

  My computer is a Windows Vista Home Premium 32-bit. The problem occurred about 2 months ago, while he was still in Vista, but please note that I've upgraded to Windows 7 last night and the problem is always the same.

  My Internet Explorer, updates to the computer, iTunes and everything, EXCEPT my AOL, does not work. My connection says 'excellent '. (Hang everything on my laptop to my wireless are works fine, that my office is having this problem)
  When I click on Internet Explorer, it says "Internet Explorer cannot display the webpage", and when I click on "analyze the connection problem" said "problems discovered - the remote device or resource does not accept the connection detected.
  I talked to my internet provider Comcast all morning this problem: she said that his side internet connections work properly. She walked through me steps including reconnected the router cords, control the way in which the Internet is put in place and other things, but everything was how it was supposed to be. She suggested that maybe AOL could be the problem and to remove it because I used it, so I did, but nothing has changed. So then she told me to contact Windows... (not sure how to call technical Windows supports without having to pay $59?, but found this forum)
  Is anyone familiar with this problem and could you please help or at least point me in the right direction?
  In addition, please let me know if you need any other information on the problem.
  Thank you
  Lily

  Hello

  Try the steps from the following link

  http://support.Microsoft.com/default.aspx/KB/956196

• The remote device or resource does not accept the connection

  I have a desktop computer Windows 7 connected to my router via an ethernet cable, but when I try to go to a website on Google Chrome as Google.ca, loading the page forever without even showing the page. Finally after a long wait, it finally says that the Web page is not available. I tried to go to the Web sites by using Internet Explorer, but occurs the same result. I tried to troubleshoot the problem and it "the remote device or resource does not accept the connection" is detected, but does not set automatically. I have a wireless printer connected to my router which is online and works very well. I can even connect to my router page. But still no access to Web pages don't like my outlook.com and etc. Sometimes a go open the network and sharing Center to change the settings of the card and disable the wired ethernet only to activate it again. It works only a few times, and it's really frustrating, because it is the only computer that does not connect to the internet, even with a ethernet cable. Please find a solution as soon as possible. Thank you.

  Hello Kyle,.

  Your computer is connected to a domain network?

  If your computer is connected to a domain network, then, I suggest you follow the link below to post your query in the TechNet forums, because they have more expertise on this issue.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Otherwise, try to follow the following suggestions to solve the problem.

  "Internet Explorer cannot display the webpage" error

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Also refer to:

  The remote device or resource does not accept the connection

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Connected to but the Airport utility does not see the time capsules

  Hi, I have several time capsules.

  I can connect to the web, but the airport utility does not see the time capsules.  I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.

  What now?

  Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.

  Other than what Mac running what OS do you use?

  This modem you have and how is the installation of TC on the network.

• IE9 "the remote device or resource does not accept the connection.

  IE9, "the remote device or resource does not accept the connection" appears when you try to open any website. My office to tell me that it is connected but cannot access any www. Meanwhile, my laptop connects fine. I have reset the settings in the internet options does not. I downloaded 'team' to connect (or similar) and asked for a connection and I thought that suspicious so uninstall this program... leaving me without access to the internet... * sigh * please can someone help me?

  Hello

  
  Method 1:
   
  Step 1:
   
  Run the network troubleshooter and see if that diagnoses the problem.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Step 2:
   
  Reference:
   
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  See also:
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
   
  Method 2:
   
  Temporarily disable antivirus programs and firewalls.

  Disable the anti-virus software

  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewall

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  Warning:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   
  Display the results.

• Change in does not work, LR4.4 PS CS6

  Hello

  This weekend I wiped my computer clean and Im trying to reinstall everyting to work status.
  Installed LR4.
  Upgrade to LR4.4
  Installed Creative suite CS6.

  In LR, I see the option change to and PS.

  But its grey and unclickable.

  I'll upgrade to LR6, but I wasn't planning for it NOW.
  But if it does not solve the problem the opposite way, I will now consider doing.
  My biggest concern is to get Premiere Pro works with the eyes of the plural before Thursday.
  I really need that work with 4 cameras and 3 devices of sound recordning for a job.

  Best regards Erik Schalin

  Ha ha ha

  OMG

  Its much simpler than that.

  Disk drive letters changed.

  Of course he can not go to PS when the image has a broken link.

  Reset the drive letters did the trick.

  Thanks for trying to help.

  Feel a bit silly...

  / Erik

  2016-05-23 11:05 GMT + 02:00 Sharma assani [email protected]>:

  Change in does not work, LR4.4 PS CS6 created by Akash Sharma

  https://forums.Adobe.com/people/Akash+Sharma> in Photoshop Lightroom - view

  the discussion complete https://forums.adobe.com/message/8766498#8766498>

• Disk utility does not see an external drive on my network

  I'm trying to reformat the external drive that I use for backup on Time Machine, but disk utility does not see it. She appears in the Finder as a shared drive. I use OS x 10.11.6. Thank you.

  Disk utility is not supposed to see the network drives.

  If it's a USB, connect it to your computer.

  If it's an Ethernet or wireless, using a utility specifically designed for this.

  (145027)

• Fingerprint utility does not recognize the password website - Satellite U400

  Problems with the password Bank (TrueSuite Access Manager, 2.5.29.0 latest version;) Vista); Utility does not work, does not recognize the Web site password entry, doesn't react at all. Tried it in IE8 and Opera 10, tried to reinstall Truesuite Access Manager. The fingerprint login works fine, very well file protection works.

  Someone at - it the same problem? Any ideas on a solution?

  Thank you.

  Thanks for the comments.
  If you have questions try to find answer using the advanced search options.
  In this forum, you'll find helpful advice a lot or comments about so many different issues with Toshiba laptops.

• Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network

  Hello

  My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
  In our office, the computers are all equipped with Windows XP.

  When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
  I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.

  I hope you understand what I mean.

  The man said that he had no this problem with non - OEM Windows Vista versions.
  He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
  He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.

  Does anyone have an idea of the cause of this problem?

  > The man said that he had no this problem with non - OEM Windows Vista versions.
  > It meant that the problem was with the oem versions of Vista preinstalled on laptops only.

  That's nonsense for me
  The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
  There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and tools

  Check this box:
  http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1

  You will find information that a problem has to do with the new Windows Vista network map.
  Windows Vista uses a new Protocol (Link Layer Topology Discovery).
  LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
  But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.

  But you can fix the problem by downloading and installing the layer topology discovery responder.
  Install it and your PC Windows XP will appear on the network map.

• latest mac change icons does not work

  have the latest version of the software changing icons does not work

  Maurliz51 wrote:

  have the latest version of the software changing icons does not work

  Do you mean El Capitan 10.11.2?

  How are you trying to change the icons? You paste a new icon in the window read the information of a file?