Portege M700: Device Manager reveals five peripheral generic HID-Compliant

Similar Questions

• Portege M700 - 4 devices called Data Interface in the Device Manager

  I am facing a problem with the toshiba portege m700.
  In Device Manager, I have 4 devices called Data Interface.

  I completely wiped the hard drive and formatted in ntfs.
  Then installed Windows Vista 32-bit and installed all the drivers available on the toshiba site, but I find myself with four instances of data Interface in other devices in Device Manager.

  Can anyone help?

  Hardware ID data interface:

  USB\VID_0930 & PID_1302 & REV_0000 & MI_00

  USB\VID_0930 & PID_1302 & MI_00

  Have you installed the O2Micro smart card reader? O2Micro Smart Card Reader which allows you to authenticate on your computer with a smart card and a PIN code.

  In addition, you should check if the Wireless Mobile Broadband of Novatel has been installed too!

• Portege M700 - 3G does not work and has no entry in the Device Manager

  Hello

  I've already found [this | http://aps2.toshiba-tro.de/kb0/TSB0302TL0000R01.htm] for 3G installation, but it does not help me. In my device manager is no entry called 'Data Interface', and that's why the guide will not work. Under "modem" is only the "TOSHIBA Software Modem. The LED next to the orange wlan LED is off. When I use FN + F8, the I get only entries for Wlan and Bluetooth. In the Bios (or what ever Toshiba call a bios, 3 pages with very few options, very bad in my opinion) I couldn't find any option to turn on the 3g modem (I suspected that it be turned off in the Bios).

  Is there an option where my 3G modem could be turned off, so that the device manager would be ' d recognize it? WIFI and BT operate correctly.

  A new SIM card is correctly inserted in the SIM slot behind the battery. I can't find my problem described in the web or this support forum.

  Any help is appreciated!

  Hello use

  Your laptop is preinstalled with original Toshiba recovery image, I mean you have to factory settings?

• TrueSuite Access Manager on Portege M700 - 13p

  Whenever I start my new Portege M700 this program says that the drivers are not installed for the fingerprint reader and t testing install again. Install TrueSuite Access Manager starts and then it asks me to restart my PC. Every time. I'm currently ignoring this but it bothers me.

  I can connect with the fingerprint reader, which suggests that the message is bogus.

  Recommend a way to solve this problem?

  I'm tempted to remove the device from the hardware Manager and uninstall the software, then restart, reinstall the software and then redetect the hardware...

  Anyone got a better idea before that I'm wasting my time?

  See you soon,.

  Rob.

  I agree with you and I think that the first step, you can try to remove preinstalled software and install the latest version of the Toshiba support page.

• Unable to set the display resolution, Intel HD 4600 in Device Manager displays ' generic non-pnp monitor low resolution.

  I am slot as Windows 7 Pro on a Dell Intel 64 bit pc with a screen HD Dell I5 and Intel HD graphics 4600 driver.  PC woke up a few hours of inactivity, after no updates known to windows or other programs, with icons and pages double size beyond the limits of the monitor, setting the low resolution and Device Manager showing ' no generic pnp monitor low resolution ' instead of 'Monitor Dell HD' and no option to increase the resolution.  No help with reset, not restoration, disconnection and reconnection monitor auto plug n Play, 'Search new device', 'add a device', update of the graphics driver, reinstall the drivers from the Dell monitor.  Troubleshooting peripheral reported to date and working correctly.  After I finally uninstalled driver restarted, and graphic displays "default monitor" Device Manager (no longer "generic low resolution"), no graphics driver identified, but don't allow me to change to a higher resolution.  New windows had to be individually size / expanded to fill the screen.  This can be corrected?  I want to optimize my display settings for this monitor.  I have reinstall my graphics driver or just be happy that I can use my computer?  Thank you.

  Call Dell.  Your monitor should have a 3-year warranty.  Your matching OptiPlex with a warranty of one year more.

  Also, check all the hidden and invisible buttons on the monitor.  Someone may have inadvertently changed one of these.

• Portege M200 - device unknown in Device Manager

  I did a clean install of Windows XP on my toshiba portege m200 (Tablet). I have most of the devices drivers installed, but there is one that I can't understand. The device manager says I have an "unknown device" on my "Intel 82801 dbm lpc interface controller.

  What is it? I thought it was the chip set, but I had installed the Intel chipset drivers (twice, just to make sure that I really did), but it still reads as 'unknown device' on ' Intel (r) 82801DBM LPC Interface Controller - 24CC.

  To resolve this issue go to the device, right click on the unknown device, Manager and then select set to update driver.
  When the Hardware Update Wizard appears, select the advanced option.
  From the next window, select the 'don't search. I will choose the driver' option
  Now, go to the Intel announcement and select good "82801DBM LPC Interface Controller - 24CC.
  Click OK and now it should work.

  Also, be sure you have all the drivers installed from Toshiba Web site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Portege M700-106: unable to start the task manager & programs after Vista sleep

  Hello

  In fact I am facing problem like below...
  Configuration: Portege M700-106 with upgrades (Hynix Kingston 4 GB, WD Scorpio 320 GB with jumper default config doesn't = no jumper)
  Reinstalled system from Toshiba DVD recovery, all updates possible on web too.

  However, when I wake Vista from the suspense Task Manager I think I can't start (continuous report) some programs (e.g. ThunderbirdPortable of SDHC), all other programs works well enough.

  Anyone can know the reason, solution for this?

  Thanks for help

  Staszek

  Hello

  As far as I understand, you are not able to use some 3rd party applications after the awakening of Eve Vista but other applications running ok only software Thunderbird Portable to the SDHC card.

  Well, I have come to the conclusion that the card reader can hangs after the awakening of the stand by mode or the ThunderbirdPortable should be repeated. Probably it s not a problem of Vista, but question ThunderbirdPortable.
  Have you tried to search if this is a known issue with this software?

  I would recommend this review!

• Portege M700 - 7004V Display Device change Utility does not

  Hi all.

  I have problems with the utility to change device display on my Portege M700.
  I am in charge of a school district with 110 Portege tablets, but I can't understand it.

  For some reason any when I press Fn + F5 (which is the default configuration to switch display devices), nothing really happens.
  The screen flickers very quickly as if she is still looking for another device. Press it again, the same thing happens.
  Press it again, the screen goes black (as it should), but even when nothing is displayed on the projector connected to him.

  On all the other 109 pills I, change display utility works very well.
  In fact, if you hold down FN and press F5, but continue to hold down the Fn key, a box appears and tells you which device you try to switch to.

  Here is my configuration:

  Windows XP SP3 (up to date)
  New version of:
  Intel graphics drivers
  Toshiba controls
  TOSHIBA Hotkey utility for display devices
  Toshiba display device change utility
  Toshiba Mobile Extension

  This computer is imaged from the same image that have other computers (which all work.)

  Is there something in the registry that toggles? Is there something in msconfig, that I can check? This problem is to get the best of me!

  Thanks to anyone with the time and patience to help!

  Hello

  To be honest, I put t know what might be the problem, but it is recommended to reinstall the necessary drivers.
  First of all, you need the common Modules!
  This tool must be installed first.
  Then you can try again to install the v2.0.1.9 change of display device. and then the Hotkey utilities for display v3.4.5.5 devices

  Also the display driver should be updated and if necessary check the update of the BIOS.

• Portege 2000: How to add device in Device Manager base system?

  Hello

  I'm trying to implement the SD card reader on my Portege 2000 running the Windows XP operating system.

  I downloaded and installed the common modules and my BIOS has not updated.

  I downloaded the SD host controller driver, but can't install it because I have no base system device manager for devices by reading me.

  How do I get this so I can allow my SD card reader?

  Thank you, happy new year

  Becky

  Hello

  Base system device is usually the SD card controller. If you just install it should correct the problem.
  SD host controller driver should be installed first. After the SD host controller driver is installed, you can install the SD memory card driver. The driver can be installed as follows:

  SD host controller driver,
  1. from the [start] menu, select [Settings], then click [Control Panel].
  2. double-click [System], and select the [Hardware] tab.
  3. click on [Device Manager].
  4. double-click on [device Base System].
  5. Select the [driver] tab and click [set to update driver].
  6. click [next] and select [display a list of drivers that are known...].
  7. click [next] and select [ECS] in [hardware types].
  8. click on the [disc] button.
  9 locate the folder "{CD player}: Windows XP Pro\Toshiba SD Host Controller Driver" and follow the instructions on the screen.
  10. Finally, restart the Windows

  For the SD memory card driver

  After you have installed the SD host controller driver,
  1. Insert the SD memory card into the SD slot.
  2 operating system detects and starts to install the driver from SD card.
  3. specify the INF ({CD player}: Windows XP Pro\Toshiba Driver SD Memory Card) and forward the installation process.
  4 copy the file SDDEVMGR.dll in the Windows system directory.
  Note that the system directory means \WINDOWS\SYSTEM32 for Windows XP.

• Satellite A200-1The - peripheral unknown in Device Manager

  I have the suite listed under question marks in my device manager:

  ? Multimedia controller
  ? Network controller
  ? Unknown device

  I installed the sound and it works
  I installed the network card and it works

  What are the above devices?

  Stand by. Which operating system you are trying to configure?

  Have you checked on the Toshiba download section if the installations Instructions document is available? If you follow this document you will install everything you need and everything will be OK.
  Anyway, multimedia controller can be peripheral multicard reader, network controller is probably wireless card. I can't say what unknown device because I know not what drivers you have installed.

• What is generic PnP in Device Manager?

  Original title: Identification of the display by the Device Manager in Windows 7

  Hello community,

  I have two Dell 24 "ultrasharp monitors connected to my computer (i.e., Dell Dimension XPS 420) via an Nvidia GeForce GT 620 graphics card. When I check the device to the display manager, it shows the first monitor as a generic "PnP" monitor and the second as a Dell screen. In addition, I chose the second monitor as the main one. Does anyone know why the first monitor is referred to as under the generic name by Device Manager?

  Thank you in advance.

  Hello

  Thanks for posting in the Microsoft Community Forum. Rest assured that we would do our best to help you.

  A generic driver just means that Windows 7 has installed one of its drivers and the component should work fine, but maybe not as many features as the drivers from the manufacturer.

  If you're worried, just go to the support site for the manufacturer of your area and see if there are any drivers you can download and install.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information helps. Please do not hesitate to answer, we would be happy to help.

• After installing WXP Satellite A200 reveals an error in device manager

  Hello

  I reinstalled my pc with windows XP, but after installation, there is a mistake of the ethernet controller in Device Manager.
  Can someone help me find the right driver for this problem?

  Here is the information from my pc:

  SYSTEM
  ======

  Host name: THUIS-1
  IP address: 127.0.0.1
  Username: THUIS-1\
  Description:
  Operating system: Microsoft Windows XP Professional (5.1.2600 version; build 2600)
  Name: Microsoft Windows XP Professional
  Version: 5.1.2600
  Build: 2600
  Install date: 2010-11-03 17:36:37
  Service pack: Service Pack 2

  Model: Satellite A200
  BIOS: TOSHIBA (version: V5.20; date: 16/08/2007)
  Manufacturer: TOSHIBA
  Version: V5.20
  Date: 08/16/2007
  Serial number: 67195868K
  Motherboard: TOSHIBA (ISKAE; version: 1.00)
  Manufacturer: TOSHIBA
  Product: ISKAE
  Version: 1.00
  Chassis: Notebook
  Processor: Genuine Intel(r) CPU T2130 1.86 GHz (architecture: x 86; 1862 MHz)
  Name: Genuine Intel(r) CPU T2130 @ 1.86GHz
  Manufacturer: GenuineIntel
  Max clock speed: 1862 MHz
  Architecture: x 86
  2: 1 024 KB level cache size
  Socket type: U2E1
  Version: Model 14, stepping 12
  Processor: Genuine Intel(r) CPU T2130 1.86 GHz (architecture: x 86; 1862 MHz)
  Name: Genuine Intel(r) CPU T2130 @ 1.86GHz
  Manufacturer: GenuineIntel
  Max clock speed: 1862 MHz
  Architecture: x 86
  2: 1 024 KB level cache size
  Socket type: U2E1
  Version: Model 14, stepping 12
  Physical memory: 2.0 GB
  Memory: 1.0 GB (Bank 0; form factor: SODIMM; memory type: unknown)
  Capacity: 1.0 GB
  The device index: M1
  Label of the Bank: Bank 0
  Form factor: SODIMM
  Memory type: unknown
  Manufacturer:
  Speed:
  Maximum capacity: 3.0 GB
  Memory: 1.0 GB (Bank 1; form factor: SODIMM; memory type: unknown)
  Capacity: 1.0 GB
  The device index: M2
  Label of the Bank: Bank 1
  Form factor: SODIMM
  Memory type: unknown
  Manufacturer:
  Speed:
  Maximum capacity: 3.0 GB
  Disk: TOSHIBA MK1637GSX (149,0 GB)
  Legend: TOSHIBA MK1637GSX
  Size: 149,0 GB
  Manufacturer: (Standaardschijfstations)
  Interface type: IDE
  Media type: fixed the hard drive carrier
  Bytes per sector: 512
  Heads: 255
  Cylinders: 19457
  Sectors: 312576705
  Other titles: 4961535

  SOFTWARE
  ========

  Atheros Client Utility
  Camera Assistant Software for Toshiba, Version: 1.7.147.0628
  Geluiddemper (c) cd/dvd-station, Version: 1.00.008
  High Definition Audio Driver Package - KB888111, Version: 20040219.000000
  Intel(r) Graphics Media Accelerator Driver
  Intel (r) PROSet/Wireless Software, Version: 11.01.0000
  Marvell Miniport driver, Version: 8.46.4.3
  mCore, Version: 9.09.0000
  mDrWiFi, Version: 9.09.0000
  mHelp, Version: 9.09.0000
  mIWA, Version: 9.09.0000
  mLogView, Version: 9.09.0000
  mMHouse, Version: 9.09.0000
  mPfMgr, Version: 9.09.0000
  mPfWiz, Version: 9.09.0000
  mProSafe, Version: 9.00.0000
  mSCfg, Version: 9.09.0000
  MSXML 6.0 Parser, Version: 6.00.3883.8
  mWlsSafe, Version: 9.00.0000
  mZConfig, Version: 9.09.0000
  REALTEK GbE & FE Ethernet PCI-E NIC Driver, Version: 1.26.0000
  Realtek High Definition Audio Driver, Version: 5.10.0.5464
  Texas Instruments PCIxx21 / x 515/xx12 drivers., Version: 2.00.0001
  TOSHIBA Accessibility, Version: 0.49.2.1C
  TOSHIBA ConfigFree, Version: 5.90.07
  Modem TOSHIBA Software, Version: 2.1.77 (SM2177ALD04)
  TOSHIBA Supervisorwachtwoord, Version: 0.49.2.1C
  TOSHIBA-zoomutility, Version: 2.00.00.24c

  PROCESS
  =========

  ACS.exe (C:\WINDOWS\system32\acs.exe)
  ACU.exe (C:\Program Files\Atheros\ACU.exe)
  agrsmsvc.exe (C:\WINDOWS\system32\agrsmsvc.exe)
  CFSServ.exe (C:\Program Files\TOSHIBA\ConfigFree\CFSServ.exe)
  CFSvcs.exe (C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe)
  Ctfmon.exe (C:\WINDOWS\system32\ctfmon.exe)
  EvtEng.exe (C:\Program Files\Intel\Wireless\Bin\EvtEng.exe)
  Explorer.exe (C:\WINDOWS\Explorer.EXE)
  freepcaudit.exe (F:\freepcaudit.exe)
  Hkcmd.exe (C:\WINDOWS\system32\hkcmd.exe)
  iFrmewrk.exe (C:\Program Files\Intel\Wireless\Bin\ifrmewrk.exe)
  igfxpers.exe (C:\WINDOWS\system32\igfxpers.exe)
  igfxsrvc.exe (C:\WINDOWS\system32\igfxsrvc.exe)
  igfxtray.exe (C:\WINDOWS\system32\igfxtray.exe)
  Lsass.exe (C:\WINDOWS\system32\lsass.exe)
  RegSrvc.exe (C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe)
  RTHDCPL.exe (C:\WINDOWS\RTHDCPL. (EXE)
  Rundll32.exe (C:\WINDOWS\system32\rundll32.exe)
  S24evmon.exe (C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe)
  services.exe (C:\WINDOWS\system32\services.exe)
  SmoothView.exe (C:\Program Files\TOSHIBA\TOSHIBA-zoomutility\SmoothView.exe)
  Smss.exe (C:\WINDOWS\System32\smss.exe)
  Spoolsv.exe (C:\WINDOWS\system32\spoolsv.exe)
  Svchost.exe (C:\WINDOWS\system32\svchost.exe)
  Svchost.exe (C:\WINDOWS\System32\svchost.exe)
  TCtrlIOHook.exe (C:\WINDOWS\system32\TCtrlIOHook.exe)
  TOSCDSPD.exe (C:\Program Files\TOSHIBA\TOSCDSPD\toscdspd.exe)
  traybar.exe (C:\Program Camera Assistant Software for Toshiba\traybar.exe)
  Winlogon.exe (C:\WINDOWS\system32\winlogon.exe)
  wscntfy.exe (C:\WINDOWS\system32\wscntfy.exe)
  ZCfgSvc.exe (C:\Program Files\Intel\Wireless\bin\ZCfgSvc.exe)
  ZoomingHook.exe (C:\WINDOWS\system32\ZoomingHook.exe)

  I hope someone can help me!

  GR

  Go to the download page of Toshiba in http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp and search drivers for Satellite A200 PSAE0E.

  I can see driver LAN WXP is there and it is version 5.664.205.2007.
  Can you please install and see what happens?

• Portege R700 (PT311E) - unknown device in XP Device Manager

  I managed to identify all devices except this one. It appears in the device as a Manager:

  Location: on Intel QM57 Express Chipset LPC Interface Controller - B 3, 07
  Device Instance ID of: ACPI\IFX0102\4 & 375529C 7 & 0

  Any suggestions?

  Concerning

  Simon

  Hey,.

  In my opinion, this device has something to with the chipset and, therefore, you have to install the Intel chipset driver. You can download all the drivers of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com

  Also check the ID provider and exact device in Device Manager to identify this device. The PCI database website can help you do this:
  http://PCIDatabase.com/

• Satellite L500D - peripheral unknown listed in Device Manager

  Hello world

  I have a Satellite L500D and in other devices under Device Manager, I have unknown device listed. I installed all the drives listed on the Toshiba page without success, anyone had this before and if so please can you me how to fix it.

  Can you please tell us what OS you are using?

  Anyway, how to identify an unknown device in Device Manager, you can read here
  http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htm

  Please, check and send comments.

• Re: Satellite L300 - peripheral unknown in Device Manager

  Hello

  Satellite L300 OS - Vista 32

  I installed again software to use the USB port to connect the Council and this Council during this installation program that some things went wrong and all my USB port does not not or does do not at all...

  When I checked the Device Manager it shows like any other device-> unknown device...

  I have install the Toshiba download chipset and still I can t solve the prob...

  my USB all the port does not...
  My WiFi is not working...
  my camera does not work...

  rest of all work, I guess that any suggestion to solve this problem?

  Hello

  Would it be possible that the 3rd party software that you have installed to use the USB ports has tangled up the whole system?

  The driver for the unknown device that appear in Device Manager can be identified very easily.

  I recommend this HowTo:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  You have the Vendor ID and the device ID and the use of these two IDS in pci database would help you to find the right driver.

  By the way: If your Wlan and cam n t work, install the drivers matrix, you've already tried this?