Portege M700 falls down after upgrading to Windows 7 32 bit

Similar Questions

• Cannot connect to Internet after upgrading to Windows 7 64-bit Aspire M5100

  I upgraded from Vista Home Premium 32-bit, Windows 7 Home Premium 64-bit. I have a Marvell yukon 88E8056 PCI-E Gigabit Ethernet Controller. I tried updating the driver, but it has yet to solve the problem. I am able to connect through a usb wireless adapter.

  I noticed someone had this problem with a M3100 and the solved the problem by replacing the Ethernet card. I hope that I don't have to do since I've upgraded to Windows 7 using an OEM version. As I understand it, you can change to any material after I installed the OEM version.

  When I ran the Windows 7 Upgrade Advisor there was compatibility issues: 1) the card Ethernet, 2) graphics card.

  He said go to the device manufacturer's website and download the latest version of the driver. I thought that's what I did, but it still doesn't work. I have all the 'exclamation points"in the Device Manager. Everything said that it works correctly.

  Maybe I'm not download the appropriate driver. Should I just go for the driver and the driver update rather than choose one myself and downloading?

  If I end up installing a new Ethernet card going to work?

  Any suggestions?

  Good. It's just to install and configure the new network card. If all goes well, assuming that Murphy does not, it should be easy sailing! Let me know how it goes.

• Audio Cup after upgrading to Windows 7 64 bit

  I recently updated a workstation reasonably powerful BOXX made from Windows XP to Windows 7 64 bit.  The only thing that does not seem to have gone well refers to audio.  Any application I play audio, it cuts out / falls for about one second every 3 to 10 seconds.  In Adobe first CC Pro and Adobe Audition CC, sounds cuts out.  When I play a video directly on YouTube, he stops and sometimes even lets out a nervous cry, so I don't think its a problem to Adobe.

  Workstation BOXX, with a NVIDIA Quadro K4200 graphics card.  Processors: Two X 5550 2.67 GHz; 12 GB OF RAM.

  Device Manager shows two audio devices / drivers: NVIDIA High Definition Audio; and a Realtek High Definition Audio.

  In case there was a conflict, but it makes no difference, I disabled the NVIDIA driver.  Always cut.

  Interest, sometimes when I have audio playback in Adobe Audition CC on the audio timeline, I can see the time meter stall periodically and restart, not necessarily in harmony with the cuts.  The end of a two-minute audio current reading, audio play is over, but the marker of time has not reached the end of the audio waveform display and moves again.

  None of the above happened before the upgrade to Windows 7.  Thanks for your suggestions, you can provide.

  This sounds like a driver issue, did you test if your hardware is compatible with Windows 64-bit?

  http://Windows.Microsoft.com/en-GB/Windows/Update-driver-hardware-ISN

• Reinstall Visio after upgrade to Windows 7 64 bit

  Hello everyone. I installed Windows 7-64 bit. My upgrade went without a hitch except to reinstall one of my Office programs. I am trying to reinstall Visio Professional 2003, however, my first legal installation disc is Visio 98. Windows 7-64 bit will not install this version, so I'm stuck without a track to upgrade in order to activate properly. How to work around this problem. I tried to join the team of Visio, but I see that they want to get my credit card on which I am not too happy to... Help... Please...

  Thank you.

  E-mail address is removed from the privacy *.

  I know it's late to this thread over 3 years, but I recently found this problem on the copy of my dad from win7 64.

  With success, I was able to install 4.5 Visio standard, Visio 5.0 update and upgrade Visio 2002.  Everything worked successfully on win7, but the older versions had some quirks to fix in the installation process for 2002 to see them on the hard drive and to recognize as valid evolutionary products.

  The main problem is that version visio 4.5 and 5.0 used an old 16-bit installshield Setup program.

  The applications themselves are 32-bit and will be running in compat for windows NT 4.0 mode in win7 64-bit.

  My solution was to get a program that will extract the old cab of installshield used on the cd files.

  The file to extract cd is called 'data.z' and you must check out it in a good location on your hard drive.

  I used the program Universal Extractor from the following site:

  http://legroom.NET/software/UniExtract

  the extraction method used was i3comp.

  Once the records from HD, I created a shortcut to the executable visio in the extracted folder, in the properties of the shortcut I went to the compatibility options and click on it to change the settings for all users.  Here, I did the program running under Windows NT 4.0 and run as administrator.

  I then tested successfully the Visio 4.5 and 5.0 with this method to ensure that any registry or ini file stuff needed by the installer of 2002 would be easier.

  After I checked they were running and working on win7 64, I put in the 2002 Update CD recently bought new by the amazon seller.

  Setup has found the copy to hard disk, and I told it to install over Visio 5.0 on hard disk folder.

  When I launched visio 2002, he asked to activate, I then just let my dad continue the activation process of Visio 2002 update because it was actually him who had bought and she belonged and was installed on his computer.

  He had worked for a couple of hours and finally had put on his machine virtual windows xp win7, but wanted on his real win7 64 bit installation.

  I had the chance to help her for about an hour, and it was enough time to understand the problem and get Visio 2002 working for him.

  I note that there is a point in the installation process when upgrade version wants to find the old copy to upgrade, he will try to get the hard disk and you will almost seem to be frozen, but the style hourglass turns the pointer of the mouse circle will be always moving.  As long as you wait outside it will be eventually find the older version installed.

  Finally, on my father's computer, there are more than 1 million files from different programs and documents to go, after about 5-6 minutes setup are the old copy and continued.

  After it's done only internet activation is required.

  Hope this helps someone.

• Runes of Magic will not play after upgrade to Windows 7 64-bit

  Have upgraded to window7 64 bit that I use now the 8 GB of ram

  Runes of Magic was playing on my old windows version but usually install a new

  Get message that windows could not find a version of the game, so I downloaded the patches for the game manually

  Game Launcher now returns but crashes after I selected the game

  Any help would be greatly appreciated

  Thank you

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the full error message or error code?

  I suggest to perform a clean boot, and then try to download and install the game and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Note: Runes of Magic is compatible with Windows 7 64 bit

  Reference:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=runes%20Of%20Magic%20&OS=64-bit

  Note: If you still have the problem then I suggest you to contact the game manufacturer.

• Blu Ray does not work after upgrade to Windows 7 64-bit

  Hope someone can help with this problem. I found a lot of forum and users with similar problems but I can't solve this problem.

  I bought this HP Pavilion DV7-1055EA about 3 years ago the drive blu - ray one of the points of sale, it was loaded with Vista 32 bit. After making this computer has 4 GB of RAM instead of 3, I did a clean install of windows 7 64-bit. After which my Blu Ray player stopped working.

  When inserting a CD/DVD, the drive works fine and everything is as usual, however when insert a Blu Ray disc windows does not recognize the drive IE "drive is empty".

  Different things, I tried to set the inclusion of the problem, reflashing the BIOS, install the latest firmware, re - install the game media, installed PowerDVD but without any change in the symptoms.

  Can someone help with this problem? Well, I'm stuck on this one like blu ray readers are not my strong point in computers. Maybe HP (in their wisdom) printed a digital brand on the device which prevents him from being compatible with more recent versions of windows? I talked to HP however my warranty has expired I do not pay £15 for a fool to tell me to come back for win vista (which is the worst OS known to man kind) or that there is no solution available. Help, please?

  Hello

  After writing this last post, so I decided to download Nero Info Tool to look at information from drive etc.

  The program asked if I could put in a disc to test the speed of running, so I thought... what the hell I'll put in a blu - ray disc and see what happens.

  Next thing I know that running speed test took place then everything suddenly the blu ray kicks in life and he was here... smooth as the more calm waters, known for the kind of man... my blu ray film.

  Reboot the machine and now the blu - ray player works fine. Any idea on what just happened?

• Pilot missing after upgrade to Windows 7 64-bit on dell xps 1340

  Installed Windows 7 64-bit on Dell XPS 1340. Most of the drivers/hardware work. A system of still unidentified Base and Windows update device / driver downloads dell cannot fix.
  State of the device - drivers are not installed (code 28)

  name of the physical device object - NTPNP_PCI0024 to bus PCI 1, device 7, function 3

  Hardware PCI/VEN_1180 & DEV_0592 & SUBSYS_02711028 & REV_12 ID
  etc.

  Help, please. Thank you

  Hello
  Here is the site of Dell support for your model. You will find all the drivers for Windows7 64 bit.

  Hardware PCI/VEN_1180 & DEV_0592 & SUBSYS_02711028 & REV_12 ID
  It is the Ricoh card reader .

  Driver so that it is on your article of chipset support site.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• No sound after upgrading to windows 7 32 bit to 64 bit

  A few months ago I upgraded from 32-bit windows 7 to 64-bit windows 7. After update there is no sound coming through my headphones or speakers and the icon at the bottom right of his says no audio output device is installed. I have an external sound card...

  You will need to provide more detailed information to allow a person to better help you, brands and models, etc. specific error messages/codes.

  However, have you checked with the audio device manufacturer to see if there are any W7 64 bit specific to install drivers that are needed for this? Check on the devices support site to see.

  Alternatively, it - http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 can help.

• HP Pavilion dv7 7077ez wireless for windows 8 does not work after upgrade to windows 7 64 bit

  I have the broadcom card. I have try all the drivers and I still cant install drivers I see on household also setup.rul 342 of the installation error wireless start won't start. What should do?

  Hi Emilinator,

  More than likely HP won't to material support for Windows 8 on any system purchased before October 1, 2011.  Most of the Windows 7 drivers work in Windows 8.

  You can try this pagewhich provides measures to solve the problems of connection to broadband for Windows 8.

  Check out this page to see if your computer has been tested by HP with Windows 8.

  You can run the Upgrade Wizard, which will scan your PC and report on what is currently installed on your PC is compatible with Windows 8.  This guide was updated for Windows 8 provides lots of information which is needed for all those planning the upgrade.

  Good luck

• Word2007 hangs after upgrade to Windows 7 64-bit

  I recently updated my HP laptop (Pavilion 1017nr) with Windows 7 Ultimate 64 bit. The only problem I've had so far is that Word 2007 does not open. It crashes at startup. The specific message is: "Microsoft Office Word has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. Close program.
  I did the following input from the online HP support:
  Uninstalled MSOffice 2007 Ultimate
  Uninstalled all updates installed that are allowed.
  Analyzed with the tool switch/scannow SFC. No failures were found
  Restarted the system between each one of the foregoing.
  Reinstalled MSOffice 2007 Ultimate with another drive that moved to the origin
  Revisited the Windows Update Web site and reinstalled the pertinant to update for Office 2007 files.
  Several times between each one of the foregoing, I tried to start Word with the same original result. No changes have been affected by "solutions" above.
  What's next?

  André,

  SUCCESS!
  The OfficePlugIn.dll was the culprit.
  I finally found it in the subdirectory Adobe Contribute (C:\Adobe\Contribute\OfficePlugIn.dll). Deleting the file fixed the problem. Adobe Contribute has been uninstalled yesterday, but apparently not all the files are removed during the process.
  I'll start to reinstall the Adobe programs one by one and see what happens. I will keep you informed.
  Thanks again for all your time and effort. I really appreciate it.
  Dan

• Acer Aspire M5-481TG - card reader does not work after upgrade to Windows 10

  Hey!

  I can't get my card reader works after upgrade to windows 10 64-bit...

  Device Manager gives me return error Code 48, tried to install different drivers, I have found for Realtek PCIE Card Reader... None of them work...

  "Code 48: the software for this device has been blocked from starting because it is known to have problems with Windows.

  Have you ever tried the Realtek website?

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  Please uninstall the driver installed before installing this, on right click Device Manager, choose uninstall, and check the box uninstall the software too.

• Cannot print after upgrading to Windows 10

  Pleae help, I can't do my printer print after upgrade from Windows 7 to WIndows 10.  I have a HP officejet Pro 8600.  I downloaded a new drivers, etc, and nothing works.  Help, please

  Hello Kathy,

  http://support.HP.com/in-en/drivers/selfservice/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series-N911/4322914/model/4323658

  The link will help you to download the latest drivers. Make sure that your operating system indicates Microsoft Windows, Microsoft Windows 10. If it shows any other OS, please click the Edit link to the right and select Windows 10 in the menu drop-down, and then click Update. After that Windows 10 if poster as your operating system, you can click on the download to start button to download the latest drivers. I hope this helps!

  Although I am an employee of HP, I speak for myself and not for HP. * say thank you by clicking on the "Bravo!" Star"located on the left * make it easier for others to find solutions, marking my answer to"Accept as Solution"if it solves your problem.

• Connection problems wireless Broadcom 1704 after upgrade to windows 10

  Connectivity problems after upgrade to windows 10 intermittent wireless;  Have an Inspiron 5748 with adapter Broadcom 1704.  Driver is up to date: 7.35.295.0.  Diagnostic shows no problem with the unit.  Will be generally connect to the network, but the connection is deleted intermittently.  Troubleshooting to solve using leads to restore connectivity, but it will then drop again intermittently.  Never experienced problems before windows upgrade 10.

  steveshuff,

  Here are a few parameters to change on your adapter wireless for better performance.

  Turn on and off then on all devices on the network

  1. Turn off the power to the broadband modem and let the modem broadband disconnected for at least 3 minutes.
  2. Shut down all computers that are connected to the network.
  3. Remove power from the wireless router.
  4. Check that a network cable is connected the modem to broadband in the Internet or the wireless router's WAN port.
  5. Check that no series cables or USB are connected to the Modem on broadband.
  6. Connect the power supply to the modem broadband. Wait at least 2 minutes for the Broadband Modem to initialize.
     (If the Modem does not provide Internet connection successfully, unplug the Modem. Wait at least 5 minutes, then plug the Modem back.)
  7. Connect the power supply to the wireless router. Wait at least 2 minutes for the wireless router to initialize.
  8. Turn on the computer and try to connect to the Internet.

  Difficulty of wireless network connections

  Turn off airplane Mode

  For Dell Wireless adapters:

  1. In the Search box, type Device Manager.
  2. Press or click (Control Panel) Device Manager.
  3. In the Device Manager window, click on the sign of the arrow next to network adapters.
  4. Double click or double-click the Référence Dell Wireless WLAN Card.
  5. Click the Advanced tab.
     Note: These options are not available according to the installed wireless adapter.
  6. In the property: box highlight AP Compatibility Mode, select broader compatibility under value: from the menu drop-down.
  7. In the property: box, highlight the Minimum energy consumption, select disabled under value: from the menu drop down.
  8. Click OK.

  For me, to help troubleshoot, please click on my DELL-Jesse L and send me a private Message with the number of Service Dell and your Dell order number.

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• 700 - 230qe envy: after upgrade to Windows 10, I have no sound

  I have no sound after upgrading to Windows 10.  When I try to update driver I get error 0x8007001f Audio device IDT High Definition Audio CODEC.    Also get audio servicd without answering

  @gemini2

  Try this.

  1. Select the CODEC Audio IDT high definition in Device Manager.
  2. Select the driver tab.
  3. Click on update driver... button.
  4. -> Select Browse my computer for driver software.
  5. Select-> Let pick me from a list of drivers for devices on my computer.
  6. Select high definition Audio Device (not IDT High Def... that's important...) and click Next. Displays warning message, but the answer Yes.

  REO