Portege M700 - latest drivers Intel WLAN produce errors of JUDGMENT with Vista32

Similar Questions

• Portege M700 - need drivers for Windows XP Home edition x 64

  Hello

  I recently bought a Portege M700
  It comes preinstalled with Vista on the disc.

  Now, I got an original Win XP x 64 and all my programs are not really compatible with Vista. If I want to install Win XP x 64.
  I have install Windows XP Home edition x 64, but there are no drivers for it, only for drivers vista and Windows XP tablet pc edition.

  Is it possible to find the drivers for Windows XP Home edition x 64?

  Someone at - it already had a problem like this one?

  in any case thank you already for the answer.

  Hello

  I doubt that you can get 64-bit drivers for Windows XP for this laptop from the Toshiba driver page.
  I didn t find drivers for Windows XP 64 bits for Toshiba laptops.
  Why? I think the Win XP 64 bit was not so popular like Win XP 32 bit and most of the applications have been designed for XP 32 bit OS.

  If install you XP 64-bit on this computer, you will have to look in the various 3rd party Web sites for the compatible drivers

  Good luck

• Portege M700 - fan is always on

  Hello

  I have a new Portege M700, model No. PPM70E-01D01CSP bought in Spain (included with Windows XP).
  My problem is that the fan is always immediately and quite noisy. In addition when it ramps upward on AC it never ramps down, even when the processor gets to a cool 35ºC.

  If I reboot the ramp fan, although he never stops.

  I tried to change power management settings, and several programs for windows and linux that claim to control toshiba fans, but him don't work in my tablet.
  I find this very annoying, because I bought this computer because the reviews said it is extremely quiet.

  Any help?

  Thank you.
  Fernando.

  Hello

  What operating system do you use? It is Win XP?

  So usually the Toshiba Power saver must be preinstalled on this laptop
  You will find options such as method of cooling, CPU speed and CPU control method.

  Try changing the method of cooling to a lower performance. This should decrease the speed of rotation of the fan.
  In addition, I would recommend reducing the processing speed of the CPU.
  This would help reduce the heat and cooling modules should work slower.

  Good bye

• Portege R200 - Chipset Intel 915GMS - ialmrnt5 error

  Not sure if anyone can help, but I get the dreaded error ialmrnt5.dll and sometimes a blue screen. I am running windows XP - Pro and it seems to happen randomly at least 3 times a day, but showed itslef in:
  * windows Explorer when you create a new folder / change a folder name
  * word 2003 when you type in a document
  * excel 2003 when you type in a workbook
  * outlook 2003 when selecitng a contact to send an e-mail
  The laptop is under warranty and returned, but the ASP that provide support for laptops Tosh performed a test of impregnation and cannot recreate the error.

  I tried the latest drivers from the site of support of Tosh & Intel site, tried disabling hardware acceleration (as suggested by the Microsoft site) and even tried installing Vista Ultimate, but I get the same error.

  Are there additional suggestions?

  Post edited by: Admin

  Hello

  I guess that the service has tested your laptop with factory settings. Usually they built in HARD drive clean and install recovery image and do a test.
  If you google a bit around you will find a lot of different forums and tons of reviews where people write about the same question. Have you ever read some of them?

  I know it's the radical solution but maybe you should back up your data, install the OS by using recovery media and the problem should be solved. You have already tried driver Toshiba and Intel.

• Portege M700 - Modem UMTS Novatell missing drivers for Vista 64 bit

  Hello

  are there drivers for the UMTS modem yet? (I have found that none on the Toshiba download site) It's the only thing that prevents me from using a Version of Vista 64 bit on my Portege M700.

  Could you (guys from Toshiba) please release the 64 bit Vista for the Novatel UMTS modem drivers?

  Thanks in advance,

  Matthias

  Hello

  You are right. Novatel Wireless Mobile Broadband Drivers and TOSHIBA 3 G RF Power Control Utility are not available, but maybe you can check if Vista 64 - bit DVD recovery exist for this model of laptop.
  Check it out under the https://backupmedia.toshiba.eu/landing.aspx

• Portege M700 - 116 BIOS update error

  HI, I have a Portege M700 - 116 with Vista Ultimate SP1. And I download a BIOS fresh (P005Bv160.exe) [http://ru.computers.toshiba-europe.com/] date of 1, 60 - WIN version 10/10/08. When I try to install it, I get an error window saying:

  Unsupported product type is installed.
  Package BIOS BIOS version: Ver.1.60
  Current BIOS version: Ver.1.50

  So my question is... WHO IS WRONG? What type of product? This update of the BIOS is OS independent and independent language (world-wide), so I think that a lot of people with M700 will have the same problem. There is some problems with the previous version of the BIOS? I downloaded compared to the same month of site there. I do not understand, Setup the BIOS for Windows was made to make the process easy, but it doesn't even...

  Hello

  I see you are using Vista Ultimate.
  I doubt that there is an original version of Vista pre-installed.

  Error message: type of product does not support is installed, said the product (OS software) that is installed is not supported by the BIOS. I think that the error is related to the ultimate Vista preinstalled. Perhaps the BIOS may not be updated under Vista Ultimate.

  It would BE very interesting to know if you can update the BIOS runs Toshiba preinstalled OS.
  Should check this out!

• Recovery DVD does not work on my Portege M700 - 1F-3FFF-0000 error

  Hello

  I'm trying to restore my m700. However, whenever I try to use my recovery discs, I get this error with the text "this product is not supported.
  I tried to update my Bios Version 1.3 to 1.7 and had the same kind of message that "this product is not supported.

  What is the problem with my Portege M700, and how can I fix?

  (1) do you use Portege M700 recovery disks? Records of the other models will not work.

  (2) a laptop already under repair (for example, a motherboard replacement)? Perhaps the information system was not updated by the repair center.

• Portege M700 - problem with Dynadock

  I can not change the resolution on a screen connected Dynadock and cannot save the display settings of all - how to fix this?

  I have a Portege M700 running Vista Professional SP1 - mainly the machine is used as a desktop replacement, connected to a screen Viewsonic 19 "wide through the Dynadock DVI - when it is connected so I have the laptop screen is off and use only the Viewsonic at a resolution of 1440 x 900. I had been bothered by the fact that whenever the resumption of the screensaver, the resolution would drop down to some lower State (I was not able to identify the dimensions he thought he was using but probably 1280 x 800, the default resolution of the internal display).

  I tried to solve this problem with the technical support level 3 without success. I thought I was smart and try to install the Intel Graphics Media Accelerator Driver update that is located on the Intel Web site (if you're just trying to install this software, Vista won't let you, but if you unzip it and manually update the drivers it works). This resulted in the connected screen Dynadock is off completely - no signal! So I uninstalled the drivers, reinstalled the drivers Intel original, but now, I have no the ability to adjust the resolution on the Dynadock login screen - and it is defaulting to something that's not going to (too broad and not high enough)!

  I lived several cycles to uninstall and reinstall the drivers for the graphics card (Mobile Intel 965 chipset) and the Dynadock; I updated the drivers Dynadock with the latest download from the website of DisplayLink, tried all sorts of drivers for the monitors associated with DisplayLink, tried several restorations system (which have all failed, which was also quite disturbing but less than an immediate concern), etc. Through all this, there is absolutely no way to choose the correct resolution of the screen through the display properties (my choices are 800 x 600, 1024 x 768 and 1280 x 800), and even simply activate an additional screen translates to nothing happens - the new settings do not stay after hitting "Accept" or "OK". I thought that I had licked when I realized that I had to uncheck "Extend to this monitor box office" to screen internal laptop - indeed I was then able to choose 1440 x 900 for the Viewsonic and everything was good, but everything came back after reboot. Of course, now when I try to repeat, I am unable to uncheck this box not more for the internal screen (well, actually, I can uncheck, but when I hit "apply" or "OK" it simply gets selected again).

  All this comes after I spent weeks trying to get this machine to work with the port replicator, which also did not work - a problem that appears to be from an incompatibility with Vista display card drivers and the port replicator (would have been nice if it sales had told me that when I bought the thing, but I digress...)

  In any case, it seems, as it is a Vista problem, I've seen this question asked of other portable devices vista and displaylink other advice, but I know it's possible to have a working reasonably OK solution since I've had one before I went and it messed up trying to work perfectly. Serves me right for spend 3 k $ on a machine and expected that it works as described, I guess. If anyone has any ideas... my next step is probably a downgrade to XP Pro, and then if that does not work, I'm tempted to break into pieces. Or, if someone's figured out how to get the port replicator to work with a M700 Vista, which is actually a better option for me...

  -Tony

  Hello Tony

  It's a very long story, but I use Portege M700 with Dynadock DVI (PA3542Y1PRP) and have no problem at all. After reading your ad I tried changing all the display options and I didn t notice something strange. It works well.

  Read your ad I see you tried to install different things and I wonder not to have so many problems. The best solution for you is to install the new OS using recovery image. Do the clean install of OS and install later Dynadock Utility 2.3 c. be careful while installation is running and do not interrupt the procedure of facilities. Make sure that all software components are installed correctly.

  When you start installation Dynadock Utility Dynacock can not be connected. When you see the window where you will be asked to connect Audio device USB connect the Dynadock to the USB port of your favorite. I use the USB port on the back.

  I use the external display to monitor LCD 22 with a resolution of 1680 x 1050. In the settings screen is display number three and when I click on it I can set the resolution to the maximum level (native resolution). The image is perfect.

  I tried the same as you:
  -Set the external display as primary monitor (for computer laptop LCD was OFF)
  -J' have enabled screen saver and tested several times, but the resolution is always the same no changes at all the
  -With these settings, I rebooted the phone several times as well as the resolution was still the same no problem at all

  After reboot, I can see the image on the notebook LCD only, to the point where I have to write the password that I can see the same image on laptop LCD and external monitor. A few seconds later, the image is switched on external monitor only and it is the same thing you want to have. The resolution is the same again (native resolution). No change at all and all seems OK.

  At the end I've switched back to the LCD display only. It is also interesting to procedure. As a first step, you click on display number one and activate extended desktop. After that, you will be able to use the option to change the primary monitor. A little strange to me, but OK.

  So everything works well for me and for you I only see an option. Reinstall Vista, install new utility Dynadock (new installations) and test again.
  One last thing: do not connect Dynadock on different USB ports. Use always the same.

  Bye and good luck!

• TrueSuite Access Manager on Portege M700 - 13p

  Whenever I start my new Portege M700 this program says that the drivers are not installed for the fingerprint reader and t testing install again. Install TrueSuite Access Manager starts and then it asks me to restart my PC. Every time. I'm currently ignoring this but it bothers me.

  I can connect with the fingerprint reader, which suggests that the message is bogus.

  Recommend a way to solve this problem?

  I'm tempted to remove the device from the hardware Manager and uninstall the software, then restart, reinstall the software and then redetect the hardware...

  Anyone got a better idea before that I'm wasting my time?

  See you soon,.

  Rob.

  I agree with you and I think that the first step, you can try to remove preinstalled software and install the latest version of the Toshiba support page.

• Portege M700 falls down after upgrading to Windows 7 32 bit

  Dear all,

  My portege M700 laptop played most of the reliable time.
  However, it was taken very slow sleep after a few iterations of sleep-wake, taking > 5 min.

  I have now installed Windows 7 32-bit, which works very well. Has no problem with the release of sleep. However, on 1-2 times per day now, I get a message that Explorer crashed and must restart. About once a week, the system crashes completely with a blue screen of windows (without core). Most of the time, in seconds to the time that the screen freezes, I hear the fan switch on at full speed (much faster that it never runs normally) and the case becomes hot enough.

  I installed the latest drivers for 32 bit Windows 7 on the site of Toshiba UK.

  Can someone help me to diagnose the cause of these accidents?

  Thank you very much

  Chris.

  Hello

  It is difficult to say what might cause this behavior strange system.
  But you said something about the hot deal and fans begins to spin faster

  It seems that the internal temperature of laptops increases to a higher level.
  A higher temperature may affect the RAM modules and this could be the reason why the system hangs and does not answer.

  What to say that you should check the Win 7 power management settings.
  There are many options that could decrease the performance of the processor and increase the cooling.
  In addition, you should check if the cooling fans are free of dust obstructed fans might not run properly and this would increase the temperature as well.

  Hope this helps you

• Portege M700 Wacom does not respond after hibernation

  I've been using the M700 for two months and I met a very annoying bug. It is not mentioned in this forum so far, but there are other reports on the Internet who mention this problem too. (http://forum.tabletpcreview.com/showthread.php?t=16902)

  * Question: *.

  Tablet is placed in hibernation. When he wakes up, everything seems OK. When you use the stylus or the key functions, that the cursor does not move. Tablet and pen services have not crushed, but there is no link between screen/digitizer and software.

  + Technical support +.
  The series/USB connector is not reset after waking or hibernation is dead the serial connection

  * I tried solutions *.
  So far, I have reinstalled Vista, tried XP (and will stick to it because it's a better OS in many cases) and have reinstalled all kinds of drivers Wacom.

  * What we want *.
  Wacom has also seems to be aware of the problem but says it's a matter of Toshiba. I am impressed with the construction and the quality of the M700 (it is a replacement for my robust but now almost unusable M200 and I have a M400 too, but I never liked it) and this issue is the only glitch I meet.
  I would like to know if anyone else in this forum has experienced a Wacom-coma after the resumption of the hibernation or standby, and if so, if they have found a solution (apart from restarting their PC)

  And I would really like a response from a representative of Toshiba review of this question.

  Hey Buddy

  I m not a M700 owner and, therefore, I can not say much about this issue, but to my knowledge, there are a few different problems with Vista and hibernation mode.
  For example, device high definition audio, screen WLan failed after the resumption of hibernation.
  These issues were definitely Vista problems.

  Installed on Portege M700 Tablet d River was developed by Wacom, I wonder why the guy States that it is a Toshiba issue?  :| (perhaps because this Toshiba laptop s ;)))

  Anyway, you said that you have reinstalled the driver for the tablet of the Toshiba page and updated the Vista of the State. Check the BIOS updated maybe he could improve the functionality

  If this does not work I recommend you contact the ASP to find out if there is a known issue

• Portege M700 searching for Mobilink ConManager be used with Windows 7

  Hello

  I upgraded a Portege M700 Notebook Vista (of recovery) for Windows 7 (32 bit). Most of the devices and drivers where found and assigned automatically in the installation process, some more later with the Toshiba/Microsoft software updates. Also the driver for the Modem 3 G integrated has been installed and says "working properly".

  Feature: "SM Bus Toshiba broadband (3G HSDPA) minicards Modem.
  Pilot: "Novatel Wireless Inc." / version 3.0.0.3 / Date 14.09.2006 (signed by Microsoft)

  But I can't find software for Windows 7 to make use of the modem (establishing a connection)
  Formerly "Mobilink connection manager' does not show upward in the Toshiba download page (Windows 7) and the old version (VISTA) does not (stops without error message installation procedure).

  Y at - it no hint how to establish a connection 3G with the M700 (Win7) or a link to a working version of the Mobilink for Win7 connection manager?

  Thanks in advance...
  Peter

  Post edited by: Riedel

  Hello peter

  You have upgraded to Vista preinstalled or you have installed your own own Win7?

• Portege M700: Cannot use the fingerprint reader after update for Firefox 3

  Hey

  I have a Toshiba Portege M700 Tablet and with the truesuite software on a fingerprint reader and password Bank plugin.

  It's all working fine and dandy with firefox 2.
  Then last night I went and updated for firefox 3 and now I can't log in to Web sites with the fingerprint reader.

  No error messages, nothing. I can say that the truesuite or Bank password software is not detecting firefox 3. I've updated to the latest version that I could find, 2.0.2.0.

  I found this thread by telling me the process of update of firefox it breaks and I should completely uninstall and reinstall firefox, which I did.
  That didn't fix it.

  Then I completely uninstalled and reinstalled truesuite. That did not help either.
  Its still broken.

  Anyone know a workaround or a way to fix this, or should I wait and see if there is an updated version of the password database? (I find it unlikely because this isn't really a standard program)

  Hello

  I think that the new Firefox version is not fully tested and possibly it s not completely compatible with the 3rd party applications.
  I remember the same problems with older versions of firefox. Finally, it has been resolved.

  But why you don t use internet explore? As far as I know the fingerprint works without a problem

  In any case if you want to continue to use the browser firefox 3 so I think that the only solution is to wait for an update.

  Concerning

• HP Pavilion - 550-259na: Intel WLAN Driver SP74163

  Tried to install this driver from the tab updates from HP Support Assistant.  Installation failed repeatedly. (Error - failed installation.)   How to perform a successful installation?

  Down pipe

  Looks like you are trying to install the wrong driver.

  Looking at the page HP drivers for your PC Win10, I don't see this softpaq for all Intel WLAN driver.  Instead, I see the sp72159 softpaq.

  This page is here: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-550-200-Desktop-PC-series/9259612/model/11413200

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Portege M700 - registration - product number is not available in my area

  I just registered my M700 to obtain updates to support, because I have seen that some updates were issued, that I have not talked to me.

  When I sent the form, he told me that my serial number was registered. I thought that I had recorded before, but my user name is not recognized.

  On my home page, when I click on Portege M700, it tells me that the product is not available in my area.

  The laptop was provided by my insurance after my old was fixable.

  How can I have a product that is not available?

  Why am I not receiving updates if I'm already registered, or why does say that I signed when I'm not?

  Thanks for any help...

  Hello

  Toshiba offer own portable series for different countries.
  I think that your Portégé M700 series was delivered in different countries under different model numbers.

  What model of laptop is it exactly?

  In any case all latest drivers for Portege M700 are available on the European driver Toshiba page

  If you can also download it from this page:
  http://EU.computers.Toshiba-Europe.com/-> support download &-> download drivers

  Concerning