Portege M700: Message DEP, saying he has turned off the Tablet PC Component
Windows Vista Business SP1 is intermittently during starts with a message DEP saying it has disabled the "Tablet PC Component". Unexpectedly, this happened 5 times in the last 3 days. Once it happens, data via the touchpen entry and writing entry tool no longer works correctly.
I reported this to the Toshiba UK support and they told me to restore the system from the recovery - disk
Are you serious? It's what - after I spent almost 4 hours updating the BIOS, Windows Vista SP1 and MS Office then set up Outlook for Exchange server and HSDPA too?
Looks like there is only not all tested against Vista and Office upgrades...
Should I turn off DEP?
Hello
You can still leave the active DEP but could add the Tablet PC Component (touchpen) to the list of applications that are ignored by the DEP.
You could do this in:
Control Panel-> system-> system settings-> advanced-> first button settings tab advanced-> last tab Data Execution Prevention (DEP)
Here, you can choose the second option and could ad the touchpen (exe) to the list
Tags: Toshiba
Similar Questions
-
My cat has turned off the touchpad on my laptop. How do I turn it back on?
He jumped on the keyboard and turns off the touchpad. He has done it before and I was somehow able to put on the. I forgot how. I now use mouse and don't like it.
Fantastic! I finally looked more carefully the signs/pictures on the keys of the laptop, and of course he was there. I was beginning to think that this kitten was smarter than I am. (it is probably still) He knew how to turn off twice and I couldn't turn it back this time. Now I see how easily it turns off when he walks on the keyboard. Thank you very much. Maureen
-
I'm on resolution 5, I used four different resolutions and none of them work, and I do not understand how to apply the meanless 5. Resolution 5
Turn off the connected BlackBerry smartphone advanced power management features. For more information about how to disable the USB selective suspend feature in Windows, visitMicrosoft Help and Support site and search for "disable usb selective suspend."
See if http://support.microsoft.com/kb/902274 help--..--"andresgn" wrote in message news: 9754 c 356-97ed-4b9f-8dc5-c3318a6dc60b...> I'm on resolution 5, I used four different and no resolutions are> work them, and I do not understand how to apply the meanless 5.> Resolution 5> Turn off the connected BlackBerry advanced power management features> smartphone. For more information about how to disable the selective USB> suspend functionality in Windows, see the Microsoft Help and Support site> and look for "disable usb selective suspend."> -
MY mini iPad has continued to send messages and facetime. I turned them off and back on. Then to connect at the same time. Then only got "check". Does not further. It has worked well for many years. I was using a wifi hotel overseas when this happened. Ideas please use iOS 9.2
Lesley Hello,
I understand that you're stuck with checking iMessages and FaceTime on your iPad. Let's see if we can get smooth it.
Now it may take up to 24 hours to activate, but this isn't always the case. Now if she still not active then take a look at the article below for more details on what to do. You may need to contact the Apple Support for assistance.
Take care
-
Turn off the tablet of the opacity of the brush control
Hi, I have a Wacom Intuos3 tablet that I use with Photoshop CS5 Extended. I want to have a brush that changes size (dynamic shape) with the pressure of the pen, but I want than to stay in a solid 100% opacity.
It looks that the opacity of the feather is controlled under 'Transfer', so I'll try to disable it, but as soon as I start drawing, the transfer settings comes back on and pen opacity is turned on again. How turn off and hold it?
I used to be able to do it with Photoshop CS4, but I don't really understand this new interface of CS5 brush.
The usual cause of this in cs5 is to have the opacity of the brush Override enabled.
There are two buttons on the toolbar options, we substitute opacity and the other
size of oveverrides.
Try to click the opacity of replacement brush off and see if it makes
a difference.
MTSTUNER
-
I get a message telling me go download 1 update and do not unplug or turn off the computer.
I get a message not to unplug or turn off the computer until 1 update is complete. After 3 hours, the same message appears and nothing has been updated. WHA'ts the problem? Thanks-John
Please provide more information for your issue to be diagnosed.
Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.
Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.
Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.
To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.
For assistance OneDrive see paragraph 9.3:
-
I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired. How can I fix it?
Original title: network programs network networking Internet Web site Site Web Web Site URL
Hello
You need to support iPad not Microsoft.
iPad - media choices
http://www.Apple.com/support/iPad - Support
http://www.Apple.com/support/iPad/iPad - communities (Forums)
https://discussions.Apple.com/index.jspaI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I'm trying to convert a PDF to word document, but get a message that says reader doesn't have the ability to access this service.
I have done this many times before, but seems only the last days he began to happen...
Sue
Hi suee63752152,
Make sure that you have the latest Adobe Acrobat Reader DC (Adobe Acrobat Reader DC install for all versions) installed on your computer to use the services to create a PDF file as the old version of Reader support any more.
Alternatively, you can use services online at https://cloud.acrobat.com/convertpdf
Let me know if you are still having a problem.
Kind regards
Nicos
-
All lights on screen Flash - Message - Please turn off the printer and turn it back on
I'm fighting a problem for a few weeks now with all the lights on the display starts flashing and the message please turn off the printer and turn it back on. HP sent me a new printer that does the same thing. The printer is an Officejet Pro 8600. My computer is Windows 7. I use a Belkin 750 db wireless router. I talked to the service the customer several times with no results. Did a hard reset of the printer, change the SSID of the router, because I think that one of my neighbors has the same router. The thing most effective I did was change the channel to 6 which will operate for several hours until the display starts to Flash again. Channels 1 & 11 starts blinking after a few minutes. I know there are other people who have had the same problem. I'm about to throw the thing in the trash. My last printer brand X was set up the same way with no problems. On the network, there are 2 iPads, smart TV, and an iPhone. Need help please!
Super Dave
Ethernet cable and connection with correction of the problem. Its been 2 days and the printer worked perfectly. Please pass this solution on your technical telephone support staff because I know that there are others with the same question. Thanks for your help.
-
The new App Store for El Capitan update has locked up my macbook pro. Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't. How in my machine to begin troubleshooting?
The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.
Start by:
Reset the PRAM and NVRAM on your Mac.
MacIntel: Reset of the controller (SMC) system management
Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.
If you are unable to start;
Reinstall El Capitan without erasing the drive
Please make sure that you back up.
- Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
- Select disk utility, then click on the continue button.
- Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
- Click first aid icon in the toolbar. Wait until the button is active, then click it.
- Quit disk utility and re-enter the Utility Menu.
- Select Reinstall OS X and click on the continue button.
Also, see this tip for user: basic steps for the OS X upgrade.
If this doesn't get you;
Install Yosemite or El Capitan, from scratch
Backup if possible before proceeding.
Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:
Select utility disc in the Menu Utility, then click the continue button.
When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.
Click Delete in the main window of disk utility. A panel will fall.
Define the type of Format Mac OS extended (journaled).
Click on the apply button, then wait for the done button to activate and click on it.
Quit disk utility and re-enter the Utility Menu.
Select reinstall OS X and click on the continue button.
-
Portege M800: How to turn off the LED light of the multimedia and the touchpad?
Hello
I have Toshiba Portege M800.
I want to know, how can I turn off the light of multimedia and the touchpad
Thanks in advanceHello
I m not M800 owner but I ve got an another Toshiba laptop and these LED lights I can turn market in the BIOS and in Toshiba HWSetup.
The HWSetup is placed in Toshiba help optimize them and the settings are in the tab 'enlightenment '.See you soon
-
My 5s torch lights up when a message arrives... How to turn off the it
My 5s torch lights up when a message arrives... How to turn off the it
Check: Settings - general - accessibility - Flash LED for alerts = Off.
-
My computer operating system Mac Pro OS X EL Capitan 10.10.3, ink 13"early 2015 screen off for a few seconds and back on without turning off the unit.
This has happened several times, regardless of the period in which stays on.
Don't know what is happening with your publication details. You posted in space of the Macbook Pro forum & even your profile indicates: ' MacBook Pro (retina, 13-inch, early 2015), OS X Yosemite (10.10.3)..
Your post indicates you are using a Mac Pro, which is a desktop computer and with the help of El Capitan who is 10.11.2 not 10.10.3 which is Yosemite - 'my computer operating system Mac Pro OS X EL Capitan 10.10.3.
-
Get the message: do not unplug or turn off your computer-install updates 1 of 10
Original title: closing
For the past 10 times, I stopped, the message "don't disconnect or turn off your computer-install updates 1 of 10" or other similar term. What is c?
Hi bloviater,
1. the updates you are trying to install?
If you are unable to enter the Normal Mode, then try Safe Mode system restore.
Method 1:
Step 1:
You can try to start in safe mode and check if the problem occurs.
Check out the link for more information on starting your computer in SafeMode below:
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2:
If you can start in safe mode, then try a system restore to a previous point where you have not experienced the problem.
Note: When you do the system restore to restore the computer to a previous state, programs
and updates that you have installed are removed.
To run the system restore, you can consult the following link:
System restore
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Method 2:
When you are able to boot into normal mode, try the following steps.
You can read the following article and try to reset the Windows Update components and check.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Original title: my pc splash screen has turned off by itself, I tried reinable it, but it doesn't it only highlighted more why?
I went to dell.com and downloaded an audio device and after I did that my audio device has disabled itself.
Hello
Did you do the changes on the computer outside of download sound card drivers?
Step 1: Roll back the driver of sound card and see if that solves the problem of the sound card.
HOW TO: Use the driver roll back feature to restore a previous Version of a device driver in Windows XP
http://support.Microsoft.com/kb/306546Step 2: See the following article to resolve the problem of sleep.
How to solve the problems of hibernation and standby in Windows XP
http://support.Microsoft.com/kb/907477Step 3: Disconnect all external devices connected to the computer, and then verify if the standby key gets activated.
Let us know if this helped.
Maybe you are looking for
-
I'm on windows 8.1, and firefox worked fine yesterday. Today I can't move the window, reduce, enlarge and close without end of tasks, tried refreshing, reinstall. Still nothing. The only addon I ever is adblock and when retired that didn't fix it eit
-
How to enable NAP protection without buying Norton?
Hi guys iam not the smartest tool in the shed did not use long computers, I'm running Microsoft security Essentials and windows firewall, get boring people, trying to get me to buy $400. NAP because mine is not activated, can anyone who is computer s
-
I just had to re - install Windows XP Professional w / SP1a. I can't manually find SP2 in Windows Update because XP is not up-to-date and it tells me to turn on the automatic updates. The only version I find is for professionals and Windows Update te
-
I was told today that I need more ram. I have gigb. My Task Manager indicates that I use only 6.9 but I only 0 free. where the extra 1.1 GB go and do I need to get more.
-
OK, now here is the problem. My laptop dell Inspiron computer running windows vista will be randomly blue screen of anywhere between 15 minutes of use to 6 hours of use. It is very important for me to have my laptop works well, I reinstalled my OS an