Portege M750 - 2nd HARD drive in the Bay select instead of optical drive carrier

I just bought I used Portege M750 because my M700 was broken. Unfortunately, the berries to choose between the two models are not compatible. Although the availability of a 2nd drive hard trolley is mentioned in the user manual, I couldn't find the part of the disk for the M750 caddy. I tried a standard SATA-SATA HARD drive caddy, but I get a message "select Bay error" at the start, although the caddy runs under windows, as long as you do not hibernate.

Does anyone know the part no of the real 2nd hard drive for Portege M750 caddy / M780? Or is there another 2nd carriage of hard drive that works with the M750 without restriction?

Hello

I guess that you will need a hard drive caddy part number: P000452980
Then you could place this in the Toshiba Ultra Slim PA3408U-2CTE and PA3408U-1ETC HARD disk adapter

But you can also contact the Toshiba ASP in your country to get a confirmation...

Tags: Toshiba

Similar Questions

  • Re: Satellite A660 - 2nd HARD drive instead of the CD/DVD drive

    Hello

    I found a few solutions to this problem ([solution | http://www.newmodeus.com/shop/index.php?main_page=page&id=7&chapter=0]), but none of them are dedicated to A660.

    There is no device dedicated to tosiba a660?

    Thank you.

    Hello

    I know Satellite A660 can't stand not a thin Bay select only some models like the M400 Portege, Portege M750, Tecra M9, Tecra S3 or S4 Tecra, Portege M700 support this feature

    So 2nd HARD drive instead of the CD/DVD drive does not seem to be possible

  • No satellite P770-111 no SATA cable to connect the 2nd HARD drive

    Hello!

    I bought by Satellite P770-111 3 days and was hoping to insert another HARD drive that I had in my old laptop.
    OK, I opened the plastic cover on the bottom side of the laptop and there are 2 slots of HDD (2.5 ") but a single HARD disk.
    A HARD disk that is currenty in the laptop's big 500 GB. I would like to install another, but there is a problem:
    There is no cable to connect it to the motherboard SATA.

    Basically, there are 2 slots hard drive but only a connection interface. Could you please tell me how could I install a 2nd HARD drive?

    Thank you in advance!

    Damjan

    > there is no cable to connect it to the motherboard SATA.
    The fact is that not all laptops of the same series of notebook models are equipped with the same motherboard and controllers of same.
    This means that even if there is a second HARD-drive Bay, you will not be able to use a 2nd HARD drive. You know

    The chassis is the same in all models of laptops but there are different motherboards and not all supported 2nd controller.

  • HP pavilion G4-2201tu: Add a 2nd HARD drive using CD/DVD optical drive Bay

    Hi ch, I, m going to add a 2nd HARD drive of my laptop bu using Bay, CD/DVD optical drive, so I don't know if the connection of optical drive supports SATA 2 or SATA3? And where I can buy a Bay for disk HARD 2 (good quality)? TKS a lot!

    There is that some members have used and reported success with third party products. I can't recommend any particular HARD drive caddy product as I have no personal experience using one. I can provide you with a URL so you can decide for yourself. I will update with more sources as I find them.

    http://hddcaddy.com/en/12-HP-HDD-Caddy

    http://www.newmodeus.com/shop/?Main_Page=index&cPath=2_27

    Your laptop uses a SATA interface for the HARD disk and the optical drive.

  • DV7-4280us - Bay of disk HARD 2nd vacuum has no visible connection to a 2nd HARD drive.

    My laptop Pavilion DV7 and previous DV8 had two bays for HARD drives, one of them wired to a hard drive, but not containing is not a hard disk at the time of purchase.  I expect the same thing when I ordered this Pavilion DV7-4280us, which is, I think, made in China, but I have not the same.  This one came without visible connectors for the hard drive, I had already bought to install into the empty Bay.  My Technical Support call made me advice to buy a disc kit hard (with caddy & connections) from HP, as if the receive connectors were available in the drive Bay HARD vacuum.  I didn't not agree because (and the next two paragraphs I added so that the well-intentioned forum members continue to give me the standard answer for laptops which actually have the usual connectors & waiting in the drive Bay HARD 2nd vacuum.  I appreciate the two forum members who have offered help so far, but there is no need to waste more based on my failure to clarify the problem):

    There is NO METAL NAKED INTO THE BAY VOID that COULD CONNECT a HARD disk.
          UNLESS A NEW CONNECTOR GOES TO THE MOTHERBOARD HARD DRIVE, IT IS USELESS FOR THIS COMPUTER.

    Each HARD drive connector I've seen only connects the HARD drive to a connector in the HARD drive Bay.

    The connector of the latter reaches the motherboard, and that the connector does not exist in this 2nd computer HARD disc Bay.

    Even if I could get a cable to connect a HARD drive to an unused connection & waiting on the M-Board, I can't M-Board.  M-Board is inside a barrier which could be called the bottom of the laptop - external surface of the portable computer.  (Battery and bays for HARD drives are outside the confines of the current computer, the value in their own hollow spaces in the bottom panel, with secondary coverage on the hollow spaces, i.e. the bays for HARD drives and storage media).  I looked for a way really open the casing and expose the M-Council connection for 2nd HARD drive (IF it exists); but I didn't know how to do it.  It is clear to me that this is not intended to be a facility run by the user. But I would if HP (or maybe even a 3rd party who made it) provided some good instructions.

    I'd like to think that HP did not make this change to the line DV7 laptops to double HARD drive, and that the Chinese manufacturer made the change without approval or even knowledge of the management of HP.  I want to believe that because he was, at best, a really stupid thing for HP to the customers who pay for the best HP can provide.

    So my questions are the following:

    1. The motherboard in this computer still has the ability to manage a 2nd hard drive?
    2. If 'NO', then HP would be willing to take over this very disappointing computer in Exchange to a DV7 which is equipped with HARD drive connectors available in the 2nd, empty, Bay?
    3. If 'YES', then
    4. HP or someone else would be willing to provide connectors, and instructions for me,
    5. OR install the missing connection to the drive for me, Bay
    6. While, in both cases 4 or 5, I can install a HARD drive in the Bay, empty 2nd drive reasonably, I expected when I ordered this computer?

    All my apologies and thanks to KaLin0908, who responded so quickly and helped me realize that my original description was not clear enough.  I hope that my changes to clarify the problem have not ruined the tone of my call.  I'm aiming for "clear and grateful."  If this revision reads as Loud or Yelling or abrasive or anything else bad, I'd appreciate any suggestions to improve it.

    I have the same computer.

    At first seems like you say but

    If you look carefully the second Bay of hd, you will see 4 small holes

    Those who are for the hard drive caddy, you can buy that and it's expensive

    You should also buy a hd cable, but be careful, there must be about 5 inches long

    The cable for 1 hard disk does not work

    One end goes on the hard drive and the other going to the MB. The connection is planned

    for the memory modules

    The kit costs about $ 45. If bought at hp and about 35 if purchased by another company

    http://www.newmodeus.com/shop/index.php?Main_Page=product_info&products_id=345

    This will give you an idea of where/how the screws connect to the caddy

    4. connect the hd to the caddy /ssd

    4. connect the housing inside the laptop

    http://www.dectrader.com/605415-001-new-HP-HDD-hardware-kit.html#.ULTmVNcew1w "

    Almost the same video

    http://www.YouTube.com/watch?v=EZgiX-pzdL8

  • How to use the 2nd hard drive internal for storage?

    Hi, I am a newbie in all of this. I would use the 2nd internal hard drive of our mac mini server (end 2012) for storage (in fact, I'll things rsync from a remote server to here. but this is not the point here.). The thing is, I don't know how to access the 2nd internal hard drive and where to start. I did all of the following commands in the Terminal, but I don't really know what they mean, and what can I do with this information. I've been Googling but most are guides on how to install a 2nd hard drive etc. I hope that the information below is enough for someone to give me advice please?

    Thank you!

    That shows disk utility?

  • 2nd hard drive for the Satellite Pro A200

    Hello

    I have the Satellite pro A200 (PSAE4E-03401FDU). The LT has an option for a 2nd hard drive, but it is not included a cable.
    Someone knows the reference to the 2nd hard drive cable?
    Thank you!

    Stand by.
    When you remove the HARD drive to the second HDD can see HDD SATA conector?

  • How to check if the 2nd HARD drive is possible on the Satellite Pro A200 PSAE7?

    Hello

    My A200/PSAE7 has a 200 GB HARD drive. For backup reasons, I would like to know - or learn to know how check - if my A200 already have the hardware support for a 2nd HARD drive, next to the slot for a 2nd HARD drive.
    In the BIOS, I see 'Toshiba MKxxx - hard drive' and 'hard drive - None '. Is the last entry in the BIOS is a sign that a 2nd HARD drive is supported and has to be put in the second location of HARD drive?

    Thanks in advance for any answer!

    Best regards
    Andreas

    You can do the following:

    Open the cover when the 2nd drive HARD so-called must be installed and check for some SATA connectors or cables. If there is an unused SATA connection so you can upgrade, if no, then you will need to backup your data on USB - HDD or whatever.

    If in the BIOS is something now, he won't say that he is physically present.

    Welcome them

  • Re: Satellite P300 - need support for the 2nd HARD drive

    Anyone know where to find support for a 2nd hard drive of my P300-17R laptop? Modelnumber; "PSPC4E-04701LDU.
    It must be sent to the Netherlands.

    Check eBay. You will find everything.

  • Pavilion 550-306no - for the 2nd HARD drive expansion slot?

    While thinking about replacing my old HP tractor, I browsed around the shop online for a possible new unit;

    Seems there is a box called Pavilion 550-306no, sold here in Sweden, which could meet my needs.  However, does anyone know if there is room (or not) for a 2nd HARD drive? Seems all the guides of the old user on how to develop yr PC in the forum of textbooks have been nuked.

    Concerning

    Hello

    The Specifications for the 550-306no indicate that it is not put into service for a disk hard 3.5 "2nd.  Review the information in the computer case.

    Some models will allow a 2.5 "HD or SSD to add.  See the image below.

    According to the amount of space available between the existing hard drive and the motherboard, you might be able to mount another HD using 3.5 media ".  Those that I had recommended in the past are now $40 (ouch).

  • Dimension E310 will identify the 2nd HARD drive

    I am trying to add a 2nd HARD drive on my Dimension E310 (WinXP Media Center Edition 2005) without success.  I bought a naked WD10EZEX and 1.0 TB SATA cable and have physically installed the drive and connected the power cable from Garland.  SATA data cable is connected to the SATA-2 port.  When I go into the BIOS settings, the original boot drive 80 GB is recognized but the second disc of 1.0 TB is not.  I turned on the port, but the disc ID says 'unknown '.  If I spend two readers autour, the first hard disk (CT 1.0) is recognized but the second disc (the original 80 GB) drive ID: unknown.  BIOS is version A03 (08/10/05).  What I am doing wrong or do I not have a defective SATA-2 port?

    Hi, Osprey4.  Thanks for your suggestions.  I tried to connect just one drive at a time for the second SATA port, leaving the first open port and got the same results.  No disc has been recognized.  I chose to not reset the CMOS.  It seems the second port does not work.  I can accept and manage with just one port I have available with the larger HARD drive.

    Thanks again for your support.  I'll mark this thread as "resolved".

  • Add the old computer as as 2nd hard drive to new XPS 8700

    Hello

    My old computer - Dell Vostro 410 just stopped working so I now have a 8700 XPS.

    My problem is that there are some files on my old drive hard vostro that I need. He has been using Windows 7 and the hard drive, I have upgraded to a Western Digital Black Caviar 1 TB SATA.

    But the new '' runs on Windows 8.1.  I can't upgrade the old hard drive to the old computer died. Someone at - it ideas how I can get my info from my old to my new drive?

    I tried to install the old disk until the 2nd hard drive but the system does not recognize it.

    Any help would be welcome.

    Thank you

    Hello and yes I have an answer.

    Also, I had a second drive win 7 ult and it went out to install in my new 8700 XPS thing is that I already formatted the disk to work to the point 8.1. He came to light, a UEFI system installed, may fail to start if a secondary drive is attached that contains logical partitions. Of course, this should be an MBR disk configured, but if it has at least one primary and one extended partition, it will stop Windows 7 and Windows 8 start.

    To correct this test facility 2nd main drive, then use a boot disk to get the computer running then access the disc to remove files.

  • Satellite A300-1J1 - how to install 2nd HARD drive?

    Hello

    I bought a Satellite A300 and I see in the workbook loads it is possible to add a 2nd hard drive. So I bought one and when I opened the box of hard drive, I have not found a connector to connect to my hard drive. I think I have to install a SATA connector, but I have not found a way to proceed.

    Thank you

    PS: Excuse me if you find mistakes, I don't speak very well

    Hey,.

    If there is no second SATA connector on the motherboard it s not possible to install 2nd HARD drive because you can t add such a motherboard connector.

    As far as I remember there are other threads on A300 and 2nd drive HARD here in the forum and the point is that all A300 using the same case for laptop, but the mothers are different. So you can have a 2nd HARD drive Bay but not connector.

  • Satellite P500-12D adding 2nd HARD drive

    Toshiba UK say it is not possible to install a second drive in a P500-12D.
    The reason seems to be that the "bowl" for the second disk drive carrier is not sold.
    I was also told that the second drive Bay could not be used "on the model" but the sata connection is there and inserts brass threaded in the case of the scree of the carrier are present.

    The Bay is deeper than 1 Bay (for the thicker > 500 GB drives and, therefore, the support unit for the 1st Bay can be used - entire centres are also different.)

    Ideas for a work around?

    Sorry for the spelling mistakes - my original message would not be accepted "your message contains profanity or inappropriate language.
    In the interest of your fellow forum users, we ask you to change your message.
    "but no indication as to where." Maybe it's that the things happening in the threaded inserts are not allowed

    Peter K

    > The reason seems to be that the "bowl" for the second disk drive carrier is not sold.
    The reason is that there are different configurations of P500
    The P500 and other series of Toshiba laptops are equipped with different motherboards.
    Not all motherboards support 2 HARD drive controllers.

    This can be a bit confusing for someone buying a laptop and see the second HARD drive Bay, but if you would remove the 2nd HARD drive Bay cover, then you will see that there is no HARD drive connector.
    This means that you will not be able to use the second HARD drive.

  • Pavilion Slimline d 235 400 has room for a 2nd hard drive?

    Hello

    Please check

    (1) if the Slimline 400 - 235 d has enough room in the tower to House a 2nd hard drive?

    I saw the video in this link, looks like it can only hard drive of House 1

    http://support.HP.com/us-en/document/c02915677

    (2) my HP warranty is cancelled if I buy my 2nd hard drive and install on my own?

    Thank you!

    BH

    BH098, welcome to the forum.

    I don't think you can install a second hard drive.  In the case, here are the bays of units:

    Size Bay bays Total

    13.33 cm (5.25 inches) ODD1
    8,89 cm (3.5 inch) HARD drive1
    * Berries can be occupied by existing material.

    One is occupied by the HARD drive and the other by the DVD recorder.  If you want to add a disk, I suggest buying a USB 3.0 external drive.

    If you have installed a second hard drive, he would not cancel your warranty.

    Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

Maybe you are looking for