Portege M780-106 - the mouse pointer position of the stylus trolling

Similar Questions

• Problem on not correct mouse pointer position

  My Client OS: Windows Vista Ultimate SP1 x 64

  I use Vmware Workstation 6.5.1 build-126130

  I invited two OS: Windows XP Professional 32-bit SP2, Windows Server 2003 Enterprise SP2 32-bit

  The problem I found is:

  When my client OS (vista x 64) have the default DPI setting (default scale: 96 DPI), and the display resolution is 1440 x 900.

  My two guest OS (Windows 32-bit XP and Win2003 32 bit) works well and no mouse found problem.

  But when I change the DPI setting as custom DPI 134 scale, and display resolution is always 1440 x 900:

  1. in guest OS Windows XP 32bits: mouse problem has occurred!  The mouse pointer is visible, but the position of the pointer is not TRUE!

  You can do like this to find this problem: right-click on the desktop (in the guest OS) to open the menu on the right, you will find the mouse pointer problem.

  2. in the 32-bit guest OS Win2003: mouse problem onlly when the mouse pointer from the guest operating system is close to Client operating system.

  How to solve this problem? I'm short-sighted that I can't put up with the default settings. (All things is too small, especially the font size)

  Hi, do you understand you this, I had the same problems, the pointer of the mouse poster, but poniter is not in the location that is clicked - the click action occurs approximately 2cm below and to the right... but your question about DPI made me relise its do with DPI settings...

  You have to click with the right button on the VM Workstation shortcut, select Properties, compatibility, and then select DISPABLE DISPLAY the SCALING ON HIGH DPI SETTINGS... It fixed the problem for me with vista x 64 as host and XP Pro / OpenSuse as guests.

  The thing I don't understand is when the host is vista 32 bit, it was not the problem...

• Portege M800-106 the system freezes when I connect a device via USB

  When I connect a device through a USB port, the system hangs. This happened with any device even something that has been used before. Example - if I turn on the printer /plug in my Blackberry to synchronize the .laptop just going so slow that I have to do a reboot with the devices still connected to get the system working again. Running Vista. Any help please?

  Hello

  You see yellow exclamation marks in Device Manager? Maybe a driver isn't installed properly in the system freezes.
  In addition, I would try to remove the USB ports in Device Manager. After this restart your laptop and USB ports will be recognized again.

  Have you tried a BIOS update? If this isn't the case, you should do it. Before you begin the update, close all running programs and make sure that you are logged on as administrator.

  Last but not least try to reinstall Windows using the Toshiba recovery disc. It only takes a few minutes and then you have settings to factory again! :)

• Tecra S1: Move the mouse pointer

  From time to time my mouse pointer moves slowly upward or sideways. This happens once anchored and when not docked. In the latter case, I have an external mouse not attached.

  This problem is really annoying, especially when you try to hit a box for example.

  Any ideas?

  See you soon

  seasack

  Hi seasack

  If you use the pointer internal (the stick between GH and B), it is very common that the ca of pointer starts to move.
  The reason is a bit technical but very understandable.
  The mouse pointer works like a small joystick. Means that it is that you push forward, down, sideways and so on. However, please check the HOUSE or 0-position from time to time. When you're not, this would be a normal position of the HOUSE for us but it doesn't.
  It is therefore possible that it may be wrong to believe that the position of the HOUSE is when you push forward.
  If you stand and do not change the position of the needle for (I think) 2 separate controls the position of the HOUSE, this position will then be the new post HOME until the next time he finds another.
  Actual cases is not that extreme, of course, but more normal cases are that you bend your finger on the pointer when for example reading something on the screen. The pointer can recognize as a small boost, and if you do go, then he could have a new position of the HOUSE and start to drift or it could be "heavy" feeling in a certain direction.
  The solution? Simple! Leave it on for about 5 seconds and it will go away.

  If you have this problem, even if your not even using the pointer, then I guess you have a hardware problem.
  Try disabling the internal mouse by pressing FN + F9.

  Good luck

  Tom

• Portege 3110 - need Accupoint driver mouse pointer for Win2K

  Hello.

  I've installed Windows 2000 on my old Portege 3110. Windows has installed a generic driver, which does not work with Accupoint integrated mouse pointer. I installed all the drivers for Toshiba laptop, in the order given, but it doesn't always work. Windows does not display an Accupoint driver.

  Where can I get the driver? The two buttons on the keyboard do not work.

  Thank you, Darren.

  Hello

  Hmm, the driver Toshiba Europe page provides no special touchpad to the W2k OS drivers.
  I checked the archive of the driver on the page and didn t find these drivers.

  Have you checked if you can configure this device Accupoint in mouse options?
  Do it!

  By the way; This unit Portégé is an oldie. It s about 8 years!
  And that's why I put t wonder you can't find not all compatible with this device drivers!

• Open submenus when I stop on them with the mouse pointer does not work

  I used to use Vista Upgrade of XP until it hit the big time. With this installation, the option 'Open submenus when I dwell on them with the mouse pointer' worked perfectly well.  Since I did a format and installed the full installation of Vista version, and now this feature does not work. I checked and re-checked the option in the customization of the menu star and nothing. Also unable to find what anyone at the mouse settings itself.

  Does anyone know how to get this feature to work again once it's something I use a lot.

  Concerning

  Owen

  Hello

  If none of these help or you find a solution please report.

  Does work here on Vista either, but I don't want it works even if it is checked.

  Try UnChecking the start - Customize - Menu tab apply / OK and then go back and save
  Apply / OK.

  If no joy this initiative will eventually.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------

  Maybe something here: [check Control Panel - mouse or TouchPad (as applicable)]

  If a mouse (or if you use a touch screen and a mouse)

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Single click to open an item - APPLY / OK

  Control Panel - mouse - look for hover or click Automatic similar settings according to your mouse.

  When a TouchPad

  Look in the Notification area next to the clock for all TouchPad control program.

  Control Panel - mouse - also look for it TouchPad (mine is on the device however settings tab
  other brands and maybe on the other tabs and more than one). There are usually the parameters that
  can determine if a click, double click, hover or can open or close a program.

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Single click to open an item - APPLY / OK

  If some people are well positioned can change to some other setting if you plan to leave
  them that way and then change again.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to change the settings of Vista mouse pointer

  Don't want the mouse pointer to can an action. You want to order by clicks.

  Have Vista.  When I use the mouse in Vista images or other areas, different things start happening simply by pointing the mouse on an object.  I want to be able to point at something and don't have anything happen unless I click on the mouse buttons.  How to replace the pointer (but still keep the visable pointer)?   I went in the mouse controls and couldn't find a substitution.  Thank you.

  Hello

  If a mouse (or if you use a touch screen and a mouse)

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Double-click to open an item - APPLY / OK (so well then set change as if you planned
  to leave it like that and then go back and change it back).

  Control Panel - mouse - look for the settings for hover or click Automatic or similar depending on your mouse.

  When a TouchPad

  Look in the Notification area next to the clock for all TouchPad control program.

  Control Panel - mouse - also look for it TouchPad (mine is on the device however settings tab
  other brands and maybe on the other tabs and more than one). There are usually the parameters that
  can determine if a click, double click, hover or can open or close a program.

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Double-click to open an item - APPLY / OK

  If some people are well positioned can change to some other setting if you plan to leave
  them that way and then change again.

  Hope this helps

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Get the coordinates of the mouse pointer?

  Hi all

  I'm Using 8120.My application running on it. I opened the browser application that has the mouse pointer

  in the screen. I want to get the x coordinate y of the mouse in my application.

  Is there an API?

  There is no API available that provides the position of the cursor in another application.

• Recent update win7 XP. could hover the mouse pointer over the button of brand-pages-bookmarks would be open.

  mouse pointer hover on brand-pages-bookmarks button would open - low-point drop in a folder in the list would be open for more bookmarks.
  How can I restore feature. It was very practice-not by clicking on

  Hi montee11,
  Maybe it's the menu of bookmarks? You can activate the menu bar in Firefox by:

  1. By clicking on '3' menu bar
  2. Click on + customize
  3. Show/hide toolbars and select Menu

  Placing the cursor on the Favorites button on the toolbar is more open automatically, but it opens when I click.

• The mouse pointer jump at the top of the screen when the dialog box opens

  In the last few weeks my mouse pointer jumps sometimes extreme high (left side) of the FF browser window. Only happens in FF, Chrome or IE or any other application from Ms. The mouse to update drivers fees Reloaded, switched mouses, USB switch, ports switched to a mouse not MS - all to nothing does.

  "It seems to happen most often when I mouse ' snap to" feature is turned on and that the pointer automatically moves to the default button in the dialog box.

  This unique disability FF to hide the pointer when you enter (when the value in the mouse properties box) have become very annoying.

  Please address and solve the two problems above. Thank you.

  Good news! Now come on. For the moment, you can disable
  KeyScrambler. You can always turn it on when you need it.

• How can I solve a problem witht my mouse pointer when it gets to the very big chance?

  When I use Firefox, at seemingly random times, my mouse pointer becomes suddenly extra-large. The only 'solution' that I found is to restart the computer.

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• The mouse pointer works not

  Hi all

  I'm running 10 FF and my mouse pointer does not work, when I hover over a link/image, the pop up box that normally comes with a description in it does not appear.

  It only works in safe mode. I tried to restart FF with all add-ons disabled but it did not work, I manually disabled all add-ons but it still does not work, it only works when I'm in safe mode.

  All Extensions and Plugins are currently disabled, but I still have this problem.

  No idea how I can solve this problem?

  Thank you.

  Thank you, it seems like a problem with the Intel HD 3000 graphics, I double graph on my laptop and changed to make FF use nvidia graphics in place and now the mouse works perfectly.

• Portege M780 - 10G: Toshiba Wireless Manager cannot initialize the 3G device

  Hello

  by mistake I deleted connections used by the 3G device to connect broadband.

  Now when I run Toshiba Wireless Manager it attempt to initialize the device of wide band 3G but nothing happens.
  The laptop is a Toshiba Portege M780 10 G, 3G is an Ericrsson F3607gw and the operating system is Windows 7 Professional 32 bit.

  I tried to reinstall Toshiba Wireless Manager and the device 3G driver.

  Please, can you tell how to solve my problem?

  Thank you

  To be honest I don t understand how you could remove connections to broadband?
  However, you should check first if the 3G device is recognized in Device Manager correctly.
  If it is not recognized, this would require a 3G driver installation.

  All parts of the software can be found here:
  http://APS.toshiba-tro.de/WLAN/?page=3gdownloads

  Here you will find the description step by step how to set up and establish a 3G connection via the preinstalled Toshiba Wireless Manager?
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

• The mouse pointer went crazy on NB100

  Started a download on the iTunes store, came back 30 minutes later to find my mouse pointer jump erratically in the vertical direction. Had to disable the synaptics pointing device driver and plug a USB mouse. After having rebooted and restart the mouse driver seems to work for most still until today where it does the same thing.

  If anyone else has experienced this? I came to the conclusion that the touchpad and keyboard on this device are just very poor indeed.

  Hello

  I never had a problem with my touchpad. I have to say that everything is working properly and also an external mouse/keyboard.

  Anyway, in your case, I would try reinstalling the driver for the touchpad, or have you tried it already? You can directly download the driver from Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Also, you should also try to reinstall iTunes. Maybe it s causing this problem

• Replacement of the HDD in Portege R400-106

  Hello
  I have a Portege R400-106, which no longer has a hard drive - so can not simply go down the number one :-(
  I'm working on which drive hard I can put in it,
  I see the hard drive in the laptop space has pins IDE. It is possible that it is type PATA, but my research so far suggests that when readers say they are IDE, I should be OK (please tell me if I have this wrong!)
  I think that it is a 2.5 drive "I'm looking for and the original drive would have been 80 GB, which is what I think I need.
  I think I blame a MK8025GAS?

  I found one at: http://www.memory4less.com/ConfItems.aspx?modelid=80028876
  but the cost is pretty prohibative as I live in the United Kingdom and the expedition of charges.

  I can't find anywhere who can tell me which drive is suitable
  Cheers in advance for any ideas :-)

  Hello

  I found information that original HDD is 1.8-inch PATA HDD with a capacity of 80 GB and you can use MK8007GAH from TOSHIBA.