Portege M780 - 10G: Toshiba Wireless Manager cannot initialize the 3G device
Hello
by mistake I deleted connections used by the 3G device to connect broadband.
Now when I run Toshiba Wireless Manager it attempt to initialize the device of wide band 3G but nothing happens.
The laptop is a Toshiba Portege M780 10 G, 3G is an Ericrsson F3607gw and the operating system is Windows 7 Professional 32 bit.
I tried to reinstall Toshiba Wireless Manager and the device 3G driver.
Please, can you tell how to solve my problem?
Thank you
To be honest I don t understand how you could remove connections to broadband?
However, you should check first if the 3G device is recognized in Device Manager correctly.
If it is not recognized, this would require a 3G driver installation.
All parts of the software can be found here:
http://APS.toshiba-tro.de/WLAN/?page=3gdownloads
Here you will find the description step by step how to set up and establish a 3G connection via the preinstalled Toshiba Wireless Manager?
http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm
Tags: Toshiba
Similar Questions
-
Wireless Manager cannot connect to 3G T-Mobile provider
Hi @ all,
I test the Toshiba Wireless Manager 5 (5.2.1047.66) on Windows 7 RC1 64 bit and I have the problem, that the Toshiba Wireless Manager cannot connect to T-Mobile. He always timedout while trying to connect.
I don't see why. If I use a numbering Windows connection then I'll connect to the ISP network.does anyone have an idea?
Kind regards
Alen Ahja
Hello
The profile used is taken from your provider's SIM card - do not try to create one yourself. He usually works with the settings.
Try this:
1. disable the 3 G module and exit the Wireless Manager.
2. wait 5-10 seconds.
3. turn on the 3 G module, and then open the Wireless Manager.Should work?
I have the problem that the module disconnects after a while. After it is not possible to reconnect because the Wireless Manager does not respond or I get a problem of downtime as yours.
See you soon
Kingkiwi -
Satellite Pro S300: modem 3G & Toshiba Wireless Manager Update
I received through Toshiba Tempro an update for my Toshiba Satellite Pro S300 (W7 32-bit) for a 3 G modem and Toshiba Wireless Manager.
After the State Manager is installed, there is not such a modem.This laptos has a build-in modem, where can I put a SIM card in?
Otherwise how to install a SIM card in this laptop to have internet access anywhere where I'm going?Hello
TEMPRO shows a downloaded driver information!
The point is that laptops are equipped with different hardware components and not all models support the same hardware specification.
Maybe your S300 has not been equipped with 3G modem but other S300 support 3G.However, you can check device manager if a 3G device is in the list
-
Portege R700 Toshiba Wireless Manager
Hi, I'm having a LOT of problems with my 3G connection via the Toshiba Wireless Manager. I have Windows 7 and version of the Wireless Manager program is CXP-901-4396/41 R3M03.
The main problems are:
-connection is failing all the time: it is connected, 5 minutes after it disconnects, and I have to log in again. Sometimes, I need to restart to be able to reconnect
-very often, when you are connected, the BLUE SCREEN appears. crash the computer!This only happens when the Wireless Manager is connected. Without it, the PC work 100%!
Help, please.
SPM
Hey,.
I Don t Portege R700 in front of me but it's perhaps useful to s when you reinstall the Wireless Manager driver and 3 G. Before doing this, check if the latest version is available on the Web from Toshiba site, otherwise try to reinstall the same drivers.
I hope it works :)
-
Toshiba Wireless Manager - not possible to choose the authentication protocol
Hello
I use for my Toshiba Wireless Manager mobile broadband connections. In a connection profile, it is not possible for me to choose what authentication protocol to use. In the Advanced Settings tab, the authentication section is grayed out. Using the program is mentioned that you can change the authentication settings.
Concerning
Post edited by: malo
Hello
As far as I know to create a new profile.
Then you could add the APN, user name, password and authentication protocol
But my knowledge in most of the cases, the SIM card is detected automatically and no manual work is required. If you do not need to choose the authentication protocolWelcome them
-
Windows cannot initialize the device of this hardware driver. (Code 37)
Windows cannot initialize the device of this hardware driver. (Code 37)
There is no upper or lower filters in reg.
external device does also not same massage (Windows cannot initialize the device of this hardware driver. (Code 37))
How do I solve this problemHello Rajendra Aagarwal,
Thank you to contact the community Microsoft and we will be happy to help you with your concern.
According to the description, it looks that you are having problems with the error message Windows cannot initialize the device of this hardware driver. (Code 37).
Method 1: Run the Fixit and check
Hardware devices do not work or are not detected in Windows (Fixit)
Method 2: Check the steps to get the 37 error code
Explanation of error codes generated by Device Manager in Windows XP Professional
Answer to us if you are having problems with the devcie or any other issue of Windows, and I'd be happy to help you.
Good day!
Hope this information helps.
-
During installation, download "error!" Cannot initialize the plug-ins directory.
Has started having problems when opening Firefox and trying to make Firefox the default browser. Windows 7 update and update AVG virus scan clean, updated MalwareBytes and scan clean. Troubleshooting finally brought me to uninstall and try for a clean install... normal Windows 7 uninstall process successful. Is that Firefox folder in "Program Files" has been deleted. Download "DownloadApp_1_7_5_198_Setup" (29 442 KB) of the Mozilla Web site and run... "error!" Cannot initialize the plug-ins directory. Please try again later. »
http://www.bleepingcomputer.com/forum.../error-cant-initialize-plug-ins-directory-please-try-again-later/
What are the permissions on your Temp folder?Look to see if there are a few cases on this point, brb.
-
This seems to have started with the last batch of updates of Windows 7 (including SP1).
I can't connect using dial-up. Get the message:
Cannot load the Remote Access Connection Manager service
Error 711: The operation could not complete because it could not start the remote access connection manager service
in time. Please try the operation again.When I try to start the Remote Access Connection Manager service manually, I get the message:
Windows could not start the service on Local computer remote access connection manager.
20 error: the system cannot find the specified device.My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.
I don't know what else might have changed.
Hello Vince_867,
Thanks for your post. Take a look at this thread for a possible solution to your problem.
See you soon
-
See statement above. connect iPhone via USB cable. Error Code 37 - cannot initialize the connection.
Ah, a famous Apple error. See: http://support.apple.com/kb/ts1275 and http://support.apple.com/kb/TS3125
-
Why Adobe cannot initialize the program?
Why Adobe cannot initialize the program?
Hello
Please see error: "Setup cannot initialize ' | Windows
Hope that helps!
Kind regards
Sheena
-
Hey guys,.
I am running Vista on my laptop Toshiba P200D. Recently I was making an error whenever I try to open the files that I downloaded from the internet. The message I get is "windows cannot access the specified device path or file. you don't have the appropriate permissions to access the item "."
I tried,
- Safe mode (not to fix)
- (No luck) system restore
- check security options - I have full access to the file.
I am running Vista 32 bit. I have avast antivirus running, but is not working and im unable to uninstall it.
Any help will be accepted with gratitude,
Thanks in advance,
Chris.
PS I'm the system administrator.
I do not fashion without failure, I advised a SafeMode with networking for network access using a wired connection to download and install Anti-Malware programs.
If this does not work:
Download/save the removal of Avast on a friend's computer tool > transfer it using a Flash Player > uninstall the corrupt Avast.
Which can be the source of the problem.
As you can not turn it off:
If under warranty, contact the manufacturer of your laptop.
If this is not the case, take it to a reputable repair shop, computer room.
Mick Murphy - Microsoft partner
-
Windows cannot load the required device drivers. It shows the details like Microsoft ISATAP adapter reports "tv_ConfigMgrErr31. This device won't be available until the problem is resolved. The Plug-and-Play ID is 17. What this mean and how can I make the correction of this error and operate?
Hello
Control Panel - devices - right click on - UNINSTALL - REBOOT Manager
Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
and on some computers, it will always be there but don't cause any trouble.On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
error message
http://support.Microsoft.com/kb/932520Y at - it no devices work not?
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Hi I encounter an error message "Windows cannot access the specified device, path or file. You don't have appropriate permissions to access. »
The error message every time I click on administrative tools of the window (including the Control Panel, windows update, the Windows Explorer, etc.) but without impact on other programs I have.
I rebooted in safe mode and discover that everything works fine (no error message will appear when you click on window management tools).
I proceed to do a clean boot-> first disable all services of third parties (message yet to come), and then clear the components of the service windows (message yet to come)
I tried to type "explorer.exe" in the start menu-> search field then click right highlight to run with administrative rights, then received another message of error "Server execution failed".
I am the administrator account on this PC - and have full access.
The error seems to have appeared on 11 August after Windows Update the following:
Update of security for Microsoft Windows (KB2536276, 2556532 2559049, 2560656, 2563894, 2567680), and
Update for Microsoft Windows KB2563227
A security update for the Microsoft.net framework 4 client profile (verson 1)
There is no installation of any software or updates outside the windows update.
I also tried to restore the windows before August 10, 2011, but that did nothing.
As the error prevents me to access any object Admin window - I'm unable to retrieve the product ID and write to Microsoft Tech and ask for help.
I hope some of you can offer the suggestion of possible solutions (I really want to re - install window 7 and other software, I'm sure).
Thank you.
My solution works in about 2 minutes, it's a very weird error and only happened to 3 jobs in the last 3 years, this solution does not need to create another account if local administrator is active and allows access to the corrupt user documents ect.
Log in as the local administrator or a domain administrator
If the local administrator is not activated refer to http://support.microsoft.com/kb/555910 and after completing these newspapers of steps on the local administrator account.
Locate the user for example files. C:\Users\[username]\
If you see no AppData press Alt to see the toolbar at the top of the window, select Tools > folder options, go to the view tab and select "Show hidden files, folders and drives" click OK.
Go to AppData\Local
Select all (Ctrl + a).
Delete
* Do not delete credentials (as it will remove their wallpaper) *.
This allows to release the error.
-
Hello
I have a Windows 2003 X 64 server and since a week ago everything works fine.For a week or two when I try to run an X 86 application, I always get this error:"Windows cannot access the specified device, path or file.If I run a x 64 apps everything works fine.What made a mistake?Thank youHello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please post your question in the TechNet forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
Original title: problems cannot do anything
Windows cannot access the specified device, path or file. You can't have__appropriate the permissions to access the item. I get it all the time can not download anything
Hi birdylod,
· What version of the operating system is installed on the computer?
· You did changes to the computer before the show?
· You use Internet Explorer? If so, what version are you using?
· What files you download?
Follow these methods.
Method 1: Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
Method 3: Scan the file system (CFS) auditor to repair corrupted files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
For reference:
What to know before applying permissions to a file or folder
Maybe you are looking for
-
No sound when using Firefox. ITunes and QuickTime work well
While surfing with Firefox, YouTube and other videos have no audio. ITunes and other audio programs work very well.
-
I started using firefox as my browser after a break of several months. This version is now old as it seems and I have been asked by Firefox update. However whenever I try it fails to register or it fails to be accepted by my computer, and Firefox tim
-
Output HDMI does not work on Satellite L775
Hello. I have a new Toshiba Satellite L775 with HDMI output. I wanted to connect the laptop to my TV to watch pictures via HDMI.But it did not work.I connected the laptop with HDMI cable for my Samsung - LCD - TV screen.Time, wireless and TV are alre
-
Lenovo IdeaPad Y560 does not load, battery and charger are OK
My 3 year old Lenovo Y560 laptop i5 does not load when I turn on with the battery in it everything works normally, but when I plug in charger nothing happens. I checked the charger and it works great, its output is stable 20V. When I remove the batte
-
UC browser supports adobe flash player?
Hello!!!I need your help guys I think, individually, I can; Please help play video on uc browser apk thank you so much display allow Dev help me please play video on browser.Thank you!!! Adobe! happy!