Portege M780 finger touch does not

Hello

I have a Portege M780 and Windows 7 x 64.

My laptop recognizes the pen and a point of contact devices.

Can I use the pen is fine, no problem with that. But finger touch screen doesn´t of work. I go to the control panel and finger touch is enabled.

I have download Wacom touch dual drivers for W7x64 web technical support Toshiba´s, but I can´t install it because when I try it says '' unsupported '' platform.

Could someone please help?

I have download Wacom touch dual drivers for W7x64 support Toshiba´s web

Where did you find this 64-bit driver?
The Toshiba European driver page does not touch Dual driver for Win 7 64 bit, but only for Win 7 32 bit

Tags: Toshiba

Similar Questions

  • Why the finger touches does not? "Cannot complete installation id touch."

    As such, there was no problem before. No crash that happened! No cold! not hot!

    Hello

    Follow the instructions here, including the title of "Get help":

    Use the ID Touch on iPhone and iPad - Apple Support

  • New Ipod Touch does not illuminate

    Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?

    Try the following steps:

    1. Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
    2. If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
    3. If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
    4. Be sure to contact the Apple support if you need more help.

    Good luck!

  • iPod touch does not present as associated device

    My iPod 5th generation touch does not appear on my list of device associated with my Apple account.  How I "associate"?

    Just where are you looking?

    You use the same ID and the device uses one of these characteristics?

    On the devices associated with

    When you use some features of the iTunes Store on your iPhone, iPad, iPod touch, or computer, your computer or iOS device is automatically associated to your Apple ID in iTunes account settings. These features include:

    View and delete devices in iTunes - Apple Support

  • After updating my iPhone to ios 9.3 iPhone touch does not

    HI guys! I'm too frustrated by the question. I'm updating my iOS to 9.3 (Build 13E233) on my 6-64 GB iPhone (model A-1586) and now I can't even use 10% of my phone. My touch screen works not even taping 100 times but if I press the lock and unlock my phone, my touch screen works very well for a few seconds then freezes while on the other hand all other keys work well while the touch is blocked (for example, Home, Power, Volume buttons) and I know my phone is not stuck but only touch does not. I'm too worried because I can't use my phone even for one moment what to do any help? Any help will be appreciated sorry for my bad English. Following that I

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

    More info here:

    https://support.Apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • iPod touch does not recognize my password 9.2.1 apple ios

    My Ipod Touch does not recognize my password for Apple.  IOS 9.2.1

    Password for what?

    What is the exact wording of any messages?

  • iPod Touch does not have 6th gen.

    So my 6th generation iPod Touch decided to completely brick itself. It is quite insensitive, appearing by all measures to be extinct. It does not have to be plugged into a charger or computer. I tested with several threads to make sure that's not the problem. All the buttons do nothing, no matter how long they are kept pressed. I seem unable to force it to turn it on (or stop, if it's just particularly good at playing dead) and can't seem to do anything but keep papers.

    I did not anything out of the ordinary to cause damage, so I don't see why it would be brick suddenly like that. I am running the latest iOS with the updates so far. As far as I can tell, it's just death. Everyone knows a similar problem or have any ideas on how to fix it?

    I'll try to get to an Apple store this week, but I guess they'll just replace. This isn't really a solution to the problem here. The problem is... it's the second time that this happens. When I bought my 6th Gen, he bricked within 72 hours. It is a common thing with the Gen 6 iPods or am I cursed? I really do not have to replace my iPod every 3 months.

    Helio83 wrote:

    I'll try to get to an Apple store this week, but I guess they'll just replace. This isn't really a solution to the problem here. The problem is... it's the second time that this happens. When I bought my 6th Gen, he bricked within 72 hours. It is a common thing with the Gen 6 iPods or am I cursed? I really do not have to replace my iPod every 3 months.

    The Apple Store is a good idea. You have restored iPod from a backup of the previous iPod? See if any of these articles get the operation of the iPod. If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Supportand If your iPad, iPhone or iPod touch does not respond or won't turn on - Apple Support

    -AJ

  • iPod touch does not work.

    I have an iPod touch that I got from a friend X years. So I don't know who it is. From last night, it will not work in my car. I can't turn it on, and my Mac isn't even recognize it either.
    My most recent iPod touch does not right in my car. So I gave to my current girlfriend. How can I fix these problems?

    - iOS: do not respond or does not light

    -Also try DFU mode recovery mode post-test

    How to put iPod touch / iPhone in DFU "Karthik doodles."

    -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

    -Try a different cable

    -Try on another computer

    S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

    Shop Apple Store - Genius Bar

    What to do when not working do not directly in the car?

    Have you contacted the manufacturer of car system? Sometimes they are not compatible with the new version of the iOS.

  • Gesture with one finger touchmouse does not respond correctly

    My fingers touchmouse gestures work ok, except for the gesture with one finger :( It does not at all on the desktop. It scrolls only of up and down a Web page, or when I'm in a window. It does not navigate to other directions with one finger.
    A quick response would be appreciated.

    Hi Teri,

    What operating system is installed on the computer?

    I suggest you try the steps from the following link:

    Mouse, touchpad and keyboard with Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

    Keep us updated with the results once you try the steps above.

  • Finger scanner does not work

    Hello.

    My scanner on my HP Envy 17 finger - laptop Whatever has worked since I got it, but this morning, something went wrong. Any finger I scan, he always tells me that the fingerprint was not found in the database. I tried to open the program that comes with the fingerscanner thing to reset the settings and try to put a finger in the database again, but it still does not work. It is said that my finger has been added correctly and that I can now use it to connect, but every time I try to connect it says always the same "the fingerprint is not found in the database" - something like that.

    What can I do?

    Kind regards

    Me

    Hi there @12344321broken.

    Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that the scanner on your laptop computer finger printing does not work correctly. You mentioned you tried to solve the problems already adding new fingerprints, but that they still do not work.

    Have you tried to update the driver in Device Manager? If this isn't the case, please follow these steps:

    • Open the Device Manager
    • Search for biometric devices
    • Under biometric devices, look for the device (called Validity Sensor sensor AuthenTec)
    • Right-click on the fingerprint sensor
    • Click on set to update driver
    • Restart your computer.

    If this does not work, make sure that you delete the old footprints in SimplePass and sign new. Please go to:

    • Control Panel
    • Programs
    • HP SimplePass
    • Scroll down to register fingerprints
    • Click and enter your fingerprints.

    If this does not help, I would say uninstall fingerprint driver and reinstall the updated release of the pilot.

    • Open the Device Manager
    • Search for biometric devices
    • Under biometric devices, look for the device (called Validity Sensor sensor AuthenTec)
    • Right-click on the fingerprint sensor
    • Click on uninstall
    • Restart your computer.

    Have you tried to upgrade HP SimplePass?

    Have you tried to do Windows updates?

    You tired to clean the fingerprint reader?

    Have you tried to use the reader of fingerprints in Mode safe?

    Have you done something new lately? Downloaded new software?

    There is a document called Troubleshooting a fingerprint reader. There are a few troubleshooting steps that may help you including those above. If the steps above has not fixed the problem you are having with your fingerprint reader, please try to follow the steps outlined in the document in the order.

    Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution". This will allow to the others is that present the same problem a solution also.

    If you need assistance, I would be more than happy to continue to help you. If please re-post with the troubleshooting results and could you please include your model number (How can I find my model number or product number?).

    Have a great day!

  • Software Bloggie Touch does not work because of the DEP - I can't turn off DEP for this program

    Original title: software Bloggie Touch does not work because of the DEP

    I downloaded the Bloggie Touch (Sony) software, but the function of prevention of execution of data in Windows Vista prevents me from using it. Any suggestions? I contacted Sony and they had me re-download the software on their site, but it did nothing. I tried to reset the DEP to allow the Bloggie software, but he says that the processer wouldn't let me do that. Message: I can not turn off DEP for this program.

    Any help would be appreciated.

    Hello
    the only other thing you can do is to do a Bing search for how to turn off dep.
    There are several options (not recommended by the way)
    b Eddie

  • print DigitalPersona finger scanning does not work after you install the recommended updates

    My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

    Hello

    1. do you have an error message?
    2. are you referring to the print scan hardware or software scan print that was supplied with the device?

    Method 1:
    I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

  • Three history of finger cursor does not work

    I use an Air of IPad.  The history of 3-finger gesture does not work.  Someone at - it solution.  Gestures of multitasking is disabled.  I've tried everything.

    Understand how to operate, do not keep the fingers closed together but apart.  Works now.  Thank you, Steve

    Sent from my iPad

  • Portege R500 - DVD player does not work

    Hello
    I love my laptop Portege I bought this month of September. The only thing is that the DVD player is not working for some time.
    -When I put a DVD or CD, I realize I can't freely turn the disc in the drive while it is still open. Strange, but I don't see anything blocking the rotation of the disk.
    -The system does not recognize at all have a DVD player. Initially, it worked, I can't say exactly when it went wrong. I checked with Toshiba Assist: in the information panel, it shows no info on the DVD player, in diagnostic Panel, I have the opportunity to check the DVD but when the test system is just jump the operation all the time, indicating that the Player cannot be found.
    -In the control panel I don't see no more among the hardvers
    -For starting, the DVD is one last thing to check in my BIOS settings. But in fact when the start-up the laptop I can hear the sound of the reader looking for something inside, turning or trying to rotate the disc, but it seems always becomes stuck and starting takes like 5-7 minutes due to lengthy trials, get the DVD player work in vain.
    -Now even when I put the energy setting to oriented perf, I no longer hear the system would look for DVD (setting the player gets off everything when using not saving)

    Someone from Toshiba support could help me? Is it possible to check this problem with the remote connection to my laptop, or something? Or should I take it to the service? With this, I also have a little challenge: I bought my laptop in Hungary, but now I stay in Japan throughout the year. So I would need a station in Tokyo where they accept my European warranty. Could you please provide me with any help or ideas? If possible, direct mail also. Thanks in advance!

    > Could someone support for Toshiba to help me?
    To do this, you will need to get in touch with the Toshiba ASP in your country.
    Here in the forum you can get suggestions form common users because it s a user forum to ;)

    > Is it possible to check this problem with the remote connection to my laptop, or something?
    I doubt that this is possible since this could be a hardware problem

    > Or should I take it to the service?
    Maybe this would be the best

    > I need a station in Tokyo where they accept my European warranty. Could you please provide me with any help or ideas? If possible by direct mail also
    On the page of Toshiba Europe, I was able to find an info on TOSHIBA EMEA LIMITED WARRANTY for NOTEBOOKS.
    This warranty is applicable only in the EMEA region (Europe, Middle East and Africa) and can be executed in any
    Countries the EMEA where Toshiba or its Service providers allowed offers warranty service terms and conditions provided for in the present
    warranty. This warranty covers the costs of service parts and labor needed to restore your system to full operational status.

    As you can see in the Japan is not covered by the EMEA region :( So I doubt that the warranty will cover the costs to the Japan.

  • My Explorer Microsoft touch does not connect to the computer (Win 8 and 7 or iMac)

    I bought a touch of Explorer Microsoft wireless mouse and cannot understand why the mouse does not connect. The small usb dongle is recognized and the mouse turns works. The optical light is blue and the touch sensor clicks when I run my finger on it. Nothing happens when I press any button of the mouse (without interaction with the computer). It almost seems like its not even connected to the usb dongle. I tried to find out what's wrong with it or with Windows. The mouse itself doesn't simply plug the usb dongle or on the computer at all. It is not a Bluetooth mouse, so there is no button to connect or sync.

    Hello

    As it seems to be a hardware problem, you can check the link for the Microsoft Hardware supported:

    http://www.Microsoft.com/hardware/en-in/support

Maybe you are looking for

  • ButtonBack drop

    I'm back again with a recurring problem. When I click on the back button, a drop down menu appears where I was before. It's annoying - how it stop popping up?

  • Grave FN key down on the Satellite A200-28i

    Hello. I bought a Satellite A200-28i.I don't know what happened, but now when I press the fn key blocks\crash of the computer and power the computer turned off. How can I access the fn again? Thanks for the rebind

  • What is Python22

    I can remove it without my OS

  • Range Extenders duplicates

    No idea why my Extender would create several MAC addresses on my device list?  I took offline and erased (all appointed Network Device), but they reappear.  Currently, there are about 12 of them, all with the same IP address.  Are they all identified

  • My laptop does not turn on and does not go to the Welcome screen.

    My computer says its update and there's just the TI shuts off and it resets again.