Portege M780 + Win10 - is it possible?

Similar Questions

• Portege M780-10V upgrade questions

  I'm glad my M780-10V and don't plan to change it too early, but I'd like to improve it.

  I upgraded RAM 8 GB, although windows 7 32-bit recognizes only 2,9 GB - ideas?

  Someone tried to move to Windows 7 64 bit, which should make more RAM available.

  Has anyone swapped the drive and installed an SSD, I think also 250GB, I guess that it should be a real boost.

  As for exchanging the i5 to an i7, I don't know who would be worthwhile - seems a costly change - as the i7 does not seem to add a lot by looking at different comparison sites.

  Thanks in advance.

  Simon

  I upgraded RAM 8 GB, although windows 7 32-bit recognizes only 2,9 GB - ideas?

  Win 7 32-bit as well as 32-bit systems recognize only 3.2 GB of RAM. This is the limit of 32-bit
  Recommended to use the 64-bit system in case you have more than 3 GB of RAM
  Portege M780-10V supports up to 8 GB of RAM so memory upgrade is possible.

  Has anyone swapped the drive and installed an SSD, I think also 250GB, I guess that it should be a real boost.

  The upgrade of the SSD HARD drive is the best move you could make... the performance gain will be noticeable. I made these updates on my Tecra laptop and am very happy with this...

  As for exchanging the i5 to an i7, I don't know who would be worthwhile - seems a costly change - as the i7 does not seem to add a lot by looking at different comparison sites.

  In my opinion, this is not necessary and I wouldn't recommend upgrade you the processor. First of all Toshiba and other laptop manufacturers do not support these updates. No one knows if these updates would not affect the functionality of the laptop, and in the worst cases, the BIOS would not support a new processor.
  At the other hand, you won't see the performance boost using new CPU... in my eyes these updates would be very useful.

• Portege M780 - upgrade Windows 10

  Hello
  I saw the following link http://www.toshiba.eu/innovation/generic/windows10/ that give dates for the release of a "set of software components WIndows 10" for some models - probably recent. It does not cover the Portege M780 I or elsewhere any Portege models as far as I can see.

  Windows 10 update would be available from microsoft in any case but y at - it advice re do this update from Toshiba or someone ese makes this or something similar. I am especialy curious to know if the fingerprint reader is supported.

  Thank you

  Clem

  Support of latest Portege Win10, Z930, R30 - a.
  The M780 maybe simply too old for the good conduct of the Win10.

• Portege M780 finger touch does not

  Hello

  I have a Portege M780 and Windows 7 x 64.

  My laptop recognizes the pen and a point of contact devices.

  Can I use the pen is fine, no problem with that. But finger touch screen doesn´t of work. I go to the control panel and finger touch is enabled.

  I have download Wacom touch dual drivers for W7x64 web technical support Toshiba´s, but I can´t install it because when I try it says '' unsupported '' platform.

  Could someone please help?

  I have download Wacom touch dual drivers for W7x64 support Toshiba´s web

  Where did you find this 64-bit driver?
  The Toshiba European driver page does not touch Dual driver for Win 7 64 bit, but only for Win 7 32 bit

  

• Need software preinstalled for Portege M780

  Hello

  I have reinstalled windows 7 pro on my Portege M780 and I need Toshiba pre installed Apps
  It was 7 Pro 32 bit and clean, I installed 7 Pro 64-bit Iv caught everything that is available in the download section for 7 64-bit, but not all is here.

  I used to have the cam, control rotation of the screen, DVD app and more I'm not even sure what to do as I have only had the day before installing windows :(
  If someone could help that would be great thank you

  PS I can't scanner finger to work anyway, once I installed it and set up com would not start after the login screen but did in safe mode then I disabled in Device Manager. Ideas Anyony Cheers

  I tried the pre installed applications recovery unsuccessfully :(

  Original recovery image that you got with your laptop contains the operating system, all necessary drivers, tools specific to Toshiba and utility and sure some additional software such as a DVD player, an antivirus, Office of test application.

  When you have installed OS on Toshiba download page you will find drivers, tools and utilities only. These additional requests will not be available. That you can have if you install original recovery image.

  Very important information of the end: Toshiba offer all that for operating systems supported only so if you can't find it on the download page, I can just say unlucky.
  In this case, you should try to find the right proposed drivers for other models, but with the same hardware components and it is quite complicated.

• Portege M780-10U frezees when using external LCD

  Hello

  I have a Toshiba Portege M780-10U running Windows 7 (x 32) SP1.
  I've updated all the drivers for the display, BIOS, etc.

  When I connect my Acer G235H laptop screen freezes after about 3 hours of operation.
  Nothing is recorded anywhere, just a complete freeze that requires a hard reset. The fan for the CPU to full power, and then runs once the freeze occurs.

  I'm not under any special graphics applications when it blocks just standard Office 2007 and IE8.
  I've isolated the gel down for display using a HP L1906 monitor and had no gel for 2 days.

  I tried the screen ACER G235H using VGA and HDMI, and I always get some freezes.

  Does anyone have ideas how I can fix this problem?

  Thank you

  > I've isolated the gel down for display using a HP L1906 monitor and had no gel for 2 days.
  For me it's really hard to believe that an external monitor may affect the functionality of the laptop, but it seems that your laptop freezes using only this special monitor (G235H).
  Use of the HP L1906 monitor everything is ok. Is this good?

  Hmm connect you the L1906 monitor to the same port as G235H?
  There may be differences between the external resolutions?

  Sorry mate, but it s really hard to tell what could bring it this maybe s a high temperature problem and perhaps its pure coincidence that freezes it cell phone using the external monitor.

• Portege M780 - names getting not transferred

  Hi guys,.

  Do you have a similar problem on Portege M780, I try to send SMS, I check the number for the name I send but the name not transferred and I had to type it manually myself... very frustrating.

  What SMS software do you use?

  If this is the Wireless Manager, try to update to the latest version on the site of support/drivers of Toshiba.

• Portege M780 - 10G: Toshiba Wireless Manager cannot initialize the 3G device

  Hello

  by mistake I deleted connections used by the 3G device to connect broadband.

  Now when I run Toshiba Wireless Manager it attempt to initialize the device of wide band 3G but nothing happens.
  The laptop is a Toshiba Portege M780 10 G, 3G is an Ericrsson F3607gw and the operating system is Windows 7 Professional 32 bit.

  I tried to reinstall Toshiba Wireless Manager and the device 3G driver.

  Please, can you tell how to solve my problem?

  Thank you

  To be honest I don t understand how you could remove connections to broadband?
  However, you should check first if the 3G device is recognized in Device Manager correctly.
  If it is not recognized, this would require a 3G driver installation.

  All parts of the software can be found here:
  http://APS.toshiba-tro.de/WLAN/?page=3gdownloads

  Here you will find the description step by step how to set up and establish a 3G connection via the preinstalled Toshiba Wireless Manager?
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

• Portege M780-106 - the mouse pointer position of the stylus trolling

  Question re Toshiba portege M780-106 touch screen laptop:
  We have a problem with the mouse, the position of the stylus trolling.

  This gap considerably increases the speed of the increase in movement of the stylus.
  As we had a task of monitoring with the stylus it is problematic.

  We run the task in Windows 7 using python 2.6 with mainly pygame library functions.
  Is there a way to disable the process that produces this discrepancy between stylus pointer and mouse?

  Any help much appreciated!

  Best
  Steve

  The CPU is running in performance mode? There may be a delay because the eco mode is activated, or the speed of the CPU has strangled at low speed.

• Availability of Portege M780 series

  Hello

  Anyone know about when the M780 will be available? I really want to buy one, but it is impossible to find the model and I looked! (Misco, Insight, Amazon, ebay and kelkoo)

  Thank you

  According to some online PC magazines, it should be on the market in the 1st quarter of 2010. It should be on the market soon. in these articles, I also found info having Portege M780 backlight Panel LED TruBright 12.1 inch 1200 x 800 with support multitouch for Windows 7 gestures.
  As you know probably computers notebooks are specific products of countries and in some countries they will be offered earlier and sometimes later.

• Portege M780 - supervisor password asked after sleep

  Hi all

  I think that hadou a bug in the BIOS M780. I put only a password the supervisor of all the 100 - odd machines we have. There are no other security settings enabled and when a computer falls into a deep sleep (ie. after a few hours) they get invited to enter the supervisor password when the awakening of the machine.

  All computers are running the latest version of the BIOS (2.10) and WIndows 7 64-bit. As we are a school we want to prevent children from starting from CD, etc..,.

  I have configured the Security section of the BIOS as follows;

  User password: not registered
  Supervisor password: saved
  HDD1/SSD1 Mode password: < user only >
  HDD user password: not registered
  TPM: disabled >

  Help or confirmation of the issue would be appreciated. See you soon!

  UPDATE: I have since discovered that the problem exists when waking up from hibernation, no sleep. I disbaled it via Group Policy for the management of the "Balanced" diet that has solved my problem now, although this behavior should not yet happen.

• Portege Z20t - Win10 version of the graphics card driver

  The current driver in my computer is: -.
  Device Manager > display graphics HD Adapters > Intel(r) 5300 > driver >
  Version = 20.19.15.4331 18/11/2015 Intel Corporation.

  On the Toshiba web site.
  http://www.MyToshiba.com.au/support/...download?OS=33
  Intel Driver driver 10.18.15.4256 windows 10 64 bits 179,7 MB

  And on the site Web of Intel, the driver is 15.40.10.4300 28 January 2016

  Now, how is the driver Intel version 28 January 2016 15 computer version 20 dated NOV-2015 and the toshiba web site but version 10 and it is still topical?

  And all this because Firefox does not restore correctly and also the computer does not wake up when I open the lid.

  I use z20t Portege with Dynadock 4 k and external monitor. The Intel 5300 driver cannot see the second screen and clearly does not work properly. Is this corrected? Can I update to the latest version of the Intel driver?

• Portege M780-102 cursor jumps erratically around while typing

  Just got my new Portege 780-102.
  But irregularly, the cursor jumps around when typing in any application.
  (.. .and no, this isn't my sleeve brushing the mouse pad)

  Search the Web...
  Seems that Toshiba portable computers have a bit of a history with this type of problem .

  There is a suggestion that I have to re - charge the pack of bluetooth applications.
  Try to talk to Toshiba tech.support in the United Kingdom, but they are on a holiday.

  Has anyone else had the same problem and have you known the problem solutions?

  Thanks a mill! Katie x

  Hi mate

  I read on this issue of cursor on the different laptop models (from different manufacturers).
  But in most cases, the users didn't note that the touchpad was accidentally while typing of touchpad.
  You said you checked this hmm but in any case, try to disable the touchpad while typing just for test purposes

  In addition, some have said that the BIOS update can also be useful
  So if the most recent BIOS is available, updated it!

• Portege M780 - how to upgrade the memory?

  I have a M780. I wanted to move to 8 GB. But if I open the memory module, I can find a slot for the memory. How can I access the other get 2 x 4 GB?

  As they seem to be similar to the M750, maybe it's the same thing with the M750 and someone can answer this question. Unable to find a service manual for the M750 / M780 either.

  THX

  Marcus

  Hi schuerstedt,

  Really, you ask where the other memory module location?
  The user manual is not interesting for you right?

  Well, if you check the user manual, you can find an exact description how replace the memory sticks with lots of photos.
  Check this box!

  BTW, the other location is placed under the keyboard.

• Portege M800-11R: Intel VT possible is virtualization?

  Hello

  Is it possible enable on this laptop hardware virtualization support?
  I have the latest version of the bios (v4.80) and win7 64 bit, but I want to use Windows XP virtual mode function (PC technology)

  Thanks in advance.

  Hello

  Depends on the CPU.
  If the processor supports VT and VT is enabled in the BIOS, then you can use.

  The M800-11R uses the Intel CORE2 DUO processor T6400 processor.
  http://Ark.Intel.com/product.aspx?ID=40479&processor=T6400&spec-codes=SLGJ4

  The Intel CORE2 DUO processor T6400 processor does not support the VT and therefore, you will not be able to use the VT,

  Good bye