Portege M800-103 - Bluetooth not working not not Linux

Similar Questions

• Re: Portege M800 - light does not

  I have a Portege M800 and the lights to the right of the power button won't turn off - even if the machine is completely turned off and unplugged from the power supply cable.

  I tried updated of the VAP and BIOS of downloads and have used the BIOS to turn off the power of LED lighting and tried to use Dimmer.EXe.

  They all turned off light Portege itself and the light above the touch pad, but not the 6 lights to the right of the power button.

  Can anyone help?

  Thank you.

  Hello

  Firstly, it must ensure that the latest version of the BIOS is installed.
  If you are using the latest version of the BIOS, then try this:

  Please, remove the battery and unplug the AC adapter.
  Then wait some time, two, three hours.
  Then reconnect battery and AC adapter.

  Check the BIOS settings (set by default)
  After this attempt to activate or disable the new lighting

• Portege M800 - Microphone does not work after upgrade to Windows 7

  Hello world

  I have a Portege PPM81E and am unable to get the microphone not working after having upgraded to Windows 7.

  I tried all the drivers I could find, but no luck.

  Is there anyone out there with the solution?

  Thanks in advance!

  Just a few questions:
  You have upgraded original Hat version of Vista you have with your laptop or you have installed the clean version of Win7?
  All hardware components are correctly installed and listed in Device Manager?
  How do you test feature mic?
  Microphone is in the sound properties > recording devices?
  MIC is set as default device?

• Portege M800: webcam does not work with Win 7 64 bit - webcam driver open failed

  Hey guys

  just got my companion to upgrade me for win 7 64 bit.
  Now, my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?

  "driver open webcam fail. Please restart camera or computer.

  See you soon

  Hello

  Seems that you used the wrong webcam software/driver or is not compatible
  You must use a webcam Chicony Win 7 64 bit software.

  > Now my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?
  The Portégé M800 Win 7 drivers are available on the European driver Toshiba page.
  You will also find the driver of Webcam Win 7 64 bit 1.7.260.0526

  Please remove first the old driver, and then restart the unit clean to the BONE using CCLeaner, reboot the device again and then install Chicony webcam software.

  Welcome them

• Portege M800 - Touchpad does not properly on Windows 7

  Hello

  In windows 7 the touchad does not work properly, which means I can't scroll pages by dragging my finger on the edges of the touchpad. It worked perfectly witn Vista and now it isn't. I have the 64 bit version.

  I tried new drivers, but there aren't any. How should I solve this?

  Thank you

  Hey Buddy,

  You have the most recent driver for the touchpad? Usually the Vista drivers also work on Windows 7.
  Check this box!

  In addition, the exact model number would be interesting.

• Portege M800 - point of exclamation mark on a PCI Device

  Hi all

  I had installed XP on my Portege M800. And it works properly.
  Two things that bother me are exclamation mark on a PCI Device in the Device Manager tab and I have just the sound system
  XP says that no drivers have been installed.
  I tried to install the success of whithout toshiba audio drivers.
  I think that the pci device is the modem but when I tried to install the drivers of toshiba modem, he says it's not good!

  Need help to sweep the Exclamation marks or what driver should I install?

  Thank you

  M800 is equipped with:

  -Realtek LAN card
  -WLan card from Intel
  -Conexant sound chip

  There are other sets of laptops that were equipped with the same features.
  So try to use the drivers in this series,

• Portege M800 - point of exclamation on SCSI RAID Controller driver

  I had installed XP on my Portege M800. And it works properly.
  One thing that bothers me is the exclamation point on the SCSI and RAID controller in the Device Manager tab.
  XP says that no drivers have been installed.

  Need help to sweep the Exclamation marks or what driver should I install?
  Thank you

  RAID SCSI on a laptop? : eek:

  Try the Intel Matrix Storage Manager for the Toshiba Site.

• Portege M800 - Exposed sensitive Touchkeys does not work

  I am owner of the Toshiba Portege M800-105. Everything done his work. After 2 months working on it, my sensitive touchkeys exposed next to the POWER button does not work. After that I uninstalled 'Vista-value-added-package' everything works correctly. Why? Now my FN keys do not work or are disabled. Why?
  Before uninstalling the package, the first button next to the power button had to function to turn off the backlight of the Logo, the touchkeys senitive one of my touchpad. NOW he cut the sound! Weired fairy if you aks me. How do I challenge my buttons up to factory settings and make function keys FN?

  I reinstalled the value added package again, and have the backup problem as before: the first two buttons next to the power button does not work!
  Unter the Application: Thoshiba Button supports, for the first two buttons there are no keys depositd/marked so that I can change the configuration here.
  FN keys work after installation of the package, but not the sensitive keys! Please who can help me?

  Value added package has small programs. One of them is the Toshiba button Support. Walker I have uninstall it everything works. When I install it, nothing works.

  Thank you for the help on [email protected]

  Post edited by: Togan_1

  Hello guys

  This is really strange. I put t really know what happen on your laptops. The fact is that these buttons are controlled by the software. If I remember well he called support Button or a button control and she is part of the package of added value.

  VAP contains several different tools and utilities. When you remove the VAP, it will be removed the responsible application of the functionality of FN (Flashcards), and this is the reason why the FN doesn't work anymore.

  So, theoretically everything should be OK when you install PPV again. Again theoretically. Why you still have this problem I put t know and I don t believe that no one can say for sure. Maybe some registry entries are corrupted now? Who knows?

  I presume that you don t want to use a more radical solution and do clean install of the new OS, but it can certainly help. With own OS pre-installed (factory settings) everything works well again.

  In the end, I must say that I use Satellite U400 (similar to your Portege) almost 6 months now and all the buttons work correctly. I always use the Vista version and I n t made no changes. It works well.

• Portege M800 - multimedia keys do not work

  A week ago, my laptop M800 multimedia keys stopped working. They does not light either. I tried the fix Package of added value and that doesn't seem to work for me. I downloaded TAVP but nothing happened.

  Anyone have any suggestions on how to make the buttons still works? Thank you. I run on a 32 bit OS (if you need to know).

  Hi l_vasic,

  Have you checked the BIOS? AFAIK you can also enable or disable these keys to enlightenment. It must be enabled

  Otherwise, it would be interesting to know what operating system you are using.
  Have you downloaded package of added value for Portege M800?

• Re: Portege M800-10Z - WiFi does not work

  Hello.
  I have a problem. I recently bought Toshiba Portege M800-10Z and downgraded Windovs Vista to XP service pack 3. All right, but the WiFi does not work.

  I tried to upgrade the wireless Lan driver, but it still does not work...
  I have Intel Wireles WiFi Link 5100 and system is Windovs XP service pack 3
  Is there someone who could help me with this issue?

  I would be very grateful for advice.

  Thank you very much

  Hello!

  That you say with the WiFi does not work?
  Can you connect to the router?
  The WLAN card is recognized in Device Manager?

  To solve this problem make sure that you have the latest version of the BIOS. Check on the Toshiba site.

  Also disable features of security as a hidden SSID, MAC address filtering and so far away.
  Check if an update of the firmware on your router available.

  Good bye

• Portege M800 - Chicony Webcam does not work

  I have a Portege M800 and the Camera Assistant Software simply does not work.

  I upgraded my Vista 64-bit Service Pack 2, I reinstalled the driver several times and I downloaded the latest version of the Camera Assistant Software from the Web from Toshiba site and nothing worked.

  I get a 'preview of no.' when I load first it and 'Graph making Fail' when I go to the video.
  However, the only thing is that I know that the camera itself is very well because very rarely it will work on MSN messenger, but he has not responded to other programs.

  Please help me!

  Hello

  > The only thing however is that I know that the camera itself is very well because very rarely it will work on MSN messenger, but he has not responded to other programs.

  This means that more different applications have access to this camera. Is this good?
  I think that is the question!

  In your case, I recommend you to disable the webcam software in msconfig-> Startup tab.
  In addition, you must disable the MSN also in msconfig. The point is that only an application that uses and sharing the webcam should run in the background of the OS.
  I think that this would avoid problems with other software

• Portege R400-103 - 3 G internal modem does not

  Hello

  I have several problems with my 3g modem. Even if everything looks well installed, the modem does not respond. In addition the hibernation, sleep and shutdown cause in an accident.

  Portege R400-103
  -Windows 7 Professional

  * About sleep/wake extended/dhutting down: *.
  When I disable devices that are bound to the modem 3g, this all works, so my conclusion is that this has something to do with the 3g device.

  On the modem does not: *.
  When I go to the properties of the modem, and I ask for a diagnosis (modem to send information on the State of request) a box arrives with a message that the modem has failed. The modem worked, and frankly I don't know what crazy it has stopped working.

  Maybe you guys need more specific information. Please let me know.

  Any help appreciated.

  Hello

  Just a question at the beginning: is your laptop preinstalled with original OS that you got with your laptop Portege?

• Portege M800 - noise and HWSetup does not start

  Hello

  I use a Portege M800-116 under XP - SP3.

  Problem 1:
  Connection Line-Out to a stereo system and play music with Winamp or WinMediaPlayer works fine on battery.
  As soon as I connect the power adapter, a whistle loud high frequency and UM static disrupts the experience.

  Problem 2:
  Files WAV or MP3 recording with internal or external microphone produce mediocre results.
  The resulting files include a high level of high frequency noise and hum static.
  Connect the power supply increases the problem.

  Comparing the quality of the recording and playback with my old confidence Portege M100:
  My M800 is one not only of poor quality - it's plain unusable.

  Problem 3:
  Toshiba HWSetup does not start from the control panel.
  Have you tried the ONU - and re - installing nothing helps.

  Thank you for guiding me towards a solution.

  Concerning
  T

  Hi, fly,

  I m not Portege M800 owner so I can t he test for you, but I think that if the problem occurs only when the AC adapter is connected, it s a grounding problem

  You have 3-pin or 2-pin AC/DC adapter?
  As far as I know in this case you need 3-pin AC/DC adapter and power cord.

  You should ask an ASP in your country. Guys can order a new AC/DC adapter and check your laptop to what the problem is exactly.

• Re: M800 made helmet protected works do not

  We have a PPM81A - 05W01J Toshiba Portege M800 running Windows 7

  The headphone jack of the computer seems to have stopped working. I checked in reading devices when the headphones (or speakers) are connected and are not up there. Curiously, when the computer is docked to the Dynadock and headphones are plugged into the socket the dynadock helmet then they appear in the dialog of reading devices.

  Someone give me advice on how to solve this problem, or troubleshoot it further.

  Thank you

  Hey,.

  If the headphone port replicator works, it could be a problem of the headphone jack of your laptop as Akuma wrote...

  But before sending it to an ASP, you should try the following steps:
  -Update the audio driver
  -Update the BIOS

  Everything you download from the Toshiba site I hope it helps! :)

• Portege M800-108 - LAN does not

  Hello all :)

  First of all, I'll post my information system
  Portege' M800-108 Windows Vista 32-bit Service Pack 1, with all the latest updates
  Router DLink DSL G624T no DHCP

  I got my laptop connected to my router this morning with LAN cable, and everything worked great. When I returned home, I connected the laptop to the router and the LAN was not working. The LED on the router would be clear ON and then turn off and then ON and OFF again, as if the PC is looking for a connection.
  I used all of the 4 ports on the router, I've used different cables and the problem is still there.
  The LAN driver is the most recent available.
  WLAN works very well on the contrary.

  Any suggestion? Is this a HW problem?

  TNX a lot.

  You said that the s light will light up and then move offshore, on and outside.
  This happens on all 4 ports?

  Normally, when this happens on a router or a switch which means that the router is defective.
  But you can try this:
  Unplug the router AC adapter. Wait at least 1-2 minutes and plug it back on again once.
  Maybe the router is working properly, and if not, you should change.