Portege M800-105 - output HDMI for XP driver?

Similar Questions

• Is possible to use the second HDD in PPM81E Portege M800-105

  Hello!

  Does anyone know, if it is possible to extend a Portege M800 - 105 model No. PPM81E with a second HDD?
  Is there a MediaBay for the DVD player to install a second hard drive?

  My goal is to use a Solid State Disk (64GByte) as the first disc (System only) and store all user data on the second drive.

  Best regards
  Sven

  Hello

  To my knowledge it is not possible to use a second HDD Portege M800.

  The laptop supports eSATA connection so you can connect an external HARD drive.

  Welcome them

• No driver Vista Portege M800-105 (PPM81E) available

  Hello world

  I bought an M800-105 and as with all laptops, I bought I did a clean reinstall of the operating system (in this case vista Home premium)... to my surprise there is only one driver listed when I search model fo PPM81E vista driver (the driver Bluetooth stack)

  I downloaded the necessary driver as displays and pilot Wi - Fi intel.com but all the features of Toshiba as keys FN, webcam, touchpad buttons next to the... power button not etc don t market.

  The driver for the device will be published, or is there a mirror/alternate for pilots bond?

  Thank you

  Hello

  Portege M800 is, in my opinion, the most recent model Portege and will certainly offer the drivers. I think it's just a matter of time. Vista drivers are available for all preinstalled Vista notebooks and will be the same with the Portege M800.

  But one thing confuses me: why you installed your version of Vista if Portege M800 is already available with Vista Home Premium? You created the recovery DVDs?

• Re: Difference between Portege M800-105 and 107-M800

  Hello

  Anyone know the difference between M800-105 and 107-M800?

  Hello

  I don t think there is a big difference between the two sets of laptops.
  The M800-105 was distributed in Germany and the M800-107 was delivered in other countries

  I think that's the main difference ;)

  Concerning

• No output hdmi for hpe 580t Windows 7 64 bit. Audio driver: Realtek 6.0.1.6196; Date: 9/7/2010

  Windows 7 64-bit. Audio driver: Realtek 6.0.1.6196; Date: 9/7/2010

  There is no realtek hdmi output in his choice.

  In its Panel:

  Speakers

  Headset

  Realtek Digital Output

  Pls help

  Hello detroithp, you could try going to this link and see if the information is what you need.

  This seems to be a common problem. The link shows the solution to this problem is for Vista,

  but it should be the same for Windows 7.

• Output HDMI on IDT driver version 6.10.6087.0 can only be used for audio?

  my audio receiver has an hdmi output. the driver idt can be used to control the output of the receiver?  I am currently connected to speakers & headset jack, and the only purpose that is to serve the receiver is to amplify the output of the laptop. is it possible to stream the audio output of the receiver through the audio driver of the laptop?

  original title: I am running vista with a driver for version 6.10.6087.0 idt. the hdmi output on this driver can only be used for audio?

  Hello

  ·         What is the brand and model of the laptop?

  ·         Your laptop supports HDMI components?

  I suggest you to contact the manufacturer of your laptop on HDMI audio settings for more information

• Playback devices does not recognize an output HDMI for sound!

  I have my HDMI connected with video but my output of sounds/audio/playbackdevices does not recognize that I have a connected TV, how do audio? theres no monitor to set as audio device by default!

  Normally, HDMI carries audio as well as video, so choose HDMI as the included default playback device work. If you don't see a HDMI, try:

  Click on:

  Start-> Control Panel-> Sound > tab reading .

  Now right click on an empty area and make sure that see the disabled devices and see the disconnected devices are enabled (checked). If your playback device (HDMI) appears, right-click on it and select enable. Now, right click on them again and select set as default device.

  If the above does not try to install the latest package of graphics driver that they usually contain the necessary audio drivers for output over HDMI.

  You can also check that your graphics card is capable of audio over HDMI output as some may not.

• Satellite L500-1kk and output HDMI for FULL HD LCD TV

  Hi all!

  I want to connect to my laptop L500-1kk to the TV LCD Full HD Sharp Aquos LC-42A77M via HDMI port, my question is that in the display properties that the maximum resolution is 1366 x 768, 1920 x 1080, so I'm afraid that if I buy a ([http://www.nu-global.com/product.aspx?cid=C_00000005&ccid=C_00000019&pid=P _ 00000026]) that I won't be able to read the Full HD content in the native resolution of the TV screen and be limited to 1366 x 768 and up-scaling of TV! so in summary

  1. the ability to have a FULL HD resolution after purchase and connection and a HDMI to my TV cable is not available or not? ?:|
  2. the integrated Intel graphics 4500MHD will perform well? or I'll experince problems?

  Thank you

  1.
  What you see now is the internal display resolution. When the TV is connected to the HDMI cable it will be recognized and the resolution will be higher, and you will be able to use 1080 p.

  2.
  Laptop is designed to be connected to the LCD TV and the HDMI port is available. Why Toshiba should offer this port if customers will have problems to use it?
  It is tested and you should have no problem.

  Cable HDMI to transfer audio signals and video so you will have the best image quality and sounf on your LCD TV.

  Good bye

• Output HDMI not working not not for Dell XPS L502X does not work after upgrade to Windows 10

  Hi all

  Good so I have this laptop Dell XPS L502X that I bought in 2012. The laptop provided with Microsoft Windows 7 Home Edition.

  His output HDMI for my Sony LED used previously to work properly.

  But there are a few months that those offered by Microsoft, I upgraded my OS from Windows 7 Home edition to Windows Home Edition 10 laptop.  Since the upgrade, everything worked fine except I don't get HDMI output to my TV.

  I tried to search for solutions online but do not know what could be the problem? Can someone guide me in the right direction please?

  Thank you.

  I am happy to update this thread, the problem of my laptop screen is displayed using HDMI on my Sony TV, solved on its own with the last update for Windows 10 which includes the OS 1607 version build: 14393.187

  To all of you who always fights for the configuration of HDMI output for their laptop to the television after upgrade to Windows 10, I'm sure that the last Windows Update will solve the problem.

• Portege M800 - Exposed sensitive Touchkeys does not work

  I am owner of the Toshiba Portege M800-105. Everything done his work. After 2 months working on it, my sensitive touchkeys exposed next to the POWER button does not work. After that I uninstalled 'Vista-value-added-package' everything works correctly. Why? Now my FN keys do not work or are disabled. Why?
  Before uninstalling the package, the first button next to the power button had to function to turn off the backlight of the Logo, the touchkeys senitive one of my touchpad. NOW he cut the sound! Weired fairy if you aks me. How do I challenge my buttons up to factory settings and make function keys FN?

  I reinstalled the value added package again, and have the backup problem as before: the first two buttons next to the power button does not work!
  Unter the Application: Thoshiba Button supports, for the first two buttons there are no keys depositd/marked so that I can change the configuration here.
  FN keys work after installation of the package, but not the sensitive keys! Please who can help me?

  Value added package has small programs. One of them is the Toshiba button Support. Walker I have uninstall it everything works. When I install it, nothing works.

  Thank you for the help on [email protected]

  Post edited by: Togan_1

  Hello guys

  This is really strange. I put t really know what happen on your laptops. The fact is that these buttons are controlled by the software. If I remember well he called support Button or a button control and she is part of the package of added value.

  VAP contains several different tools and utilities. When you remove the VAP, it will be removed the responsible application of the functionality of FN (Flashcards), and this is the reason why the FN doesn't work anymore.

  So, theoretically everything should be OK when you install PPV again. Again theoretically. Why you still have this problem I put t know and I don t believe that no one can say for sure. Maybe some registry entries are corrupted now? Who knows?

  I presume that you don t want to use a more radical solution and do clean install of the new OS, but it can certainly help. With own OS pre-installed (factory settings) everything works well again.

  In the end, I must say that I use Satellite U400 (similar to your Portege) almost 6 months now and all the buttons work correctly. I always use the Vista version and I n t made no changes. It works well.

• Portege M800 - point of exclamation on SCSI RAID Controller driver

  I had installed XP on my Portege M800. And it works properly.
  One thing that bothers me is the exclamation point on the SCSI and RAID controller in the Device Manager tab.
  XP says that no drivers have been installed.

  Need help to sweep the Exclamation marks or what driver should I install?
  Thank you

  RAID SCSI on a laptop? : eek:

  Try the Intel Matrix Storage Manager for the Toshiba Site.

• Portege M800 drive not found

  I have a Portege M800 which runs on Vista. I got it 6 months ago. Everything works well except now when I tried to play a DVD, he did not play. The pilot just informed and it sounded kind it was reading the disc, but there was no message or anything that prompted me to read the DVD or explore or other. I tried an audio disc, it's the same thing, which is nothing.

  Then I was surprised when I went to the computer, the DVD icon it was missing. Then I went to the Device Manager, there is no DVD icon. I checked the BIOS and there is nothing in the optical disc drive. I tried to open the DVD - RAM Utility from toshiba and an error box will appear that device not recognized.

  It seems to me that the DVD drive just disappeared. What is the problem?

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

• Portege M800 - Touchpad light extinguishes, and comp slows

  I have a Portege M800, model PPM81C-05C020.

  My problem is that the light above my touchpad dims and then gradually turns off completely. When this happens, I can't use the touchpad. Fortunately, I have an external mouse plugged in, but when the Synaptics mouse turns off, it also slows down my computer. I type this post very slowly and it still takes forever for words on the screen to catch up as I type. I thought that maybe the driver was somehow defective, so I went on the Toshiba site and tried to download the driver for this series of laptop and then restarted, but it did not help. I ran various programs to ensure there is no registry errors, but they all come back clean.

  I don't know what to do. I brought to a place of computer before and they managed to fix it, but 2 months later, the problem is recurring. Help! : S

  Hello

  This driver you downloaded from the official website of Toshiba?

  I would recommend a driver update from the official website of Toshiba touchpad:
  http://www.Toshiba.ca

  And interesting to know what OS you have.

• Portege M800-108 - LAN does not

  Hello all :)

  First of all, I'll post my information system
  Portege' M800-108 Windows Vista 32-bit Service Pack 1, with all the latest updates
  Router DLink DSL G624T no DHCP

  I got my laptop connected to my router this morning with LAN cable, and everything worked great. When I returned home, I connected the laptop to the router and the LAN was not working. The LED on the router would be clear ON and then turn off and then ON and OFF again, as if the PC is looking for a connection.
  I used all of the 4 ports on the router, I've used different cables and the problem is still there.
  The LAN driver is the most recent available.
  WLAN works very well on the contrary.

  Any suggestion? Is this a HW problem?

  TNX a lot.

  You said that the s light will light up and then move offshore, on and outside.
  This happens on all 4 ports?

  Normally, when this happens on a router or a switch which means that the router is defective.
  But you can try this:
  Unplug the router AC adapter. Wait at least 1-2 minutes and plug it back on again once.
  Maybe the router is working properly, and if not, you should change.

• Portege M800 - cannot recover Vista

  HY guys!

  Here's my problem, or even one of my friends...

  Today, my friend bought a Toshiba Portege M800-116 - model No.: PPM81E
  She turned on and I forgot to plug it in, so it closed during the installation of Vista and because she is a total noob on computer, she took her recovery disk and install XP. If the recovery image that should be put on the HARD drive disappeared...

  Now, I tried to install a Vista Ultimate x 64 but I had a lot of problems with the drivers and I could not slove it yet. For example, the display driver will not work and others too. But I don't want him to use XP because it can only use 3 GB of RAM and it has 4 GB...

  So maybe you guys can help me? I don't know what to do. I'm trying to find solutions for my driver problems, but a recovery for Vista file would also be nice... His great Vista, which should be installed. :)

  I'm of the Austria if it's important. ;)

  Hello and thanks for your help.

  Look at [www.isd.toshiba.com.au] and you will find 64-bit drivers.

  On the website, go to Support-Online Download Center, enter your model and you will find all the drivers for your laptop