Portege M800 - 11G: what is TRDCReminder & TRORDLauncher of Toshiba

Similar Questions

• Upgrade WINDOWS 10 on Toshiba Portege M800 - 11G

  Hello
  My question is very simple: can someone tell me if the upgrade to WINDOWS 10 is possible for my serial number - 11G, laptopnTOSHIBA M800 29037079W
  Best reahrds
  Andriusca

  Generally, the models with no UEFI Boot Mode will have problems to Win10.
  It is best to stay with the currently installed operating system.

• Portege M800 - Touchpad light extinguishes, and comp slows

  I have a Portege M800, model PPM81C-05C020.

  My problem is that the light above my touchpad dims and then gradually turns off completely. When this happens, I can't use the touchpad. Fortunately, I have an external mouse plugged in, but when the Synaptics mouse turns off, it also slows down my computer. I type this post very slowly and it still takes forever for words on the screen to catch up as I type. I thought that maybe the driver was somehow defective, so I went on the Toshiba site and tried to download the driver for this series of laptop and then restarted, but it did not help. I ran various programs to ensure there is no registry errors, but they all come back clean.

  I don't know what to do. I brought to a place of computer before and they managed to fix it, but 2 months later, the problem is recurring. Help! : S

  Hello

  This driver you downloaded from the official website of Toshiba?

  I would recommend a driver update from the official website of Toshiba touchpad:
  http://www.Toshiba.ca

  And interesting to know what OS you have.

• Portege R700 - 11G - high and annoying fan noise

  Dear friends:

  I have a Portege R700 - 11G, I bought only two weeks ago.

  The computer works fine, except for the high and annoying fan noise.

  Even do nothing, only to start and sometimes in the bios Setup, the fan is always turn with a temperature of 40 ° or 50.

  I've updated the BIOS and I don't know what to do.

  Can someone help me please?
  Thank you very much.

  Hi mate

  Please check the settings in the Windows 7 power management!

  There you can optimize the CPU and cooling performance module this should help reduce heat dissipation and fan speed.

  In addition I recommend upgrading the Toshiba Fingerprint Software immediately to the version V1.0.2.32 or higher. In addition, turn off the power save option of fingerprint device in Device Manager.

  Device Manager->-> authentic Tec Inc AES1610-> the power management of biometric devices

  Here, you will have to remove the mark next to the option called allow the computer to turn off this device to save power.
  Disable the power saving mode will reduce the life of the battery, so you can check whether or not it helps reduce noise.

• Portege M800 - noise and HWSetup does not start

  Hello

  I use a Portege M800-116 under XP - SP3.

  Problem 1:
  Connection Line-Out to a stereo system and play music with Winamp or WinMediaPlayer works fine on battery.
  As soon as I connect the power adapter, a whistle loud high frequency and UM static disrupts the experience.

  Problem 2:
  Files WAV or MP3 recording with internal or external microphone produce mediocre results.
  The resulting files include a high level of high frequency noise and hum static.
  Connect the power supply increases the problem.

  Comparing the quality of the recording and playback with my old confidence Portege M100:
  My M800 is one not only of poor quality - it's plain unusable.

  Problem 3:
  Toshiba HWSetup does not start from the control panel.
  Have you tried the ONU - and re - installing nothing helps.

  Thank you for guiding me towards a solution.

  Concerning
  T

  Hi, fly,

  I m not Portege M800 owner so I can t he test for you, but I think that if the problem occurs only when the AC adapter is connected, it s a grounding problem

  You have 3-pin or 2-pin AC/DC adapter?
  As far as I know in this case you need 3-pin AC/DC adapter and power cord.

  You should ask an ASP in your country. Guys can order a new AC/DC adapter and check your laptop to what the problem is exactly.

• Portege M800 - Exposed sensitive Touchkeys does not work

  I am owner of the Toshiba Portege M800-105. Everything done his work. After 2 months working on it, my sensitive touchkeys exposed next to the POWER button does not work. After that I uninstalled 'Vista-value-added-package' everything works correctly. Why? Now my FN keys do not work or are disabled. Why?
  Before uninstalling the package, the first button next to the power button had to function to turn off the backlight of the Logo, the touchkeys senitive one of my touchpad. NOW he cut the sound! Weired fairy if you aks me. How do I challenge my buttons up to factory settings and make function keys FN?

  I reinstalled the value added package again, and have the backup problem as before: the first two buttons next to the power button does not work!
  Unter the Application: Thoshiba Button supports, for the first two buttons there are no keys depositd/marked so that I can change the configuration here.
  FN keys work after installation of the package, but not the sensitive keys! Please who can help me?

  Value added package has small programs. One of them is the Toshiba button Support. Walker I have uninstall it everything works. When I install it, nothing works.

  Thank you for the help on [email protected]

  Post edited by: Togan_1

  Hello guys

  This is really strange. I put t really know what happen on your laptops. The fact is that these buttons are controlled by the software. If I remember well he called support Button or a button control and she is part of the package of added value.

  VAP contains several different tools and utilities. When you remove the VAP, it will be removed the responsible application of the functionality of FN (Flashcards), and this is the reason why the FN doesn't work anymore.

  So, theoretically everything should be OK when you install PPV again. Again theoretically. Why you still have this problem I put t know and I don t believe that no one can say for sure. Maybe some registry entries are corrupted now? Who knows?

  I presume that you don t want to use a more radical solution and do clean install of the new OS, but it can certainly help. With own OS pre-installed (factory settings) everything works well again.

  In the end, I must say that I use Satellite U400 (similar to your Portege) almost 6 months now and all the buttons work correctly. I always use the Vista version and I n t made no changes. It works well.

• Portege M800 - point of exclamation mark on a PCI Device

  Hi all

  I had installed XP on my Portege M800. And it works properly.
  Two things that bother me are exclamation mark on a PCI Device in the Device Manager tab and I have just the sound system
  XP says that no drivers have been installed.
  I tried to install the success of whithout toshiba audio drivers.
  I think that the pci device is the modem but when I tried to install the drivers of toshiba modem, he says it's not good!

  Need help to sweep the Exclamation marks or what driver should I install?

  Thank you

  M800 is equipped with:

  -Realtek LAN card
  -WLan card from Intel
  -Conexant sound chip

  There are other sets of laptops that were equipped with the same features.
  So try to use the drivers in this series,

• Portege M800 - multimedia keys do not work

  A week ago, my laptop M800 multimedia keys stopped working. They does not light either. I tried the fix Package of added value and that doesn't seem to work for me. I downloaded TAVP but nothing happened.

  Anyone have any suggestions on how to make the buttons still works? Thank you. I run on a 32 bit OS (if you need to know).

  Hi l_vasic,

  Have you checked the BIOS? AFAIK you can also enable or disable these keys to enlightenment. It must be enabled

  Otherwise, it would be interesting to know what operating system you are using.
  Have you downloaded package of added value for Portege M800?

• Portege M800 - the system hangs after connecting to fingerprint

  I just got my Portege M800 weeks ago and frankly speaking, this model has been giving me a lot of trouble. Earlier, it's heat problem in the palm rest and there is no solution for it.

  Now I am facing another problem with the connection of fingerprints. I'm running on Windows XP. I put the system must be locked after 5 minutes of inactivity. So normally after 5 minutes of inactivity, the system will have to be me to scan my fingerprint to open the windows. But there are moments which, after analysis of my fingerprints and put in correspondence with success, the screen will be just white (only show the desktop wallpaper). Not the desktop icons, no taskbar windows and nothing. Press Ctrl + Alt + Delete to bring up nothing and no answer even not a button. I tried to put the system to Hibernate by press the power button once as no response.

  So I have to finally press and hold the power button to reset the laptop.

  No matter which can help or give any idea of what was going on? Thank you!

  Hello

  I believe that these issues are in the past fixed with the new version of the fingerprint reader. Have you tried to install the latest version or you already have?

• Portege M800 - cannot recover Vista

  HY guys!

  Here's my problem, or even one of my friends...

  Today, my friend bought a Toshiba Portege M800-116 - model No.: PPM81E
  She turned on and I forgot to plug it in, so it closed during the installation of Vista and because she is a total noob on computer, she took her recovery disk and install XP. If the recovery image that should be put on the HARD drive disappeared...

  Now, I tried to install a Vista Ultimate x 64 but I had a lot of problems with the drivers and I could not slove it yet. For example, the display driver will not work and others too. But I don't want him to use XP because it can only use 3 GB of RAM and it has 4 GB...

  So maybe you guys can help me? I don't know what to do. I'm trying to find solutions for my driver problems, but a recovery for Vista file would also be nice... His great Vista, which should be installed. :)

  I'm of the Austria if it's important. ;)

  Hello and thanks for your help.

  Look at [www.isd.toshiba.com.au] and you will find 64-bit drivers.

  On the website, go to Support-Online Download Center, enter your model and you will find all the drivers for your laptop

• TouchPad overheating the Portege M800

  Hello

  We bought a * {color: #0000ff} Portege M800 (PPM80G-03F00M) {color} * recently.

  The touchpad and the sides of the touchpad are is heated during normal use. The heat is more than what is normal.

  All the solutions for this? Please, I beg you.

  Thanks and greetings
  Devanand

  Hello

  You know that the opinions are different and for me a question may be normal, but for you extreme negative or bad. Problem is that this little book has specific construction and I can imagine that the area around the touchpad is hot.

  You use your laptop with docking station?
  Do you use this laptop for each day's work like Internet, office or to run some complex graphic applications?

  In any case if you think that it is not normal that I recommend you contact Toshiba authorized service nearest. They can use the diagnostic programs and check if there is a serious problem or not.

• Portege M800 - horizontal lines on external monitor

  I just bought a number of new M800 (model number - PPM81A-06L01J) and all have second screens connected.

  On all secondary monitors, there are wavy horizontal lines. Secondary monitors are all of different sizes and different brand and model. They are all also on their native resolution and refresh rate. I also got the latest video drivers installed. Any body have an idea as to why this is and how to fix it?

  See you soon

  Brad

  Hello!

  I n t have a Portege M800, but on my Portege M700 I had some problems with the external monitor connected too.
  Here's the story about this:

  I connected the new external monitor for Portege M700 directly with an old VGA cable. Usually it t wasn't a problem for me but I was not satisfied with the quality of the image on the external monitor (a bit blurry) so I started to update the display driver and the BIOS of my Portege M700 but without success.
  Anyway, I tried a bit with Google and here in the forum and I decided to buy a new high-quality VGA cable. I exchanged the cable and what happens? Perfect image quality!

  As you can see, you should always use high quality new cables. Also, make sure that you use the highest screen resolution of the external display (native screen resolution) and set the refresh rate of the screen at 60 Hz.

  Good bye

• Portege M800 - mode 'sleep' and wake up fails

  Hi all

  you just bought a new Portege M800 running Vista.

  When the system goes into sleepmode or put into hibernation, there are not any what posisbility to wake up the system. I have to remove the battery is reactivated.

  Downloaded and installed the latest version of the BIOS, does all the Vista updates. Also checked the BIOS, the wake on LAN and the wake of keyboard are enabled
  Anyone else having this problem?

  Meanwhile, I've disabled hiernation and sleepmode in Vista, but this should not be the way to do it.

  Any advice much appreciated
  See you soon
  Dave

  Hello

  I m not a Portege M800 owner but normally I would say that you should try to update the BIOS and install all Windows updates, but you already have it not.

  What can you do now? If you have installed your own version Windows try again with the factory settings. Maybe it has something to do with software or then I don't know m.

  If it doesn t work I think you'll need professional help to an authorized service provider. Technicians can check your parts defective laptop hardware and trade if it of necessary.
  Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider
  Welcome them

• Portege M800 - after Windows 7 upgraded FN keys no longer works

  Hello
  I upgraded my * portege M800 * bought * Canada * for * 64-bit Windows 7 *.
  Everything is good except the keyboard. It's a Canadian bilingual keyboard with 86 keys with 13 function keys and a buttons on console with 6 keys (cut, cd/dvd, play, stop, previous, next).
  I don't update all the drivers because it works very well with Windows 7 drivers.

  The problem is:
  -function keys (Fn +..) no longer works
  -the buttons of the console with 6 keys (play, pause, etc.) no longer work

  What I did:
  -check the keyboard driver in Device Manager: it is a microsoft driver
  -a attempted to update a driver toshiba but * he didn't find in the list of drivers for windows 7 or vista on toshiba website *: [http://support.toshiba-tie.co.jp/windows7/download/PORTEGE_M800_64_cae.htm]

  So, I don't know if it's a driver problem or something else?

  Concerning

  Hey,.

  These special functions of the FN keys and multimedia keys have nothing to do with the keyboard driver. There is no update driver in addition to the keyboard. There is only the Windows standard driver that can be used.

  The point is that you have Toshiba Value added Package and Flash Cards Support utility. If you purchased the M800 in the Canada, I guess that it of a model Canadian and as a result, you can download all drivers here:
  http://www.Toshiba.ca

  Check it!

• Portege M800 - SSD, lag of 30 seconds before the start after POST

  I have recently upgraded to an Intel Postville's G2 X 25 - M 80 GB SSD and experience a second rule 30 between the BIOS POST (black screen) and actual boot from the disc. Support of the Intel says that it is probably a BIOS problem and that I should install the latest firmware, which I already did (4.80).

  System: Windows 7, 127-Portege M800-127 PPM81E M800.

  Hello

  I guess that this shift will be caused due to the BIOS test. After you turn on your laptop it checks internal devices like HDD/SSD, CD/DVD disk, CPU, RAM, etc. So some of the material was originally this delay, I think.

  If the latest BIOS can't solve your problem, it would be interesting to know what is happening with a SSD of replacement. Can you check that out, please?