Portege M800 - point of exclamation on SCSI RAID Controller driver

Similar Questions

• Portege M800 - point of exclamation mark on a PCI Device

  Hi all

  I had installed XP on my Portege M800. And it works properly.
  Two things that bother me are exclamation mark on a PCI Device in the Device Manager tab and I have just the sound system
  XP says that no drivers have been installed.
  I tried to install the success of whithout toshiba audio drivers.
  I think that the pci device is the modem but when I tried to install the drivers of toshiba modem, he says it's not good!

  Need help to sweep the Exclamation marks or what driver should I install?

  Thank you

  M800 is equipped with:

  -Realtek LAN card
  -WLan card from Intel
  -Conexant sound chip

  There are other sets of laptops that were equipped with the same features.
  So try to use the drivers in this series,

• RAID controller driver missing

  Hi, I got an error message that wanted me a pilot RAID, but when I tried to install it says that I did not meet the minimum requirements? But it does not list memory etc, how do I do lol?

  Any help would be greatly appreciated. Thank you

  Hello

  I suggest you do of course drivers have been downloaded and installed correctly.

  Go to the Intel website, select the good motherboard, select windows vista and drivers, then raid. Copy to usb and follow the directions on the page.

  Hope this information is useful.

• Disable the RAID controller driver

  Hello

  Please correct me the below script, I need to disable this driver "lsi_mr3" to solve the problem of OS freeze on cisco UCS M4 blades.

  https://Tools.Cisco.com/bugsearch/bug/CSCut37134

  a set of module system - active = false - module = lsi_mr3 esxcli

  $esx = Get-VMHost -Name 10.50.67.124
  $esxcli = Get-EsxCli -VMHost $esx
  #$esxcli.system.module.list() |where {$_.Name -eq "lsi_mr3"}
  #parameters.list("lsi_mr3")
  #$esxcli.system.module.get("lsi_mr3")
  $esxcli.system.module.parameters.set($false,$false,"lsi_mr3")
  $esxcli.system.module.list() |where {$_.Name -eq "lsi_mr3"}
  
  

  Try with this line

  $esxcli.system.module.set ($false, $false, "lsi_mr3")

• Qosmio F30: Need 64-bit driver for RAID controller

  Can someone help me?
  Please, I beg you!
  I have a Qosmio F-30.
  Where can I find 64-bit raid controller driver?

  Is there somewhere?
  Please, help me!

  Unfortunately, the 64-bit XP drivers are very rare and on the Toshiba driver page, you will find everything.
  Perhaps because Toshiba is not liberating all computers laptops equipped of XP 64-bit operating system.
  See only one way to find one; Google for 64 bit driver s David and maybe you succeed

  Good luck

• vSAN RAID controller compliance

  Hello

  I improved vSphere to 6U1/vSAN 6.1 last night and everything went very well - happy days. I noticed that the new plugin of the health has reported a compliance issue with my Raid Controller driver version. Either way, I'll have a latency intermittent host at this time and I think that this could be the culprit. I'm totally confused however as what needs to be installed. Before you deploy vSAN (about a month), I've updated through iDRAC all devices on my Dell R720xd 3 including RAID - H710Mini PERC controllers.

  vSAN THAT HCL needs:

  Firmware: 3.131.05 - 3415

  Pilot: megaraid_sas version 6.603.55.00.1vmw

  I need to reboot the servers to check the firmware version as iDRAC States 21.3.1 - 0004, which is apparently, according to this thread of dell, the version of the package, but assuming that the firmware version is correct, it leaves me with the driver update to version megaraid. I use a Dell ESXI ISO's so my question is, where can I get the megaraid driver and how do I install it in ESXI?

  Any help would be massively appreciated.

  That scrap. I've upated the "copy local HCL DB" and then ran a new test and everything is in line/green so everything seems fine!

• Install the raid controller during the installation of ESXi5

  Hello

  Today, we plan to install ESXi5 on our server.

  We had no problems during the installation of ESX4.1 as he ask custom drivers when it starts.

  But ESXi5.0.0 does not ask for the installation of the custom driver and we cannot install raid controller driver!

  I do not know how to resolve this so I wanted to know is possible to install the raid controller?

  Thanks in advance.

  I know I ask too many questions, but I know a little bit about it.

  No problem, that's what the forum is done

  Now should after you download the Image how I use it?

  Burn the image to a CD and run the installation from the bootable CD. Remember, though, that the image is usable only for new installations, not for upgrades (see release notes).

  André

• Portege M800 - after Windows 7 upgraded FN keys no longer works

  Hello
  I upgraded my * portege M800 * bought * Canada * for * 64-bit Windows 7 *.
  Everything is good except the keyboard. It's a Canadian bilingual keyboard with 86 keys with 13 function keys and a buttons on console with 6 keys (cut, cd/dvd, play, stop, previous, next).
  I don't update all the drivers because it works very well with Windows 7 drivers.

  The problem is:
  -function keys (Fn +..) no longer works
  -the buttons of the console with 6 keys (play, pause, etc.) no longer work

  What I did:
  -check the keyboard driver in Device Manager: it is a microsoft driver
  -a attempted to update a driver toshiba but * he didn't find in the list of drivers for windows 7 or vista on toshiba website *: [http://support.toshiba-tie.co.jp/windows7/download/PORTEGE_M800_64_cae.htm]

  So, I don't know if it's a driver problem or something else?

  Concerning

  Hey,.

  These special functions of the FN keys and multimedia keys have nothing to do with the keyboard driver. There is no update driver in addition to the keyboard. There is only the Windows standard driver that can be used.

  The point is that you have Toshiba Value added Package and Flash Cards Support utility. If you purchased the M800 in the Canada, I guess that it of a model Canadian and as a result, you can download all drivers here:
  http://www.Toshiba.ca

  Check it!

• Portege M800 - Chicony Webcam does not work

  I have a Portege M800 and the Camera Assistant Software simply does not work.

  I upgraded my Vista 64-bit Service Pack 2, I reinstalled the driver several times and I downloaded the latest version of the Camera Assistant Software from the Web from Toshiba site and nothing worked.

  I get a 'preview of no.' when I load first it and 'Graph making Fail' when I go to the video.
  However, the only thing is that I know that the camera itself is very well because very rarely it will work on MSN messenger, but he has not responded to other programs.

  Please help me!

  Hello

  > The only thing however is that I know that the camera itself is very well because very rarely it will work on MSN messenger, but he has not responded to other programs.

  This means that more different applications have access to this camera. Is this good?
  I think that is the question!

  In your case, I recommend you to disable the webcam software in msconfig-> Startup tab.
  In addition, you must disable the MSN also in msconfig. The point is that only an application that uses and sharing the webcam should run in the background of the OS.
  I think that this would avoid problems with other software

• Portege M800-107: Power Management & HDD Protection Utility questions!

  Hi all

  I own a Toshiba Portege M800-107, I recently installed windows 7 (ultimate edition), which has improved the capabilities of my laptop. The only problems I see are:

  (1) the utility power management, when I install the necessary drivers on the official page of Toshiba, the problem is that the package of added value is installed without the power management. For now I have more to come the problem using power options offered by Windows 7.

  (2) the biggest problem is the HDD Protection Utility, that whenever I try to install the driver from the official site, it stops the installation with the reason that "material is not supported by this computer.

  Out these problems the laptop works perfectly and quickly.

  If someone could help me with my problems, I would be very much appreciated.

  > 1) utility of the power management, where I install the necessary drivers on the official page of Toshiba, the problem is that the added value package is installed without the power management. For now I have more to come the problem using power options offered by Windows 7.

  There is no special tool of Power Saver for Win 7. Value added package provides a few additional options that you can find in Win 7/Vista power management.

  Check this HowTo:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

  (> 2) the biggest problem is the HDD Protection Utility, that whenever I try to install the driver from the official site, it stops the installation with the reason that "material is not supported by this computer.

  The HDD Protection Utility using the acceleration sensor built into the computer.
  The point is that there are different M800 market and possibly your M800 does not support acceleration sensor. This could be the reason why you can not install this tool.

• Defective screen on Portege M800

  I bought a PORTEGE (M800-107) in 2009 and before the expiration of the 3-year-old warranty (2012), the screen went black all the time.
  I sent it to the official service of TOSHIBA in Greece (called "IDEAL his '), who fixed it in about a month (and after two attempts).
  A year and a half later, the screen went black again. Now they ask me 500 euros for the replacement of the screen. Of course I won't give all these money.
  Portege was the 3rd Toshiba laptop, I used. I chose it because I wanted something powerful and professional. The irony is that the more expensive model has exploded sooner than the cheapest.
  However, it was the LAST ONE on your part.

  PS: in order to take my laptop (without attachment), I have to pay 30 euros for check technicians!
  Really, you know someone who goes to the service for fun? Or I am responsible for the failure of your model?

  Hello

  To be honest I m was really asking you this display problem. Portege and Tecra are the best notebooks of Toshiba business line and for years, they are known as products of high quality with the best material.

  Anyway, sometimes the best products have problems and be in trouble. Similar things happen with all technical products. I know that's enough damage and angry, especially in the time when you need your laptop.

  Maybe it sounds stupid now, but maybe you can buy view on your own and find someone who can exchange it for you. I did it for my friend a few years ago. We purchased watch on eBay and we exchanged it alone. Of course on our own risk.

  Bye and good luck

• Portege M800 - Touchpad light extinguishes, and comp slows

  I have a Portege M800, model PPM81C-05C020.

  My problem is that the light above my touchpad dims and then gradually turns off completely. When this happens, I can't use the touchpad. Fortunately, I have an external mouse plugged in, but when the Synaptics mouse turns off, it also slows down my computer. I type this post very slowly and it still takes forever for words on the screen to catch up as I type. I thought that maybe the driver was somehow defective, so I went on the Toshiba site and tried to download the driver for this series of laptop and then restarted, but it did not help. I ran various programs to ensure there is no registry errors, but they all come back clean.

  I don't know what to do. I brought to a place of computer before and they managed to fix it, but 2 months later, the problem is recurring. Help! : S

  Hello

  This driver you downloaded from the official website of Toshiba?

  I would recommend a driver update from the official website of Toshiba touchpad:
  http://www.Toshiba.ca

  And interesting to know what OS you have.

• Portege M800 no boot after BIOS update

  Hello

  I encountered some problems with my netbook (Portege M800-10W) after the BIOS update.
  The update of the BIOS program appears failed. Then my Netbook automatically rebooted and now I can't start my PC more.
  All the LEDs will light up but the screen remains black and after a few minutes, the beep 3 times (1 long, 2 cm) netbook.

  How do I restore the BIOS to the previous version (or plant)?

  Thank you.

  Adrien

  null

  Hi Adrien

  I think that Akuma is right. Your laptop must be verified by the service of Toshiba s. Let check your laptop and I hope they will help you with this.

• Is possible to use the second HDD in PPM81E Portege M800-105

  Hello!

  Does anyone know, if it is possible to extend a Portege M800 - 105 model No. PPM81E with a second HDD?
  Is there a MediaBay for the DVD player to install a second hard drive?

  My goal is to use a Solid State Disk (64GByte) as the first disc (System only) and store all user data on the second drive.

  Best regards
  Sven

  Hello

  To my knowledge it is not possible to use a second HDD Portege M800.

  The laptop supports eSATA connection so you can connect an external HARD drive.

  Welcome them

• XPmode on Portege M800

  Hi - I just bought a Toshiba Portege M800 but I don't know if this is Hardware Virtualization, I need to run under Windows 7 XP mode

  Is it possible to do this enable in the BIOS?

  Thank you

  > Is it possible to do this enable in the BIOS?
  Enter the BIOS settings and check if there is option of virtualization. If so allow it.