Portege M800 - Touchpad does not properly on Windows 7

Similar Questions

• Portege R500 - Touchpad does not scroll after Windows 7 upgrade

  Hello!! Happy new year!!

  I got a great Christmas present, an upgrade to windows 7, so I upgraded the operating system of my Portege R500 of Bussiness from Vista to Windows 7 Home Premium. Up here, the performance of the laptop has improved BUT the touchpad is not working properly and with correctly I mean that scrolling is not working more. I checked toshiba Web page downloads and there is no driver for the touchpad for windows 7. Is that what I can do to back the scroll function to work or is it just a matter of patience

  Thanks in advance for the help
  See you soon

  If you are certain that there is no driver Toshiba and is your Synaptics touchpad then try their drivers for Windows 7 [http://www.synaptics.com/support/drivers/]

• Portege R500 - Touchpad does not work on Windows 7

  I installed Windows 7 Ultimate, but cannot get the touchpad to work.

  Any suggestions for a fix?

  Post edited by: adeery

  Hello

  Have you tested an external mouse on the laptop? It work?
  The touchpad is listed in Device Manager?

  Normally, you can enable or disable the touchpad through FN + F9. Did you check that?
  You may need to install the package of value added for this.

• Tecra M3 - touchpad does not work with Windows 7

  I have a Tecra M3 I've updgraded to Windows 7. The touchpad does not work.
  The Web of Toshiba site has a Windows 7 drivers for this model. I tried install the driver of the touchpad and PVAT from the A11 model but still cannot make it work.

  Can anyone help? The audio is not working either.

  This old Tecra is not supported for Vista, so it can be difficult to find the correct drivers.
  I can see Tecra M4 is supported for 32-bit Vista, so use this with Win7 32-bit Vista driver in the hope that this will work.

  Audio driver? Let Win7 look good pilot. By the way: your Tecra has AnalogDevices AD1981B audio chip inside. Try to find the right driver Googling autour.

• Satellite C50D-A-12 x - touchpad does not work after Windows Update

  the touchpad does not work after the windows updare

  I always recommend you read other threads / messages and spikes before considering opening new thread in the forum
  https://Forum.Toshiba.EU/showthread.php?82878

• Portege R500 - Vista does not SP1 using windows update

  I just got a new Portege R500.

  Do not specify the information of Windows Vista Service Pack 1, so I guess that's not?
  But the automatic windows update does not offer to install SP1.

  What I have to do it manually? How?

  The other question is: is it OK to do, or are there many problems with drivers after that.

  Please help out me.

  Hello

  First update of Windows is always desirable and SP1 is really necessary, because it fixes many bugs in Vista.

  One of the reasons why Windows Vista doesn't automatically update the SP1 version, is that SP1 can be installed.
  Check if SP1 has been installed. To do this follow these steps:

  1. Click Start, right-click computer and then click Properties.
  2. Windows Vista SP1 is installed, you will see a reference to Windows Vista SP1 is displayed at the bottom of the Windows edition section

  However, I found a useful document of Microsoft Knowledge that could help you to update SP1
  [Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates | http://support.microsoft.com/kb/948343]

  See you soon

• Pavilion G6 2338sl: hardware button to turn off the touchpad does not work on Windows 10

  Hello

  I have a Pavilion G6 mobile 2338sl. When I was on Windows 8.1 the touchpad worked a lot, so I've updated for Windows 10. Windows updated my drivrs to last, provided also by Synaptics (19.0.19.1). HP says the moment is upgrade from Windows to provide the driver for this laptop, as you can see on the driver support page. The touchpad works, the parameters can be set (gestures etc.), the touchpad turns off when another mouse is connected (it's ok).

  The problem is that if I use the touchpad and I want to turn off the button, it does not work and the computer reacts like a click. So I returned to the old driver and button works. But Windows Update continusly updated the driver (I disabled the option in the advanced settings, but it still update) and I come to every time.

  So I tried to reinstall Wndows freshly (not update Windows 8.1) and with the old driver works, but when she updates to 19.0.19.1, the button to turn off the work stoppage.

  I looked on the interent and someone tips to set minimum detection of palm. I tried but it still not working.

  I hope someone can help me

  Concerning

  Hello

  If you find that the old Synaptics driver works Ok, install it and then use the utility on the following link to prevent Windows 10 to automatically update again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Acer aspire 7551g Touchpad does not work in Windows

  It does not work. Any help would be appreciated.

  Hello

  It would be better asked in the Forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ============================================================

  Hello

  Try the system restore before that happened:

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ---------------------------------------------------------------------------

  Check with the manufacturer support, documentation in line and/or forums (if any) in the system
  There are probably
  Shortcut keys that enable and disable the touchpad functions.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ------------------------

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

• Pavilion dv7-6b51ea graphics controller does not properly on Windows 8

  Hello

  Since I upgraded to Win7 for Win8 I all right, except that I can't play some games (for example Alan Wake). The graphics are ok on all the cutscenes, but in a kind of negative colors during the game.

  I already tried to uninstall and install the back card (not physically). Also, I tried to update the driver, that does not work either.

  Do you have someone had the same problem and was able to remedy?

  Thank you!

  Alan Wake was working properly in Windows 7?

  How the device has been upgraded to Windows 8?  Was it a new installation or an upgrade on the spot?

  It seems that the system can have switchable graphics with Intel and AMD.  Was this the driver you have installed?  You mentioned that it didn't work.  He did install the driver correctly and the problem persists or not installing driver fail?

• Satellite T110-107 - Touchpad does not properly

  I love my Satellite T110-107, but there are problems with the touchpad.

  (1) the mouse cursor does not move sometimes. With this one, I get to move taking both hands away from the laptop for a while.
  (2) the cursor of the mouse all of a sudden 'draws' of the right hand of the screen.

  I tried to change the sensitivity of the touchpad to the minimum and maximum levels, I adjusted the sensitivity 'Palm', but nothing seems to help other than by the low sensitivity that helps a little.

  I also noticed that when the laptop is on my lap, the problem is worse than if it's on a table.

  I think it's a problem with an accumulation of static electricity on the case.

  Other ideas?

  Hey Buddy,

  I use the Satellite T110 for months now and really and no problem. Everything is great and I don t have problems. It the laptop really great s!

  There must be something wrong with your installation.
  First of all, I would recommend updating the driver from the touchpad. You can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  After that you should test again. Also check the settings of the touchpad again. There are a large number of settings to improve the touchpad.

• Re: Portege M800 - light does not

  I have a Portege M800 and the lights to the right of the power button won't turn off - even if the machine is completely turned off and unplugged from the power supply cable.

  I tried updated of the VAP and BIOS of downloads and have used the BIOS to turn off the power of LED lighting and tried to use Dimmer.EXe.

  They all turned off light Portege itself and the light above the touch pad, but not the 6 lights to the right of the power button.

  Can anyone help?

  Thank you.

  Hello

  Firstly, it must ensure that the latest version of the BIOS is installed.
  If you are using the latest version of the BIOS, then try this:

  Please, remove the battery and unplug the AC adapter.
  Then wait some time, two, three hours.
  Then reconnect battery and AC adapter.

  Check the BIOS settings (set by default)
  After this attempt to activate or disable the new lighting

• Portege M800: webcam does not work with Win 7 64 bit - webcam driver open failed

  Hey guys

  just got my companion to upgrade me for win 7 64 bit.
  Now, my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?

  "driver open webcam fail. Please restart camera or computer.

  See you soon

  Hello

  Seems that you used the wrong webcam software/driver or is not compatible
  You must use a webcam Chicony Win 7 64 bit software.

  > Now my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?
  The Portégé M800 Win 7 drivers are available on the European driver Toshiba page.
  You will also find the driver of Webcam Win 7 64 bit 1.7.260.0526

  Please remove first the old driver, and then restart the unit clean to the BONE using CCLeaner, reboot the device again and then install Chicony webcam software.

  Welcome them

• HP Envy 360, model 15-U363CL: Synaptics Clickpad setttings works does not properly in Windows 10

  Synaptics Clickpad v. 19.0.12.95 settings are not saved after Windows 10.  Every time I have stop and restart Win 10, I have to disable "TAPPING" I hate go in the settings of the mouse/clickpad.  Settings have been saved on close and worked well in Win 8.1.  HP needs to come with a new driver.   In the meantime, I guess I might have to go back to 8.1 win?

  Anyone else having this problem?

  Software and driver results for:

  HP ENVY x 360-15-u363cl (ENERGY STAR)

  Synaptics TouchPad Driver 18.1.7.52 Rev.A 188,0 MB 17 July 2015

  You must use Win 8.1 driver as driver Win 10 is not available for the touchpad.

• Portege M800 - Microphone does not work after upgrade to Windows 7

  Hello world

  I have a Portege PPM81E and am unable to get the microphone not working after having upgraded to Windows 7.

  I tried all the drivers I could find, but no luck.

  Is there anyone out there with the solution?

  Thanks in advance!

  Just a few questions:
  You have upgraded original Hat version of Vista you have with your laptop or you have installed the clean version of Win7?
  All hardware components are correctly installed and listed in Device Manager?
  How do you test feature mic?
  Microphone is in the sound properties > recording devices?
  MIC is set as default device?

• Satellite L350D - touchpad does not properly?

  I have a Satellite L350D who bought new last month and the mouse pad has stopped working properly.
  Instead of 'double tapping' you must click on the left button of the mouse.

  This makes the button for macro on my excel sheet calculations are completely except.
  It seems to be intermittent did not work yesterday, worked this morning and stopped working this afternoon.
  I have windows Vista Home Basic installed as my OS.

  Any help would be appreciated.

  Hello

  Have you checked if the function of double cassette in no has not been disabled touchpad settings?

  I m using Win XP and I have disabled this dual function broadband because I recorded it always accidentally.
  Whatever the touchpad settings should be placed in the control panel-> mouse. Check here some available tabs

  In addition, its value to update the driver of the touchpad driver and software are released on the European driver Toshiba page.