Portege M800 - update BIOS stucks - Windows 7 32 bit

Similar Questions

• Dell Vostro 5470 not get Dell Logo after update bios in Windows 10

  Dell Vostro 5470 not get Dell Logo after update bios in Windows 10.

  Laptop computer has restarted:

  1 Fireed power led,

  2 Powered hard drive for 2 seconds to turn it off.

  3. stops...

  No Dell Logo, no beeps, can't go in the Bios.

  Test LCD works OK.

  Remove the module of Ram, power on and listen to beep

  Pressing the END key and power for laptop has no effect.

  Any idea?

  Yes. I did it.

  Laptop have bios Phoenix.

  Phoenix Bios have restored the USB Flash procedure.

  This procedure to restore the BIOS:

  1. download USB flash less than 4 GB.

  2 format in FAT.

  3. get your flash update of the Dell store - xxxx.exe

  4. run cmd.exe and in the command prompt, run /writehdrfile xxxx.exe

  5 extracted copy of Bios.cap for the flash player.

  6. turn off the power to the laptop.

  Next 7,8 step may not be necessary but I did it.

  7 disconnected all perihpericals with battery and charger.

  8 disconnect the HARD drive

  9. connect the USB on the laptop on the right side.

  10 press and hold the END

  11, Pluged the power cable and the relase the END key 1 second after the power cord is in.

  12 USB led on stick flashed quickly and we see the process of recovery of the Bios on the screen.

  13. After finishing laptop restarts and worked well.

• Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

  original title; Problem installation of update KB2556532 on Windows Vista 32 bit

  I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

  I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

  She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

  Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

  Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

  At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

• How can I install Windows Update error 80244019 Windows 7 32 bit?

  How can I install Windows Update error 80244019 Windows 7 32 bit?

  Try to use this to reset the update system is very good,.

  Use Option 2 on the list after right click and select run as administrator

  https://Gallery.technet.Microsoft.com/scriptcenter/reset-Windows-Update-Agent-d824badc

  Download in your downloads folder

  Right-click and select extract all in the downloads folder.

  Then right-click on ResetWUEng and select run as administrator

  Follow the rest of the guides messages

  Press any key to continue

  Type 2 for this Option on the list and the Enter key to reset the update services...

  Press y for Yes and then the Enter key I think twice

  After that that he completed

  Type 15 for this option and the Enter key to restart the machine.

  Must they will restart in 60 seconds will save your work... Press a key to continue.

  After reboot, go to windows updates and manually check the updates shouldn't take a few minutes.

  

  Subsequently

  The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.

  http://www.SevenForums.com/tutorials/2797-Windows-Update-settings-change.html

  Make sure that KB3020369 is installed, otherwise install it manually it is detailed with all versions, article page

  https://support.Microsoft.com/en-us/KB/3020369

  These links will prompt you to download as soon as you click on them just for you give a heads up :)

  Win - 7 32-bit

  https://download.Microsoft.com/download/C/0/8/C0823F43-BFE9-4147-9B0A-35769CBBE6B0/Windows6.1-KB3020369-x86.MSU

  Win - 7 64-bit

  https://download.Microsoft.com/download/5/D/0/5D0821EB-A92D-4CA2-9020-EC41D56B074F/Windows6.1-KB3020369-x64.MSU

  Then manually install page article detailed KB3172605 with all versions.

  https://support.Microsoft.com/en-us/KB/3172605

  KB3172605

  Win - 7 32-bit

  https://download.Microsoft.com/download/C/D/5/CD5DE7B2-E857-4BD4-AA9C-6B30C3E1735A/Windows6.1-KB3172605-x86.MSU

  Win - 7 64-bit

  https://download.Microsoft.com/download/5/6/0/560504D4-F91A-4DEB-867F-C713F7821374/Windows6.1-KB3172605-x64.MSU

  After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.

  If you need Visual AIDS to refer to this

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

• Portege R100: update BIOS - unauthorized user

  Hello.
  I am trying to update the BIOS of my newly purchased Portege R100, but flea market.
  I installed the driver of common Modules after it failed the first time, but now when the BIOS update starts I get an error window pop up saying "user is not authorized to update BIOS. Where do I change this?

  I only am not particularly computer savvy so please be gentle with me.

  Jim

  Hello Jim

  Is there a special reason for update you BIOS? Did you clean OS install?

• Portege Z830 - update BIOS

  Hello

  I want to update my BIOS from version 1.4 to 1.6 (latest)

  When I try to do it (directly with the updated BIOS or via the TOSHIBA Service Station) I got the following error message:
  Error: Preparation of updated failed
  You have not given permission to run the update.

  I am connected with an administrator account and I already try to run it with "run as Administrator"

  I'm not on the toshiba Windows installation because I have my own license of Windows 7 Professional (64 bit).

  Can you help me?

  Thank you very much

  PS: Sorry for my English, it is not my native language

  Question may be stupid, but why do you want to update the BIOS?
  Have you noticed a few problems with your machine?

• HP 250 G4: update Bios stuck (HP Support Assistant)

  Hello

  I was updating some drivers through HP Support Assistant, and BIOS update got stuck as shown on the picture below. I was hoping that someone will be able to direct me what to do next. I'm afraid the computer restart or stop the installation.

  If I stop and install an update of the Bios from another somewhre, that will maybe bad installation?

  Thanks in advance,

  Miloš

  

  Hello

  You are welcome

  The flash would have occurred at the start, so that this didn't happen, your existing bios revision will not have been affected.

  My personal opinion would be not updated the bios unless the update fixes a problem that you are experiencing or adds additional functionality you need - if the machine is running Ok, there really is no need to update.

  Note:  I see in your screenshot that your current bios revision is F.1A - there are 2 dream later listed for your laptop.  The HP Bios updates are cumulative, so if you don't want to update, the latest version will contain all the corrections/improvements offered by previous versions - the last enumerated revision is here.

  Kind regards

  DP - K

• Portege M800, Vista, BIOS 4.00, cannot turn off LED lighting

  After that update BIOS to illuminations V4.00 LED begins to turn over Vista start even if LED illumination is set to OFF.
  BIOS V1.40 worked as expected.

  How to disable LED on M800 lighting in Vista with BIOS V4.00?

  Lighting can be turned off in the BIOS and in HWSetup installed on your system.
  If you turn off the light in the BIOS, do not forget to save the changes you made before you let the BIOS settings.

• Update Bios of Windows 8 for m2n61-ar

  I need an update of the bios that works with windows 8 for m2n61-ar motherboard HP pavilion slimline gx615aa. All I can find is one that works with vista. I've updated this computer to windows 8, but it works always the 5.09 v of bios and I belive the most recent bios is v5.18. If someone can direct one that works with Windows 8 or a bootable update me please.

  Here are the specifications of your desktop HP Pavilion Slimline s3300f. According to the specification, this model was presented for sale on or around November 26, 2007 and comes with Windows Vista Home Premium 32 - bit. HP supports only this computer in its original configuration and only provides updates of BIOS for use on the computer that is running Windows Vista. HP does not provide a version of the update of the BIOS for this computer that is compatible with Windows 8 or bootable.

  You can update the BIOS installing Windows Vista on a disk replacement or using your recovery HP with a hot spare disks. By doing this, you will not have to reinstall Windows 8 after the update. You can also try the true correct BIOS since the BIOS HP softpaq and create media bootable with the BIOS and flash of routine. THIS IS NOT RECOMMENDED! You assume all risk of damage to your computer.

  Please send Bravo

• Freezing and slow: would not update Bios using Windows 7? Could not find a...

  I had problems with horrible or recurring virus on my HP Pavilion 061 (RK551AA-ABAa1648x) so I installed Windows 7 32 bit.  The system is now incompatible: it runs slowly, often hangs and can be difficult to start.  I tried a BIOS updated, but it does not exist?  This seems strange - my current version is 3.06 14/07/2006.  I updated the NVIDIA chipset driver.  I intend to install 2 GB of additional RAM.  Then it is true that it is not a BIOS available updated?  All suggested fixes?

  I suggest that you back up your data and make a complete reformat of your hard drive. Then re - install W7.

• DV6-2018ax Original BIOS for Windows Vista 32 bit

  I tried for hours to find the original BIOS for DV6-2018AX (windows 32-bit vista) without success. I know that there is no update BIOS... I'm not interested, in that, just the bios it is out of the factory with. If someone could help me I would be very much appreciated. It is a USB flash... As I can't recover the BIOS by normal means. Thank you.

  All versions of BIOS for your model are shown here:

  http://h10025.www1.HP.com/ewfrf/WC/previousVersions?softwareitem=ob-83686-1&CC=US&DLC=en&LC=en&os=4063&Product=4059867&sw_lang=

• Portege R700 - need drivers for Windows 7 32 bit

  Hello

  I got the new R700 I develop a version of Windows 7 Enterprise for and I can't find the driver files or install correct programs for the 32-bit version of the TOSHIBA fingerprint utility. I found the download for the R700 on the US site, and while this installs, it doesn't have the 32-bit driver for fingerprint reader in the R700. Can someone direct me to the correct download, or display the x 86 download the site of NZ?

  BTW - the x 64 download works fine if I install Windows 7 Ent x 64 and install it.

  Model number = PT311A-00J00Q
  Component = AES1660 authentic Tec Inc.
  PCI device ID = USB\VID_08FF & PID_168B

  Thank you

  Hey,.

  Usually, your exact model number is listed in the Australian page it seems you have an Australian model:
  http://www.MyToshiba.com.au

  The problem is that I can t find any 32-bit drivers it :(

  So I checked the European page where I found a similar model, PT311E. There you can download Fingerprint Utility for Windows 7 32 bit, it s is available!
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios
  Laptop > Portege > Portege R Series > Portege R700 > PT311E > Windows 7 32 bit

  Check this box!

• Update error 800b0100 Windows 7 64-bit Code

  I also get the error code 8 - B0100 for these 2 updates - KB983590 and KB982799. Looking at the history, I see chess begins on 11/08/2010. I downloaded and installed system update readiness tool. That did not work. I tried to install it manually, which did not work. I have Windows 7 64 bit on a Dell laptop. I have McAfee Security Center. I tried to disable it, still get not to install the update.

  sharrone,

  Code error 800b0100 installing KB983590

  See if this sugesstion can help you to:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/b577786a-682c-40DF-9212-c7d94418aa10>

• Windows Update stopped working Windows 7 64 bit

  Hello

  I'm currently under Windows 7 64-bit and Windows Update stopped working. When I open Windows Update and click on ' Check for updates ' I get an error message stating "Windows Update cannot currently check for updates, because the service is not running." "You may need to restart you computer. After the restart of several times there is no change. I use Vipre Antivirus and Windows Firewall, I think. Any help would be great.
  Thank you
  Doug

  Deletion of c:\windows\softwaredistribution\datastore\logs\edb.log

  Reboot and try...

• Photoshop CS5 update works only Windows 8 64-bit, the mistake of downloading of updates

  I ve spent on Windows 7 32-bit to 64-bit Windows 8. From this point of updates reported an error for all the components to download. I ve downloaded all updates und saved. Report is always the same

  If you have downloaded successfully, uninstall ps cs5, clean (http://www.adobe.com/support/contact/cscleanertool.html), and then reinstall.  then update your direct downloads.