Portege M800: webcam does not work with Win 7 64 bit - webcam driver open failed

Similar Questions

• Satellite A500-1f5 - FN key does not work with Win 7 64 bit

  Hello

  The FN key does not work

  I have the installer: added value package + Flash Cards Support utility

  Laptop model: Satellite A500-1f5

  WIN 7 64 bit

  Thank you

  Hello

  Try restarting Flash cards.
  Start > all programs > Toshiba > utilities > restart Flash cards.
  After doing this press FN button several times.

  or remove the vap utility and support of flashcard and download:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Then install the utiliy and flashcard Vap, support.

• Monitor all-in-one Epson Stylus CX3900 printer ink does not work with win 7

  Ink monitor does not work with win 7. It is connected to a pc win 7 and the ink monitor does not work on the two win xp computers on the same network.

  There are Windows 7 drivers here...

  http://tech.Epson.com.au/downloads/category.asp?sCategory=Multi_Functional&ID=styluscx3900&SelOS=Y

  Have you tried?

  Generally, functions such as ink levels work only on the host with the full support of the package installed and is not available for all computers that are connected to the host of the printer.

• My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  Visit the HP website and look.

• Satellite A300 - built-in Chicony webcam does not work with Win Live Messenger

  Hello

  I just bought a * Satellite A300-1MC * (works on Vista Home Premium) and downloaded Windows Live Mail and Live Messenger.
  The integrated webcam does not work with Live Messenger; and when you select the tool, Audi + Vieo Setup in Messenger I get thye following message: "we are unable to launch the Audi video installation.
  The webcam works fine with the Camera Assistant Software.

  I tried: 1) killing the AC software and from Messenger. (2) dowanloading one driver webcam Toshiba Web site; (3) update of Windows Vista
  None of the above works.
  Any suggestion received with joy...
  Thomas

  You can try to install the CAM such as ManyCams software - http://www.manycam.com/
  Basically, the program to access your webcam video and redistribute it as a video device ManyCam.

  Richard S.

• DeskJet 712c does not work with Win 7

  I recently switched to a new win 7 Home Premium SP1 (64) my old XP computer which worked well with my printer.  The printer does not work with the new OS and the computer.  Even if the computer indicates that the device is functioning normally, the printer will not accept print orders.  Not even the printer print test.  There is no error reports but the system behaves as if the usb is not connected, even though it is.   There were no changes in connectivity before or after installing new software (or trying) trying to get the new computer set up.

  I just found it and tried the wizard of the printer which also implies that the usb is not connected even though it is.

  The compatibility options have done nothing to help.

  Tara,.

  EUREKA!  At the risk of party too early, it seems that I am able to print with my new computer (HP).  Fixed after almost endless hours trying to get my printer to work despite many internet messages saying it could not be done and other giving solutions that didn't work.

  Why o ' why the solution apparently a hidden secret and why the tools did not work?

  In any case, thank you very much.  With all the problems I'm having to migrate to Windows 7, it's a very important achievement.  Thank you, thank you.

  Chuck

• Portege M200 - pen does not work with the screen

  So I bought a pen for M200 and reinstalled the operating system.
  Now I M200 with Windows XP Tablet PC edition, a utility Screen Rotation and usefulness of the stylus button. Now Pen buttons work fine with my new pen, but the screen itself does not work. I mean, the stylus does not work with the screen.

  I have a mouse, and another menu pointing devices in Device Manager and it includes the following submenus:

  HID compatible mouse (I use the random DELL mouse)
  Mouse PS/2 Cimpatible (?)
  --------

  I think there must be something else...
  Please tell me, forum, what drivers should I download to get the pen to work?

  Stand by. Are you using the original image of recovery Toshiba (operating system) or you have installed your version?

• I have a HP 3970 scanner that does not work with Win 7.

  My new computer came with win 7 is installed.  I have a HP 3970 flatbed scanner

  It will not work with win 7.  Before that I had win xp and the scanner worked fine.

  How can I solve this problem?

  Hello

  It probably won't work because they don't have windows 7 drivers written for her by HP

  HP has written drivers for their products non-microsoft

  read the information about the available drivers below

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=298549&TaskID=135&prodTypeId=15179&prodSeriesId=298547&submit.y=1&submit.x=6&lang=en&cc=us

  You can try the vista drivers or contact HP or buy a new scanner

• Shaker movie 3.1 does not work with Windows 7 64 bit

  I have a DCR - IP5 camcorder and shaker movie 3.1 does not work with the 64 bit version of Windows 7. Is it possible to make it work.

  
  

• "Display name only exact match" does not work in Win 7 64 bit either.

  I know that this has been reported as not working not not in Vista 64-bit, but I just wanted to confirm that it is one bug for others using Win 7 64 - bit as well.  When you select it, it will be checked, but guard the list all supported files.

  Always have this problem after the most recent update.

  It does not work in Windows 7, 32-bit or 64.

• Portege M600 - Webcam driver open fail on Windows 7

  Hello

  I have a Portege M600 and already installed Windows 7 [RTM]. After that windows update works well for all material certified with Microsoft, but when I try to used by webcam, the program display an error message:
  He says 'webcam driver open fail. Please restart camera or computer.

  Then I stop and repeat until twice but nothing happened and shows the same error. I control peripheral works properly. I already reinstall the webcam software too.
  For any idea or suggestion?

  PS:
  I used the Vista 32 software as default driver

  Thank you

  Hello

  I completely agree with Akuma you should try Windows 7 beta driver for the Chicony webcam from the Toshiba page we:
  http://www.CSD.Toshiba.com

  But do not forget that Windows 7 isn't out yet so it s a little difficult to get drivers tested for it.

  In addition, it would be interesting to know if the same thing happens with the factory settings.

  Good bye

• Portege Z30-C-12Z cam does not work with Win 10

  Hello!
  I have a problem with my Portege Z30-C-12Z. Camera in win10 does not work.
  Error code: 0xA00F4273. Have tried all the following steps: http://answers.microsoft.com/en-us/w...0-71c220c123a9 and like many more check the BIOS etc.

  According to me, I tried and everything, checked it please help!

  Try this:
  Type of storage in the search window and go to the storage system settings page. Make sure that the economy sites point to existing folders.
  I moved the files on a SD card and the camera could not find the folder of photos. Also, I've seen the suggestion to check that the folder of photos contains the security settings to allow access.

  If still no good, remove the driver of the webcam from the Control Panel, then let Windows Update to install a driver for the webcam update.

  Reinstall the camera application can also help.

• Qosmio F60 - 14Q - FN key does not work with Win 8.1

  Hello

  FN key does not work when I press the FN + F1 keys... F12 after installation win 8.1 instead of win7 which originated with my camera.
  is it possible to make it work even once with 8.1 win and if I need your instructions.

  Can you please tell us what model of laptop do you have?
  Your machine is supported for the own Win8.1 version? Did you check that?

• Satellite P105 carpet * a dvd player does not work with Win 7

  Greetings,

  I need an upgrade on my dvd to my vintage Satellite P105.
  I want the possible fastest dvd burner right now because I'm a fan of film and keep them in digital memory.

  (1) first should I get an external drive or can I get the best performance with an internal dvd replacement of a reseller of parts or Toshiba?

  The problem is when I've upgraded to windows 7 things have changed. I lost my sound, but that solved using a driver inherited Visa as apparently the sound 'Council' on the laptop is for Vista only. Then I found the dvd player which is a mitsu * an internal UJ-450 does not or is extremely slow in saving films, records or files. The available recording software seems also planned for Vista performance was acceptable. Even the dvd burning software does not work.

  (2) so my question for multimedia specialists is: what should be my next move?

  (3) should I go outside and confront the neck of the bottle USB or

  (4) to make the speed of the bus on the internal dvd?

  (5) given an internal dvd is preferable, because it's exactly a dvd-ram/IDE as it is currently, or some other configuration of bus.

  (6) most importantly, what dvd burner would give me 18 x speed with current programs like ConvertXtoDVD and did as a symbol external or - better - as an internal dvd replacement or my slow drive currently?

  Of course, if you could give me a model number and direct me to the sales it would be much appreciated.

  Thank you in advance.

  Rachel_1

  > 1) first of all I should go for an external drive or can I get optimal performance with a dvd replacement internal to a coin dealer or Toshiba?

  You should know that not all internal STRANGE machines are compatible. You will need to use a not compatible and supported and such device could be ordered in a local ASP.
  But it s more expensive as an external CD/DVD device so you could also choose an external that would be compatible with all computers and laptops available.

  (> 2) so, my question for multimedia specialists is: what should be my next move?
  As mentioned. Good option would be to buy an external burner drive ODD

  (> 3) should I go outside and confront the neck of the bottle USB or
  External device are compatible with all computers and are less expensive

  (> 4) go to the speed of the bus on the internal dvd?
  If you have the money for an internal device and want to use it with P105 only then you can also choose an internal burner.

  (> 5) because a dvd internal is preferable, because it is exactly a dvd-ram/IDE as it is currently, or some other configuration of bus.
  As far as I know it s an IDE interface, but the device would support setting master or slave or c - salt. As mentioned, you can buy a Toshiba a recommended.

  (> 6) especially, what dvd burner would give me 18 x speed with current programs like ConvertXtoDVD and did as a symbol external or - better - as an internal dvd replacement or my slow drive currently?
  Point 5 of the air)

• Satellite A300 - 1GN PASGCE - LED light button does not work with Win 7

  I improve my laptop for windows 7 everything works fine but the touchpad multimedia light led power button does not work.
  Play, stop, next work earlier but not the light / off does not work.

  No idea why?

  Hello

  Maybe it's a question of s a Win 7.
  I mean that the software is not intended for Win 7 but only for Vista.

  But you should check if you can reconfigure this button again.
  In Toshiba Assist-> optimize, you can find the Support of Toshiba Button tool.
  This tool can be used for the new configuration of the control buttons.

  First click on the button that you want to reconfigure and target path you can then choose the path to the exe file that must be executed by pressing this button.

  As far as I know that the exe files are placed in the program files/Toshiba/TSB folder.

  You will find different applications and one of these applications control the light on/off.