Portege R100: fan and screen

Similar Questions

• Portege R100: FDISK and format HDD takes a long time

  I have a Portege R100 and when I tried executing FDISK it will take a lot of time to create a DOS partition.

  After executing FDISK, I tried to FORMAT the HD and takes more than 6 hours to format the hard drive.
  After Format, I tried to load Win XP but it hanged system with loading messages files...

  Could someone hep me

  Hello

  Why you do not restore CD to create new partitions? It can be done very quickly. This option is available in the installation in Expert mode.

  Time FDISK is long gone. :)

• Portege M400: questions about fan and screen buttons

  Hello

  I just received a M400 and experience a great tablet, but I have two problems.

  Fan seems to be always, no matter how hot the cpu or the performance.

  buttons on the screen, specially the control stick, do not work after some time of use, a reboot usually solves it.

  I tried to reinstall the drivers as suggested on other forums, without success. It looks like a driver problem.

  Any ideas?

  Thanks in advance.
  LUIS

  Hello

  Hello guys. Fans are running because of the temperature inside the laptop.
  @Nicknick1: you are using the joystick. In this case, I guess you play. All series device with a maximum performance during the game. It s wasn't that asking the fans to run all the time.

  However: I put t know how much standby power version you have, but you will find on the page of the Toshiba driver the V7.08.00 changed to 17/03/06

  Concerning

  PS: Don't forget to check on the page installation instructions

• Portege R100 - Random Blue Screen of Death (IRQL not less or equivalent)

  Hello

  I've been making 'Blue Screen of Death' screens random in the last few weeks. The error is "IRQL not less or equal ' and it performs a memory dump each time. If I get the error and try to restart the phone after, I usually get the same screen of "Blue Screen of Death" when starting.

  I have not installed new hardware lately. Last update about a year; upgrade memory. I tried to replace the RAM with a spare that I had and I was still getting the same error.
  I have not installed new software in the last weeks, which would coincide with this error.

  I am tracking the temperature of the processor and I'm higher than 48 degrees Celsius.
  I'm not an expert, but I guess it's purely a hardware problem? As I rarely hear the CPU fan, I thought it might be overheating of the CPU.

  But even after that make the CPU fan to operate at 100% using a free software called "Fan speed" I always got the same random screen of 'Blue Screen of Death'.

  I would really appreciate any feedback and assistance. Really, I love my R100 and want to fix it.

  Select this option.

  Hey,.

  > If it's the memory controller can it be replaced?
  No, you can only replace the motherboard together. The memory controller is a part of it and it of not possible to replace the memory controller only.

  Theoretically, it could be the motherboard (memory controller) to malfunction if Memtest86 errors even you have replaced the RAM already.

  But 100% sure answer you can get a service provider approved because they have professional diagnostic tools.
  Then get in touch with the guy and ask for help. They can also order a new card of mother if she needs to be replaced.

• Portege R100 - how to install after Exchange of HARD drive?

  Hello world
  I'm new to this forum and I want to know exactly where I'm wrong. I have this portege r100 laptop and the hard drive gave a few days ago. Because I am a novice when it comes to computers, I left the laptop with an engineer, that I found on Kijiji.
  Unfortunately, the engineer could not load any operating system on it. I go through this forum and loads found useful answers, but alas, still the same problem.
  Could someone guide me in the right direction. I would be really grateful that I have exams coming next week and really need the laptop.

  I don't have any CD-ROM compatiable only an external floppy drive.
  I tried to install using the windows startup disk (x 6 downloaded from the microsoft Web site), but after the 6 disc it asks me 3 options.

  1. press ENTER to install
  2. recovery console option of
  Output 3.F3

  When I press on enter is not superimposed my cd rom which I figured out is not compatiable. If I leave the connected cd rom it says unmountable boot disk. It gives me a bsod. Is there another way, I could install the operating system using only the FDD.
  I'd appreciate it really all the help of the experienced members of this forum.
  Thank you.

  First of all, you can not use any external CD/DVD drive... you must use a compatible and recommended by Toshiba.

  Secondly, I you could try to connect the HARD drive to another computer using the USB caddy.
  Then copy the i386 to the HARD disk folder.
  Then, you can run the winnt.exe file to start the Setup program.

  Once configuration is complete plug the HDD to the Portege and tries to start
  It is only theory, but maybe it won't work

• Portege R100: Bluetooh/WLAN 802 .11b/g Mini pCi card Combo available

  Hello

  does anyone know of a Mini-PCI solution, which combines a b/g WLAN Card with Bluetooth which is compatible with the R100?

  My new laptop has a bluetooth connection and a nice combination of WLAN/BT integrated in the R100 would be also cool that the R100 is. There are a few Combocards on eBay that are Mini-PCi cards, but I don't know if "mini-PCI" is a standard for all Mini PCi cards adapt the R100...

  Concerning

  Christian

  Hmm, I searched a bit for some information on the Portege R100 series and it seems that BT is not available and not extensible. This would mean that there is no room for the internal minPCI BT module.

  The WiFi network is available but not BT ;(

  In my opinion, you need to use an external solution such as a stick USB BT.

  Best regards

• Portege R100 and external 17 '' LCD - cannot set the resolution of the screen to the right

  A 17 "LCD is connected to my Portege R100 via the port replicator. The native resolution is 1280 x 1024. But the actual resolution is only 1024 x 768. The LCD screen can adjust images automatically. Actual resolution can be verified by LCD menu. This distorted text on external LCD.

  I put the exteranl LCD resolution at 1280 x 1024 on panel--> display--> setting...
  The version of the video driver is v6.4823 - 104.22_2. BIOS, common module, Toshiba screen device Cahange the Toshiba Hotkey utility for display were all updated to the latest version.

  I used Fn + F5 combination to switch between display modes: Simoutaneous, external monitor only. This has not fixed the problem.

  Someone has an idea?

  Thank you very much in advance.

  Hello

  The preferred resolution is not available on the external screen because the display driver that is installed on the laptop does not support!
  The external monitor is able to manage the 1280 x 1024, but if this resolution is not listed in the display driver, then you will not be able to choose!

• Portege R100 freezes - CPU fan is defective?

  I ' v was Portege R100s for a long time, maybe 7 years old, I am at my last one.

  I'll be back from it after eating and the XP screen froze, no mouse movement, CntrlAltDel did nothing. Press and hold the power button it stopped.

  Now I can start, but it freezes again in a very short time, a few minutes. I'm guessing that the processor fan is stopped.
  Not tht sounds good to people, it's a realistic possibility to cannibalize the carcass of my previous and hang the fan of my current group?

  Thank you

  Of course, it could be linked to the question of the CPU.
  If the CPU wouldn't be cooled correctly then the system can stop to answer.

  Are you sure that the fan has stopped working?
  If yes then the cooling module must be checked and replaced by the compatible.
  You may not use the cooling modules. It should be compatible.

  But to be honest, I think that the RAM modules need to be checked also
  In most cases, a RAM problem is more realistic as a defective cooling module

  My old laptop has stopped working because one of the RAM slot is faulty
  I delete a module and the laptop worked using a single module of RAM
  However, I couldn't use it as I wanted and I bought the new notebook.

• USB 2.0 blue screens on Portege R100

  Hello
  I have a Portege R100, when you insert a USB 2.0 device it blue screens and you can t do something. But if you insert a USB 1.1 device, he is very well, I tried the upgrade to Windows XP sp2 and this t hasn't helped any ideas.

  Thansks

  Hello

  Try to remove the USB entries in Device Manager, and then restart the device. The ports should be recognized and installed correctly. In my view, it cannot happen without any reason. It will be interesting to know since when this problem started.

• Portege R100 - need help with the identification of the screen

  Have an import Portege R100 I bought with replacement screen which is where the nightmare begins, screen has not taken straight and probably is not correct.
  It is a size of 12 inches which is correct, but I can't have someone to tell me what laptop this screen is for. It has all the numbers, etc. on the back and a genuine Toshiba is in the screen at the Japan.

  If anyone has any ideas let me know then that the number on the back of the screen to use as id.

  What numbers so that you see on the original screen?

  Maybe someone here will recognize a number.

• Various installation with the Portege R100 and Windows XP issues

  Hello

  I recently bought a used Portege R100. It came without OS and I wanted to install XP SP2.

  I know that restorations only work with PCMCIA readers adapted, but the HARD drive is formatted, so there is no recovery possible I guess.
  Here are my problems:
  -with my very old Freecom PCMCIA CD player the Windows installation CD is recognized, and it starts to load the XP drivers until he wants to start copying files installiation--> then I get the blue screen of Windows with the error 00 x 7 (virus or driver)
  -the same thing happens with my former W2k Pro installation disc.
  -With the even more ancient W98SE, strange things are happening too: installation seems to work fine, but when it comes to start with W98SE, for the first time, the system hangs up with pixelgarbage.
  -Make the 6 Bootdisks with makeboot doesn't work anymore.
  -J' also tried MS-DOS! And guess what! It worked! Loading the Freecom drivers and copy of Windows I386 folder on my hard drive with the volkov Commander (something similar to NortonCommander) worked too! So I got hav files on my drive but after running Windows NT in the i386 folder, the system hangs after some time, when it starts to copy the files to a temporary folder.

  So I tried almost everything I know. at this moment I am download knoppix to try it.

  I ran Memtest86 and 9 Diskmanager to test the RAM and HARD drive, finished two withut errors, so the priority of main parts in the installation process seems to work. Maybe it's that my IDE controller is broken?
  I have no idea, WHY does he not move windows!

  Help is hot!

  Thank you

  Christian
  Does

  It should work out that way, run you own your HD first in Fat32format - file-system, otherwise it won't work!
  Don't forget to use "smartdrive' in your BACK-commissioning, otherwise it will take a lot of time, even the 'freeze' is possible.

  See also: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232

• Portege R100 and Linux - function keys not working do not and the latest version of the BIOS?

  Hello world

  I have a Portege R100 (PPR10L-13G10P). I am trying to install Linux and when you try to access function keys (F6) the computer does not allow me to... no idea why?

  Also, what is the latest version of BIOS for this computer? And where it can be downloaded?

  Thanks in advance!

  Terrence

  Hello

  At first, I must say that Toshiba doesn't support Linux in general if you are alone with this problem.
  I hope that someone will be able to help you a bit.
  If you want to discover the latest version of the BIOS, just enter the BIOS settings and check it out.
  BIOS version latest won't help you at all, so my opinion is that you shouldn't change anything.

  Anyway, the bio download page is - http://www.toshiba.eu/innovation/download_bios.jsp

  The feature keys F is supported by special tool Windows and it only works on Windows.

• Portege R835-P88 - keyboard and screen replacement

  Hello!

  I own a R835-p88, which in US, I bought a year ago. Because I had a food spill last week on the laptop, now I need to replace the keyboard and screen. As I live in the UK, I would like to buy in the UK.

  My question is:
  TOSHIBA P000540040 KEYBOARDOEM for Portege R705 R830, R835 (UK) will be a replacement http://www.ebay.co.uk/itm/New-Toshiba-Portege-R830-UK-Original-Genuine-Keyboard-/110758413538?pt=UK_Computing_Laptop_Keyboards&hash = item19c9b744e2?

  Also for the LCD screen would be
  nels http://www.eBay.co.uk/ITM/New-A-13-3-Laptop-LCD-Screen-Display-for-Toshiba-Portege-R705-R830-R835-/321162565111?PT=UK_Computing_Laptop_Screens_LCD_Pa & hash = item4ac6c7d5f7
  It will be a match?

  Thank you!

  Parts for Portege R830 should be compatible with the R835 too.
  Usually, it's the same series but released in another region.

  The screen seems to be compatible with the Portege R705 and R830, R835 series.
  This is why it should be compatible with your model too.

• Portege R100 and new hard drive

  I think to put in a larger capacity internal hard drive - 40G is now a little bit :(

  Does anyone do this? The traps? Any suggestions on compatible drives?

  TIA

  Hello

  As far as I know the old Portege R100 supported a HDD IDE controller.
  So you will definitely need an IDE HDD. I think that it s a 1.8 IDE HDD.

  I think the HDD IDE controller supports only the 28-bit LBA and it would mean that there would be larger than 120 GB hard drives not recognized.

  That's why I choose smaller hard drives.

• Portege R100 and RIPREP

  Hello

  I'm having a problem with RIS and my laptop Toshiba Portege R100. When I try to extract an image from the notebook using riprep, it keeps failing. This happens even with a vanilla XP installation. All other my laptop works very well except this model.

  I noticed that since the file riprep.sif the last lines are missing from the torn picture failure. A successful image should look like this:

  [OSChooser]
  Description = "test image - Toshiba R100"
  Help =' '
  LaunchFile ="%INSTALLPATH%\%MACHINETYPE%\templates\startrom.c om»
  ImageType = SYSPREP
  Version = "5.1 (2600) '"
  SysPrepSystemRoot = "Mirror1\UserData\WINDOWS".
  HalName = halacpi.dll
  ProductType = 0

  An image failed would replace the last few lines with the following information:

  [OSChooser]
  Description = "Windows Professional.
  Help = "this will install Windows Professional in a standard configuration.
  LaunchFile = "%INSTALLPATH%\%MACHINETYPE%\templates\startrom.co m '.
  ImageType = "Flat".

  I also checked the riprep.log file to see if there was no problem there. There are some services that were not arrested before the images were torn off. However, these services also appear in other newspapers of riprep files other images which have succeeded. I also stopped these services before starting the imaging process, but the problem persists.

  I rip an image successfully just now. I showed a colleague what happens when I tried using riprep, and it worked. I was pretty stripped, but this was the first and last time.

  I should also mention that the configuration of the network is DHCP statistics. I also tried to give a static IP address.

  Any help would be appreciated.

  If you need further information do not hesitate to contact me.

  Hello

  I'm not familiar with this, but please check this Microsoft article http://support.microsoft.com/default.aspx?scid=kb;en-us;304992.

  Also check this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5558&messageID=19046#19046 topic

  Good bye