Portege R100 freezes - CPU fan is defective?

Similar Questions

• Portege R700 - high CPU fan noise

  Hello

  I own the Canadian version of the Portege R700, called Tecra R700 (PT319C-00E002).
  The CPU fan always runs between 43 percent and 51 percent (regardless of the mode of selected frequency), which makes the noisy computer - too noisy to be used comfortably, too noisy to be used at meetings of air-conditioned silent.

  The fan seems to be controlled by the BIOS, as well as applications such as SpeedFan are unnecessary. Is there a way to fix this?

  Kind regards.

  Hi dernierrecours,

  > CPU fan always running between 43 percent and 51 percent (regardless of the selected frequency mode)
  This means that the fan runs always at the same level regardless cooling method that you can choose in Windows power management?

  Well, have you tried updating the BIOS? The latest version is installed?
  Check out the Toshiba page for an update.

• Portege R830 freezes and fan becomes strong with Win8

  Hello

  my model is PT321A - 01 K 002, I clean installed Windows 8 x 64 and installed all the drivers Windows Toshiba last 8 in the order correct, as specified in the instructions installation, but after a while, the CPU fan becomes noisy and the system hangs.
  Can someone help me please, it is the order that I have installed the drivers.

  1. net Framework 3.5. *
  2 chipset SW utility to install
  3 Intel Management Engine Interface
  4. Intel driver
  5 Intel Rapid Storage Technology driver
  6 Intel Wireless LAN Driver
  7 Intel LAN Driver
  8 TOSHIBA Value Added Package
  9 TOSHIBA Fingerprint Utility
  10 TFPU WBF fingerprint removal tool
  11. system of TOSHIBA driver
  12 TOSHIBA function key
  13 TOSHIBA HDD/SSD Alert
  14 O2Micro smart card reader driver
  15 Intel PROSet/Wireless WiMAX Software
  16 Ricoh card reader
  17. speech synthesis TOSHIBA
  18 Infineon TPM professional package
  19 TOSHIBA Service Station
  20 Intel AMT Software
  21 Synaptics Touch Pad Driver
  22 Realtek Audio Driver
  23 TOSHIBA Assist
  24 TOSHIBA security Assist
  25 TOSHIBA PC Health Monitor
  26 TOSHIBA sync utility
  27 TOSHIBA Sleep utility
  28 TOSHIBA HDD Protection
  29 TOSHIBA eco Utility
  30 TOSHIBA Web Camera Application
  31. TOSHIBA VIDEO PLAYER *.
  32 Broadcom Wireless LAN Driver
  33 Atheros Bluetooth Driver Package Filter
  34 Bluetooth Stack for Windows by Toshiba
  35 Intel Wireless Display
  36 TOSHIBA Assist Office
  37 TOSHIBA subway tile cleaning utility

  *@JuergenB*
  In your other thread, I posted my opinion on this matter.
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=69807
  You should try to run real strong. Press the Win + X key, then choose stop down in the charming bar.

• Portege R100: fan and screen

  My portege r100 fan no longer works and I wonder to the service change only the fan or the mainboard... and my screen has 24 dead pixels color do that I have to do
  Kind regards

  Hi Murat,

  From my experience, repairers will be the fastest option for them and not the cheapest for you. If your fan can be replaced easily without changing the motherboard, then it is what they will do.

  In regards to your dead pixels, the only real solution is to replace the screen.

  I think that it is a job more suited to a Service Agent

  HTH

• Portege R100 - CPU usage 100%

  Hello!

  Everyone knows about this problem?
  My Portege R100 after installing the new copy of Windows XP and directly after the installation of the display driver, Trident (reboot) bizarre behavior.

  Welcome screen goes white on the lower part (when the first yellow line is). Then I have some software problems.

  When to start records search engine, when I update the list of wireless networks and I explore the files by clicking on 'My computer', (this does not happen when I right click on START and 'Explore') displays CPU usage 100% and everything is so slow that I can barely move a cursor.

  Everything goes back to normal once I closed above applications.
  I can install all drivers and all right, but after Trident display it is bad.

  This is the driver I use since I bought the laptop, I do not know that is fine.
  I installed it several times before and I have a few copies of it, which I've already tried so it must be good.

  The cross thing only my mind is a hardware failure.
  Someone of you knows than before?

  Thank you...

  It has nothing to do with your computer - this is the trident driver problem - there is a work - around
  Try changing your display configuration-

  (1) right click on your mouse to the desktop to bring up the display property, and then click Advanced - here, you will see a tab say somethng like 'graphic acceleration.
  (2) reduce the rate of acceleration - move the tab to the left - make sure it is not full
  (3) this trident driver can cause the BONE to redraw the screen whenever you move your mouse with some applications

  If my post is not detail for you
  Try google with the keyword "how to turn off the graphics acceleration in windows xp" - you will get some good instructions

  That will solve your problem!

  Good luck and enjoy your nice laptop!

  Arthur

• Portege R100 - CPU up to 100% usage during execution of foobar2000

  Hello!

  Everyone knows about this problem?
  My Portege R100 after installing the new copy of Windows XP and directly after the installation of the display driver, Trident (reboot) bizarre behavior.

  Welcome screen goes white on the lower part (when the first yellow line is). Then I have some software problems.

  When to begin the file search engine, when I update the list of wireless networks and when I add files to foobar 2000, CPU usage shows 100% and everything is so slow that I can barely move a cursor.

  Everything goes back to normal once I closed above applications.
  I can install all drivers and all right, but after Trident display it is bad.

  This is the driver I use since I bought the laptop, I do not know that is fine.
  I installed it several times before and I have a few copies of it, which I've already tried so it must be good.

  The cross thing only my mind is a hardware failure.
  Someone of you knows than before?

  Thank you...

  Hello

  Foobar2000 is unknown to me and have no experience with this tool, but it is clear to me.
  You said that the CPU goes up to 100% when running this tool.

  Well, this tool is responsible for the use of the CPU! Why? I put t know.
  Maybe you should contact the manufacture of this software for more details!
  http://www.foobar2000.org/?page=support

  Good bye

• Portege R100 - defective headphone jack

  Headphone 3.5 mm on my R100 hole seems to be defective (I tried it with another helmet and with them the sound is distorted unless I managed to get the plug in the right position).

  I will provide Toshiba on this subject shortly, but I was just wondering if anyone could tell me if this component replacement is a simple procedure?

  Thank you very much.

  Hi Dan,.

  The headphone jack is a pretty basic device that can usually be bought quite cheaply from most electrical spare outlets. The real problem is to find a repairman that will repair to the component level. Nowadays, the trend is to replace a whole PCB rather than simply weld on a new component.

  According your description of the problem as it sounds as if we spring metal tags is either loose or bent and therefore does not sufficiently wityh contact the helmet when it is inserted.

  If your laptop is still under warranty, then it should be replaced at no charge.

  If your warranty has expired, it may be useful to check for repairers of local PC that quote ' component-level) repair services.

  Good luck

• Portege R100 - Random Blue Screen of Death (IRQL not less or equivalent)

  Hello

  I've been making 'Blue Screen of Death' screens random in the last few weeks. The error is "IRQL not less or equal ' and it performs a memory dump each time. If I get the error and try to restart the phone after, I usually get the same screen of "Blue Screen of Death" when starting.

  I have not installed new hardware lately. Last update about a year; upgrade memory. I tried to replace the RAM with a spare that I had and I was still getting the same error.
  I have not installed new software in the last weeks, which would coincide with this error.

  I am tracking the temperature of the processor and I'm higher than 48 degrees Celsius.
  I'm not an expert, but I guess it's purely a hardware problem? As I rarely hear the CPU fan, I thought it might be overheating of the CPU.

  But even after that make the CPU fan to operate at 100% using a free software called "Fan speed" I always got the same random screen of 'Blue Screen of Death'.

  I would really appreciate any feedback and assistance. Really, I love my R100 and want to fix it.

  Select this option.

  Hey,.

  > If it's the memory controller can it be replaced?
  No, you can only replace the motherboard together. The memory controller is a part of it and it of not possible to replace the memory controller only.

  Theoretically, it could be the motherboard (memory controller) to malfunction if Memtest86 errors even you have replaced the RAM already.

  But 100% sure answer you can get a service provider approved because they have professional diagnostic tools.
  Then get in touch with the guy and ask for help. They can also order a new card of mother if she needs to be replaced.

• Touchpad does not work on Portege R100

  Hello

  I have recently boght a Toshiba Portege R100 without any installation CD Windows XP Home Edition worked fine but the touchpad is not.

  I installed additional drivers of Toshiba. Now, I'm able to adapt to all kinds of things about the Touchpad, but still it does not work. I was also running Knoppix 5.2 since July 2007. Same problem with Linux.

  Have I not a faulty laptop? How will I know, please?

  Have you tested the touchpad with Windows XP?
  You connected an external USB mouse and you have the same problem?

  Normally the touchpad should work without a driver, they are part of the operating system.
  You can disable/enable it with FN + F9.
  I'm not sure, but you can also enable/disable the touchpad in the BIOS.

  It could be that the touchpad is defective, but ask an ASP for help. They can check the necessary parts for laptop and Exchange.

• Portege R100, PXE - boot problem - E61:Media Test failure, check cable

  My portege r100 4004GAH original hard drive has had some problems recently, so I decided to replace it with a bigger 4006GAH. Specifications, it seemed that it would be appropriate.

  So I tried to install standard windows top. Unfortunately as I soon discovered that didn't work and lead to BSOD. I looked online and remembered that I had in fact to use the recovery of three discs. Fortunately for me I still had the freshly sealed and I've also owned a combined remarkable Targus CD drive supported. If in the three discs are gone. All seemed well and after that the last drive ended, I was asked to remove the disc. The laptop has rebooted and then gave me the

  PXE - E61:Media Test failure, check cable
  PXE - M0F: Exit Intel PXE ROM
  Insert system disk
  Press a key to continue...

  I thought it might be in the order of start, but verified that and it seemed right. HD was first. I also changed the order and the same error came.
  I thought while another component of my laptop may be broken. So I put my old hard drive in. It started fine.
  The next thought that the new hard drive was defective.

  Fortunately, this is not the case. Because when I used the recovery disks not only heard disk hard turns to the top, but the hard drives were detected and recovery installation displays the correct memory size.

  I'm completely stumped on hat w what is the problem. Any help would be appreciated.

  It is not easy to say what the problem is but you said the Portege started fine with the old HDD. So I think that there is something wrong with the new.

  In your case I test the HARD drive with a special tool like Drive Fitness Test. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.
  http://www.HitachiGST.com/HDD/support/download.htm#DFT

  In addition I am interested in what you have the same problem with a Microsoft installation disc if you have one.
  So try if your HARD disk has no errors.

• Portege R100 install XP on the replacement drive

  Help, please

  My hard drive in my R100 went bad and I replaced it and it became a nightmare to install XP.

  I spent 2 days on this subject, and I can't break! I have the original Toshiba USB floppy drive that can be accessed by cell phone and a desktop USB external CD/DVD drive mounted in a USB chassis. It's the Sony DRU - 540A. I tried everything on this forum and it does not work.

  I copied the I386 folder in the C: / once I'd fdisk and formatted it and when windows was running from the CD it came to try to find the asms file. When I run the Portege R100 Recovery Bootdisk V1.1.zip he can see my Cd/DVD drive however the virtual D: it creates, causing the PC to freeze when I run Windows NT.

  Please help because it's pretty darn painful!

  Thanks Brendan

  Why would you copy the files from the CD to your HARD drive? To install an operating system, in your case Windows XP just boot from the CD and follow the instructions given by the installation routine.

  You can change the priority of booting into the BIOS settings, or by pressing the C key laptop start upward.

• Windows XP Setup stops with "Stop 0x0000007B" on Portege R100

  I have a Portege R111, but it is the same model as R100. I am trying to install WinXp on it, with a lot of problems.
  I have no CD to recover, but as I've read, it's possible.

  I use a PCMCIA-cd/dvd player. It starts fine, but after I get a blue screen with the error "* Stop 0x0000007B."
  On the microsoft home page, I've read a lot about this
  [http://support.microsoft.com/kb/324103/en]

  It seems that it is a problem with my hd, so I disassembled the 1.8 "HD and connected to my normal pc. Here, I could install WinXP without any problem.
  Then I reassembled the hd (with the top winxp system), but guess what, it doesn't. I just get get the menu in what mode I want to boot into windows (safe mode, safe mode with network,...). Whatever mode I select screen freezes after.

  I tried to run a normal linux (ram only) on it to see if that works. But it's not. The screen freezes while trying to load the kernel modules.

  Any ideas on how to solve this problem?

  Hi guys

  Portege R100 supports the recovery through the BIOS (by pressing 'C') with (16-bit and Cardbus) PCMCIA cards.
  Sequence of disks and controllers (PCMCIA) might work:
  (a) Toshiba, PX1055E-1NST SN: 3431490096 with PC Card (16 bit), II cable, PCMCIA, Rev.043.242
  (b) Toshiba, PX1055E-1NST with a CardBus, cable II, CARD BUS, Rev.136

  The drive used in conjunction with the PCMCIA controller is not so important due to the fact that the driver in the BIOS must allow the controller first. There is a generic CD-ROM drive implemented in the BIOS for the connected player. The "PC Card controller Mode" settings in the BIOS has been 'Automatic Selection '.
  This means that you have nothing to change in the BIOS, because it is the default value.

  It could happen, to connect the power supply in certain circumstances, for example:
  Battery is charged too less.
  The PCMCIA supplies unless energy location.
  If a player is used with a built in battery, please always connect an appropriate adapter.

• Various installation with the Portege R100 and Windows XP issues

  Hello

  I recently bought a used Portege R100. It came without OS and I wanted to install XP SP2.

  I know that restorations only work with PCMCIA readers adapted, but the HARD drive is formatted, so there is no recovery possible I guess.
  Here are my problems:
  -with my very old Freecom PCMCIA CD player the Windows installation CD is recognized, and it starts to load the XP drivers until he wants to start copying files installiation--> then I get the blue screen of Windows with the error 00 x 7 (virus or driver)
  -the same thing happens with my former W2k Pro installation disc.
  -With the even more ancient W98SE, strange things are happening too: installation seems to work fine, but when it comes to start with W98SE, for the first time, the system hangs up with pixelgarbage.
  -Make the 6 Bootdisks with makeboot doesn't work anymore.
  -J' also tried MS-DOS! And guess what! It worked! Loading the Freecom drivers and copy of Windows I386 folder on my hard drive with the volkov Commander (something similar to NortonCommander) worked too! So I got hav files on my drive but after running Windows NT in the i386 folder, the system hangs after some time, when it starts to copy the files to a temporary folder.

  So I tried almost everything I know. at this moment I am download knoppix to try it.

  I ran Memtest86 and 9 Diskmanager to test the RAM and HARD drive, finished two withut errors, so the priority of main parts in the installation process seems to work. Maybe it's that my IDE controller is broken?
  I have no idea, WHY does he not move windows!

  Help is hot!

  Thank you

  Christian
  Does

  It should work out that way, run you own your HD first in Fat32format - file-system, otherwise it won't work!
  Don't forget to use "smartdrive' in your BACK-commissioning, otherwise it will take a lot of time, even the 'freeze' is possible.

  See also: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232

• HP Pavilion DV6: at startup BIOS showing CPU fan has stopped working, but I checked the fan is in good condition

  Hello

  I bought my HP Pavilion dv6 laptop 2011 as it starts a is overheating, freezing windows with noisy fan sound etc... but now, on information in BIOS boot indicating that the CPU fan has stopped working so immediately, I checked that I couldn't hear any noise from fan and no symptoms as fan works so I disassembled my laptop and removed CPU cooler fan only. Simply with the help of the battery, I checked the CPU fan it is running perfectly alone. but it does not work with the laptop.

  Please help me and guide what is the cause of this problem and how to solve this problem.

  Gassab

  HI @Kartic

  Welcome to the HP Forums!

  This is a fantastic place to find answers and suggestions!
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  How can I find my model number or product number?

  I understand that since you had the laptop he had an overheating problem with a loud fan noise that causes freeze it.

  Recently, you have received the message that the CPU fan has stopped working and you couldn't hear the rotation of the fan to the top.

  You have removed the fan and checked, but the fan works.  It is possible that the connection was not safe in Notepad.

  Here is a link to an overheating and Auto Shutdown problem troubleshooting.

  Have you checked for an update of the bios of your laptop. You have provided the series of laptop you have, but not the exact model, so I'm not able to check it for you.

  You can run the Wizard to help HPin order to facilitate this process.

  Like a bios update has the potential to cause damage, you can contact HP technical support using this procedure.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Here is a link to the guide to maintenance and Service Guide HP Pavilion dv6000 Notebook PC for your laptop.

  You can replace the thermal paste on the processor. Here is a link to a YouTube video on this process.

  How to apply thermal paste

  Good luck!

• Operating at max speed CPU fan

  Greetings,

  I have a frined of mine has a problem with his pc which is the cpu fan works as max speed 3800 RPM even when cpu temp at 40 or 50 c or even less than 40 years. I used air can clean the radiator, and now I think of take out and apply new thermal paste.

  After using the PC for a long time it start freezing.

  What could cause this?

  PS. PC mobo is this

  http://www.ASUS.com/motherboards/Intel_Socket_775/P5LD2/

  Thanks in advance

  Hi, AOG,.

  Reset the bios to default values (including all the bios profiles) and delete all the utilities of the could adjust the speed of the fan.  The overclocking utility is an example that could change the fan curve.

  Use the stock Intel heatsink?

  Try a couple of different temperature, followed problems to ensure that the CPU temperature is correct. CoreTemp, PC Wizard and real Temp might be good choices.  Some temporary programs are known to be buggy.

  Check the level of the bios of the motherboard against what has been posted.