Portege R200: Need keycodes for the mapping of the keys

Similar Questions

• Satellite A200 (PSAE6) - need drivers for the functional keys FN

  Please give me a link to this driver.j have windows 7 x 32 bits on my computer laptop a20 psae6... a device reinstal sistem and to reinstall driver and doesn t work... my sensor does not work...

  Hello

  You must download the VAP (value added package) and Flash memory card Support utility.
  These two tools are needed to get the keys FN working in Windows 7!
  I have A210. It s a similar series of laptop and I ve chosen drivers that are released for Satellite L500 series.

  These two tools worked for my A210

• need drivers for the following!

  need driver for the following equipment. in fact, it shows as unknown device in my Hp probook g1 450 4th generation i5.

  ACPI\HPQ6007
  * HPQ6007

  I would be happy if you please give me the link of the drivers.

  You need HP 3D DriveGuard on your list of pilot. Choose which operating system you are running and you will pass to the right page:

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?cc=us&lang=en&sp4ts.Oid=5405426&AC.admitted=1412400073783.876444892.199480143

• I need help for the upgrade of my current system.

  I need help for the upgrade of my current system.

  I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

  I want to make the larger environment using the following:

  (1) apply Virtualization

  (2) apply to the failover process (clustering)

  "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

  Storage 4) that supports Raid (1 and 5)

  UTM excellent 6) that supports (SSL VPN, VPN Global)

  suitable backup solution 7)

  (8) good antivirus for clients

  my questions:

  (1) can you provide me with a good design for this environment

  (2) should I choose what operating system:

  Microsoft datacenter or company

  I know datacenter provide us the unlimited VM but needs per processor license

  so if I have two Grouped servers I want to buy 4 licenses

  and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

  (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

  (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

  (5) what about win2k8 license for VM:

  lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

  (6) can I use backExec license for SBS with windows 2008 standard

  (7) who better to virtualization AMD or INTEL

  (8) hyper V or VMware?

  (9) what of Microsoft data protection Manager... is this good?

  (10) what virtual machine manager? What are the benefites keys

  Thanks in advance

  Hello AnasAI,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Need drivers for the Sidewinder Precision Pro X 03-57540

  I NEED DRIVERS FOR THE SIDEWINDER PRECISION PRO XO3-57540 JOY STICK.

  Hi LARRYPEDEN,

  Visit the following link to download the driver:

  http://www.Microsoft.com/hardware/en-us/d/SideWinder-X3-mouse

  You can also follow this step to do the same thing:

  a. double-click the type of device you want to update or change.

  b. right click on the device driver specific, you want to update or change.

  c. click put to update driver to open the Hardware Update Wizard. Follow the instructions in the wizard.

  More information on:

  How to manage devices in Windows XP

• Guard application launch at the start of the appliance, also need advice for the implementation of network methods

  Hi all

  I'm new to the development of Blackberry and I'm writing a relatively simple application to run on 7.1.

  So far the development was interesting, I managed to create my user interface using resources online (mainly this forum), but today I tried to implement some of the network classes that I need and now I just met constant problems.

  I use Eclipse SDK 3.7.2 (the one that comes with the plugin RIM)

  First question:

  I'm not sure what I changed, but today I noticed that whenever I start the Simulator (by sim 9360) my application is started during the initial startup process. I don't think he did this before, but to be honest, I wasn't paying much attention. I think it starts at the start of the device is because I put a breakpoint in the constructor for my class from the main screen, which is hit before the Simulator happens even to the point where it is ready for user interaction. In addition, once it is ready, if I press the BB button, I see my registered application.

  I don't have it set to automatic start in .xml descriptior enforcement.

  I started this application on the HelloBlackBerry sample, here is my main method for the entry of the application:

  public static void main( String[] args ) {
          appSettings = AppSettings.fetch();
          // Create a new instance of the application and make the currently
          // running thread the application's event dispatch thread.
          HelloBlackBerry theApp = new HelloBlackBerry();
          theApp.enterEventDispatcher();
          //openConnection();
  
      }
  
  
  

  As far as I know, this is the only entry point for the application.

  More code

      public HelloBlackBerry() {
          // Push a screen onto the UI stack for rendering.
          mainScreen = new ScreenHelloBlackBerry();
          pushScreen( mainScreen );
      }
  

  Here is the method of. my class AppSettings fetch()

      // Retrieves a copy of the effective properties set from storage.
      public static AppSettings fetch()
      {
          AppSettings savedSettings = (AppSettings) _store.getContents();
          return new AppSettings(savedSettings);
      }
  

  Some of this code that I wrote myself, the persistence store cause the launch of my car?

  I tried to reset the Simulator to the factory settings, no change.

  All applications initialized during the startup of the device and then closed shortly after?

  Part 2: Need advice for the implementation of functions of network in the application

  I need to implement some methods that will retrieve data from a web service, and I also need to send data to this service. What I've read, the ConnectionFactory is the way to go. I want my application to make a request when the application is open and can check on a set interval. I didn't know exactly how to go about adding another thread for networking, I understand that network connections should not be created on the thread main event, so I tried to do this:

  The constructor of my class that implements screen (ScreenHelloBlackBerry), I use the following to create a modal dialog box to prompt the user for a username, I also try networking wire in the same segment of spawning:

          public ScreenHelloBlackBerry(){...initialize fields and managers, add it all together...then near the end
  
  //This will open the confirm dialog when the application is launched
          UiApplication.getUiApplication().invokeLater(new Runnable() {
                public void run() {
                    openConfirmDialog();
                  //start connection - Possibly broken
                    ConnectionThread ct = new ConnectionThread();
                    ct.start();
                }
          });
  

  I don't know if it's somehow OK to do, but it seems to work for what I need. I want a user who launches the application at the prompt, and if a user switch applications, when they come back they wondered again (unless they close the app and reopen it).

  Here is my ConnectionThread:

  public class ConnectionThread extends Thread
  {
  
      public void run()
      {
  
            ConnectionFactory connFact = new ConnectionFactory();
            ConnectionDescriptor connDesc;
            connDesc = connFact.getConnection("http://www.google.com");
            if (connDesc != null)
            {
                HttpConnection httpConn;
                httpConn = (HttpConnection)connDesc.getConnection();
                try
                {
                    final int iResponseCode = httpConn.getResponseCode();
                    UiApplication.getUiApplication().invokeLater(new Runnable()
                    {
                        public void run()
                        {
                            Dialog.alert("Response code: " +
                                          Integer.toString(iResponseCode));
  
                        }
                     });
                    httpConn.close();
  
                 }
                 catch (IOException e)
                 {
                   System.err.println("Caught IOException: "
                        + e.getMessage());
                 }
            }
      }
  }
  

  At the moment it has basically unmodified code from a sample that I found, I'll be retooling to meet my needs whenever I can make it work. I HAD this work to the point where, after the closed user confirm this dialog, a few moments later a an alert dialog appears with the 302 response code. I don't know what changed, but now it doesn't work at all, and if I try to scroll with the debugger, I can't past the httpCon.getResponseCode (). I've seen some mistakes earlier on "no record of service was set up", and I also had once a timeout exception.

  I'm sure I'm doing this wrong, but at the same time as I said WAS working, and now it is not. If someone has done this far, thank you very much for your time and advice are much appreciated.

  Also, should I try to start the thread of the network of the UIApplication class instead of the screen? There is currently very little happening in the class that extends UIApplication, do I spend most of my business logic out of the class of the screen and in the UIApplication class?

  Thanks in advance!

  Hi all

  Just to conclude this topic for those who are interested, I found an excellent guide to the implementation of networks in applications of BB, click here for a link.

  About my application being started at the start of the simulator of the device, I found that on a device real this behavior is not complied with, and in addition, the behaviour seems to have stopped after uninstallation and reinstallation of my Simulator.

  See you soon,.

• Need drivers for the SATA hard/controller on the dv7-6c95dx disc.

  Need drivers for the SATA hard/controller on the dv7-6c95dx disc.

  We load Windows 7 Enterprise on these newly purchased laptops, but do it have not the required appropriate drivers detect the hard drive on them. Impossible to find on the HP website.

  You can refer to a completely different question here, Marty. I was installing to a flash drive and it turns out that my install media has been connected to ports USB 3.0 on the left rather than right 2.0 ports. Moving to the ancient ports of 2.0 has solved my problem. Good luck.

• I need images for the animation of the interactive book for words from A to Z.

  Hello

  I'm creating interactive children's book so I need images for the animation of anyone have idea where I can take the pictures than words from A to Z or any suggestion?

  Best thing to do is to simply do a search for 'Illustrations of Stock', like Google

  All the best.

• How to set the pressure necessary for the keys on the keyboard? I adjusted it 2 years when I had my Macbook Air, but I forgot how I did it. In my opinion, only a touch of F has been used.

  How to address the need to pressure for keys? I've adjusted it 2 years ago when I got my Macbook, but I forgot how. In my opinion, only a touch of F has been used.

  I don't know what you are referring. You can't 'adjust the need to pressure for the keys. The keyboard is what it is. The key must be pressed far enough for electric contact in key switches. The keys are not adjustable in this way.

• I have a pre-installed windows 8 pro in my VAIO E series and I had no problem with it until he says I need to activate the key...

  I have a pre-installed windows 8 pro in my VAIO E series and I had no problem with it until he says I need to activate the key. How will I know about the activation key if I don't have the CD? and he really gets on my nerves because very 15 minutes it would display the message that I need to activate the key making delays in my work.

  Hi Kia,

  We apologize for the inconvenience caused to you.

  I wish you contact the Sony Support to reactivate the windows because it's preinstalled software.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=FAQ

  Please reply with the status.

• Portege R200 - Display driver for Windows 7

  I upgrades the operating system on my Toshiba Portege R200 to Windows 7

  TThe BONE determined my monitor as generic, it does not allow more than display settings. I think I need to replace the driver. Toshiba has no update driver for this model

  Is there any equivalent elsewhere, or with toshiba under other models?

  Hey,.

  I agree with you, santhi_G. I checked the site Web of Toshiba Portege R200 drivers and there is no available drivers for Windows 7 or Vista same. Only XP and Windows 2000 is supported. :(

  I discovered that the Portege R200 Intel graphics so probably has that you can find a driver directly on the Intel Web site. It's worth a try ;)
  [www.intel.com]

• Portege R200 - how to replace the HARD drive

  Fundamental questions about the Toshiba Portege R200 (purchased model birthday Thailand August 2005) are:
  (1) Please provide instructions to remove the hard drive (non-functional) (illustrations if possible)
  (2) model has enough space inside for hard drive 2.5 inch? (Impossible to locate 1.8 inches and below, to get the results of [expensive] calls to Toshiba - of interest only)

  Background:
  (1) while 3 years warranty in force I trecked (expensive) of Malaysia in Bangok (where to buy) at the headquarters of Toshiba (if you know Bangkok taxi drivers, you'll know what a test or going around in circles and the nonsense in the fire that was)... Toshiba agreed HD vibrating but reported would take 3 to 10 weeks to get the HD replacement (!?)
  (2) I was a few weeks later to the r - u (to tie)... They told me they couldn't help; I "should contact my provider...". This is an Asian model, in Europe, we cannot... etc etc.
  (3) a week later the HD has no
  (4) I contacted Toshiba but they told me the warranty expired 7 days before...
  (5) since this time I phoned and was put on hold for Toshiba in the region of London (several times), Singapore (3 times), Thailand (well, if you know how it goes, say-no more, shots of elbow-boost)...

  I got nowhere. But were invited by the media to bring it to the headquarters of Thai (yet)... It's all right, I'll book a flight and hotel etc now, shouldn't cost all that much more than the computer cost me initially...

  Oh, another thing, not very important: to help out me, I bought a lighter machine at Toys R us... 300 quid... for the love of antiquity I always want to get the old dog to this shiny Silver Anniversary edition slim R200 works again...
  I have a 2.5 "HD available (recond and costs all 9 quid in Brummagem) but before I destroy the old R200 dog by ineptitude... (and lost to carefree annoyance no assistance of Toshiba)... and/or on how to remove HD, please?

  Hello

  I have seen words about your question.
  AFAIK the R200 was equipped with the utility of the HARD disk protection. It is a feature to reduce the risk of damage to the HARD disk.
  Using the acceleration sensor built into the computer drive HARD protection detect vibrations, shocks and sings in the computer and automatically moves the HDD Head somewhere course, in order to reduce the risk of damage.
  But this function does not ensure that the HARD drive will not damage! It reduces the risk of damage!

  However, the HARD drive can be removed very easily.
  At the bottom of the unit, you will find the HARD drive Bay. It s close to the battery (on the left).
  You need to remove two screws to get access to the HARD disk 1.8.

  PS: You can use disks hard only 1.8. The 2.5 hard drives are not compatible.
  I discovered that you can use a TOSHIBA 60GB 4,200 rpm 1.8 HDD HDD1544BZK01

  Welcome them

• Portege R200: How to reset the fingerprint reader?

  Hi, I got a damaged probably fixable Portege R200 (no, it's not stolen, legitimate sales). The machine does not start in its current state. If I fixed and find the fingerprint reader enabled, is it possible to erase it and start again (I'm not interested in the contents of the existing drive, I'm happy to format and reinstall a new OS image)

  Referring to the Toshiba are OK if that's what it takes, but I don't want to buy and spend more money if it is completely non-recoverable because of the safety lock fixing. Any advice or info much appreciated

  Thank you

  Ian

  Hello

  To the extent where I knew the Omnipass Fingerprint Reader utility is responsible for this security.
  This software is to be found in the control panel.
  You can add and remove profiles (user) and set the settings to encrypt/decrypt the contents of the hard drive.

  In my opinion he has no influence on the process of starting...

• Tecra R840 - need driver for the button control / stop Touchpad

  Which driver supports the switch for the touchpad?

  Hello

  If you ask a software / driver, then you should also publish information on your installed system.
  I assume that you have already installed the touchpad driver, in order to use the function keys, you need to install the VAP (value added package) as published by Liam

• Portege R700 - need driver from the chipset

  Hello

  I want to make an image of a * Toshiba Portégé R700 * in my Landesk 8.8 environment.

  I am looking for the chipset driver (* Intel (R) 5 series 6 Port SATA AHCI Controller *) to my laptop, but I can not find in the download page. I need somes files: txtsetup.oem and an iastor.sys

  How can I find if? Someone at - it a solution?

  Thank you
  Stéphane

  Hi Goldostef,

  Did you find similar topics on the SATA drivers? ;)

  The SATA drivers you want to say are part of the Intel Rapid Storage Technology driver and not the chipset drivers. So if please check again from Toshiba Web site and download it mentioned driver that contains the driver you are looking for.

  If you have any other questions, you can post again :)