Portege R400 - curriculum vitae of Windows Ultimate Standby - graphic resolution

Hello:

Sometimes, when Windows resume a standby mode / sleep, the resolution of the fall of the graphics card to 1024 x 1280 x... I have to hand, then change the resolution to 1280 x...

Any advice how to fix this?

Hello

Is your laptop Portege preinstalled with recovery DVDs or already has the factory settings?
I don't know if it will help, but try to install the latest display driver available on the Toshiba download page.

Tags: Toshiba

Similar Questions

  • Portege R400 - curriculum vitae of Windows Ultimate Standby - Flashcards crash

    Hello:

    After the release of the Windows Ultimate sleep / sleep, the Toshiba Flashcards ALWAYS crash. Does not help reinstall the package of added value.

    Any advice how to fix this?

    Hello

    From time to time check the knowledge base of Toshiba. You can find it under http://eu.computers.toshiba-europe.com > support & downloads

    I founded it described this bulletin to support Toshiba with the exact solution to the problem.
    Please check under http://support.toshiba-tro.de/kb0/TSB7701XB0005R01.htm

    Bye and good luck!

  • Portege R400: Very slow Performance with Vista Ultimate

    Hi all

    Portege R400 is delivered with Windows Vista Ultimate 32-bit Edition and Vista is really - honestly - incredibly slow! (especially with R400, due to the configuration of the laptop)
    So I decided to install Windows XP Tablet PC... But I discovered that there is no driver available for R400 XP.

    I'm not directly complaining on the Portege models/series...
    It's a great design and I bought it, knowing the configuration. But I didn't know how Vista was eager for system resources...

    I complain on Toshiba policy or what-so-ever ONLY to the Vista and not XP drivers.
    Microsoft is desperately trying to sell Vista because they know, they really don't have this time and I heard stories about how they block their own market XP.

    .. .and I think that Microsoft and Toshiba can have an agreement on "selling only computers laptop Vista..." (just a guess but it seems so... correct me if I'm wrong)

    It is a torture to use Vista on Portege R400 and other equivalent configurations. (even when all the Visual effects system, disabled etc.)
    On the other hand, I can't use my XP on R400 tablet... so...

    So, trust me when I say I'm going to throw it away!
    But before doing this, if anyone of you knows a solution to my problem. Please let me know,
    because I paid a lot of money for this turtle.

    concerning

    PS: I hope that this is a democratic platform and my post not be erased or changed.

    Hello

    First of all, you don't have to suspect Microsoft or Toshiba has an agreement with Vista. Toshiba isn't the only primary selling units with just a VIsta operating system, almost every laptop to the manufacturer it.
    And you're right, Vista is a slow operating system, because it has a new UI with lots of graphic effects here and there and many features like the sidebar, you have really not at all.

    Since I bought my first one Vista laptop at the beginning of the year, I thought, as I don't want to not be installed and want my XP back and so on and there was no available to manufacturers of XP drivers download page either. I have a Toshiba laptop no and had the same frustration as you.

    Now, I had two options, check every important feature on my own via google or using tools such as engineering pilot or pimp my Vista driver installation.
    Firstly I did an installation of XP, all drivers to research, I need, who did not take my as much as I thought it would be. But after a while, I wanted to give the new Microsoft OS a chance.

    Used disk recovery and first wiped all the software I didn't need, so goodbye almost every tool installed on my machine, which was not unique to microsoft.
    Disabled many features, that I didn't want and I can say, speed increased a lot! This brought my buy an original version of Vista, made a new installation, installed all the drivers necessary, and hey, I'm happy with it.

    Thus, ended with my story, you have two options now. Search XP drivers on your own, using the tools and google or tweak your Vista. There are many guides on the internet that can help you.

    And do not be angry with Toshiba, as it's the same problem with other manufacturers too, as you can see in my case.

    HomerJ

  • Lack of a modem 3G in Portege R400

    Dear experts!

    Model: Portege R400 (PPR40E-00T019RU)
    OS: Vista Ultimate 32 bit
    1. under the keyboard is the slot for SIM card,.
    2. on the front panel, a LED and Toshiba edge the pictogram of a cellular network that suggests presence 3 G modem in my copy of the notebook (but LED is off and pictogram shows the problem).

    However, this way:
    1. no IMEI anywhere on the case
    2. lack of the device (modem) in Device Manager
    3 connections 3 G absence on FN + F8 and FlashCard

    How to set, if is 3G, modem and if it is to know how to force it to work?

    Thanks for the replies

    Are you sure that the model has a 3 G Modem? The Modem 3 G can be an optional accessory.

    Google: PPR40E-00T019RU sheet

  • Portege R400 - Windows with WAN boot / 3G

    Hello

    I want to start windows on my portege R400, but with the LAN allows bluetooth and 3g disabled. Now all are activated after the start, and I have to stop the 3g using the cards on top of the screen. I want to just turn the turn on when I need it.

    I don't want to uninstall it, or stop the driver or service. I just want to start this option disabled and activate it via the menu or cards.

    Can someone tell me how to do this?

    Kind regards

    Gaston

    > I have to stop the 3g using the cards on top of the screen. I want to just turn the turn on when I need it.
    > I just want to start this option disabled and activate it via the menu or cards.
    If I understand you well you can enable/disable it through the cards.
    What do you want exactly? to have 3G turned off by default?

  • Can I order the disk for Portege R400 XP downgrade

    Is it possible to order XP downgrade disk for Portege R400?

    Hello

    I doubt that this is possible.
    Your Portege R400 was delivered with preinstalled Vista. Am I wrong?

    Well, as far as I know there is only one image of Toshiba for this model of laptop and it s only a VISTA 32 bit ULTIMATE.

    But of course, you could install the Win XP clean using the MS Windows XP disc.
    There is just one small problem; Win XP drivers are not released for the Portege R400 model. I didn t find on the European driver Toshiba page.

    So, you have to collect the drivers with your own hands

    See you soon

  • Portege R400 - I want to downgrade to XP

    Toshiba Portege R400, I bought over a year ago.
    He had installed vista and I ve worked about a month, but after installing a lot of software on I ve been working VERY SLOW.
    I decided to downgrade to XP, but Toshiba don t provide a downgrade installation media.
    Then contacted Microsoft official support and get an answer: you can use any legal installation media to downgrade.

    And when I asked to double activation I have another solution: I m contact Microsoft activation while support and explain my situation and tell my Vista CD key. They activate my Windows XP manually.

    It of so difficult to find support for Windows XP tablet pc in Russia in my city. But I ve found a friend and is like I said. Everything worked perfectly.

    But not for long, I have my Windows crashed and had to reinstall it. But now without any legal support original.
    After installing Windows XP SP3 I have a message on the the validation failure.

    I have more mates with any legal Windows XP tablet pc CD.
    I DO NOT WANT to buy another OS to this laptop I ve already have Windows Vista Ultimate with downgrade rights.

    I want an answer, what will I do with 'illegal' Windows on my Portege because Microsoft says its manufacturer that provides legal downgrade.

    I put t want more Vista I ve tried it on PC and it works perfectly, but on this laptop, it is very slow work of BONE

    Hello

    You said that your laptop has been delivered and pre-installed with the Vista operating system.
    In this case, you can only get a Toshiba Recovery Vista disc.
    If you need another OS, you must purchase a full version.

    But I have other important information for you; in you are going to install Windows XP on the R400, then you need to search in internet compatible drivers because it seems that the Win XP drivers have been released for the R400 not at this time.

    Unfortunately, I have no other news for you

  • Portege R400 - does not recognize 3g module?

    Please help: I got my new Toshiba Portege R400 (PPR40E-00T018G3). I knew that some of the R400 is module 3g, but I could not know if my has a or not because there was nothing on the box or it will show or not (except that on the screen Toshiba Edge 3g icon is always with a triangle below? I assumed that it was because he has no SIM card...), but when I was upgrading memory I noticed that under a keyboard (where is a memory slot) is also a SIM card reader, so I assume that my R400 is equipped with 3g module (why they would put SIM card without 3g module reader?).

    I saw no devices in Device Manager in windows, but I thought that when I put the SIM card, it would install itself (I also did not notice a bluetooth until I installed it later!), but when I put the SIM card, nothing happened - indicator 3g is still off, and I have no new devices in Device Manager. Of course, I installed all the software that was on the page of drivers toshiba r400: Wi - Fi broadband Mobile (Novatel), 3 G RF Power Control Utility and MobiLink, but I have not had any indication that the 3g module is, and when I opened Configfree on dial-up/WWAN, he says: not availible. Mobi link says that there is no device. When I press fn + F8, I get only icons bluetooth and wifi, not 3g. OS is Vista Ultimate Edition and Windows 7.

    My questions are:

    1. is it possible that my R400 (PPR40E-00T018G3) doesn't have a 3 g module, although it has SIM card reader?

    2. for users of R400, you had some indications that your 3 g module exists (i.e., devie Manager etc.) before set you up the SIM card? Or he was dead, and when you put the SIM card he moved.

    3. what drivers did you use and how do you control the connection options?

    Need help please with some info, I read all the posts on the forum about R400 and 3g, but found no solutions. I have seen that some users have their 3g modules R400 works, and ask them for help.

    Thanks in advance!

    > 1. Is it possible that my R400 (PPR40E-00T018G3) doesn't have a 3g module, although it has SIM card reader?

    It is correct.
    Some R400 were equipped with module 3G and some don t support such module.
    Your R400 PPR40E-00T018G3 was not equipped with the 3G module and so it may not be recognized.

    See you soon

  • Portege R400 - No 3G module?

    I just bought this beautiful Portege R400.
    After some research on this forum, I managed to insert the phone card - 3g.
    But I am not able to acivate the modem 3g - I don't even find it in the Device Manager

    A few basics:

    Modellname PORTEGE R400
    TEILENUMMER PPR40E-00S01SJN
    BS-Version Microsoft Windows Vista Ultimate 6.0.6000 (German language)
    BIOS Version 1.50 version
    No modem

    Trying to install TOSHIBA 3 G RF POWER CONTROL UTILITY Version 1.0.1.7 organizers can't do anything (does not install anything, probably because the device is not found)

    is anyone able to get some help... Thank you

    Hi dude

    I think that it s not you know that Toshiba delivers clean products with different hardware configurations and specifications.

    Not all Portégé R400 were equipped with the 3G module

    Your PPR40E Portege R400-00S01SJN does not support this module and therefore the TOSHIBA 3 G RF POWER CONTROL UTILITY does not work.

    Welcome them

  • Portege R400-103 - 3 G internal modem does not

    Hello

    I have several problems with my 3g modem. Even if everything looks well installed, the modem does not respond. In addition the hibernation, sleep and shutdown cause in an accident.

    Portege R400-103
    -Windows 7 Professional

    * About sleep/wake extended/dhutting down: *.
    When I disable devices that are bound to the modem 3g, this all works, so my conclusion is that this has something to do with the 3g device.

    On the modem does not: *.
    When I go to the properties of the modem, and I ask for a diagnosis (modem to send information on the State of request) a box arrives with a message that the modem has failed. The modem worked, and frankly I don't know what crazy it has stopped working.

    Maybe you guys need more specific information. Please let me know.

    Any help appreciated.

    Hello

    Just a question at the beginning: is your laptop preinstalled with original OS that you got with your laptop Portege?

  • Portege R400 - Firmware update fails for 3G card

    During the Firmwareupgrade of the G 3 embedded (expedite EU870D) in my protégé R400 card, I have a power fail. The next time you start, I can't countinue with the upgrade. The card no longer works.

    The Modem and the COM Ports, I don't see in Device Manager. Is there a solution for this error? Thanks for the help!

    Pumbkin

    Why do the update of the firmware?
    You should do this only if the Vodafone SIM card does not work properly!

    I found this info that pop ups before performing a firmware update!

    + Atten-tion of the FW update: +.

    + Please do not forget to read carefully before place the FW. +

    + 1. FW update is not necessary when the Vodafone SIM card works fine in the customer environment s. run the FW update only when the Vodafone SIM card is not detected. Please note that the FW is more reversible to the previous state once updated. +

    + 2. This upgrade tool will apply to the following models with built-in 3G module: +.

    + Portege R400 +.
    + Portege R500 +.
    + Tecra M9 +.

    + 3. Please leave 3G communication and close the connection utility before running the FW update. +

    + 4. Close all applications before you run the FW update. Please DO NOT launch any application during the upgrade process. +

    + 5. Please ensure that you use an AC adapter to power the computer during the process of FW update. Power failure during the upgrade process can lead to failures of 3 G modem. +

    + 6. Please DO NOT sleep/standby extended/Shut Down the computer during the process of FW update. This can lead in mode 3G +.

    So please first these points before you is trying to update the firmware!

  • Recommend a DVD - RW for my Portege R400

    Hello

    I am a newbie and unfortunately not hot with computers either. So I hope that you will understand what I am trying to explain my frustration level is at it's highest.

    I have a Portege R400 and then still have been able to find an external DVD - RW writer. I went through two DVD burners, one being a Sony that never seem to go further than to try to install the disk that came with it. The other a HP took 4 hours to install and has not finished yet so I turned off and tried at all times with the same problem each time. The two products were returned to the store which was good, but now I have so many movies on my laptop that I need to burn it to CD to watch and cannot do.

    Whereas now throw the laptop out the window, as here in the Canada in stores can help me! In a store, I ask the salegirls for DVD burners it I looked with love and after 3 minutes to digest what I asked happily answered "we sell only the quarters!" Now what am I supposed to do with this answer?

    Any help is greatly appreciated, and I apologize for not being more savvy with this kind of thing.

    Thanks again.

    Hello

    Can you please tell me what drivers you used?
    You have them connected via the USB port of your laptop Portege?

    I have good experiences with LG drives. Check this oneout.

    Good bye

  • Portege R400 - tcpip.sys bluescreen error

    I have a new portege R400.

    Random and quite often while connected to the internet, my computer hangs on a blue screen that evokes a few problem with tcpip.sys. The unexpected dumps core, which takes all 4 seconds, not a lot of time to note the error: s. There is something like not_les_than_ (not?) less - or equal to.

    I have the latest modem drivers I can say.

    I googled this to death and found many users of vista with the same problem, but no solutions.

    I tried the patch for tcpip.sys but this has no effect.

    Nobody seems to have a solution... can help you?

    PLEEEEASE?

    Thank you
    Rob

    I don't know if this will help but check the update for Windows Vista (KB939786) or Windows6 info. 0-KB939786-v3-x 86.msu.

    Maybe this will help.

  • deskjetf4280 will not be printed. stuck in the curriculum vitae

    DeskJet f4280 projection of ink cartridges empty even if it is new. now stuck in the curriculum vitae. Cancel button does not work. reume flashes, but nothing happens when I hit him. ready to strike!

    Hello

    Uninstall and reinstall your printer using the right drivers and installation on the HP Web site information.

    And there are some troubleshooting steps for her there too.

    Here is the link to HP for your printer: printer all-in-one HP Deskjet F4280

    Or you can also ask at the Forums to Support HP.

    http://h30434.www3.HP.com/PSG/

    @@@@@@@@@@@@@@@@@@@@@@@

    This can also help you:

    "Solve printer problems.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    "Solve printer problems.

    In the upper right corner, select your operating system from the menu drop-down.

    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    See you soon.

  • Portege R400 - how to get the fingerprint device to HDD unlock

    Portege R400 model PPR40E-00901LEN

    I've had this laptop since 2007 new (approximately). I put the BIOS and disk passwords HARD and the biometric to unlock the BIOS, HARD and Vista drive. It worked well until recently. Result of an incident when someone tried to crack into the machine, it unlocks is no longer the HARD drive

    The attacker confessed to the use of BACKSPACE to work around the footprint digital, correctly guessed the password of BIOS and going on to make several attempts to enter the HDD password.

    Now when I try to access the computer by using the fingerprint reader, it unlocks the BIOS ok, so he remembers clearly to me. However, it is not open HARD drive. Apparenlty the fact that 3 + failures to enter the master password disk HARD text forces text of this password and no biometric entry. At least, there seems to be something like that.

    My questions are

    (1) in these circumstances, the BIOS anterio-rite the biometric to forget the HARD drive password?

    (2) or is still piometric my disk HARD but the BIOS password feature is not asking him?

    (3) if 3 or something similar, so this password is always in the biometirc device, how to tell the device to provide this password?

    Please note that I can't in the BIOS right now, because do not unlock the HARD drive prevents the POSITION to perform.

    Of course, I know what I really need to do is type the HARD drive password. Unfortunately in about four years, I forgot it. I hope that I can get into the BIOS if I remove the HARD drive physically, but wonder if there is something else I should do first in order to avoid making things worse.

    Thanks to hope
    River ~ ~

    Post edited by: river14april

    Post edited by: river14april: typos and clarity

    null

    Hello

    All I know is that the fingerprint for Win 7 software is created by UPEK company.
    http://www.UPEK.com/support/customersupport/psql.asp

Maybe you are looking for