Portege R500 and Windows 7 drivers

Similar Questions

• Portege R500 and Novatel Modem 3G on Windows 7

  Hello

  someone have a solution for getting the Modem 3 G build-in novatel works on Windows 7 in a Portege R500?

  I tried to install the driver for Vista 32 bit on my W7-Ultimate32bit. I have tried this driver:

  http://de.computers.Toshiba-Europe.com/innovation/Tracker.jsp?file=http%3A%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2F0%2fwmb-20071115155201.zip

  Installation starts fine, but the installer then a fallback and stops.

  What do I have to wait for a W7 driver?

  Klaus

  > Should I wait for a W7 driver?
  I think so. You can try to use the Vista driver but there is no guarantee for correct material work.
  I think that Win7 drivers will be available soon.

• Portege M700 and Windows 7

  Hi all

  I installed Windows 7 RC on my Portege M700, and everything was fine, except:

  -Intel(r) Management Engine Interface (show on the device as a PCI Simple Communications controller Manager);
  -Novatel Mobilink to the Novatel Wireless Broadband (3G HSDPA) SM-Bus minicards Modem integrated (EU870D) (list on the device as 4 Interfaces of data manager).

  I used the drivers on Windows 7
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1927814& rpn = PPM70U & modelFilter = & SelCategorie = 3 & selFamily = 10 73768662 and all fine wenf.

  I even managed to get the drivers for the Modem from Novatel minimap from a previous version and accepted Device Manager.
  But when I try to install the v2.02.27 from Novatel MobiLink available [here: http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=2 & selFamily = 4 & selSeries = 157 & selProduct = 773 & selShort Mod = 684 & language = 13 & selOS = 26 & selType = all & yearuploa d = & monthupload = & dayupload = & useDate = null & mode = Chinas allMa & search = & action = search & macId = & country = 8 & page = 2 & startPage = 1] he justs roles back the instalation before it's over.

  Do you know if toshiba plans to deliver a version of Mobilink from Novatel compatible with Windows 7?
  And what of the Intel(r) Management Engine Interface? There will also be a compatible version?

  Thanks in advance guys...

  Hello

  > I even managed to get the drivers for the Modem from Novatel minimap from a previous version and accepted Device Manager. But when I try to install the v2.02.27 from Novatel MobiLink available only here it justs roles back the instalation before it's over.

  The point is that you tried to install the driver on Win 7 OS Vista and this could be the problem. Seems the Vista driver is not supported with Win 7.
  Of course, some drivers Vista would go with Win 7 but not all drivers are compatible.

  I think you have to wait until the drivers Win 7 for the 3G module would appear.

• Portege R600 and Windows 7

  I installed Windows 7 (custom installation). Subsequently installed the Toshiba Setup program to load all the programs/drivers concerned. I have a problem with the screen, especially in Word 2003. That she will all suddenly, distort so that the words become faded/pointed/double, so that you can not read the display. A second open the document in Word will not be affected. Re-opening and closing the particular document clears the problem. The document is late and is not damaged.

  Also found that sometimes when start up or wake up from hibernation, the machine hangs and looks like the fan is working overtime.
  Nothing happen so unless I have a power to force down and restart.

  Finally, the wheel on my mouse (latest Windows 7 drivers installed) will not work to resize a screen of Word and will not work in the folders pane in Outlook 2003.

  Any thoughts?

  See you soon

  Strange! I installed Office 2003 on two laptops Toshiba with Win7 and everything is OK.
  Have you noticed some other display under your Portege R600 Win7 problems, for example in Internet Explorer or other applications running?

• Portege R500 and SSD update

  I have a Portege R500-S5006V with a 64 GB SSD installed.
  Currently I have space issues, but always so happy with this nice computer I don't want to replace it.

  Is it possible to upgrade to an SSD more? What kind of readers are compatible?
  I need to send to Toshiba, or a regular computer repair shop can do this for me?

  I think that the SSD in this machine is not a standard 2.5 "SATA or IDE Drive, it is 1.8" and has a ZIF connector and runs as an IDE device.

  Do a google search for "IDE ZIF SSD" and you will find a few commands which can be compatible. In theory, they should work in the R500, but I'm not 100% sure.

  An FSL can install for you for a fee.

• Portege R500 and Toshiba optical Tilt-Wheel Mouse

  Hello

  I have a problem with my Portege R500 combined with my Toshiba optical Tilt-Wheel Mouse. I use Win XP Pro SP2.

  When using the laptop will cut the mouse. If I plug the mouse into a different USB port, I can use the mouse for a while, but it does not stop.

  Then the same problem, but a reconnection to another work of doesn´t of USB port.
  I use the original Microsoft win xp driver.

  Hoody Bye

  Have you received the special XP driver with this mouse?
  If Yes, then install it.

  But to my knowledge it s common USB mouse that needs to use a plug n play

  Then maybe you should check the USB settings.

  Go to Device Manager and open the USB bus controller tree
  Here, you must mark the unique USB root hubs and select Properties.

  In the Management tab to disable the function allow the computer to turn off this device

  In addition I recommend upgrading the XP to the last State. I want to say that all fixes and patches must be installed!

  Good luck

• Portege R500 and Wireless connectivity N

  I just bought a new Portege R500 with wireless capabilities N, through the pre-installed Intel 4965agn wireless adapter.

  The problem is that it does not connect to the router Dlink 2740 b mode only wirelessN. The only way I can connect it is in when the router is in the mode of GBS and it connects to 54 members.
  No idea why the N Wireless does not work?

  Arnaldo

  Perhaps that the wifi router doesn't support the standard 802.11 N wirelesses

  I think you should check your router WLan properties.

• TWAIN webcam and Windows 7 drivers

  I searched the Internet high and low trying to get an answer as to if the LifeCams have a TWAIN for Windows 7 driver.  As stated by several people on the net, many applications still require a TWAIN driver for webcams to work in their requests, even if Windows 7 is not required.  My service COMPUTER applications recommended HD-6000, HD-3000 or VX-2000 and their TWAIN drivers, but I cannot confirm that they have TWAIN drivers.

  Isn't it or not?  I'm tired or research and appeal.  Laughing out loud

  If Microsoft have TWAIN drivers available, they will be residing on the site of Microsoft hardware downloads...

  http://www.Microsoft.com/hardware/en-us

• R61i and Windows 7 drivers

  Where can I find drivers for Windows 7, 64-bit and 32-bit Version? I am considering transferring my OS to Windows 7 in the near future. My model is Thinkpad R61i 7650-A9G.

  Thank you

  R.

  There is Lenovo Windows 7 Beta drivers available here. Some released Windows 7 drivers have already appeared on the normal support pages, including the R61i. Lenovo said that drivers released will be available 'the or around October 22', windows 7 release date of general.

• Satellite Pro L10 and Windows 7 drivers

  Hi guys,.

  I'm looking for a set of drivers for the laptop model above. I recently installed Win7, but I have no drivers for the machine at all.
  XP drivers do not work.
  If someone managed to install the drivers for this machine? I'm mainly interested in getting my wireless card working.

  I look forward to your responses.

  Thanks in advance for your responces
  Panos

  Satellite Pro L10 is old enough for laptop and I do not think that you will find all the Win7 drivers.
  According to the Toshiba - http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm - your laptop isn't supported Win7 and find the drivers won't be so easy.

• Portege M750 PPM75E Windows 8 drivers - SOLUTION

  Hello

  I just wanted to leave a message with the solutions that I found for different applications for Portege M750.
  These are the applications that I use the most,
  so if you need other drivers and applications just leave a reply and I'll try to find it.

  _Got work: _
  Pilot Bluetooth and 3G and GPS ([Toshiba Europe | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU])
  Keys, except the button Assist de Toshiba and presentation.
  Both opens it: [buttons | https://skydrive.live.com/?cid=0b5d644d977b4b3a&id=B5D644D977B4B3A%212226&sf f = 1].

  What I find more useful then the old functions.
  Installed value-added package, I think that from here: [go to the download section: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=M750-S7213&rpn=PPM75U&category=&selCategory=2756709&moi d = 2266999 & os = & ct = SB & selFamily = 1073768662]. The website of europe has failed.

  Utility of fingerprinting.
  Control Panel-> user accounts and the safety of the family-> user accounts and you have an option in the left side of the window for fingerprints. Install the drivers and programs, works like a charm. Or search on google for TrueSuite

  For the ctrl + al + arrow down to reverse the screen, I used iRotate (google it).

  Still no solution for the protection of HARD drive utility, again.

  Many drivers Win7 would work with system Win 8.
  But there are still some drivers and utilities which are not entirely compatible.
  I have a tip for you:
  As far I know the HDD protection as utility isn't a model of related software.
  You can try to install Win 8 HDD utility out to protect Z930 protection

  It would be really interesting to know if it works.

• Various installation with the Portege R100 and Windows XP issues

  Hello

  I recently bought a used Portege R100. It came without OS and I wanted to install XP SP2.

  I know that restorations only work with PCMCIA readers adapted, but the HARD drive is formatted, so there is no recovery possible I guess.
  Here are my problems:
  -with my very old Freecom PCMCIA CD player the Windows installation CD is recognized, and it starts to load the XP drivers until he wants to start copying files installiation--> then I get the blue screen of Windows with the error 00 x 7 (virus or driver)
  -the same thing happens with my former W2k Pro installation disc.
  -With the even more ancient W98SE, strange things are happening too: installation seems to work fine, but when it comes to start with W98SE, for the first time, the system hangs up with pixelgarbage.
  -Make the 6 Bootdisks with makeboot doesn't work anymore.
  -J' also tried MS-DOS! And guess what! It worked! Loading the Freecom drivers and copy of Windows I386 folder on my hard drive with the volkov Commander (something similar to NortonCommander) worked too! So I got hav files on my drive but after running Windows NT in the i386 folder, the system hangs after some time, when it starts to copy the files to a temporary folder.

  So I tried almost everything I know. at this moment I am download knoppix to try it.

  I ran Memtest86 and 9 Diskmanager to test the RAM and HARD drive, finished two withut errors, so the priority of main parts in the installation process seems to work. Maybe it's that my IDE controller is broken?
  I have no idea, WHY does he not move windows!

  Help is hot!

  Thank you

  Christian
  Does

  It should work out that way, run you own your HD first in Fat32format - file-system, otherwise it won't work!
  Don't forget to use "smartdrive' in your BACK-commissioning, otherwise it will take a lot of time, even the 'freeze' is possible.

  See also: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232

• No sound on Portege R500 using Windows 7 RTM

  Hi all

  I have the problem of sound with Windows 7 RTM. No sound playback, the microphone works very well and the control panel > hardware and sound > Realtek HD Audio Manager detects whenever a microphone or headset is (UN) plugged.

  Any driver I install and no matter as the playback source (sound system, Media Player, Winamp and others), there is no playback of the sound on the speakers or the headphones. The last I installed Realtek R2.31 is.

  I start to wonder if what happens to be fixed, after all, Windows 7 is to go gold and there is no solution for this problem.

  Hello Paulo

  If you see this section of Win7 you will find a lot of comments but a general message is: Win7 is not published official and drivers Toshiba doesn't offer WIN7 at the moment. When the Win7's official published Toshiba will start Win7 support, and I hope that your Portege will also build.

  This means that Toshiba will offer drivers Win7 on Toshiba download page. These drivers will be tested and it should work properly. Now on US Toshiba support page you can download some drivers Win7 BETA (untested). If you want to check under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp

• Printer HP PSC 1315 and Windows 7 drivers

  Hi guys!

  I can't find Windows 7 64-bit or 32-bit (I use Windows 7 64-bit) drivers for HP PSC 1315 on this page and if I installed the driver more former example Vista 32 or 64 bit installation wizzard could not allowed me I don't know what I can do with that. I need to use this print device. I know that this printer is very old, but I don't have any plan to buy a new one. Now if you'll excuse me I have not good English language skills.

  Message edited by coper471 on 08/19/2009 23:50
  Message edited by coper471 on 08/19/2009 23:51

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• Portege 7220 and windows 98. Black screen installation

  Hello

  I am facing this problem when I try to install win98 on the machine above Portege 7220 (/ PIII650/64/12/13 t/M), following on its docking station...

  I boot from a floppy disk and cd rom (e:\) access in order to run the installer of windows 98SE. Once I typed e:\setup.exe I get a black screen and the computer crashes. However I can install windows NT or 2000 on this machine, and also the windows 98SE cd works ok on other computers, i.e. no black screen!

  No idea what is the problem?

  Thanks in advance,
  Bar

  Hi Bar

  Please do not be angry on me, but I have to ask you something. Did you use Win98SE full version or simply update CD for Win98?

  It may be that your CD is scratched! Then please try another new CD or another OS as W2k!