Portege R500 - anyone using the DVI Port Replicator II on WIndows 7 Beta?

Hello
I'm using the beta version of WIndows 7 on my R500 and runnig it's just well except the DVI Port (on the Port Replicator II Slim).
I have installed this software Fingreprint, battery bluetooth (which are recommended as a solution by the Action Center) and the 'TOSHIBA value added together"which adds the management software of power supply, control over the 2 hardware buttons and gives the FN menu to the screen to control the functions FN1-9.
I think I can say it's definatively a driver problem, because if I start the R500, the windows loading screen appears on my screen, but when he switches to the desktop, the external screen turns off and the desktop on the screen of the laptop. Also, no chance to activate via FN + F5.
I tried with the driver Windows 7 buildin, the latest driver from intel (15.8.3) and the vista driver provided by toshiba (7.14.10.1244), but none of them work: (unlucky
BTW: the vga output works, but only UNdocked :(
Does anyone have a solution or a tip what to do or try?

Hello!

First of all, I have to say that Windows 7 Beta is as its name the indicates that a beta so there might be some problems and it s not sure that everything works fine with Windows 7 Beta.

Your problem: you see the second monitor in the display settings? There you can active it and mark the option extend my Windows desktop on this monitor.

Lastly but not the least you should do an update of the BIOS if you have n t the latest version.

Good bye

Tags: Toshiba

Similar Questions

  • Can Portege R500 - I use the Fn + F5 on the keyboard?

    On the laptop keyboard, you can use Fn + F5 to switch the video output to the screen of the laptop to one to connect to the outside.
    Is there a button that you can use with a USB keyboard connected to the laptop which would have the same effect as Fn + F5?

    We have a problem with one of our Portege R500.
    When the laptop is docked in the port replicator, we have a desktop extended on two screens - a 22 "on DVI and a 17" on VGA screen.
    When the user takes the laptop away and uses that off the port replicator, the display returns to the screen on the screen of the laptop so this means what they re - anchor their laptop in the port replicator, they have no display on a screen.

    The work around is to open the laptop, press Fn + F5, close the laptop, connect and set the view registered software intel.

    Any help would be appreciated.

    Thank you
    Steven

    Hello

    Message describe you exactly how the switch of the display function.
    Everything is OK.

    If you ask for FN + F5 function on the external keyboard so I must say that, as much as I know this FN feature is not available if the external keyboard does not support the FN keys.

    But you can also view the Mobile Extension of Toshiba (if you are using Win XP).
    In Mobile Extension-> display tab service change, you can activate the display changes service and could check how the display changes after the connection and disconnection of the R500.

  • Use of DVI port on Port Replicator II with Tecra S11 - 11G

    Hello together,

    I use a Toshiba Tecra S11 - 11G with port replicator.
    I use an external monitor L1950, it is connectetd with VGA cable.

    Now, I want to use the DVI Port of port replicator, but the monitor did not detect the signal.
    Is it possible to use the DVI connection?

    Kind regards

    Michael

    Hello

    Your Tecra A11 does not support DVI port
    The Replicator replicates the ports available for laptop. But if the mobile phone does not support a certain port, then the port replicator is not able to reproduce such interface so I guess that's the reason why DVI ports could not be detected using port replicator.

    PS: did you install the driver provided with USB 2.0 Port Replicator II package

  • Portege R500 - remove 'Eject the PC' from the menu pinned using pyrite station

    We run for Toshiba Portege R500 laptop in Windows XP Professional SP2 environment.
    Toshiba tools are installed to allow UN/hot docking on laptops.
    Portege R500 laptop computers come with the Slim Port Replicator docking station.

    During the docking of the laptop, 2 "pinned" items appear in the start menu called 'Eject the PC' and ' Eject PC and sleep. "
    We found that because of our custom build and Toshiba tools, there are a few conflicts.
    Most of these conflicts have been resolved, except for one that was recently found.

    When a user selects the option "Eject PC", it works as expected, however when the user plug their docking station back in, the port replicator is inactive (in other words, all the functions of the mouse, keyboard, cable LAN, etc. which are connected to the Port Replicator become unusable).
    To remedy the situation, a restart of the computer is required to do and everything works then according to normal again.

    To avoid users to do this, is there a way to remove the icons "Eject PC" & "Eject PC and Sleep" be pinned?
    Of course the added items can be deleted under the user's profile, but when the laptop is returned, these added items return.

    I tried to add a few registry keys to see if NoEject can be set to prevent this.

    Hello

    > To avoid users to do this, is there a way to remove the icons "Eject PC" & "Eject PC and Sleep" be pinned?
    It is not known to me
    I think that everything can be changed by using the right registry and value, but I have never tried this.

    But my knowledge of the Toshiba * Mobile Extension * tool controls this function.
    On the page of Toshiba Europe, you might find a more recent version: 3.87.00

    I think you should update this tool.

  • Portege 3480CT - DVD player in those Port Replicator errors

    I have a Toshiba Portege 3480CT with an external media Port Replicator.
    The MPR has a DVD player, but I can't get the laptop to recognize DVD.
    He can see and read CDs, but I get the following error when I try to watch a DVD.
    "ASPI for Windows is not available...
    Only 32 bits supported CD rom drive... »
    The MPR recognizes that the drive is there.
    Laptop is running Windows XP SP2
    Have the BIOS update update and installed all the drivers Toshiba known.
    Can anyone help? Thank you.

    Hello

    In my opinion you need driver ASPI Google everywhere. Maybe you will find the solution for your problem. You can start with this one http://www.ncf.carleton.ca/~aa571/aspi.htm

  • Tecra A9 does support DVI-port replicator Express

    Hello

    does the Tecra A9 (PTS52E-01T02NGR) support the DVI-port of the express duplicator?

    The manual (for Tecra A9, Tecra S5, Satellite Pro S200) says this, but the screen is black, if I connect the monitor via DVI port. It works using VGA, but poor quality (interference).

    My colleagues all have the same problem. We use different samsung TFT; the operating system is Win XP Pro.
    The manual also says "..." Maybe some DVI monitors can be used... "but before testing the other monitors, it would be interesting if there is no DVI at all...

    Thanks for your help!
    Daniel

    Depends on used Tecra A9, if you can get a picture on the DVI port on the Express Port Replicator (PA3508E-1PRP) or not.
    The DVI port on the Port Replicator Port Express is * supported only on computers with graphics card ATI or nVidia *.

    If you have a DVI INTEL graphics card port on the on the Port Replicator Port Express is * DO NOT supported *.

    Best regards

  • Tecra M9 longer works with the Advanced Port Replicator III

    Hello

    I have the Advanced Port Replicator III Plus (PA3474E-1PRP), and it works very well with my M5 (M3 and M200). For example I connect my laptop through it to my monitor/mouse/keyboard/external DVD/hard drives, sound, webcam etc...

    Now, I'm to assess what should I buy as my next laptop and the M9 (PTM91E-03000MEN) seems good.

    Question: * the M9 will work with my plu III advanced port replicator? *

    Otherwise, * y at - it another docking station option that will allow me to connect a M5 and an M9 * please? (of course not at the same time).

    If there is no solution that allows a single docking station for the M5 and M9, then I might as well choose a laptop from another supplier... Main reason to stick to Toshiba all these years is the docking station compatibility that I move older models to the newest...

    All thoughts welcome...

    See you soon
    Daniel
    --

    Tecra M9 and Tecra M5 do not have the same docking connector.
    This means Tecra M5 is the APR III +, Tecra M9 has Express Port Replicator.
    You need the correct docker for each system.

    May it is a solution to be able to use the Toshiba Dynadock. It's USB based:
    http://www.dynadock.com

  • How do I receive audio via the DVI port?

    Hello.

    I have a HP Pavilion p6-2378, that I use as a PC Home Theather. The motherboard on this model lacks an HDMI port, which is how the rest of my system connects. I use a HDMI-DVI adapter and video works perfectly, but there is no audio data. Several people told me that the sound signal can transmit through the DVI port. Y at - it a setting or a software that I have to make it work?

    Thank you.

    Hello

    This article could make interesting reading.

    As suggested above by Paul, use a discrete videocard with HDMI.

  • Use the ethernet port to connect a pc

    Hello

    I intend to use my raspberry pi to do some projects, but is not close to the router (needs thought Ethernet connection - and before anyone asks I'm not able to use a wifi dongle to connect because of the requirements of the project size wise), but near my officejet 6700, can I use the Ethernet port on the printer to connect my raspberry pi to the network from that the printer is connected. I have to play with settings?

    Can anyone help

    Thanks in advance

    Martin

    No you can not use the Ethernet port on the printer.  It is only to connect the printer to a wired network.

  • Using the Serial Port on the HP 50 g graphic calculator

    Hello world

    I have another question. I want to use the Serial Port on the HP 50 g to connect with another device. The device is called the MFJ-1214PC. What it does is to accept the text and commands through a 9-pin serial Port and converts the text in a Code Morse/RTTY sound audible. It also decodes Audible the Morse Code and RTTY radio signals and displays them as text on your computer. The program that controls the MFJ-1214PC was originally written for an IBM PC for the MS-DOS operating system. The HP 50 g graphic calculator meets the system requirements for the simplest version of the program. I was wondering if there is an MS-DOS emulator written for the HP 50 g, which would allow the HP 50 g to become the computer in this case, or if the program could be rewritten and brought to the HP 50 g. If it could be rewritten, programming language what do you think would be better suited to this type of application (if it is even possible?) or UserRPL, SystemRPL or Assembly. Don't forget that I'm a complete newbie with the HP50g and have never programmed with it yet. I'll include the manual of the MFJ-1214 PC as an attachment so that you won't have to look for him. Thank you in advance for your help!

    ~ Zekelegge ~.

    I understand (from my brief overview) out of the box-MFJ-1214PC, this offer box decoder output series computer.  The computer (50g in your case) will have the software to read message series and then convert that to an output for display.

    BartDb gave you the right answer.

    A serial cable with the correct speed level and reversing lever to manage as well as the 50G has a RS-232 signal to the outside world is the ideal solution.

    However, make sure that the output of the decoder box series package can be understood by the 50 g. aud, bits, etc.   (you have the set-top box manual, so you'll have to look that up)

    the streamsmart is not an aggregator of serial port.

    in other words, these connectors DIN of Qty 4 on the front do not accept series rs-232 input and send then to 50 G.

    I'm not an expert, streamsmart more info on these boxes is rare to find.  The probes are even more rare.

    However, I know that the 4 connectors are for the analog-to-digital conversion in the probes.  The streamsmart works as a "data logger" in which he sees the input probe, the A/D converted, then sends it to the 50G (or a computer via the USB port).

    In addition to the solution of Bart, there was another named Tiwag forum poster who created a serial cable and displayed a schematic representation of the cable.  This information can be found here:

    https://groups.Google.com/Forum/?fromgroups#! searchIn/comp.sys.HP48/serial$20port/comp.sys.HP48/ltcane1jSOw/uHyw2Ti03kgJ

    to see an example of programming to use the serial port of 50G, you can reference the following hpcalc GPS data collection program.

    http://www.HPCalc.org/details.php?id=7105

    It is written in userrpl so can be crossed with the reference of users advanced for the translation of the syntax.

    It seems that the main routine of concern for the comm to the gps is in the file "GPS >.

  • Dynadock U3.0 - cannot use the Ethernet port after update 8.1 Win

    Hello world

    I use a u3.0 dock Dynadock with my Vaio PCS 13.
    I'm not able to use the Ethernet port on the Dynadock since I updated my Windows 8.1 device update 1.
    Before that everything worked well.

    I'm not able to re-install the drivers correctly (tried 7.6m0, 7.5m2). While the game driver tries to start, I get an error message, Setup is not able to put a bunch of registry (SYSTEM\CurrentControlSet\Services\DisplayLinkGA\D evice1) keys (up to 0). (Image 1)

    If I ignore these messages and do not install the driver, the Ethernet port will not installed in Device Manager. (Image 2)

    If I try to install the driver manually (DisplayLink network adapter NCM), I'll get an error message that a driver has been found but that access has been denied. (Image 3)
    I started the safe mode and could install the driver. But if I reboot in normal mode, the machine could not be started.

    I also tried to disable UAC and I am logged on as administrator 'real '.

    Please find the attached messaged (in German) error:

    [picture 1]: http://picload.org/image/lcalwop/toshiba.png
    [Picture 2]: http://picload.org/image/lcalwoc/toshiba2.png
    [Picture 3]: http://picload.org/image/lcalwlg/toshiba3.png

    BTW: If I unzip the Installer (7.6m0) and install * inf for the good Fri & dev (4503) it still does not work...

    I put t know what to do anymore...

    Hello

    After upgrade to 8.1 Windows, you should also update the software/driver Display Link
    This is very important!

    The latest version of the driver can be downloaded here:
    http://www.DisplayLink.com/support/downloads.php

    Note: the old version must be removed!

  • Satellite A100-192: is it possible to add the DVI port

    Hello

    is it possible to add the dvi port to this laptop?
    ati mobility radeon x 1600 graphics card is the chipset
    supports the dvi and analog component output

    is it possible to add the dvi port
    or component signal output on the d - sub port?

    TIA

    Hello

    There is unfortunately no way to add a DVI port to this machine. The problem is there is no adapter for D - sub to dvi and you can't go to the motherboard of your machine with a DVI connector.

    Boyfriend sorry but it is a fact...

    Welcome them

  • Satellite A300 - using the HDMI port as an input

    Hello

    Currently user of a Satellite A300-1OT, I would like to know if there is a way to use the HDMI port as a port of entry, in order to connect my blue-ray on my computer drive

    THX
    Ludo

    Hello

    The HDMI port is a video output port!
    It sends video and audio signals and doesn't receive signals

    Simply said; No, that's not possible

    Good bye

  • I can get the data of a hygrometer using the RS232 port with the following T75.2F:H17.0% using a RS232 data logger format. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

    I can collect data from a hygrometer in a text file using the RS232 port with the following T75.2F:H17.0% format, these data are collected using a data logger software. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

    The setting below causes the error. Change for the second selection, output values of all channels.

  • HP Deskjet 1010: Wireless printing through a TG1672G of ARRIS, use the USB port on the modem?

    It is possibel to print wireless with a TG1672G of ARRIS, use the USB port on the modem?

    Hello

    There is no print server function so you can not:

    http://gditechnology.com/manuals/Arris_TG1672G_Data_Sheet.PDF

    Kind regards.

Maybe you are looking for