Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI
I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
I connected the monitor to the DVI port on the port replicator and got it to work OK.
Press fn + F5 would switch between the computer screen and the external monitor.
Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.
If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.
The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.
I spent an hour on the phone to support Friday, and he made me nowhere.
They finished by saying that he should never have worked! So what is the DVI port because then?
Any ideas?
David
Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
If it works, then connect with port replicator, and then try again.
It's probably best if you reinstall display drivers. Maybe there are new too on the download page.
Tags: Toshiba
Similar Questions
-
Portege M200: Rotation utility does not work with the new driver
Hello
I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.
When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.
Anyone any ideas?
Hello
You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site
-
For Portege 3490 AC adapter does not work with the Satellite A100-159
I have a supply of 15V 120W car (or plane Kensington). It works very well with a Portege 3490CT. It doesn't do a thing with my Satellite A100-159 new. The power supply provides also 15 V 6 a. Can someone tell me why the Kensington work?
Or does anyone have a diagram to a power supply adapted myself, preference of 11, 5-14, 12(4) and 24 VDC (23-28: 8)?
Thanks in advance!
Hello
I can give t you an answer why it does not work but usually you need to use the adapter for vehicle recommended by Toshiba. Incorrect adapter may damage the laptop!
I think that the card for Portege 3490 adapter is not compatible with Satellite A100That the two car/truck/Air 120W laptop charger must be compatible:
PX1237E-1NPO
PX1235E-1NPO -
External monitor does not work with Tecra M Series
Hello
I'm trying to connect to an external monitor, however it is not working properly. The monitor works fine with another laptop so I know that the monitor is ok.
When I first start the lptop I get the screen then I XP Flash on the external monitor perfectly clearly, however when it will boot Windows XP the external monitor goes haywire.
Advice/suggestions would be appreciated.
Either way, I just updgraded all display drivers and BIOS but with no solution to the problem.
Thank you very much in advance for all help/tips.
King Tony
Hi mate,
my suggestion is to reduce the resolution for the external montor. Maybe you have the problem that the resolution and frequency h/v is not defined as it should be.
When starting your laptop, then let the disconnected monitor. When the machine is running, then connect the monitor to the machine (it s OK, it s not dangerous or something) and then go into the control panel for the graphics card. There you can set the options for internal and external monitor.
Set the minimum resolution for the outside and try to activate him. It should work normally...
Please tell me, what kind of machine do you have? You need to give more information, so maybe other people with the same machine can help you.
Welcome them
-
Foxit Reader does not work with the help of laptop HP and support Guides, suggestions?
New HP Pavilion with Windows 7 x 64 I downloaded Foxit Reader and installed and then uninstalled Adobe Reader to save space. Then, although it will open my PDF in 'My Documents', it will not open the Guides or learning PDF in HP help and Support files. Is there someone with more experience to use Foxit Reader that may suggest a work around? If I reinstall Adobe PDF then everything works again.
John -
Portege M200 - pen does not work with the screen
So I bought a pen for M200 and reinstalled the operating system.
Now I M200 with Windows XP Tablet PC edition, a utility Screen Rotation and usefulness of the stylus button. Now Pen buttons work fine with my new pen, but the screen itself does not work. I mean, the stylus does not work with the screen.I have a mouse, and another menu pointing devices in Device Manager and it includes the following submenus:
HID compatible mouse (I use the random DELL mouse)
Mouse PS/2 Cimpatible (?)
--------I think there must be something else...
Please tell me, forum, what drivers should I download to get the pen to work?Stand by. Are you using the original image of recovery Toshiba (operating system) or you have installed your version?
-
SQLite Manager does not work with the v11. Until that make it easier to return to older versions or newer versions stop, breaking most of the modules I use FirefoxHow to come back at 10 Firefox?
Update Firefox 23.0 which published yesterday afternoon.
-
my photo does not work with the screen saver
Photos has never worked on Apple TV 4 until today with the 032116 update, but my pictures does not work with the screen saver.
I dare you to try to tell me how to make it work. Please have a solution, someone.
Given that Apple isn't really care or help on these forums, it would be great if someone mentioned the steps.
Thank you
Can you elaborate on the question?
These are user forums and this is why you will not see the participation of Apple here
-
HP laserjet p1102w: wireless printer does not work with the new wireless network
My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you
Hi Shlomi,
Thanks a lot for the info. I'll give it a try today... -
I updated my Apple ID, but only old man always appears when I try to update my password does not work with the old id. Can anyone help?
You can try to log in to your old account and then sign in with the ID again. Your applications will be always related to the original account - you must use the old account to update.
-
IR remote control does not work with the new imac
IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"
Correct, because Apple no longer includes the IR sensor in newer models
-
EliteBook 1020: External keyboard does not work in the form of Bitlocker
We had a few HP 1020 and 1040: models recently, and all have the same question. When the laptop is connected, the external keyboard does not work in the form of Bitlocker. It works in the BIOS and in Windows itself, but not in Bitlocker. This means that we must open the laptop screen to enter the Bitlocker pin, then let it open and GPO that dictates the computer into hibernation when the lid is closed. We have twisted the GPO, but in vain. Anyone else seen elsewhere or a solution?
If the bios is up to date, I would look at the BIOS settings. I think that Fast Boot is enabled in your case, this may cause usb devices not to see in the stadium that BitLocker requires
-
128 - GB MicroSD card does not work with the new Clip +.
My old Clip + (black, 8 GB) was getting very long in the tooth, so I ordered a replacement off Amazon. As far as I know, it is identical to the old, but a very unpleasant difference is presented - it does not work with the MicroSD card which has been a huge part of why I got a Sansa at all. He acknowledges, but after a media updated I'm lucky if more than one album appears. And that's what's so crazy! You just blow through the update in a few seconds, and when I navigate on the map, there is nothing or a handful of albums random, orphaned. That's happened? I updated the new Clip + for the current firmware (as I had done with previous); I made sure to reproduce all the parameters that I would be put in place before--I can't imagine what could be the cause!
Treats quick closing:
The card is formatted in FAT32 with the same sector size in storage aboard the player (32 768 bytes).
A 64 GB card format works even without any problem.
I tried to update the media in MTP and MSC mode; the problem is the same in both.
There is ample space for MTABLE. SYS - I have not yet loaded all the music on the Clip + itself.
Rockbox plays the card without problem, but the sound quality is horrible (at least on this player; I'm sure that other versions sound best), and its interface is a headache. No thanks.
HM. Looks like to run CHKDSK /F on the map the problem resolved!
-
Sansa Fuze does not work with the Xbox 360?
I know that the console is capable of playing a MP3 player through it, I could do my job as Creative Zen. I don't understan why it does not work with the "rocket", the interface looks more simple on the surface of things. And I'm sure it doesn't because I don't have a HARD drive for my Xbox, it was working fine before.
The reson I am, I wanted to know because I wanted to know the other ways of playing my rocket while listening. the kool on my expirimentation thing is I found that the Xbox will charge my rocket when it is off and I can listen at the same time. I also found that my Playstaion 2 will work also in this copacity all-in-on.
Basically the Auto setting works well with the XBox. Select settings > USBMode > MTP or MSC.
With PSG, you can even play content protected by DRM rockets (IE Rhapsody) on Xbox.
-
I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
I have an acerDiagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: invalid license
Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - XY9X3 - JDXYP-6CJ97
The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
Windows product ID: 89583-OEM-7332157-00211
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6002.2.00010300.2.0.003
ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Premium
Architecture: 0 x 00000009
Build lab: 6002.vistasp2_gdr.110617 - 0336
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{F20B4B72-1308-45BE-8F90-95E91A3F0AAF} 1.9.0027.0 6.0.6002.2.00010300.2.0.003 x 64 *-*-*-*-6CJ97 89583-OEM-7332157-00211 2 S-1-5-21-923204104-223683984-168055983 Acer Extensa 5630 Phoenix Technologies LTD. V1.30 20090319000000.000000 + 00070333507018400FA 0409 0409 US Mountain Standard Time(GMT-07:00) 0 3 ACRSYS ACRPRDCT 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6002.18005
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
Installation ID: 004511331255365043724851364501374781338933223323713385
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: 6CJ97
License status: Notification
Notification reason: 0xC004F063.Windows Activation Technologies-->
N/A--> HWID data
Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ isActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP INTEL CRESTLNE
HPET INTEL CRESTLNE
START PTLTD $SBFTBL$
MCFG INTEL CRESTLNE
SLIC ACRSYS ACRPRDCT
ASF! OEMID OEMTBL
SSDT BrtRef DD01BRT
SSDT BrtRef DD01BRTAh! -in this case, it is not necessary.
I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033
Open the Windows Update - click the link view updates installed on the left of the page
in the list, find the WAT update KB971033, and then uninstall it.
Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033
redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?
Maybe you are looking for
-
MY older iPad has changed color in the negative as opposed to a positive image. I could change this in black and white. How do I change back to color if settings > general > accessibility > invert colors does not solve the problem?
-
HP pro 3125 supports the 600 Watt power supply
HP Pro 3125 can supports the power of 600 watts? Can HP pro 3125 PCIe supports ddr5 graphics cards?
-
Need your opinion on Satellite L300D-11V
In contemplating this laptop priced at 349 to curries. Main use is word processing, music. I player videos download. eBay and general navigation. Chose this one because of the availability and its construction in webcam and microphone. New to all thi
-
Vice versa functional quick launch buttons?
The functional quick launch keys work vice versa. For example: if I need to refresh the page (f5) I have to hold fn and then only, press f5. But if I need to turn off the sound, I simply press f11 (without the fn). is it ok? Can I reverse this some h
-
HPG6: password administration
After three attempts to error message. 51180828,Thanks againa szigatti