Portege R500: How could I access "Toshiba Power Saver" as a user restricted

Similar Questions

• How can I install Toshiba Power Saver on my newly installed Vista?

  So I have a PC laptop Toshiba A100 and I just upgraded the operating system factory (XP), Windows Vista default. Anyone know if it is possible to adjust the brightness of the screen in Vista without Toshiba Power Saver? Or y at - there a way to download Power Saver from Toshiba for Vista? Thanks for any help!

  Hello

  In Vista, there is no Toshiba Power Saver as under WXP and now many parameters have been taken on Vista power settings. With other words Toshiba Power Saver is not like in the version of Windows XP Home edition. The Toshiba Power Saver is now part of the package of added value.

  When this package is installed you can set the screen brightness as before using FN + F6, F7 key combination.

• Satellite M60: How to uninstall Toshiba Power Saver

  Anyone know how to uninstall the Toshiba Power Saver driver manually (so that should not be able to perform a clean installation of Windows)? There is no automated uninstall for the GST driver (should not be confused with the Toshiba Power Saver that can be uninstalled without problem).
  Note: the recovery CD is not an option here, because the pilot of the GST is included.

  I want to do this to check if this is the thing that messes the keyboard or not (see posts on M60 keyboard problem). I just wanted to check on a new Sat P100 which has a similar keyboard, but guess what... the GST is not enclosed with it.

  You guessed it, the keyboard problem has not resolved the Toshiba service representative.

  Hi Sammo

  Unfortunately I have no solution, how to remove the GST driver but it will be interesting to know how it works after installing the full version of Microsoft WXP. If you do a few tests please let us know.

• Toshiba power saver disappeared completely

  Hello

  My "Toshiba power saver" disappeared - there is still an icon in the 'systensteuerung' but when I try to open it nothing happens. But still when I go to open the windows of Windows XP "energy management" tells me to use the "Toshiba power saver.
  This appeared after I used the "steganos security suite" to clean my system. First I did not notice the change because only a few icons in the taskbar where gone. The program must have deleted something. Does anyone know how to restore the "Toshiba power saver?
  I hope that there is another way to reinstall the "Toshiba power saver" instead of reinstalling the entire system...

  .. masse be nice if someone could help me.

  Ciao, Christoph

  Hi Christoph,

  You don't say what model of laptop you have, but you should be abl; e to load the Toshiba Power utility tools and Utilities CD that came with your laptop.

  If you do not have this CD, then you should be able to download the utility from the download section of the Web from Toshiba site specific to your model of laptop.

  HTH

• Re: Toshiba Power Saver and administrative rights

  I have set up another user with administrative rights but cannot access toshiba power saver to change settings.
  I have to open a session as long as the original user to change anything either.

  Help

  Hello

  As far as I know the admin can only change the settings to save energy and can assign and configure power profiles.
  The user then, else can not change. It is not possible

  Greetings

• Portege R500: Impossible to install XP in Toshiba Power saver

  Hello

  I have a protégé R500 PPR50E which had Vista on it, but now has XP on it.

  I installed all drivers etc for the laptop and everything works fine except that I can't get the toshiba power manager to install.
  Whenever it installs programs it shows as 0.00 mb and installation when you click to open the control panel in the Add box, or move the section it says "a fatal error has occurred. This program will be terminated - code 0 x 0 - and then if I try to uninstall it to try a reinstall it says: "1628 - could not complete the installation.

  Any ideas anyone?
  I downloaded the correct driver of course - I tried a redownload and it made no difference.

  Also - I may pluching at straws but in the Bios before I made the construction - I turn the controller as opposed to ACHI ACHI compability mode - don't know if it could have an impact on it? -If I turn that on XP blue screens because I never installed the driver in the windows install (f6 prompt)

  Hello

  I believe that you are unable to install the Toshiba power saver.

  We should focus on this error message:
  * 1628 - cannot complete installation *.

  Usually, this message may appear when installing any software that uses the InstallShield Setup program. According to InstallShield, this is a general error message indicating that the application has not been installed successfully.

  Solution check this:
  http://knowledge.Macrovision.com/selfservice/viewContent.do?externalId=Q108464&sliceId=1

  Best regards

• Portege S100: How to restore the system TOSHIBA Power Saver setting

  When I had to test my battery and created a new setting of power on my laptop, I accidentally deleted the default schema TOSHIBA Power Saver of my those listed on my utility on Control Panel Power Options.

  I tried to restore the Toshiba utility, by recreating a power scheme called "TOSHIBA Power Saver" - but Power Options says that there is already a framework plan of the same name.

  When I start the laptop, I get an error message saying that the TOSHIBA Power Saver utility has experienced a fatal problem and he has completed the program.

  Can anyone advise me on what I do:

  -restore default TOSHIBA Power Saver setting.
  -stop the runtime error occur
  -put things the way they were back.

  Thank you very much

  Seems so ;(
  I would recommend the recovery CD because the whole procedure takes about 10 minutes only.

  But don't forget to save your data if it's important.

• 'Toshiba power saver' need for my Portege 7020 (WXP)

  I have a Portege 7020ct that I updated to XP to 98. Everything seems to be fine, even if I lost the management of Toshiba power save options. I'm looking for the correct software control the brightness of the display, options, cooling etc.

  Hi Vandervell

  Sorry, but you won't be able to find this utility is not created for Windows XP Home edition. In my opinion, you can use the device without using the Microsoft just food options.

• Satellite L300-1F8 - how to uninstall Toshiba Power Saver?

  Hello

  I have Windows 7 on my laptop. Accidentally, I installed the saver of energy for XP and I can't uninstall it (error 0x7E).

  Do you know how to uninstall it?

  Hey Buddy,

  Normally the Toshiba Power Saver is designed for XP only so I think that's the reason why you can t uninstall it.

  In any case, you should try it with CCleaner. This freeware tool can also remove installed programs, as well as s worth a try! :)

• How to make Toshiba Power Saver working in Vista?

  Hello...
  Is there a way to make toshiba power saver works on vista?

  If not, is there any other 3rd party program that does the same thing? Or y at - it news that toshiba is developing this program for vista?

  thanx

  Hello

  you will laugh, but do you know who developed the powersaver for vista?
  It's toshiba (Yes :)), and all functions are adapted from current saver original toshiba XP. If you don't need to download anything, because all functions are already supported. :)

  So, just the question why do you ask? ;)

  Welcome them

• Tecra M5 - Toshiba Power Saver did not do his job properly

  Hello

  After looking for a tool to silence my Tecra M5 awhile, I found an apparently nice application called Toshiba Power Saver. Unfortunately this tool doesn't seem to work properly. I played with the [slider cooling method | http://img200.imageshack.us/img200/8008/powersaver.jpg] (click to see a picture) and here's how it works.

  The cooling method can be set to one of four options: battery optimized Performance, maximum Performance and cooling optimized, where one is supposed to be the quietest, and those of other more noisy.

  Assume that the cpu fan spins at high speed at the start and I do not have anything on my laptop. I move the cursor to the battery optimized setting, click on apply and the fan (instantly) slows down (yay!). Then I need to do something about hunger for a while and finally the fan turns up the noisy power level. I then doing nothing of the brand-new, but the fan is like that * ever *. The processor is as cold as ice, the air is blown could freeze the fingers, but the fan spins like crazy to wake up my neighbours on the road.

  I'm really sure that the cpu is cool? Yes. Why?
  Because when I move the slider for Performance affecting now and click on apply the fan slows down (right) and remains like that until I start working on something new. Then I stop doing what I was doing and the continuous spinning fan * ever * once again.

  So I change the method of cooling for battery optimized setting back again once, click on apply and the fan slows down... and so on and so forth, stuck in a vicious circle.

  The key to success here is keep pressing the button apply, which the Power Saver application should do from time to time and not me and not forgetting what it is here for.

  What is the problem with this app? Is there a fix available (or alternative)?
  The version I have is 7.11 and runs on XP Pro SP3.

  Hello

  What about your ad here?

  TOSHIBA Power saver is tool Toshiba use for years and it is preinstalled on 98% of all models of Toshiba laptops. So, in my opinion, this tool is certainly one of the best and most effective tool designed by Toshiba.

  Over the last 10 years, I have worked with many Toshiba laptops and I used this tool on each laptop to optimize my work. Mix between the good performance of the processor and method of cooling level offers enough power for each working day and with a low level in the method of cooling laptop runs pretty quiet.

  Maybe stupid sounds now, but I have noticed that the Portege notebooks are, perhaps, more sensitive and using tool electric saver you cannot have the same effect as on certain portable Satellite and Tecra.

  I do not think that this tool doesn't work properly on your Portege but Portege laptops have a specific design and material may reach a higher temperature faster than on the other laptop models.
  Portege laptops have excellent and powerful material packed in a box of small notebook.
  Sometimes laptop runs quiet and if you just connect the USB mouse the cooling fan starts to run strong enough. A small business can speed up physical activity and if temperature sensors have noticed a higher temperature for a degree C only, the fan control mechanism get information starts to cool the fan turns.

  It is really not easy to tell if there is something wrong or right. My personal opinion is that everything is OK. You can try to talk with the service of Toshiba. Call them and ask for explanations. They should have enough experience with this stuff.

  In any case, good luck!

• TOSHIBA Power Saver won't work on the account with limited privileges

  Good day to all.
  I have old Satellite 1410 and for security, I am working on an account with limited privileges. I can't start Toshiba Power Saver, I get "access denied" message.
  I need to remove energy saver and I use Control Panel Power Option, but I can not here the default brightness.
  Can someone help me?

  Janusz

  Without system administrator privileges, many system options are locked and could not be used.
  You need admin rights to access this tool.

• TOSHIBA Power Saver - fatal error OX50

  Hello

  Recently, I have a big problem, my Toshiba power saver.
  It triggers a fatal error OX50 and I tried reinstalling several times and it doesn't work.
  Please how can help me solve this problem?

  Hello

  Fatal error with Power Saver hmm I read a few threads on similar problems and it does seem that the completely OS restore Toshiba recovery CD could help settle the energy saver

  But may I ask if you install all the drivers in the correct order?
  Usually the installation instructions are always placed on the page of the Toshiba driver and it s necessary to follow this guideline.

• Re: Satellite L300 - 17l - Toshiba Power Saver gives me error after installation

  When I bought my L300 - 17l all the drivers of Toshiba drivers download pafe worked out well.
  Recently, I have reinstalled my OS XP and now I started to install all the drivers again. LAN has been authorized, WLAN was ok, the display driver has been authorized.

  But when I get to install Toshiba Power Saver (URL: [http://support1.toshiba-tro.de/tedd-files2/0/pwrsav-en-20080519172104.zip]) it gives me this error (it shows the error or after I cliquerai on finish the instalation or before installation began, as you can see in this screenshot)-[http://www.picvalley.net/v.php?p=u/2381/9078672171740560287.JPG]

  I later tried this - i go ot Control Panel and open Toshiba Power Saver, but then it gives me another error: "CANNOT be opened because you do not have access rights to use 'TOSHIBA Power Saver'.
  I reinstalled my XP again and it still gives me this error... I wonder what could be the problem... Please help me

  Hello

  Satellite L300 - 17L belongs to the PSLBCE series.
  I chose this model number and found exactly the same energy saving that you tried to install.
  So I guess that you have chosen the right Power Saver utility for this model of laptop.

  But did you also install the common Module?
  This software must be installed first before installing other tools.
  Update you the Win XP for the State?

  Check it!

• Satellite A100 - message: Toshiba Power Saver already started

  When I turn on with power supply connected, I get a false error message that says 'Toshiba Power Saver already begun'.
  How can I get rid of this message permanently?

  Hello

  I guess that the Toshiba power saver trying to load twice.
  Akuma s suggestion should work.
  Once the energy saver has been uninstalled, all entries that control energy saver should be removed too.
  After this, reinstall the new energy saver

  The alternative might be disables a power saver in msconfig.
  To ensure that the access the msconfig (in RUN type msconfig) and remove the mark of an energy intake that you might find in the Startup tab.
  Then restart the laptop and check if it worked