Portege R500: Impossible to install XP in Toshiba Power saver
I have a protégé R500 PPR50E which had Vista on it, but now has XP on it.
I installed all drivers etc for the laptop and everything works fine except that I can't get the toshiba power manager to install.
Whenever it installs programs it shows as 0.00 mb and installation when you click to open the control panel in the Add box, or move the section it says "a fatal error has occurred. This program will be terminated - code 0 x 0 - and then if I try to uninstall it to try a reinstall it says: "1628 - could not complete the installation.
Any ideas anyone?
I downloaded the correct driver of course - I tried a redownload and it made no difference.
Also - I may pluching at straws but in the Bios before I made the construction - I turn the controller as opposed to ACHI ACHI compability mode - don't know if it could have an impact on it? -If I turn that on XP blue screens because I never installed the driver in the windows install (f6 prompt)
I believe that you are unable to install the Toshiba power saver.
We should focus on this error message:
* 1628 - cannot complete installation *.
Usually, this message may appear when installing any software that uses the InstallShield Setup program. According to InstallShield, this is a general error message indicating that the application has not been installed successfully.
Solution check this:
When I had to test my battery and created a new setting of power on my laptop, I accidentally deleted the default schema TOSHIBA Power Saver of my those listed on my utility on Control Panel Power Options.
I tried to restore the Toshiba utility, by recreating a power scheme called "TOSHIBA Power Saver" - but Power Options says that there is already a framework plan of the same name.
When I start the laptop, I get an error message saying that the TOSHIBA Power Saver utility has experienced a fatal problem and he has completed the program.
Can anyone advise me on what I do:
-restore default TOSHIBA Power Saver setting.
-stop the runtime error occur
-put things the way they were back.
Thank you very much
Seems so ;(
I would recommend the recovery CD because the whole procedure takes about 10 minutes only.
But don't forget to save your data if it's important.
Hi, I can not install driver of toshiba power saver on my laptop because instalation crashes with error 1610: the configuration data for this product are damaged. Please contact the support staff. I tried several versions of driver of standby power. I received the latest official chipset driver... Someone knows how to fix this?
My second problem is with the battery, my laptop running on battery max 10 minutes (I have my laptop for 2 years) and I often force using battery power. Battery can lose so much capacity in 2 years even if I used for my battery once a week?
Sorry for the English and thx for answer
I think that you should not install this driver, the only saving electricity only.
What about the battery? In my opinion, it is possible. In my opinion, the duration of battery life cannot be defined so easy.
Some batteries perform well after 3 years of use, and some of them are dead after only a year.
I have a few related problems and would like to have someone to share knowledge on issues with limited on a portege r500 user rights!
My question is: how could I access "toshiba power saver" as a user restricted?
My source of knowledge not administrator is a very sophisticated page of http://blogs.msdn.com/aaron_margosis
who said that my way to get an administrator back - Box (see: "MakeMeAdmin" - in German windows xp, you must edit the MakeMeAdmin.cmd file and replace the "Administrators" by "Administrators").
But my problem with "toshiba power saver" is still not resolved.
So I'd be happy to get information on your und solutions give you my knowledge as well, of course!
You can use the feature Toshiba Power Saver Properties-> configuration Options (bottom left button)-> allow a limited user to change settings
I have a Portege 7020ct that I updated to XP to 98. Everything seems to be fine, even if I lost the management of Toshiba power save options. I'm looking for the correct software control the brightness of the display, options, cooling etc.
Sorry, but you won't be able to find this utility is not created for Windows XP Home edition. In my opinion, you can use the device without using the Microsoft just food options.
TOSHIBA Power Saver for W - XP cannot be installed.
Installation error messages: fatal error, abandoned facility. 0x2
Try to remove the part which is installed (visible in Add/Remove Programs), gives the same error message 0 x 2.
Under programs > Toshiba only the help file 'Power Saver Help' is visible, but is not accessible.
Can someone help me?
Drivers and tools must be installed in the correct order!
I googled a bit and found this order of installation for this laptop model:
Windows XP Service Pack3 (RTM)
2 KB898458 KB898458
3 KB936181 KB936181
4 KB936782 KB936782
5 Sun Java 2 Runtime Environment V1.6.0_06
AMD 6 RS780M/MC, RX781 + SB700 Chipset Module V5.10.1008.8
7 AHCI Driver V3.1.1540.61
Processor AMD 8 V184.108.40.206 driver
9 AMD video driver V8.479 built-in
9 AMD M82 / M86 video driver V8.477
10 Conexant CX20561 Audio Driver V220.127.116.11
11 Marvell 8040/8072 LAN Driver V10.57.4.3
12 Synaptics Touch Pad Driver V10.1.7.0
12 ALPS Touch Pad Driver V6.0.305.11
13 V18.104.22.168 Conexant Modem driver
Reader of cards 15 O2 OZ129 V3.23
16 modem region Select utility V22.214.171.124 (RST223MAC02)
17 driver Atheros Wireless LAN Driver V126.96.36.199.0.x32_wCAT
18 Atheros Client Utility V188.8.131.52.0.x32_wCAT
20 V6.2.238.0214 Chicony camera software
21 Bluetooth Stack for Windows by Toshiba V6.10.07T.2
22 Bluetooth Monitor V4.02 (Build20080122)
23 TOSHIBA SD Memory utilities V184.108.40.206
AES1610 24 Authentec Fingerprint Utility V220.127.116.11/V18.104.22.168
TOSHIBA ConfigFree V5.90.09 25
26 TOSHIBA Assist V1.03.00upd4
27 CD/DVD Drive Acoustic Silencer V1.00.008
PC Diagnostic TOSHIBA 28 V3.2.8 tool
29 TOSHIBA Touch ED V22.214.171.124
30 TOSHIBA Hotkey Utility V126.96.36.199
V188.8.131.52 utility TOSHIBA 31
TOSHIBA 32 Control Utility V184.108.40.206
33 Toshiba Power Saver V7.04.02.Q
34 Toshiba zooming Utility (smooth view) V220.127.116.11c
35 GST Init V18.104.22.168
* Note *: not all listed drivers or tools are released on the Toshiba driver page
So install only those drivers and tools that are available on the page of the Toshiba driver and follow the order listed above.
So I have a PC laptop Toshiba A100 and I just upgraded the operating system factory (XP), Windows Vista default. Anyone know if it is possible to adjust the brightness of the screen in Vista without Toshiba Power Saver? Or y at - there a way to download Power Saver from Toshiba for Vista? Thanks for any help!
In Vista, there is no Toshiba Power Saver as under WXP and now many parameters have been taken on Vista power settings. With other words Toshiba Power Saver is not like in the version of Windows XP Home edition. The Toshiba Power Saver is now part of the package of added value.
When this package is installed you can set the screen brightness as before using FN + F6, F7 key combination.
I can't install/reinstall/remove/run Toshiba sleep on my Satellite M45-S169. After I reinstalled the system (now it is Windows XP Professional SP2). When I tried to open Power saver via Control Panel I saw denied it, and every time that I reboot the system, I get the error message:
Toshiba power save
A fatal error has occurred. The program will end.
I can't delete or reinstall energy saver. Can I try to run saving for Windows XP SP2 applies for other laptop models? I couldn't find one for my model. That one will fit? Any other solutions / advice to the problem?
Thank you very much, Oksana
First of all, you knew that this laptop was designed for the U.S. market and all the drivers, tools or any other Toshiba utility should be used on the Toshiba site we.
Please make sure that you have already installed Toshiba ACPI common Modules before as you continue to any other Toshiba Software installation.
An important tip; the Toshiba power saver profile must be selected in the Windows power options! Don t forget!
I have problems with Toshiba Power Saver.
I bought my laptop in Austria with windows German. But I installed the English version and it came the problem. Everything worked except 2 utilities. I tried to install from the recovery CD, but they does not work.
So I installed Toshiba power saver, but it did not run. When I click on Control Panel and Toshiba power saver comes the message:
"Cannot be opened because you do not have access rights to run Toshiba Power Saver" I am logged on as administrator.
So, I don't know. I tried to download on the internet, but the problem remains. In XP media center edition German, everything works, but in my XP with SP2 not.
In my opinion you should post at first what model of laptop, you have exactly.
In any case, for the installation of simple tools and utilities not use CD recovery given the image of the installations. For utilities or simple tools, you can use the Tools & Utilities CD or download it from the download page.
If I understand your ad directly the energy saver is preinstalled on your device, but you can't use it. Because of this, you should not attempt to go back. Please do not forget that you logged in as an administrator and not a user with limited permissions.
I tested it on my device and only if I am logged in as a limited user can't launch energy-saving. As an administrator, I can do what I want.
Toshiba power saver recently stopped working - I deleted and it redownloaded this site, now whenever I try to start the installation, I get a message "Cannot be the computer id" and stops the installation.
For the first time post here so if I'm on the wrong forum or you need nothing else apologies in advance.
where you´ve have downloaded the powersaver? Maybe you downloaded a bad for your machine. It s absolutely important to download EXACTLY this software that fits your type of machine.
When you download stuff on toshiba Web sites you will have to keep an eye on the version on your machine (for example the Satellite A100 - 552-> download software of type '552' of the Satellite A100 series).
Sometimes, this solves a lot of mistakes and clarify some not very nice situations.
Please, more details on your problem. :)
I have problem with Toshiba power saver - it does not work.
I have not found a driver for Vista 32 bit here.
Toshiba Satellite L300 PSLB0E-04R012RU VISTA HOME PREMIUM
Thanks for your help
What do you mean with it does not work?
What energy savings you used?
The Vista operating system uses clean power options and there is no special Toshiba Power saver for Vista as for Win XP
Maybe you tried to install the saver of energy for Win XP?
Where can I download Toshiba Power Saver for Windows 8 x 64?
C850-1E7 satellite was already pre-installed with Win 8.
All Toshiba drivers and tools must be preinstalled too so I t understand your request because the energy saver
However, Windows Notepad 8 preinstalled don t contain the value added package plus this package was for Win Vista and Win 7 and Win 8 upgrade, but there is no PPV for units that are already pre-installed with Win 8.
I am owner of a Qosmio F50-108 and I can't seem to find Power Saver utility from TOSHIBA.
What is the same thing that the utility options of power on the control panel? I've seen screenshots of power saver utility from Toshiba which is supposed to be delivered pre-installed on their laptops, but the one I saw was on a Qosmio G10.
The series F50 there as well? If Yes, where can I find it?
As far as I know that the Qosmio F50 comes with Windows Vista and not XP.
TOSHIBA Power Saver is only available for Windows XP because Vista has the same functions as energy savings. The energy saving features are now an integral part of Vista.
I've created an interesting article here in the forum for you:
I have problem with Toshiba Power Saver (GST).
I installed SP2 on my WinXP Pro, and after this operation, all works well. After a few days GST on icon disappear from the task bar. When I open the Console from Toshiba, then GST I can see only incomlete standard dialog box. There is no configuration icons, but initially were, and I set all the settings. Now, there are 4 black boxes (2 small as a small icon) and 2 large as icon bigest at the bottom and a large black on the right.
I try to reinstal GST, but it had no effect.
Can someone help me
I have never seen anything like it. There is obviously some problems that doesn t allow the graphic illustration of the ATP. The first step is always reinstalling the software. I don't know what you need to do exactly. In my opinion, you should try to remove the GST and SP2. Install SP2 again and after this GST.
If there is not the worst success solutions are preinstall the device using the recovery CD.
as I've seen here in the forums a lot of users of Toshiba laptops has the problem of a noisy and often fan running. The Toshiba Power Saver 22.214.171.124 installed on my satellite M30X-167 seems to not have the feature of switching on the CPU to load dynamic processor.
There SpeedswitchXP - CPU frequency for mobile control Windows XP on http://www.diefer.de/speedswitchxp/index.html
Does anyone of you have a positive experience with the help of other register controls as the original from Toshiba?
Doing dynamic CPU speed control significantly reduced the activities of fan?
Best regards and greetings from the Germany
I had already installed on my Tecra M1. It worked fine, but I n t notice a big difference. Can you please tell me what laptop do you have?
In my opinion, you can try to install it. On my unit SpeedSwitch works properly without any problem, but AFAIK the tools as it works well on laptop computer desktop map mother don t allow this tool may have information on the temperature or things like that.
As I said you can try it.
Maybe you are looking for
Hello Can I delete an event files in the bundle of fcpx without mishap? I tried to delete them in FCPX, but it does not work. The event, in that they were damaged when connecting the drive cable broke. As soon as, an event I had lost both its icon, s
I've recently dumped Outlook calendar and moved to iCal (and new to the Mac world and love it). in Outlook if I change the date of an event it passes the event to that date. How do I in iCal? I have change the date in the case where, but I don't know
I'm creating two two-dimensional table by decimate a table 1 d and then using the function array of build to create the table in two dimensions from it. Does anyone have an idea why it doesn't work? I think it should work. I did something similar to
I have a problem getting the color in the window Xp sp3 using microsoft office by adding any character color and recently I installed Trend Micro antivirus for my computer in which Trend Micro security agent page display no color at all.
The IUR has a group of 20 keys of all associated with the same callback function. There is a case statement for each button that makes a bunch of stuff when you press this button. Here's the question: When you access the statemachine code, I need to