Portege R500 - internal SD card reader not working not

Similar Questions

• Portege R500 - Bluetooth PC card mouse not recognized

  I am trying to use a mouse with my R500 bluetooth PC card, but it is not recognized when I insert it in the PCMCIA slot.

  The light. I need to change any settings?

  Hello

  Usually, the PCMCIA card should be recognized directly after that it was inserted in the slot.
  There is no special driver for the PCMCIA. It s a BIOS according to the function.

  What you could do is to change the device configuration option in the BIOS.
  I think that it s on the second page in the BIOS.
  It s set configuration by OS. I recommend that you change this.

• Internal SD card reader not recognized by X 40

  The hardware device manager says OK for Secure Digital Host Controller, the little green light next to the card slot is on, but since it appears no icon for SD under MY COMPUTER the card inserted SD is not accessible. Uninstalling and reinstalling the driver (osda06us.exe) does not help. What can I do else? G.R.

  Found the solution: need to my win xp sp3. GR

• The M70-267 Satellite internal memory card reader does not work

  Hello

  Internal memory card reader no longer works on my M70-267.
  Device Manager reports the error with the driver of the bus PCI 6 mass storage controller, device 4, function 3.
  The first problem, the result of this is?

  Help, please
  thanx

  Hello

  Yes, this mass storage controller could be the card reader. So, you can try to reinstall the drivers, which can be downloaded here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  or you can remove it from the Device Manager and restart your machine

  or, if that didn't help then you should send your machine to a service partner chartered for an assessment of health/repair of equipment.

  To find the closest, you can check out this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck
  See you soon

• Internal SD card reader of the A200 Satellite no longer works

  When I got to my Satellite A200 worked the internal SD card reader, and then after using it once it has never worked since then, and I got it almost a year now.

  I was wondering if I m the only person having this problem or if someone could help me.

  Thanks in advance

  Hi Dan

  I assume that your problem could be linked to the SD card reader driver/software anomaly.
  In most cases the installation of the new driver can help solve these annoying problems.

  First, you need to go to Device Manager and must check the status of SD card reader. Sometimes a yellow exclamation point may appear if something is not wrong with the software or the driver for the SD card.

  In any case, if the yellow exclamation point appears or not, you should remove the SD card from the Device Manager reader and reboot the laptop.

  Then you should install the new downloaded SD card driver and need to check if a SD card compatible and taken in charge would be automatically recognized in the A200 SD card reader.

  Good luck Dan

• Internal SD card reader does not recognize SD card

  I have an internal SD card reader I have ever used before.  I am trying to download pictures from an sd card that I used on my desktop and it works fine, but when I insert in my laptop nothing happens. I went to start / my computer and there is no driver does not list other than my cd/dvd driver. How can I fix it?

  Mini SD cards and adapters are the hassle that I connect
  my phone with a USB cable for uploading photos.

  In any case...

  The card reader should not require no installation. If this is not
  recognized, it can be fried or it is possible, there could be a
  loose connection inside the housing.

  Watch the following video tutorial:

  Install the media player.
  http://www.YouTube.com/watch?v=_LWrxN6W5Bc

• Xubuntu and internal SD card reader

  I use Xubuntu (Fiesty & Gutsy) on my Portege A100 for several months now, and everything seems to work fine except for my internal SD card reader and the inactive recovery. I managed to solve the problem of the recovery by turning off suspend but haven't found anything + that could help get the work card reader.

  If someone managed to solve this problem?

  In your case, there is only a problem: Toshiba does not support Linux OS and there is no driver that can make the SD card works properly. What you can do is to visit a few pages on Linux on Toshiba laptops. You might find something there.

  http://newsletter.toshiba-tro.de/main/index.html
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm
  http://www.Linux-laptop.NET/Toshiba.html

  Good luck!

• Internal Ricoh card reader of W700 XP x 64

  I am very pleased that lenovo has finally decided to release Windows XP x 64 drivers. However, the drivers for the internal SD Ricoh card reader do not work on my W700 (2757CTO). When I insert an SD card into the reader, the LED lights but no drive does appear in 'My Computer' or 'Management\Disk computer management. " The driver installation went well and allowed also Ricoh three controllers (Memory Stick, SD/MMC, xD-Picture Card) for Device Manager. The Panel "Add or remove programs" lists a "ver.3.58.01 R5U8xx RICOH Media Driver' that this is supposed to be. I tested on a XP minimum 64 over x and the same SD card works fine in other two readers of cards (USB and ExpressCard). I also have Vista, x 64, and 7 x 64 on the same computer and the drive works properly under the two BONES. Any suggestions?

  Thank you

  I found a solution myself. The problem is not caused by the Ricoh/Lenovo drivers but by the Microsoft SD Bus driver, which does not support the SDHC. There is a hotfix for x 86 XP provided by MS (KB934428). For x 64 However there is only a non-official source:

  http://thehotfixshare.NET/Board/index.php?AutoCom=downloads&ShowFile=9395

  The x 64 new driver is Microsoft as well and I don't know why they don't officially offer it on their own site. At least, after you install this fix my card reader SD working properly.

• X61s internal SD card reader vs Pro Windows7

  I have a laptop Lenovo ThinkPad X61s PC with an internal Ricoh SD card reader that worked well until the upgrade to Windows7 Pro.  The device does not appear in Device Manager, but the lamp flashes during insertion/withdrawal of a card (regular or HC).  Has anyone in the community of ThinkPad found a resolution?

  Well you send messages to a group of users win, not the Lenovo Forums

  Did you first run the win7 compatibility checker before installing win7?

  Did you visit Lenovo support to see if this model is compatible win7?

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-67971

• Portege R500 - CD/DVD drive no longer works

  Does anyone found a resolution to this?

  Like David, my DVD Multidrive on my R500 abruptly arrested recently - I can open/close the player, but he does not appear in Windows Explorer as a disk is valid. Do not think that I have nothing installed on the machine.

  Interestingly, I never really use the DVD player. Indeed, because of all the * heat * questions, I used to "Power Off" of the device, via the DVD icon in the system tray (i.e. option enabled me to Power on / off the unit). So while the power was OFF, it's cold the machine, and so the fan was rarely on.

  Now that my computer no longer recognizes the drive, this icon it simply shows that disabled, no possibility to the power on/off switch, and this noisy fan is almost always on. In addition, because it seems that the machine tries to recognize the drive subject time at startup, all re-start, reboot the machine now takes a few minutes to start...

  For the optical drive firmware update help? Or is there some other fix?

  Hello

  > but my Portege R500 CD/DVD drive has stopped working the next day, I had attached an external CD - RW drive for me to burn discs. Maybe it did disable my built-in drive?
  This could be the key;
  Try to access the Device Manager and remove the CD/DVD player listed and all USB host controllers and USB root hub.

  Again, restart the laptop.
  After new check restart if the CD/DVD drive has been recognized again.

• Cannot get my usb card reader to work because I plugged my new wireless broadband

  HI MY PLUG-AND-PLAY DIRECTED BY ABC PRODUCTS USB CARD READER WAS WORKING UNTIL WEEK LAST I CHANGED MY CONNECTION TO BROADBAND CABLE TO CONNECT NEW WIRELESS I UNPLUGGED AND REPLUGED INSIDE BUT STILL DOES NOT?

  JOHN SOON

  Hi John,.

  1 Windows operating system you are using?

  2 are you facing issue with other devices usb also?

  You can read the following article and try to run the material Fixit and see if it helps.

  Hardware devices do not work or are not detected in Windows

  Hope this information is useful.

• my card reader stop working) windows for the 4640 gateway dx vista

  my pc gateway dx 4640 windows vista 64-bit

  When I insert the card compact flash drive port doesn't work how can I fix this problem appreciate any help to solve this problem

  Thank you and have a great day...

  Hello

  I was faced with the security issue, try updating the chipset drivers.

  Read the following article.

  http://support.Microsoft.com/kb/933442/en-us

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/Windows-Vista-Home-Premium-wont-read-microSD-card/18b8a188-04af-44C5-A59C-27a03f41b91e

  http://www.Vistax64.com/Vista-hardware-devices/84205-SD-card-reader-not-working.html

• Cannot get my SD card reader to work on my computer. Desktop computer.

  Work does'nt drive SD card, no error message.

  Hello

  If you can not get the card reader to work, it can be replaced and/or an external card reader is not expensive.

  They go bad sometimes. Try these:

  / Settings (BIOS/CMOS) often F2 when you start then look at the screen - make sure that the USB port is enabled.

  ------------------------------------------------------------------------------------------------

  Control Panel - device - hard drives - SD card Manager or similar - double click - Driver tab - click on update drivers (this will likely do nothing that MS is far behind the certification of drivers) then right clicked UNINSTALL.

  Now get to the USB controllers - right click - UNINSTALL everything in the category at the moment, EXCEPT the category itself - REBOOT. This will refresh the USB driver stack.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there. You can remove all instances of the drive and restart again.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  Start - type in search box - Windows disk - find Windows Disk Management on the list at the top - right click - RUN AS ADMIN search to see if there is a drive letter assigned or a conflict.

  Check with the manufacturer of your system for the updated drivers - some card readers to do not use the windows drivers.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Win 7 Pro. Card reader not detected. Card reader does not appear in Device Manager, or the computer.

  Windows 7 Pro.  Dell desktop computer.

  My integrated card readers (there are 4) do not work.  They do not appear in Device Manager.  They do not appear in the computer.

  In Control Panel > programs and features > I uninstalled the Realtek card reader.  Then installed latest version of the Realtek site.

  Control Panel > troubleshooting > hardware and audio > configure device > says hardware changes could not have been detected.

  Tried system restore, but it failed.

  What should I try?

  Thank you

  Hi Bruce,.

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that the card reader does not work on your machine, Windows 7 Pro. I will certainly help you get this fixed number.

  I appreciate your efforts to resolve the issue.

  Since you've already tried several troubleshooting steps for the fixed number. I wish to inform you that this problem can occur because of compatibility issues. I suggest you refer to the suggestions of Work Sam Varkey responded on December 28, 2009 in the below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/memory-card-reader-not-working-with-Windows-7-x64/6f8f5122-70dd-48D4-A083-09fdef8612e3

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Internal SIM card reader

  Hello.

  Can someone tell me which option should I choose to have an internal SIM card reader on a carbon X 1?

  -Integrated Mobile Broadband extensible

  -3G N5321 Ericsson

  -LTE Sierra EM7345

  Thank you.

  Hello

  You will get a reader of card SIM in all cases you listed, like antennas wwan well inside the lid of the laptop. The difference is:
  -l'article 1 means there is no wwan card preinstalled, you can do it yourself later.
  map - 2nd - 3g is pre-installed;
  -3rd - card 3 g/LTE is preinstalled.