Portege R500: SDHC card can be read in the SD slot

Similar Questions

• I can't read the policies of Burma in this latest version of firefox, which can be read in the old version.

  I can't read the policies of Burma in this latest version of firefox, which can be read in the old version.

  This happens with other languages?

  • http://en.Wikibooks.org/wiki/Unicode/Character_reference/0000-0FFF
  • http://en.Wikipedia.org/wiki/Unicode_plane

• The graphics card can be improved on the Equium L40 - 10 X

  The graphics card can be upgraded on the Equium L40 X 10 in order to play games.

  As I m not wrong not this theme is one of the most discussed topics here in the forum and there is a lot of discussion about these issues;

  The question is simple and brief; No you can not pass the GPU because it s fixed and soldered on the motherboard.

  About Buddy :(

  Welcome them

• data has been replaced before it can be read by the system

  Hello

  I use a flow sensor that creates a frequency output and which connected to my PCI-6035E. When I run it, it works for a few seconds and then gives an error. Error 200141 ' data has been replaced before it can be read by the system. " I also tested with a pulse rather than the flow sensor generator, and the error only when I changed the frequency. How can I solve this prolem?

  Thanks in advance!

  Thank you for your answers, Bob.

  I got it now works, the problem was that I was using continuous samples. I am now a single sample with a while loop and it works.

• My errased sticker product key and I can't read all the text to reactivate my windows visa. What should I do now?

  My errased sticker product key and I can't read all the text to reactivate my windows visa. What should I do now?

  Hello

  You mean the sticker on the case of the Vista operating system pre-installed from Dell, HP, Acer, Toshiba, etc.) ?

  If you do, you can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  See you soon.

• What can I do if I can't read that the key is for Windows because of the part of the key on the sticker has rubbed off and must be re-installed Windows?

  The key to Windows inlegible sticker, want to reinstall windows

  What can I do if I can't read that the key is for Windows because of the part of the key on the sticker has rubbed off and must be re-installed Windows?  The product ID is located under the control panel > system maintenance > system > Windows Activation of a useful?  I don't want to end up with a Clipboard after that reinstalling Windows because I have a legitimate copy of Windows, but the key became disfigured over time, since it's on the bottom of the laptop.  I have Windows Vista Home Premium SP 2 running on a Dell Inspiron it's way outside the guarantee of its window.

  Thank you!

  Hello

  If you have a product key on a sticker in your computer, this means that you have an OEM product key. If you have OEM keys, this means that the windows you have here is preinstalled.

  If you reinstall windows OEM copy, you must use either the original manufacturer recovery disk or the recovery partition. If you use one of the people, should not be put to any start-up because the windows OEM versions are technically preactivated.

  If you don't have a disc or a recovery partition, you can contact your OEM (DELL) so that they can send you a disk. Alternatively, you can contact Microsoft Support just in case. : D

• I tried to convert doc to the pds.  He converted all the files in you folder to the pds.  The problem is that I can't open any files without buying adobe.   I can't unconvert so now I can't read all the files?

  I tried to convert doc to the pds.  He converted all the files in you folder to the pds.  The problem is that I can't open any files without buying adobe.   I can't unconvert so now I can't read all the files?

  Hi chrism43238735,

  May I know the process to convert Doc to PDF files. If you use Acrobat to convert the files, and then with the same application you open.

  If you used another process, in this case try using the Adobe Acrobat Reader application. Adobe - Adobe Acrobat Reader DC Distribution

  Thank you

  Abhishek

• The amount of additional memory can be placed in the second slot. Best battery?

  The details of my laptop are: system manufacturer Hewlett-Packard model system Presario V6000 (GG228PA #ACJ) Type of system based on X 86 PC processor x 86 Family 6 Model 14 Stepping 12 GenuineIntel ~ 1862 Mhz BIOS Version/Date Hewlett-Packard F.25, 12/05/2007 SMBIOS Version 2.4

  Total physical memory 512,00 MB DDR II. (2 Rx16PC2-53005)

  1. how much additional memory can be placed in the second slot.

  2. If I use only one slot, the total amount of memory can be placed?

  3. What battery Ah maximum can be changed to the existing farm CT: 6301501BB UNFRJ and its cost?

  Maximum total memory is 2 GB and the unique maximum is a 1 GB module. It uses of the SO-DIMM DDR2-533

  This is a new battery 12 cells on eBay:

  http://www.eBay.com/ITM/95W-genuine-rechargeable-12cell-battery-fit-HP-DV2000-dv6000-V3000-V6000-EV089AA-/390317484515?PT=Laptop_Batteries&hash=item5ae0bc29e3

  It will be a bit curved on the bottom but the most long-life battery, that you can buy for him.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite P200-1JY and Win7 - SDHC card can not be read

  Hello
  I am owner of a Satellite P200-1JY, my OS is windows 7 and I can't read SDHC cards, but only the SD card.
  On the same PC under windows XP, I could read SDHC cards!
  So I should have a driver problem?

  Thanks for your help.

  Hello

  First of all, I checked your manual for Satellite P200 and it supports the following types of SD card:
  -SD up to 2GB
  -SDHC: 4 GB

  You use these SD cards or with more capacity?

  If you use these supported cards I will try to update the driver of the card reader. You can try the Flash Media Driver for Vista, you can get on the official page of Toshiba.
  Check this box!

• SDHC cards can be formatted NTFS?

  I would like the "NTFS" format so that I can save copies of my regular Outlook Backup files on SDHC cards!  I use Windows 7 on both of my computers.

  When I try to copy the Outlook Backup for SDHC cards I have, I get a message on the file is too big, although the display of properties seems to show that there is enough space!

  The cards I have are shown are formatted as "FAT."  I guess that the problem has something to with the "block size" of the file linked to the "block size" used in the 'FAT' format!  If this ISN ' T my problem, WHAT is?

  If I can format/reformat a SDHC card to NTFS to solve my problem, please give me instructions step by step.  If there is another solution, I would certainly receive!  On my e-mail address please reply!

  Thank you

  Terry_838

  Hello Terry,

  No problem. A call for freeware Aomei Partition Wizard is what you need, download here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 (use only download Direct link).

  Once installed, you

  1. Select the SDHC card.
  2. Activities of partition select Partition.
  3. In the dialog box that opens, you specify the name and the format (NTFS)
  4. Click the OK button.
  5. Click apply on the toolbar.

  Its really as simple as that. Let me know if you have any questions. Post your results here and let me know how you fare.

  Kind regards

  BearPup

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.

• SDHC card do not work on the Satellite A200-1J0 with a clean Vista install

  Greetings,

  When I bought this laptop he had 32-bit Vista preinstalled and as usual some Toshiba drivers and software. As I remember there wasn't that no problem with no built in memory card reader, he read regular SD and SDHC cards.

  One day I had to reinstall the operating system (without using the recovery disc) and I downloaded the drivers for my laptop's official website, install and the card reader now is not able to read SDHC cards. Is it me?

  That's what I installed for the reader:

  -Toshiba Value Added Package, where is TOSHIBA Flash Cards inside
  -Flashmedia driver
  Utilities - SD

  I just want to underline that there is no problem with reading mmc or normal sd cards.
  My sdhc card is 100% works correctly with other card readers.
  Another sdhc card I have does not work, it's just that I put anything inside the player.

  Just nothing happens.
  Is there something else that I missed, and it is the reason for my problem?

  No fix for Vista or something like that?

  Hello

  You the problem with SD cards are certainly related to the software I think that your drivers/utilities are installed isn't properly (in order) or on Vista may miss something.

  Maybe you don t know what important thing;
  It is very important to install the driver (no matter that drivers;) XP or Vista) in the right order.
  For most an installation instruction is placed on the page of the European driver Toshiba, which contains the essential installation order.

  As I m not wrong not the A200-1J0 belongs to the series PSAE6E and you must choose this series first to get all the compatible drivers for you series.

  By the way;

  The Flash Media Driver is a bridge Media Slot driver. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.
  The SD utilities contains utility Format SD Memory Card and other SD functions like utility of SD memory.

  These three applications are very important to use SD cards.

• Portege M700-7008 how can x - I recover the system if F8 ist is not possible?

  The Notbook has an invisible partition from which the system can repair or restore. Theoretically, should I start with f8 in the meantime. It does not work.

  The main problem is to change the mini. I must begin by LAN to disable. After the reboot: 'NTLDR is missing... ". »

  After a lot of experience, I think, I did more damage than necessary.

  "NTLDR is missing...". "also, if I start with F8.
  With F2 or F12 I can get a surface from which I get CD, USB stick or memory card can begin.

  Can I get from there to somehow invisible to the system recovery partition?
  The device is without Recovery DVD. If asked by the store, if I can get a. If get me one, I still don't know. Currently I have none.

  Thank you

  P.S. This is a Windows XP Pro (Tablet)

  Hello

  I think that there are not many things to do

  If you have an original CD of Microsoft Windows XP, then you could use and might star of the repair console. But to be honest it really delicate s to use the console repair XP and you've got limited access capabilities.

  But it looks like you don t have this CD and so you last resort would be the new installation of the OS.

  Good luck

• The CR in a Variant can be read as the condition of termination for VISA's READ?

  Hi guys, I'm reading a data using VISA READ variants. The VISA READ is set to finish reading when he sees a return transport.

  Is there a chance for the Czech Republic 'wrapped' in the variant to be read by the READ VISA and get him to terminate?

  See you soon!

  Because with flatten it to channel you essentially send a binary representation of the data, you will have problems if you have the character to stop activated since byte 13 would be part of perfectly valid data and represent not only the end of a transmission.

  What you can do is to disable the stop character.  Of course now you don't know how many bytes to read.  Therefore to precede your message with the number of bytes that are a part of the message (string length).  You can use two bytes, (one byte only give messages up to 255 characters long.)

  Now on the end of your reading, read 2 bytes, convert them into a number and this number to the next reading VISA will then read that many bytes.

  For examples, look at the TCP/IP read examples of writing in the finder of the example and you will see how they send a message with 4 bytes to tell how much data made up the rest of the message.

• What video card can be added to the s330f to support two monitors?

  I want to add a second monitor to my HP Pavilion s330f.  I think I'll have to add a video card that supports two monitors.  Since this is a slimline box, size is a matter in addition to compatibility.  What cards can be used?

  I was unable to locate a "s330f" on HP support site. Please provide the number of name and/or product of full model specific aid. Assuming you have a HP Pavilion Slimline s3300f desktop PC, the power plant is only rated at 160 watts and there is no PCIe cards x 16 graphics in your computer's power market will be based.

  Depending on what you plan on using two monitors, because there may be an alternative to a new power supply and graphics card.

  (1) Day trading, word documents, spreadsheets and other... buy an adapter USB-to-video as the EVGA UV plus + UV19 or UV39.

  (2) game... not recommended

  (3) source a bigger power supply and the new graphics card for HP

  (4) source of a greater power of athenapower.com and a graphics card 'low - profile' from another source.