Portege R500 - USB ports no longer for 35 to 60 seconds after standby

Similar Questions

• None of my USB ports no longer works

  Original title: activate the usb port

  Suddenly, the usb ports no longer work.

  Used a recoverypoint, but did not help

  Remove all usb ports and new discovered computer and installs but no result.

  There is power on the ports becase that a usb fan works

  What to try?

  Hi JoopSteenhuis,

  Try the methods and check the results below:

  Method 1: Run the patch from the link mentioned below and check if the issue still persistent.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 2: Remove and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

  b. click on the hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right-click every device under the USB Bus controllers node, and then click Uninstall to remove one at a time.

  f. restart the computer, and then reinstall the USB controllers.

  g. plug in the removable USB device and perform a test to ensure that the problem is solved.

  You can also see the following article for more information:

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

   

  I hope this helps.

• USB ports no longer work

  all usb ports no longer work and I tried to fix all the methods have failed and he tells me that all drivers are installed and work properly... not

  all my devices that worked in one of the 3 usb ports. I tried all methods on the 'help' with questions. I get a msg that says that all devices are up to date and working properly but it always starts as "computer does not recognize this device ' click here to solve. I can't solve

  Hello

  You did all the people?

  Try a Place Upgrade or repair Installation. If this does not work, you will need help of a
  real computer store (not the leeks and the glances at a BestBuy or other big box stores) or the system
  Support from the manufacturer.

  This tells you how to access the System Recovery Options and/or use of disks of Vista
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  --------------------------------------------------------------------------

  Or you could do a clean install.

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite Pro L20 USB ports no longer work

  Hello

  A little bit ago, I experienced a few problems with my Satellite Pro L20. After he brought to life, I found out that the USB ports no longer work.

  Things I've tried so far:

  Reinstall the chipset drivers
  Update the BIOS.
  Ensure USB is enabled in BIOS
  Uninstall and reinstall the USB controllers via the Device Manager.

  

  The USB ports no longer work and I ran out of things to try. Any suggestions?

  Thank you

  Hello

  If possible, try to install the operating system with recovery media. On this way, you will have to factory settings. It's the best test you can do. If the problem persists, it may be a malfunction of the equipment. Sorry but on this path is not easy to tell what the problem may be.

• Firefox regularly (every 8 to 15 seconds) freezes for 1-3 (in seconds) after a half hour of work

  Firefox crashes on a regular basis (every 8 to 15 seconds) for 1 to 3 seconds after half an hour of work. I freshly installed my windows and firefox (without extensions), but the hook has yet occurred. Don't know how to solve this problem. Maybe it's a memory problem? (I have 4 GB of RAM, which should be enough). When it crashes, it leaves to scroll through, write or do something else, but if I try to do, he says, but after a few seconds. This happens regularly, it's very annoying, especially when it crashes looking at youtube - video stops, turn on audio and a video catches up with a video after a few seconds. Thank you very much for the help.

  This has happened

  Each time Firefox opened

  Is very long

  Try running Firefox in questions to troubleshoot Firefox in Safe Mode. If that fixes it, disable extensions 1 by 1 to find the culprit.

• Display works only for 2 or 3 seconds after it is black on the Qosmio G50

  Hello

  I have a problem with my G50.
  On starup display only works for 2 or 3 seconds after it is black, I connect to an external display and using FN + F5, I can see everything on the second screen, if I turn to the internal using FN + F5 display, it works just the same 2 or 3 seconds.

  Thank you

  Hello

  Looks like an internal display of FL inverter delivers hardware problem but I think that it s display.
  It s certainly not display card problem because the external monitor works properly so I think that s no GPU, but screen FL inverter.

  I recommend to ask a technician of Toshiba laptop for a detailed audit of the part material

• Portege R500 - DVD is no longer working

  Someone at - it ideas why my DVD drive has stopped working?

  I have a Portege R500 - 11 c and in Device Manager I have a yellow exclamation mark against Bus USB controllers / USB Mass Storage Device
  When I click through for more details, he said:

  Location: Port_ #0004.Hub_ #0005

  "This device cannot start. (Code 10)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Search for Solutions has the answer.

  It is strange because it is power to the player, when I put a disc in I can hear him pull up, but it becomes visible to the machine!

  Pointers would be useful.

  see you soon,
  David

  If a yellow exclamation point appears in the device, close the USB hubs\controller Manager, then a USB driver problem would be possible.
  In most cases, a new installation of USB might help to get rid of this annoying problem of USB.

  -Remove and disconnect all external USB devices that are connected to the laptop.
  -Go to the Device Manager and remove the USB hubs and USB controllers.
  -reboot the machine.

  New OS reboot should reinstall USB drivers, and the operating system should recognize the USB ports again. After this short intervention, connect the external USB CD. DVD player and check if it would show up in my computer

  Good bye

• USB ports no longer works after L7680 OfficeJet Pro printer installed...

  I am running Windows XP Pro SP3.  Before you load the printer all my ports worked (4 on the monitor, 2 on the front of the PC).  Once I'm installing all of them stop working.  The only option is to work with one on the front of the printer.   I am able to get my Western Digital HD to work on the USB port printer, but this one is fickle and only works sometimes (I have to restart to operate when it gives out).  I'm not able to use on the printer port USB flash drives. I f the usb port on the printer does not work, so I have no options.  I tried with a powered hub and it works at all.

  I was chatting with representatives of HP without result. If a HUB on the printer does not work it is a useless tool for me.  I need one that has no readers, etc.  Is this a reason to return to the item under warranty?  Or y at - it a way to get this thing to work.

  HP wants to tell me it's Dell.  Dell says it's HP.  I'm so confused and frustrated.

  What I discovered, after about 3 years, the computers are generally obsolete.  My computer was 1.1 ports and the printer connection 2.0.  As see you all new USB components say they are 2.0, but can work with 1.1.  Long story short, after reading this somewhere, I decided that I had to upgrade my ports.  I went to Microcenter (they have an online store as well) and bought a USB 2.0 PCI Card for $11.00.  At opened her top and broke in the new port and everything works well again.  It may not be what you want to hear, but it was all I could do.  I was told all empty printer resources USB and this is why the upgrade was necessary.  Hope this makes some sense to you.

• Portege R500 USB Extrenal HARD drive question

  Recently, my boss bought a Portege R500 and I installed Win XP SP2.

  Installed all necessary drivers.

  It is, if I connect an external USB HDD's does not detect and I use the laptop after having removed the USB HDD applications hang up and it wont even stop.

  Can someone share a light on this problem?

  Thank you.

  It is not easy to share a lot of light on it. Who is the manufacturer of this external HARD drive? You have a software with this HARD drive that needs to be installed first?

• Satellite P10 - USB port no longer work

  Hello

  I have a huge problem with my computer usb portable-ports(satellite p10).

  After that I tried to connect my hard drive external with my laptop, all of my devices usb is lost. I tried to update all the drivers for the chipset and usb. I even updated my bios, but without success.

  Even other usb devices as my camera and mp3 player not recognized by the computer system. But it seems that the usb port still have power because my mp3 player display a reaction even without battery power.

  I hope that someone knows a solution for this problem.

  Thank you

  Hello

  I don't know, but if the USB port is bad there is also a no power supply possible. In my opinion, the mp3 player shows a reaction because the device detects a connection to the USB port.

  In my opinion, you should contact the Service of your country partner and let check the device. I don t know how old your unit and if the warranty is still valid.

  Good bye

• Portege R500: Slim Port Replicator II - headphones not working not

  Hello

  I have gor Portege R500 with Vista preinstalled Enterprise.
  It's maybe just me in dense (!) but I can't get the headphone jack to work when it is in the Replicator (and the Replicator does not have such a plug).
  The headphone jack works well when it is off the Replicator and the speakers connected it work very well also...

  I have played with the settings in vista and still can't make it work - any ideas?

  m

  Hello

  You must first check the Toshiba drivers for the last sounddrivers download page. Download and check if the problem occurs again. If not, everything is OK, but if not then come back and we'll talk more about your problem.

  Welcome them

• Re: Portege R500 - FN keys no longer works

  Hello

  I have a laptop Portege R500, and suddenly the fn keys stopped working. I looked for off site Web from Toshiba, but no pilots have had no luck and also tried reinstalling the common Modules (I just re-installed, it is necessary to uninstall anything before hand?).

  I use the OS is XP SP2. I tried a system restore and don't really want to do a full system restore.

  Basically, I just want to get them working again.

  Any help would be appreciated and thanks in advance.

  Matt

  Hello

  The common Modules should be resettled in too, but it would also be necessary to reinstall the Hotkey utilities for display devices.

  By the way; You must clean the registry using the free program called CCleaner.
  You can download many Web sites. Google simply

  After use of this applications reinstall the common Modules and the Hotkey utilities for display devices.

  Good bye

• Portege R500 - USB key requires administrative rights

  I have problem with Portege R500, when the user (from the power users group) Insert the new flash memory, XP requires administrative rights. For security reasons I can't give the user administrator rights. I have
  I never have this problem on other portable Toshiba (Tecra A4, S2, M1...) Please help :-)

  What about the case is clear, if the user wan to access the flash memory module inserted that he needs an admin rights

  What you could do is to assign admin rights only for this particular application, which is responsible for flash memory.

  I put t know exactly what applications it is but I guess on these program needs the right admin; Memory card SD, SD memory boot utility, format etc.

  To assign the authorization right right click on the applications and select Properties.
  Here, you have to choose the call of the Security tab.
  Then select the user and allow the full control option.

  Maybe it helps

• Portege R500 - Slim port Replicator II: dual monitor DVI & RGB all

  Is it possible to use a double configuration monitor on a Port Replicator II slim if I connect a DVI-port monitor and the other to the RGB port?
  I have a laptop Toshiba Portege R500.

  TIA

  Hello

  I didn t find all the information about the Advanced Port Replicator II but I found some info on Advanced Port Replicator III and the simultaneous use of RGB & DVI ports

  So the point is it's possible * ONLY * if portable system unit _itself also includes simultaneous use of RGB & DVI support_.

  concerning

• HP a6554f: Front USB Ports not working for a6554f

  Hi, I cleaned the dust from my computer yesterday for the first time because the computer kept crashing. I removed the motherboard, so I unplugged everything that was clinging to her and I also removed the hard drive then plugged everything once I had finished, (do not know if I just plugged in as it was, even if I took a video of it, but the wasen can't good quality so I had to guess a little). I also added thermal compound to the cpu.

  Anyway, everyhting seems to work except the 2 usb ports front of the case. It was working fine until I opened the case (this is why I do not open the computers, but the dust was just too). The audio ports and microphone located in the front work correctly. And the rear USB ports are working properly.

  What I've done so far is running pilot Booster and also I went to Device Manager > USB Bus controllers, then I turned off everything on the list, then allowed them again. And nothing has worked.

  I don't know much about computers so I don't want to go to the hassle of opening the case cause once again I was scared lol but could I maybe hooked up a cable in the port of fake?

  Also, is there a diagram to show where each cable goes to the a6554f model?

  As you pointed out the audio before and MIC ports are working, then it might be just the plug for the ports before USB is not properly or is in the wrong place.  Here is a page that relates to the motherboard. In the lower right corner of the image or the page layout scheme, there are two blocks header before normally taken into USB ports.  Says F_USB1 and F_USB2.  Either we must work to the front ports.  Check to make sure that the wiring box beam (which has the wires going to the front USB ports) is connected on one of them.