Portege R500 works on battery, but after connection to the power supply is OFF

Similar Questions

• Satellite A500 - battery light flashes when connected to the power supply

  Win 7 Satellite A500 PSAM3A-03P00E.

  Battery light flashes when connected to the power supply (intermittent fault), when I disconnect the sector and reconnect the flashing stops and battery (high capacity) continues to receive.

  Also, when battery light blinks the keyboard backlight stays on when it should white and if the backlight is turned off and the battery light starts to blink the keyboard backlight turns on, all other functions seem to work well.

  Charges of battery and the wedges load properly (when the battery flashes).

  Hello

  Have you noticed this problem since the first day of purchase?
  Theoretically, it could be possible that your battery begins to malfunction
  On the other hand, an electrical problem could also be possible

  However, try this:
  Remove the battery and the AC adapter. Then press and hold button power 30 sec long.
  Then insert the battery and plug AC adapter still does that help?

  By the way: this is the BIOS updated? If this isn't the case, perform an update.

• Windows does not load and displays a black screen when it is connected to the power supply

  Original title - Windows Vista running on my laptop Sony VAIO

  Trying to turn on my laptop using the built in battery nothing happens.  When the laptop is connected to the power supply and turned on Windows does not.  It shows something in the sense that it does not properly off.  It tries to load back to a system restore point before the last stop, but seems to fail again during this process.  All that is displayed is a black screen. Currently the power on light is on, the battery light is on, but the drive activity light is off.

  Yet once again, I switched on the laptop and finally the Startup Repair process is automatically called.  After the display of the bar to attempt repairs, the system has been repaired successfully.  As a result, the I ran my Norton anti-virus, followed by Windows Updatesoftware.

• loose connection to the power supply

  I have a HP Pavilion e043cl 15 Notebook PC with name of the model E5K58UA I bought August 2013.  My best friend bought the same brand/model from the same place 2 weeks before me.  We BOTH have had this same problem almost from the beginning.  Speaking for mine... it became worst Crescent until I don't know if it will load OR start the next time I try to turn it on.  I have "glued it" the only way he will now.  It changes almost every day, so I have to move it and the re - paste.  We feel that it was a problem of hardware design for almost that we bought them.  Unfortunately, none of us buy the extended warranty.  It was mainly in the part that we bought at Costco with my Costco AmEx that allow you to add an extra year warranty and apparently are not now. I have done some research and think that it is the connection to the computer.  Can anyone confirm that, and if so, where would you recommend that I buy a replacement?  I don't want to spend a ton of money given these were $399 new.  I am sure that I am able to fix as well.  I also wanted it to go on the record it seems be a VERY common problem which should NOT happen on a laptop this quickly.  None of us carry these computers around with us on a daily or even weekly.  It seems quite ridiculous to deal with this problem already.  I got a DELL computer for 7 years.  I had to replace the entire power cord, but the connection port was never a problem.  This seems put together much cheaper.  I feel HP should replace the port free of charge, just don't expect that this will happen.  A consultant where I can get the spare part required at a reasonable price would be greatly appreciated.  I have confidence in particular a HP original spare part because those original seems not be made good in the first place.  Thank you very much!

  There is no parts but HP parts. The power supply is on a dongle that plugs into the motherboard. They don't directly solder it on the map more.

  It is the repair:

  Manual

  It is the part:

  (13) power connector cable 719859-001

  See Page 92 of the manual. Here is the site where you can order the part:

  https://h20141.www2.HP.com/hpparts/Search_Results.aspx?mscssid=0C83E2FCA183404E92E39A7BB3B9D98B&SearchIn=PartNumber&SearchPN=719859-001

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• SAT L500D does not have to be connected to the power supply until the reboot

  Hi all

  I have a L500D, purchased locally and I have a problem that seems to escape correction by the helpdesk of Toshiba. My laptop while operating on battery comes with messages expected that the battery has x % remaining and suggests I plug the laptop into the power supply. I connect the laptop on the adapter and the power of the taskbar icon indicates the adapter is plugged in but it also shows that it does not load (adapter also remains cold, indicating no power is being developed). Low battery messages continue until the laptop stops ultimately. On commissioning again the laptop acknowledges that she attached to the adapter sector and charges upward.

  Helpdesk from Toshiba said a new BIOS version had been released and that I should update the BIOS and would probably "fix the problem". Went to the Australian Site and there is no other choice to see downloads for this model L500D [product number], helpdesk then took me on the European site where I updated the BIOS, then spent several hours on the phone with Symantec trying to uninstall and reinstall Norton 360, which ceased its activities and could not be uninstalled leaving my laptop not protected.

  Someone at - it an idea of what is the cause and how it might be remedied? Appreciate your thoughts.

  Hello

  If you have updated the BIOS and the help of t n right?
  Hmm I think that this problem of card mother s that looks like the adapter does not work correctly because everything is ok after new reboot
  I think the laptop is under warranty and you should get in touch with a local ASP to discover exactly what s wrong

  But I think that it s motherboard related question

• Satellite L750 slows after plugging in the power supply

  Hello everyone

  It's almost a year since I have TOSHIBA L750-12 model q PSK2YE-05P00RPL.
  Since the beginning, I noticed strange shares: when the battery becomes low at 10% and I plug the power supply everything starts to work slowly (for example I can see frames when using the webcam)
  also, web sites load very slowly or not at all. It's doing my work on laptop almost impossible.
  When this problem occurs, there are a few bugs in Event Viewer:

  Event 37, kernel-processor-Power
  "The speed of the CPU 0 in group 0 is restricted by the system firmware. The processor is in this state of reduced performance for 71 seconds since the last report. »

  I thought it was the power supply problem or motherboard to power so I sent the laptop to the service. Technical support only changed the BIOS to version 3.60 [there is not an another atm version] and he has not solved anything.
  I searched the internet and I found that this failure can occur because of the Enhanced Intel SpeedStep Technology option, but unfortunately I can not disable it in the BIOS.

  I read that there was problem simillar with for example Portege R835-P84 and new BIOS helped and solved this.

  Please help :(

  PS Sorry for my English.

  I also imagine that new and modified BIOS can help with this, but if Toshiba doesn't offer it there is nothing you can do, especially with the SpeedStep technology options.

  Maybe stupid question now, but when you connect the battery change the plan power high performance is a laptop s performance difference?

• Re: Satellite P850 full face feels 'sparkling' when it is connected to the power supply

  Hello

  I recently bought a P850 138.
  Whenever the power supply is connected and turned on the laptop case computer feels strange to the touch, and if you move your hand through it, as you often eventually do during the strike, etc., you get this weird 'static' y feeling.

  When you are disconnected from the power grid the sensation continues for a short while, but soon after the case feels just like normal metal again.

  I guess that something happens which is originally the case become statically charged, but does anyone have any ideas as to why what is happening? Is this a common problem?

  Any ideas?

  Thank you very much in advance for your answers

  Hi neh23

  It's the first time I read on this subject and in my opinion its definitely not a portable common behavior I think you should get in touch with a Toshiba service provider in your country to check the laptop.

• Try to connect to the power supply via the IP address

  Hello

  I am trying to connect to a power supply of Sorensen XEL60 - 1.5 P. I have its IP address and port number, but I'm stuck on an error 63, cited at the end I tried the advice in this forum and online without success, including:

  Disabling firewall

  * the ip address ping command

  * Tools > options > VI Server

  http://digital.NI.com/public.nsf/allkb/6ccced1045c479d286256a3a00655123

  Open all the ports LV wants

  Nothing improves the situation. What I will try?

  Thank you very much

  

  Error 63:

  LabVIEW: Serial Port receive buffer overflow.
  =========================
  LabVIEW: The network connection was refused by the server. For TCP/IP, make sure that the server is running and listening on the port you want to use. Firewalls can also cause a server to refuse a connection. To VI Server, make sure that you have enabled the server from VI tools > Options > VI Server.

  No reason to be a donkey to people asking for advice. I tried UKRAINE by the boards, conscientiously the profit and loss account.

  I can actually get the power supply to operate on the VISA. It needed fixed two bugs, in the case where others are interested:

  * Setting VI_ATTR-TERMCHAR_EN to VI_TRUE

  * Creation of the resource VISA under the 'manual entry of the raw socket"rather than one of the other two. This is necessary because I'm trying to communicate via a specified port.

  So I'm fine now, I just can't pass strings directly via IP and port that I thought I should. It may be a device-specific problem, but I'm always interested in other thoughts.

  Thank you

  Warren Harding

• My battery icon is flashing blue to Orange quickly even if the computer is connected to the power supply

  Battery problem

  Dear friends,

  My battery icon is flashing blue to Orange quickly even if the computer is connected to Power.What mean?

  This means that my battery is dead and not load? If Yes... will be the work of the computer until I repalce the battery? And is it safe to use the computer in this mode?

  Hello

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

• Shift of the computer; It seems that my laptop is lagging when it is connected to the power supply (AC adapter) and it works perfectly fine when it is NOT connected to the power adapter. Can someone help or diagnose the problem?

  This shift of computer thing had never happened before until about a week ago. The shift comes every 30 seconds or more and it occurs also when I switch between applications.

  Hello

  I saw this kinds of problems occur with the power strips and even UPS systems. And some similar questions have
  been solved using them actually, especially the UPS. If the power strip has important circuit protection
  He'll probably bad or you have very low power at first on this AC circuit.

  Solution is not to use the tape and maybe get a UPS with brown-out solution.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• iPhone 5 sec. turns off immediately when it is connected to the power supply or the computer.

  I hope someone can help me with this. I couldn't find anyone with a similar problem.

  My iPhone 5s stops at random times and stop immediately when I plugged it to either power or a computer.

  He ran hot enough (can be felt in the back) and the battery doesn't last long at all.

  He is now in recovery mode after a few attempts of setting (plug on the iTunes screen).

  But it stops as soon as I connect and show no signs of life until I unplug the unit.

  IOS running 9.

  Take a look at this article, it may help you http://osxdaily.com/2014/06/09/iphone-randomly-shuts-off-fix/

• Satellite A200 - touchpad random movement when it is connected to the power supply

  Hello
  When connected to power and press the pointer jumps on erratic (only by pressing the key) even if I hold my finger again.

  BUT if I keep in touch with what it is connected to computer laptop 'ground' such as the VGA connector then everything works correctly.

  Also if the laptop is sitting on my lap this also fixes the problem (I have experimented by placing it on a wet towel to simulate the protective effect of my body and it had the same effect, i.e. no pointer to nervousness).

  Finally when executing a stack, there is no problem.

  I tried implementing level and retirement of pilots and all sorts of permutations in the settings so I don't know it's a material thing. Disassemble the system to look at the connections of touch pad but nothing stood out.

  Does this problem familiar to someone or do you have ideas what tests I could do to identify the problem more away?

  Thank you
  Shane

  Thanks for the comment man!

• Background noise when connected to the power supply current

  I recently bought a laptop series Equium A100 and am generally very happy with it however I noticed that there is sometimes a background noise through the speakers (crackles and whistles) - this happens only when the AC adapter is connected does not when running off the battery voltage. The noise is present in the onboard speakers and if connected headphones/external speakers. It's definitely coming through the speakers/headphones not the mechanical parts of the laptop or the battery itself.

  I see that others have had a similar problem also but no solution seemed to be posted. I was wondering if someone has solved this problem yet?

  Thank you very much.

  Hello

  It's very strange. I have the Satellite A100 (Vista laptop) and I don't have this problem. Satellite and A100 are portable similar and there is not much difference.

  Your laptop comes with Windows XP Home or Vista edition? Have you tried to update BIOS. It's a really stupid question and I think that whistle is quite annoying for you.

  Have you also tried to contact service? What they say about this?

• I have a MacBook Pro 13 inch early 2015 and when I connect to the power supply the connected is loose and my Mac does not load. Please help me

  MMacBook does not load

  Looks like you have is connected wrong charger (you have an older Mac in the House?) or the charger has been damaged. Perhaps the magnetic head is damaged.

  You have another mac or a friend with a mac that has the same charger if you can try that?

  You can certainly buy replacement chargers, but I recommend that ensure you it is the charger that is the first problem to avoid spending money. If this is a problem with the port on the Mac, then a replacement charger will not help.

  If you don't have a 2nd charger to test, you can take your Mac at the Apple Store or your local electronics store that sells Macs and ask to try the plug one of their display models.

• Pavilion dv6t-7000: Pavilion dv6 crash when connected to the power supply

  HP Pavilion dv6t-7000 CTO Quad Edition Entertainment Notebook PC

  I suggest to download and run the free version of WhoCrashed? to find out if the problem is hardware or software partner.

  See the following URL for a download link.

  http://www.resplendence.com/WhoCrashed