Portege R600-10 q Finger Print Utility not recognizing not print

I have a laptop Portege R600-10 q, which has been upgraded to run Windows 7 Professional (32 bit) using the provided upgrade drives Toshiba.

Recently the digitization of finger printing became unreliable so I followed my usual practice and removed the old fingerprints and undertook a new analysis of my fingers.

I find that there are three required scans for each finger. When I scan the first two times the impression is immediately recognized and rated 'good '. However, the third attempt always fails and will scan up to 8 times, and then the treatment is finished. This happens, regardless, whose finger is involved, the computer restarts, run the utility as an administrator etc.

I uninstalled the utility of fingerprinting and reinstalled, but the same problem persists.

I would be the value of suggestions to get the fingerprint utility, works again.

Andrew

> I uninstalled the utility of fingerprinting and reinstalled, but the same problem persists.
Did you use the most recent finger printing software?
Please do.

Please try the software of fingerprints for Portege R700.
New version that came out for Win 7 32 bit and 64 bit OS

PS; You must remove all fingerprints before installing the new version...

Good bye

Tags: Toshiba

Similar Questions

  • Portege R600 - display problem device change Utility

    We started to use computers laptop Toshiba Portege R600 series on my place of work. All laptops are home in a Toshiba Slim Port Replicator II. Laptops are all running a version of Windows XP Professional with Service Pack 2 applied (and of course a few customization business).

    The problem is with the display on the external monitor. The laptop starts according to the normal and connects to the fine. The Fn + F5 key and so we can switch between the external LCD screen and the laptop monitor. We can also extend the desktop on the external monitor without problem.

    The problem occurs when the laptop is not docked since the Replicator. After having similar problems with R500 series laptops, Toshiba following applications have been installed:

    (1) common modules (version 6.06.01)
    (2) controls Toshiba (version 3.31.3800)
    (3) button ON / OFF (version 2.5.1.0_IS115)
    (4) Toshiba utility (version 4.30.18)
    (5) Toshiba screen device change Utility (version 2.5.0.0)
    (6) Toshiba Hotkey utility for display device (version 3.4.5.5)
    (7) Toshiba Mobile extension 3 for XP (version 3.87.00)

    We now have the following symptoms:

    (1) detach, the "gear" icon appears and then the error "TOSHIBA Display Device change Utility is not installed correctly. Please install TOSHIBA screen utility unit of change. "
    (2) for the mooring of the laptop again, we get the "home" icon, and then the same error.
    (3) after that, the external monitor does not become active once again, until what you press Fn + F5.

    I have tried uninstalling / reinstalling the TOSHIBA screen device change utility. Have tried to remove the Mobile Extensions and install the software, tried a number of different things to make it work. Rebuilt 1 stop working and everything was installed in the order above without success. In fact, noted that during the installation of the TOSHIBA utility screen device Change the Setup screen starts and runs, but the window does not uninstall.

    This seems to be a driver problem with those from Toshiba, but I'm not sure. Someone at - it suggestions regarding this? The drivers that I use are on the site of Toshiba Australia (even if they are the same drivers found on the main website of Toshiba). The link below.

    http://www.ISD.Toshiba.com.au/71/live.dll/topic/content/driver_search_list.jsp?BV_SessionID=@@@1187200925 .1241154604@@@&BV_EngineID=ccccadeglfeghejcefecek fdffhdfgh.0 & theAction = true & CATOID =-15058 & MODE = NPRO & ProductMenu_0 = Notebooks & ProductMen u_1 = Portege & ProductMenu_2 = 1509603 & x = 22 & y = 7

    Post edited by: Will-SOE

    We have tried this on a couple of machines that are the same exact specifications. The model that is sold in Australia is a Portege R600, model PPR61A.

  • Portege R600-10 q - SD cards does not always work

    Hello

    I have a r600, but there seems to be a problem with an sd card,

    2 GB SD cards bed perfectly, but if I put a 16 GB SDHC sometimes read, sometimes not...

    When I put the 16 GB sdhc and the pc recognize, if I try to paste a folder of movie with 4 GB, it pops up an error message saying something about «error semaphoro...» »

    Anyone know what this means?

    Thank you

    The Portege R600 supports up to 2 GB SD cards and SDHC cards up to 16 GB.
    So it should work, but have you tried to format the cards with the Toshiba SD card utility?

    Last but not least try to update the driver for the card reader that you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • Portege R600 - Windows 7 switch backlight does not

    I have a new Portege R600, comes with Windows 7 32 bit and the switch on / off for the backlight does not work.
    I installed the new VFR package, until I uninstalled the old. Also the latest version of the Bios.

    Use the support Toshiba button and placed in the file backlight.exe, still does not work. If I tap the backlight.exe file manually, it works.
    It is not a problem of material, as told in the hard drive of my old R600 with XP Professional and works of button.

    What can I do?
    Toshiba support is not able to help, to talk about the new facility, but is the original unchanged.
    Maybe in the button holder, I put in an option in the empty file?

    > Switch on / off the backlight does not work.
    AFAIK some BIOS versions contains the additional option to enable and disable the lighting.
    Please check if the lighting is not disabled in the BIOS.

    I also searched this forum for some tips and found this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=127192

    Check it!

  • Portege R600: SIM inserted but error: "device not found".

    Hello

    Portege R600 under XP.
    Put a SIM card in the slot, but I get the error above: Wireless Manager Toshiba "device not found".

    Cannot find the configuration options or anything like that in the manual.
    Can someone point me in the direction of literature?

    Thank you very much!

    Evan

    Hello

    Here you can download the latest version of 3G driver and tool:
    http://APS2.toshiba-tro.de/WLAN/?page=3gdownloads

    Here you will find a knowledge base on the topic of G 3:
    http://APS2.toshiba-tro.de/WLAN/?page=3ghowto

    and here you can find a HowTo create + how to create a Dial-Up connection with 3 +.
    http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

    Hope this helps

  • Portege R600 of fingerprint problem: error: could not open the specified database

    Hello

    I am trying to give the registration of fingerprints for my Toshiba Portege R600-101 and I get the above error.
    I tried also on windows XP and Vista.

    Has anyone with the same problem or anyone suggesting a solution?

    I uninstalled the truesuite Access Manager but still the same problem.

    See you soon.

    Hello

    I noticed a new update for software fingerprinting for protected R600.
    Remove the old application of fingerprints, restart the laptop, clean the registry and the system using a 3rd party too (CCLeaner is free and not bad).
    Then reboot again.

    Download the fingerprint on the page of the European driver Toshiba Software and install again.

    Check it out!

  • Portege R600-10 q - DVD drive open / not work after the start of Vista

    Hi all

    Its my first post here =). I just bought a new Portege R600-10 q (PPR61E) and I have a problem. The DVD player does not open / works after Vista started... it works very well, or at least opens / orange light turned on, before the page of connection, but after that nothing.

    I have done't the thing of high-low values regedit to see if it works, but still nothing.

    The device does not appear in Device Manager, so I can't remove and reinstall.
    I did all possible updates to toshiba and MS, nothing helps.

    Can someone point me in the right direction?

    Thanks in advance.

    Steve

    Hello Steve

    I don't know what you've done in the past, but I would like to know if everything works with the factory settings.
    Have you tried to install Vista using Toshiba recovery image?

  • Portege R700 Finger Print Reader suddenly not recognized OS

    Hello

    I've been looking for a solution

    My R700 on Win7 worked perfectly using the finger print scanner. At any given time without cause the
    hardware (fingerprint reader to log on) was not recognized by the operating system more.

    -J' tried to remove the software, reinstalled driver
    -updated it and so on resulting material was not found.
    -J' even deleted all the entries in the register - no go.

    -Finger Print genuine software starts, but only to give an error that the FP-reader is not present.

    Is there a way to remove the fingerprint stored manually by removing the manually.

    The equipment works according to the support. (The machine has been send)
    However I don't want to re-setup of the entire machine (it is a work laptop) just to make it work?

    Intro step by step to achieve this or advice?

    I couldn't find a description on how to manually remove fingerprints (cause I suspect this is the problem) from the software to do this does not start.

    Any input would be appreciated.

    Best regards
    Julian

    If you do not see material unresolved fingerprints or devices in Device Manager, then the device is either disabled in the BIOS or the fingerprint sensor is defective or too loose or there is a spill of liquid causing corrosion.

  • Portege R600-13Z - Toshiba utility SMS - slow / stop when the SIM is in!

    Hello

    Portege R600-13Z running XP Pro.

    Recently updated the firmware and the Wireless Manager to try to get 3g / GPRS comms to work at all. Updated worked a treat and have now great comms.

    Utility of SMS does not work too well if. Very, very slow or crashes.

    Wierdness: out the SIM card to use the phone to send a few texts and with the SIM on SMS utility works very well (!) starts, allows composition, everything except the real /sending/ of the text, which is of course not possible because the SIM card is somewhere else.

    Anyone encountered this problem, and is there a solution?

    Thank you very much

    Evan

    null

    > took out the SIM card to use the phone to send a few texts and with the card SIM SMS utility works great
    If you noticed delays in using DMD utility only with the inserted SIM card?

    Hmm I m not very well why this happens, but I know it s not recommended to insert the SIM card if the system is already running.
    You must shut down the laptop, must insert the SIM card and then you should power the device in place.
    Then you could test this once more.

  • Finger print lock expected needs for Notes

    Dear team,

    I'm red Amal of the India, using iPhone 6 more since last year 1. I'm usually store my emergency and important details in the notes, but it is not permanently attached, so I ask you to provide the notes finger print lock in the next update.

    Your faithfully

  • Portege R600-12Z long delay of start & does not recognize DVD dirve

    I have been using my Portege R600 running windows XP for about 14 months now and recently FOUND that he began to take 1 to 2 minute wait before starting the sequence start or resumption after hibernation. Now, I have discovered that the DVD drive (5100 DVD - RW supermulti drive) does not work: in the Device Manager it shows as unable to start; If I try to boot from the drive of CD/DVD (F8 at first upward, or the definition of the boot priority) it does not take into account the CD and eventually get to the start of the HARD drive in any case. At the same time, the reader is actually superimposed a disc (it will open and close and will try to read any disc inserted). I've updated the bios (3.20) and all the drivers concerned I can find (although none seems to be specific for this drive). Any suggestions would be greatly appreciated.

    I should also mention that this replaced R600 actually an another R600 (one of the earlier and more fragile versions) on which I had exactly the same problem after about 10 months. I just unluckly, or is this a weakness of the R600 line?

    PMR thanks for your comments.

  • FN + F5 to change device display does not work on Portege R600

    Portege R600-11 b Win 7 ultimate
    I wanted to show my photos on the TV using the vga output. Connected everyting, pressed FN + F5 and watch LCD dialog box. Support again, still lcd. tried the keys of direction, no joy, still lcd.

    plugged my trusty R100 instead of the R600 and bingo, works very well

    I'm sure this used to work on the R600 90%. (Actually, what I remember is that it just worked first time with no keyboard at all operations).

    Someone suggest anything happy?

    Steve

    It seems that your TV is not recognized correctly.
    Did you use FN + F5 option in the past?
    Are you using the original pre-installed OS that you got with your laptop Portege?

  • Portege R600-101 connects to the WLan but not to the Draft N

    Hi friends...

    I have a Portege R600-101 which is capable of 802.11b/g/n.
    I have now, I tried 2 routers (belkin and Netgear DG834N) to get connected to the speed n machine but no joy... any help greatly appreciated...

    See you soon
    Warren

    Hello!

    Can you connect to the router with the b/g project?

    Maybe the router or laptop computers is not set to the project in order to check the settings in the router and wireless network card.
    In addition, you must disable security as hidden SSID, MAC address filtering and so distant features.

    Good bye

  • Finger print reader does not work after upgrade to Windows 8 Pro - DM4 2055BR

    I updated my previous Windows 7 to Windows 8 Pro Edition and the Finger Print Reader no longer works. Validity software driver is already installed more simple pass, but when I run the Easy Pass it pops up the message "the drive is not connected, connect the drive.

    I noticed one lot of other posts related to the same issue, but I don't know if the model of my laptop does not support the new version of the operating system.

    I appreciate if someone could help me with this problem.

    Dulao35,

    Welcome to the HP Forum!

    When start you / see: Easy going on?

    You may be running HP SimplePass Version 8.0.0.57 or some other SimplePass 8.x?

    ======================================================================================

    You can run HP SimplePass Version 6.x later on your computer.  You may also be able to get SimplePass version 8.x if you want to stay with this version to work.  It's a personal choice, really - either version should be able to work on Windows 8 Pro.

    Note that the version 8.x SimplePass seems to dislike everyone, but the Internet Explorer browser. This is a personal observation and NOT what can known by other users.  If you use IE, then the point is moot.

    You can probably keep your existing driver of the fingerprint (Validity Sensor in the Device Manager) as long you run the version compatible with Windows 8, illustrated to the webpage of your computer driver:

    HP Pavilion dm4-2055br Entertainment Notebook PC Drivers

    See below for a method that you can use to upgrade HP SimplePass:

    Simple Instructions for upgrade HP SimplePass

    The bits on SimplePass version 8.x are towards the bottom of the file.

    Click on the star of congratulations !

    It's a nice way of saying 'Thank you' for help.

    Although I strive to reflect best practices of HP, I do not work for HP.

  • finger print scanner not working not

    I have a m6 evny. The strange thing is my scanner finger print does not work on the lock screen, but when I log in using the password, it will work then. Anyone know what is happening?

    FN + ECS should give you information about the product.

Maybe you are looking for