Portege R600-11b - screen is very low

Similar Questions

• Portege R600-11b - cannot install Adobe Acrobat 9 - ActiveX problem

  I recently bought a Portege R600-11b and have tried to install Adobe Acrobat 9 on it by downloading it from the Adobe site.
  I spent many fruitless hours talk to Adobe to try to solve this problem.

  They concluded that my laptop is not compatible with the software.
  This isn't the case, that this laptop exceeds the specification of systems required in all aspects.

  The problem seems to be that it won't work ActiveX even after all the firewalls and anti-virus in disabled - I don't know hardly what to do - anyone has any suggestions please?

  > They concluded that my laptop is not compatible with the software.
  That s just absurd

  The Adobe Acrobat Reader software is a small application and can be installed on almost all computers and systems so that s certainly not a reason why you are not able to install this software.

  If this problem is related to the ActiveX, then you can change this in the settings of your internet browser.
  For example, using the IE7 you could modify this here:
  Tools-> Internet Options-> areas-> {}-> ActiveX controls and plug - ins area-> allow unused ActiveX controls to run without prompt

  You can also try to clean the operating system and the registry because the problem might be related to faulty registry entries.
  To do this, I would recommend using the free CCleaner tool.

  Finally and above all it s always advisable to consult the homepage of support from software manufacturers. Here you will find some documents on installation with the Adobe Acrobat Reader software problems.
  http://www.Adobe.com/support/reader/

  Check it out!

• Equium A60-181 screen is very low after reconnection of cable

  My satellite had been very slow lately and I was advised to remove the base and clean the dust fan (I'm quite a novice).

  When I replaced the screw, the screen would not work, but all the power lights were on. I reopened the base and found that a wire was disconnected and rested there. After that, the screen went very dark.

  Any ideas what it could be?

  Any help appreciated.

  Hello

  Uh, I think that it s is probably not a good idea to screw on your machine without having experience with mobile systems.

  Thus, for your problem, try to reconnect the cable but correctly. In the case of no success, it would be useful to bring your machine to a technician or at least to an authorized service partner to check your machine/connections. Maybe they can find the error.

  Welcome them

• Tecra R850 - screen is very low

  My screen died last year just lost brightness. I replaced it with a new one, but still no light. If I hold the right way to the light, I can see the very small screen. What could be the problem?

  PT525A-004019 - TOSHIBA TECRA COMPUTER R850

  I can't say for sure, but I think that there is a problem with 'background' - FL inverter.

• The screen of very low brightness after a new installation of LED panels

  I recently changed my screen was cracked and paid for it as physical damage are not covered by the warranty of my SVE15136CN. A few days later, the new screen developed a black spot on the left which has increased significantly every day. So I gave him in the center of service again. The service man now says he has changed the screen, but that's a new problem. After the first start, the screen works normally. After a few hours, the brightness is extremely low and not back to normal even after handeling options brightness and power through windows or change the graphics driver. Nor did the change in brightness after plugging in the charger, as it shud be ideally. After three weeks, he suggests that my screen cable is defective not allowing not my screen to win enough power (then how to get enough power to start?) or even the motherboard needs to be repaired for damage. (how it works for the first start?). I feel that something is fishy in this regard. Tell me if it is possible everything that happens? How shud I proceed?

  Hi mihirvd,

  Thank you for considering the Sony community!

  We are sorry to hear the problem you're having with your computer. Another moderator has already answered your question on this thread: VPCEE31FX starts and runs for a while and then the screen turns white can anyone help please

  It's already a hardware problem and we cannot proceed with troubleshooting. We strongly suggest to ensure coordination with the Sony Service Centre. They know the process and they are well informed on how to repair your device.

  For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest your place of residence in the Asia-Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• I get a pop up screen I need, but the screen is very low and does not allow more than 1 line of information while IE shows the window contextual integers of 27 lines

  I play games that allows me to send gifts to your facebook friends and when I click on send gift, a screen with the names of my friends will be displayed so that I can select the ones to send to... but since yesterday morning, the pop up screen using firefox became so weak that it allows only one line and it does not allow me scroll more than 5 times... While the IE pop-up window shows 27 lines at once, and I can scroll the following 27 and so on... I have pictures of the screen if you need...

  You should be able to resize the window pop - up to enlarge.

  You allow sites resize the popup window?

• Portege R600-11b & Vista 64 - bit recovery DVD

  Hello

  Is there a way I can get a version of Vista business 64-bit for my laptop from Toshiba?

  Hello

  If you want to order original Toshiba recovery media you can do so under the https://backupmedia.toshiba.eu/landing.aspx
  Visit this page and check if Vista 64 - bit recovery is offered for your Portege or not.

• After you run a Microsoft FixIt, everything on the screen became very low.

  Microsoft fix it messed up display - I have a monitor CRT - how to fix?

  Please help - the microsoft fix it reset my display settings.  At first, I didn't click that I got the CRT monitor then it sets the parameters as if I did not.  I can't see the screen like this.  It is too small.  Help!

  Hello

  Microsoft Fix it have you trying to run?

  Method 1:

  I suggest you to return the item and try to set the resolution of the screen and check if it helps:

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  See also:

  Common tasks

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_ct.mspx?mfr=true

  Method 2:

  See the article and check if that helps:

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• Re: Portege R600 - port replicator is compatible with regional products?

  Community of greetings from Toshiba,

  I need to buy laptops for several employees who are moving between the United States, the United Kingdom and the Middle East.
  The Portege R600 exist in all 3 markets, but each has a slightly different part number.

  The part number Replicator of compatible Port to the R600 is difference to the United Kingdom, the United States and the Middle East.
  Users would be able to dock their laptops in one of the 3 offices, because they travel extensively between each country.

  What's the Slim Port Replicator II (PA3603U-1PRP) and Slim Port Replicator III (PA3681E-1PRP) compatible with each of the products of the soil of Portege R600?

  United Kingdom Replicator of ports Slim Portege R600-11B (PPR61E-01G00CEN) III (PA3681E-1PRP)
  Middle East Replicator of ports Slim Portege R600-10 b (PPR61E-00F00MAR) 2 (PA3603E-1PRP)
  USA, Portege R600-S4201 PPR60U - 01700C Slim Port Replicator II (PA3603U-1PRP)

  Someone has an experience buy Toshiba products in the Middle East? Or needed to use Docking Stations in offices in several countries?

  Thanks in advance,
  Ted

  (I posted a similar request in the Forum we and receives no answer - http://laptopforums.toshiba.com/t5/Port%C3%A9g%C3%A9-Laptops/Port%C3%A9g%C3%A9-R600-US-UK-Middle-East/m-p/32060#M489)

  Post edited by: TedRNelson

  Hello

  I think that it shouldn't be a problem with the different Portege R600 in combination with the Slim Port Replicator 3.

  Portege R600-11b, R600-10 b belongs to the same series (PPR61E), that the R600 US belongs to the PPR60U, but this should t be a problem.

  As far as I know the different R600 from different regions are not really different (some belongs to the same series) as far as I know there could be a difference between some pre-installed applications and some modules as for example the card wireless network, but this should not affect the use of Slim Port Replicator 3.

  Cheers mate

• Portege R600-13Z: need screen part number - UK suppliers?

  Portege R600-13Z
  Need to buy a new screen - suppliers in the United Kingdom or a reference number needed?

  Thank you very much

  Hello

  I put t know the part number, but as far as I know that you need a * 12.1 WXGA (1280 x 800) widescreen mast *.
  Generally any Widescreen Matte 12.1 WXGA (1280 x 800) should be compatible with Portege R600.

  But if you want, you can get in touch with a local ASP from Toshiba and could order such screen from guys

  Here you a discovery of a data base with all FSA worldwide:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck

• Portege A200: Very low transfer wireless speed

  I have a router broadband wireless-B (brand linksys, model BEFW11S4 v4.0) and have problems connecting to it with the antenna WiFi integrated on my Portege A200. The connection is weak, with a very low speed (like a modem) transfer and also quite erratic, often dropping.

  It doesn't seem to be anything wrong with the antenna itself, as it has worked well elsewhere. The router also seems to be fine - in fact, I have a capable of achieving a good connection to it from my computer if I use a second antenna for a card PCMCIA Wireless-B.

  Can someone give me a clue as to what can happen? Y at - it a setting I should change, or is it possible that there is a mismatch between the laptop and the router?

  Thank you

  Hello

  Well, I guess for download and reinstall the latest WLan driver on the Toshiba site. This could help to solve this problem.

  Best regards

• M40-285: very low contrast on the screen

  Hello;

  I have a new M40-285, and I found the screen with very little contrast. It always happens, even in the BIOS screen.

  On the lower side of the window, there is always a Flash of light, the background is never 'black', more like a gray.

  I got a M30X and the screen was crisp and Nice. That was the reason on the purchase of an M40.

  The laptop is brand new, I ask for a replacement, or something usual in this model? As I said, M30X screen was wonderful!

  Best regards.

  Hi Fran

  Satellite M40 is well-known for me because one of my friends has a. I can't really understand what exactly is going on with your laptop but try it please use the FN + F7 key combination to set the brightness of the screen up.

  If you are not satisfied, please contact your local dealer and check with him. M40 is a very nice unit with a fantastic design and I believe that there is no hardware problem, just a few bad display setting.

  Good bye

• I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  Sorry to hear that, but the screen is bad and must be replaced!

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• The very low vertical lines are coming up on the screen in 4 or 5 places on my KDL-65HX925

  The very low vertical lines are coming up on the screen in 4 or 5 places on my KDL-65HX925. Sony India assistance team is subscript, but to change the Panel also did not help.

  Now the expensive game is with the service center for over a week and they refuse to return the whole and execution of R & D with no idea. In India, it is better not to go for the set bonus from Sony because they are not able to provide support.

  But people do you have any idea what is the cause?

  I'm sorry to hear what is happening with your TV. Only a technician can diagnose what's wrong with your TV. Unfortunately, we are unable to help customers outside the United States. I suggest that get you in touch with Sony India help on this issue.