Portege R600 cannot detect Toshiba Slim Port Replicator II PA3603U-1PRP

Similar Questions

• Portege A600-133 - Slim Port Replicator III does not entirely

  Hello...

  I just got a Slim Port Replicator III (model PA3681E-2PRP) and annexed a number of devices (a VGA monitor, a USB keyboard and a USB mouse), according to the user manual.

  The unit, however, does well with my laptop (a Portege A600-133). Specifically, the laptop battery does not, the devices are not recognized and docking led remains off. However, the laptop turns on and off of the port replicator power switch, and the ethernet port also works very well.

  Clues?

  Thank you!

  Dimitris

  Hello
  I also had problems with the Portege A600 and Slim Port Replikator, when I just connect, works all good! Maybe it's too you, when you try to connect to the port Slim R. you: with your hands the laptop with Slim Port R. extra press together in the Air about where the connector is, one when she makes "Clack" and then a right is connected!
  Sorry for my English

• Portege 3480CT - DVD player in those Port Replicator errors

  I have a Toshiba Portege 3480CT with an external media Port Replicator.
  The MPR has a DVD player, but I can't get the laptop to recognize DVD.
  He can see and read CDs, but I get the following error when I try to watch a DVD.
  "ASPI for Windows is not available...
  Only 32 bits supported CD rom drive... »
  The MPR recognizes that the drive is there.
  Laptop is running Windows XP SP2
  Have the BIOS update update and installed all the drivers Toshiba known.
  Can anyone help? Thank you.

  Hello

  In my opinion you need driver ASPI Google everywhere. Maybe you will find the solution for your problem. You can start with this one http://www.ncf.carleton.ca/~aa571/aspi.htm

• Portege R500 - Slim port Replicator II: dual monitor DVI & RGB all

  Is it possible to use a double configuration monitor on a Port Replicator II slim if I connect a DVI-port monitor and the other to the RGB port?
  I have a laptop Toshiba Portege R500.

  TIA

  Hello

  I didn t find all the information about the Advanced Port Replicator II but I found some info on Advanced Port Replicator III and the simultaneous use of RGB & DVI ports

  So the point is it's possible * ONLY * if portable system unit _itself also includes simultaneous use of RGB & DVI support_.

  concerning

• Portege M750 on plu III Advanced Port Replicator

  The Portege M750 works on Advanced Port Replicator III more (PA3474E-1PRP)?

  Hello

  I discovered that the Express II port replicator is compatible with the Portege M750.

  I searched a bit on google and found this link to an Advanced Port Replicator III over the datasheet. But it s only in German.
  http://www2.inmac.de/inmac_assets/PDF/German/e569412_datasheet.PDF

  However, the M750 Poretge is not listed as a unit compatible and taken in charge.
  So I guess that more Advanced Port Replicator III cannot be used with protected M750 toghterer

  Welcome them

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye

• Portege R500 - anyone using the DVI Port Replicator II on WIndows 7 Beta?

  Hello
  I'm using the beta version of WIndows 7 on my R500 and runnig it's just well except the DVI Port (on the Port Replicator II Slim).
  I have installed this software Fingreprint, battery bluetooth (which are recommended as a solution by the Action Center) and the 'TOSHIBA value added together"which adds the management software of power supply, control over the 2 hardware buttons and gives the FN menu to the screen to control the functions FN1-9.
  I think I can say it's definatively a driver problem, because if I start the R500, the windows loading screen appears on my screen, but when he switches to the desktop, the external screen turns off and the desktop on the screen of the laptop. Also, no chance to activate via FN + F5.
  I tried with the driver Windows 7 buildin, the latest driver from intel (15.8.3) and the vista driver provided by toshiba (7.14.10.1244), but none of them work: (unlucky
  BTW: the vga output works, but only UNdocked :(
  Does anyone have a solution or a tip what to do or try?

  Hello!

  First of all, I have to say that Windows 7 Beta is as its name the indicates that a beta so there might be some problems and it s not sure that everything works fine with Windows 7 Beta.

  Your problem: you see the second monitor in the display settings? There you can active it and mark the option extend my Windows desktop on this monitor.

  Lastly but not the least you should do an update of the BIOS if you have n t the latest version.

  Good bye

• Portege R600 - cannot create recovery DVDs

  Hello! I just bought Toshiba Portege R600-146 and attempted to create a DVD with the system recovery but DVD drive does not recognize DVD discs and fails the diagnostic test PC CD/DVD Toshiba. I can't even create a backup of the system.

  Is it a software fault (Mat * a DVD - RAM UJ - 844 S USB Device drivers or compatibility with Windows 7) or the material, and how can this be resolved?

  Hi Dmitry_3,

  Have you already checked if the CD/DVD drive is properly recognized in Device Manager or it appears with a yellow exclamation point?

  In this case, it might help remove upper and lower filters:
  + 1) run Regedit (start-> Run-> Regedit).
  + 2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318} +.
  + 3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters". +
  + 4) reboot. +

• Portege M200: big screen via the port replicator

  I have a Portege M200 with APR III. I realized that the DVI Jack does not work with it, even if for some reason any, even though they are not supposed to all other ports don't. EACH of them!

  What I'm asking today is how the hell can I get the laptop out on the big screen through the APR? I tried everything, it has the chipset nVidia go 5200 FX (which is able to output DVI according to nVidia)

  I just got a Philips 20 "widescreen TFT and got tired of watching her in the stretched standard resolutions.

  One of my friends has also Tosh lappy, but it's a Tecra 9100, which will be released on the big screen without any questions whatever it is standard, it appears as an option in the Billboard settins. In addition, nVidia say that this chipset is capable of custom resolutions, but I can't find it in the updated anywhere driver.

  Can anyone help?

  Hello

  Well the Tecra9100 is not a Portege M200. Are completely different books.
  The M200 protected does not support these interfaces.
  This is a technical limitation, that the port of mouse PS/2 keyboard PS/2 port, serial port, I Link (Firewire) port and DVI port
  will be not supported on the Advanced Port Replicator III, if a protected M200 is moored.

  The following ports are supported and can be used:
  Line-in Jack, taken Line-out, USB port, port external monitor, parallel port, taken Modem, LAN jack, DC IN 15V, housing for security lock, locking the computer.
  In the documentation for the Advanced Port Replicator III is a 'fact sheet for III Advanced Port Replicator"sheet where this limitation is descripted.

• What is the resolution of the max screen with speed Port Replicator Hi (PA3838E-1PRP)

  Hello

  I have a Toshiba Portege R700 - 11 p and I want to buy a duplicator of Port speed Hi (PA3838E-1PRP), but I want to know the maximum screen resolution with ang VGA HDMI on the port replicator.

  Thanks in advance for your answer

  Hello

  The maximum display resolution depends on the laptop (graphics card) and the external display that is connected to the port replicator to Port Hi-Speed.

  The internal graphics INTEL QM57 (incorporated into the Portégé R700) overview card provides this info:
  http://www.Intel.com/products/Notebook/chipsets/QM57/QM57-overview.htm
  + This chipset supports the DisplayPort interface * with a resolution up to 2560 x 1600. +

  Therefore, check the properties of the external monitor.

• USB 2.0 Port Replicator II PX1173E-1PRP-Vista drviver

  Hello
  Sorry, I found that this problem has been resolved in 22.6.07:

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=88624#88624

  but this time, I have a similar problem and I have not found drivers cited in "driver page. I have the Toshiba U400-14Z notebook, but this port replicator only work with the XP system. Thank you.

  Did you follow Chad s instruction how to find?
  I found there Vista Driver Package 4.94.071106 version

• Portege R500 - Slim port replicator monitor external activation question

  Hello
  I use a Toshiba Portege R500i and a thin replicator II

  I have the extensions mobile tosh running and set to activate the external monitor only on the dock. This works very well if the machine is open and connected, BUT if the machine is closed and will then sleep, I dock, turn it on, the mouse and the keyboard light upwards and the screen does not turn on. If blindly, I type my password, the screen is activated. Also, if I opened the laptop and log in to the external display is enabled.

  How can I get the screen to activate without logging in?

  your
  Bob

  Hmm.
  I think first of all you must update the Mobile Extension of TOSHIBA.
  Then, you must make sure that in the "TOSHIBA Mobile Extension" "Service of change of display" is checked and the release of 'the view' has the value 'Different internal/external of the Image' in the tab 'change of display Service.

  In addition the display driver update.

  I'm not very well if it will be a solution but it s m without a doubt worth a try!

• Portege R500: Slim Port Replicator II - headphones not working not

  Hello

  I have gor Portege R500 with Vista preinstalled Enterprise.
  It's maybe just me in dense (!) but I can't get the headphone jack to work when it is in the Replicator (and the Replicator does not have such a plug).
  The headphone jack works well when it is off the Replicator and the speakers connected it work very well also...

  I have played with the settings in vista and still can't make it work - any ideas?

  m

  Hello

  You must first check the Toshiba drivers for the last sounddrivers download page. Download and check if the problem occurs again. If not, everything is OK, but if not then come back and we'll talk more about your problem.

  Welcome them

• Re: Portege R600-10 q - Toshiba DVD Player a work stoppage

  Hello

  Please help me,

  I cannot use the DVD from Toshiba drive, whenever I open it, it appears windows windows saying that the application has stop working...

  When I see the error report appears "crash app"...

  I went to the Toshiba site to upgrade BIOS and did a Toshiba DVD Player download a new version and the problem remains the same...

  What can I do?

  Thanks and best regards,

  Hugo Cunha

  Hello

  I think it s just a software problem.
  There must be something wrong with your operating system, because in my case everything works correctly.

  To be honest I n don't know what's wrong with your Toshiba drive preinstalled and I think that most people can provide only a few suggestions, so here's my suggestion.

  First update the BONE to this early time.
  Then remove the old Toshiba DVD player applications.
  Reboot the laptop and then clean the BONES and the registry using CCleaner (free tool).
  Download the most recent DVD Toshiba drive tool (at that time v 1.40.20), then install again.

  Usually, this should help

• Re: Portege R600 - port replicator is compatible with regional products?

  Community of greetings from Toshiba,

  I need to buy laptops for several employees who are moving between the United States, the United Kingdom and the Middle East.
  The Portege R600 exist in all 3 markets, but each has a slightly different part number.

  The part number Replicator of compatible Port to the R600 is difference to the United Kingdom, the United States and the Middle East.
  Users would be able to dock their laptops in one of the 3 offices, because they travel extensively between each country.

  What's the Slim Port Replicator II (PA3603U-1PRP) and Slim Port Replicator III (PA3681E-1PRP) compatible with each of the products of the soil of Portege R600?

  United Kingdom Replicator of ports Slim Portege R600-11B (PPR61E-01G00CEN) III (PA3681E-1PRP)
  Middle East Replicator of ports Slim Portege R600-10 b (PPR61E-00F00MAR) 2 (PA3603E-1PRP)
  USA, Portege R600-S4201 PPR60U - 01700C Slim Port Replicator II (PA3603U-1PRP)

  Someone has an experience buy Toshiba products in the Middle East? Or needed to use Docking Stations in offices in several countries?

  Thanks in advance,
  Ted

  (I posted a similar request in the Forum we and receives no answer - http://laptopforums.toshiba.com/t5/Port%C3%A9g%C3%A9-Laptops/Port%C3%A9g%C3%A9-R600-US-UK-Middle-East/m-p/32060#M489)

  Post edited by: TedRNelson

  Hello

  I think that it shouldn't be a problem with the different Portege R600 in combination with the Slim Port Replicator 3.

  Portege R600-11b, R600-10 b belongs to the same series (PPR61E), that the R600 US belongs to the PPR60U, but this should t be a problem.

  As far as I know the different R600 from different regions are not really different (some belongs to the same series) as far as I know there could be a difference between some pre-installed applications and some modules as for example the card wireless network, but this should not affect the use of Slim Port Replicator 3.

  Cheers mate