Portege R600: SIM inserted but error: "device not found".

Similar Questions

• HP Envy M4 1115dx: Qualcomm QCA Atheros Driver Installation error | Device not found wireless adapter

  I just replaced my old HD with a new SSHD Seagate. Everything is going well until I tried to connect to internet in wifi wireless mode with. I think it was a pilot error because I just do a blank Windows 8 install on my new SSHD (hybrid drive SSD). So I went to find the Driver for the WLAN Module.

  HP is automatically detected my laptop model number and gave me a list of drivers. I selected "Qualcomm Atheros QCA90000 series Wireless LAN Driver for Microsoft Windows" under the list of Driver Network in the menu dropdown.

  In the middle of the installation of this driver, I was arrested and met a titled error message, "802.11a/b/g/n Wireless adapter device not found". Just below this title was a big red circle with a white X sign. Besides, he said: "the device may not be present or could have been ejected unplugged from the system. Abortieng the installation, please insert the card and try again the Setup program. »

  Below is a screenshot of what I mean.

  

  Problem solved. I uninstalled all the drivers but the Ralink. Think I know what may have caused this.
  
  The recommended for WLAN driver was based on a misinterpretation on behalf of HP. HP auto detected my laptop as a 1150la instead of the 1115dx model.
  
  I'm not sure why HP thinks that my model is another, but it may have something to do with the SSHD and thermal fan replacement I did before this error WiFi.

• Portege R600 of fingerprint problem: error: could not open the specified database

  Hello

  I am trying to give the registration of fingerprints for my Toshiba Portege R600-101 and I get the above error.
  I tried also on windows XP and Vista.

  Has anyone with the same problem or anyone suggesting a solution?

  I uninstalled the truesuite Access Manager but still the same problem.

  See you soon.

  Hello

  I noticed a new update for software fingerprinting for protected R600.
  Remove the old application of fingerprints, restart the laptop, clean the registry and the system using a 3rd party too (CCLeaner is free and not bad).
  Then reboot again.

  Download the fingerprint on the page of the European driver Toshiba Software and install again.

  Check it out!

• Portege R830 - external HARD disk error - "target not found device.

  Hi all

  I recently bought a 1HD R830 which has windows 7 as its OS.
  I have a few old external hard disks that were formatted on windows vista.

  When I try to use it on my new computer it says "target not found device.
  I called support for the external hardrive, who said this is an incompatibility problem and that I would need to re format external hard drives (and therefore lose all about them unless I copied them on a compatible hard drive).
  Is this true?

  Rather than go through the hassle to copy all data to another hard drive is there a way to make my new computer compatible with the external hard drive?

  Your help is very appreciated.

  See you soon,.

  Jason

  I have an old drive external HARD with images recorded on it and I use it for years with WXP, Vista, Win7 and now with Win8 too. There is no problem at all so I put t understand what could be wrong with your HARD drive.

  Do you have similar problems with other external devices connected to your laptop Portege?

• Airport Time Capsule device not found

  I have the time Capsule on the airport of the TB 3 802.11ac (bought 9/2014).  It integrates the latest version of the 7.7.7.  Just last week, I received the error device not found (.. .has been previously a part of your network... etc.).  The internet connection is always good and the component of the time capsule router still works.  When I unplug the device, it can find him but eventually will go down in a few minutes.  I also did a warm reboot, but some results.  Printer connected to the time capsule does not, nor does Time Machine back ups.

  Would be grateful of any advice on why the drive not found error continues to occur.  Thank you!

  You have Back to My Mac enabled on the Time Capsule?

  If so, turn it off for the moment in the AirPort Utility and restart the time Capsule.

• 3480CT, device not found driver Portege

  I have a problem,
  I have a laptop toshiba portege 3480CT and is not an operating system. I am trying to install win98 SE, but when it starts to install this message appears:
  device not found driver: "OEMCD001."
  Invalid device CDROM drivers selected

  : so, how can I get these drivers, the computer has only CD-ROM drive, FLOPPY No.. CDrom drive is a pcmcia drive.
  Please help me!
  :)
  I also tried to install XP pro but with bad results, it gives errors when it tries to start the windows installation...

  WHAT to do, any help much appreciated!
  Thank you

  Hello

  If you have installed WIN 98SE on the device you need Toshiba drivers and utilities.
  Win 98SE OS you install all the applications in the following order:

  Display drivers for Windows 95 (for S3M7 Savage MX/IX) V4.11.01.7006 - 7.02.88 - 01
  YAMAHA AC - XG Audio Driver for Windows 95/98SE V.4.07.1011
  Floppy disk Win98 companion W98C09
  Logitech MouseWare for Windows 95/98 V8.37 BLD246
  V5.77 - MR577ALL004 modem driver
  Driver for TEAC V.1.06t (FDD Version 1.08 t) USB floppy drive
  Driver drive disk USB for YE - DATA V.4.30 Beta
  Panning of Driver Support (panning.sys) V3.0 (included in the display driver)
  Multi Media Port Replicator IDE Driver V.1.1.2.0315 with the file catalog
  Driver NDIS for V.2.21 de MSIR3.0 (driver Win98 OBOE)
  Toshiba Fast Ether LAN adapter (Intel 82559) V.2.01
  HALLOC. EXE (included in the Toshiba utility) V2.0
  Toshiba W983480US utility
  PCMCIA. INF for Windows98SE (support ToPIC100) V1.0
  QFE Win98Gold/Win98SE QFE KB:Q239697
  QFE Shutdown QFE Q242934
  QFE DiskTsd.VXD V.4.10.2223 Q246387xx8
  NDIS QFE Q243199 QFE
  QFE Win98SE USB QFE Q241084
  Direct X 7.0
  Acrobat Reader
  The users manual PDF file
  File PDF Manuel Modem internal
  Multi Media Port Replicator manual PDF file
  Toshiba wallpaper
  MS URL security update

  For Windows 2000 / XP in this order:

  Display driver
  TVALD
  TOSHIBA Power 2 extensions
  Toshiba Utilities
  Toshiba Mobile Extensions
  Energy saving of Toshiba Display Driver
  Toshiba infrared driver
  Toshiba IDE driver
  Acrobat Reader 4.05
  Operating instructions online
  Online modem manual
  Online manual users to multimedia Port Replicator
  Audio driver
  Driver Modem
  Country select utility (included with driver modem)
  Copy Toshiba wallpaper in c:\winnt
  Apply Service Pack 1 for the system
  Activate "Show the components of the" unplug or eject hardware trayicon
  Reinstall the display driver to support the new graphik S3 chip

  All the drivers you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com/
  Please let me know if it has been successfully

  Best regards

• 15 15 HP - r208nl: start the device not found error (3FO)

  Hello

  I have this laptop from less-than-one-year-old (this guy: http://icecat.us/us/p/hp/l0n16ea/laptops-0889296492238-15-r208nl-26524145.html) and I have the Boot Device not found error infamous.

  I'm not sure if this is relevant, but the problem occurred a few weeks after the upgrade to Windows 10 (when bought, laptop had Windows 8.1, probably an update of Windows 7).

  Also, I noticed this basic operation to during the priming phase take a long time. For example, when I press F10, it takes about 1-2 minutes to bring up the BIOS configuration screen.

  There are a number of similar questions on this forum, but the proposed solutions do not apply to my case or simply do not work. Here's what I've tried so far, without success:

  • hard reset
  • reinstalling the hard drive
  • automated tools in the Recovery Manager (this tool you access by pressing F11 at startup) *.
  • chkdsk and identical from the command prompt (to which I have access from the Recovery Manager tool) *.

  Note that even if the material for the HP PC Diagnostics tool failed hard drive test, apparently I can access my files on the hard drive of a Linux Live CD/USB (I managed to access it during a previous attempt, do not know if it can be reproduced).

  I can't test the drive on other PCs (which I have another laptop which I can plug the drive may be defective), not I can try to connect another hard drive non-offending for verification (as I did not).

  Any suggestion?

  They gave me no installation CD/DVD (I guess I had to use the recovery partition). In case I need a new installation, how can I retrieve my serial number?

  the hard drive is not accessible, I can't access Recovery Manager simply by pressing F11, I had to use a USB recovery media

  CHKDSK and even produce this error message: "cannot open volume for direct access.

  It looks like your hard drive is not/is a failure. Guarantee would provide a new replacement - and probably send recovery media free since did you not make it yours.

  You can make a Windows 10 usb or dvd using the free download of Ms. No license key is necessary since it has been activated at the same time on the machine.

  https://www.Microsoft.com/en-us/software-download/Windows10/

  Read the guide here by reinstalling an previously active Windows 10:

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error message is Boot Device not found, Hard - Disk (3F0)

  Hello!

  I have PC HP Pavilion dv6 with operativ system windows vista Entertaiment. I got an error as Boot Device not found. Please install an operating system on your hard drive. Disk-hard (3F0) Recovery does not work and received the error 100a

  Please help me

  Kamal

  It seems that the hard drive has failed and needs to be replaced. Laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 320GB hard drive you can use a 500 GB hard drive but not a hard drive of 250 GB.

• The HP imaging device not found... Error 8 [(1, 0,-2147024770)]

  -New installation of Windows 7 64 bit with all the updates of Windows installed.

  -HP OfficeJet Pro L7500 connected via ethernet / DHCP.

  -I get the following error message after you install the full version of the software:

  The HP imaging device not found...  Error 8 [(1, 0,-2147024770)]

  -Two other computers on the network, they get the error and can scan

  Troubleshooting steps already taken:

  1. uninstalled and reinstalled the latest version full

  2 carried out allong uninstall_L3 and uninstall_L4 with a reboot and reinstall about 4 times.

  3 sanning via 'Paint' works very well.

  4. the 'Windows Image Acquisition' service is started.

  5 Windows firewall is turned off.

  6. print jobs.

  7 watch Jet Pro L7500 Office properly in the device under "Imaging devices" Manager

  Nice try, but this isn't an answer very nonsense similar to most of the HP answers I've seen on the forums.

  -J' already have the l3 uninstall and reboot, as already indicated in my original post.

  -L' computer already has the latest version of Flash - over this software has nothing to do with communicating with the scanner.

  -The software is already downloaded from HP.

  However, I have repaired and it is perhaps what made him.  I'm not positive:

  -J' ran 'bpd_scan_Carrier.msi' which is in the folder "setup\bpd_scan" by right-clicking and choosing "update".

  -J' also ran "BPDSoftware.msi" which is in the folder "setup\bpdsoftware" by right-clicking and choosing "update", but I don't think that it did.

  -J' have also installed the Photosmart program but I don't think that that had nothing do with it.  When you run HP diagnostics program, it is said that what needs to be installed for scannig work.

  Thanks HP for all the major recommendations, I read in aid groups...    It is sarcasim in case your wondering you.

• Device not found, but internet work

  I have an Airport extreme with a capsule 2 TB that I use as a backup file.

  All of a sudden I can't connect to the airport time capsule. When I launch the airport utility, there is an orange triangle/exclamation point that fits the description "device not found". The router works well, since I am connected to internet (at this time).

  I tried to unplug the unit and time capsule comes back for about 2-3 minutes until the same problem occurs again. Factory of Soft and hard resets produce the same results. I know this isn't my macbook pro because it does the same thing on my phone as well.

  You have Back to My Mac configured on the TC with your AppleID?

  This has happened to me and when I removed my AppleID and disabled Back to My Mac it ceased to occur and the TC became visible again.

  I hope that Apple will fix this soon but it would pay record a call of support with Apple on this topic as well.

• When I try and send a file to my laptop I get this error: "bluetooth device not found please make sure that your bluetooth device is propably connected and turned on."

  original title: BLUETOOTH PROBLEM Please HELP!

  When I try to send a file from my computer to my cell phone an error message appears saying "bluetooth device not found".

  Make sure that your bluetooth device is propably connected and turned on. »

  In addition, the mobile is unable to send any file to computer th.

  I've already matched the mobile with the computer and I use windows 7 please help.

  
  

   

  When I try to send a file from my computer to my cell phone an error message appears saying "bluetooth device not found".

  Make sure that your bluetooth device is propably connected and turned on. »

  In addition, the mobile is unable to send any file to computer th.

  I've already matched the mobile with the computer and I use windows 7 please help.

  
  

  Hey xtheultimatethinkerx

  Here is the vista forums

  Try the repost in Forum windows 7 the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

  Walter, the time zone traveller

• I have a hp mini 311-1037nr who recently failed to start. data error is "boot device not found.

  My hp mini 311-1037nr does not start. Its running windows 7 and no changes have been made. Error message is "boot device not found. It will not run a hard drive test, gives "the hard disk does not exist '. Tried not to reset the default settings of the BIOS also no luck. any ideas?

  Drive appears you in the BIOS? If not, and if reinstalling it does not help that I assume safely that the hard disk is dead.

  You can also try to download/creation of the various Linux Live boot floppies [Unbuntu, PartedMagic, etc.] to confirm that your other components are not at fault. If you can start and run a live linux OS then your other components of the system may very well.

  You can also remove the drive of your machine and install it as a secondary drive in another computer or a disk to see if you can access it.

  You can also run a HDD diagnosis by accessing your site of hard drive manufacturers and download/creating a diagnostic boot disk.

• Error 404 - not found listenerConfigure but not with the apex page

  Hello
  
  I just installed the listener APEX 2.0.1 as a stand-alone installation.
  I don't use EPG.
  
  I get the error 404 - Not Found When I pass in my browser the url:
  
  http:// < My Server >: 7777/apex/listenerConfigure
  
  but I have the correct application page when I get home:
  
  http:// < My Server >: 7777/apex
  
  Does anyone have an idea about goes wrong with that?
  
  Kind regards.

  Hello

  http:// : 7777/apex/listenerConfigure

  This URL does not exist for APEX listener 2.0.1 because the web configuration interface has been removed with 2.0. There was improvements to the command line interface to configure the listener of the APEX and there is a new interface, you can use with SQL Developer since 3.2 (current version 3.2.2 is recommended).

  Always take a glance the documentation that matches the version of software you are using. In your case, it would be the [url http://docs.oracle.com/cd/E37099_01/doc/doc.20/e25066/toc.htm]APEX earphone 2 Installation and Configuration Guide.

  -Udo

• HP Deskjet 3054: Printer works but not the Scanner (device not found)

  Configuration: Windows 8 Lap Top with a HP Deskjet 3054 directly connected via USB

  Printer - it works

  Scanner - when you run the Application "Hp Scan and capture ' it comes back and says"device not found ".

  I tried - I ran 'HP print and scan doctor '.   Everything is OK except the "HP Scan".  He said that it was not able to find the HP Scan software on my computer.   When I went on HP customer support site to download it, I couldn't find it.  There is nothing that I could see which says "HP scanning software".   So this software HP Deskjet full functionality and drivers what I should download and install?

  BTW, the "HP Scan and Capture" application allows to work perfectly.  Not sure why it isn't now.

  Hello

  When changed the type of network to a USB connection? scanning HP and Capture app support network scanners, it does support a USB connected device:

  http://support.HP.com/us-en/document/c03478505

  In the HP Deskjet 3050 software select scan a Document or Photo and check if this can work...

  If the same persists, unplug the USB, uninstall the HP Deskjet 3050 basic software drivers from programs and features, then download and reinstall the most comprehensive software features again.

  If you prefer to continue to use the HP Scan application capture &, open the HP Deskjet 3050 software, click the utilities tab, click the printer installation software & and select Convert USB wireless to connect the printer to your network. then the Scan & Capture app should detect the scanner.

  Shlomi